IMPROVEMENT TO SECURITY INFRASTRUCTURE AT AF STN BAREILLY

Amount

Demolition of plain cement concrete (unreinforced) of any mix / grade in ground floor and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

Dismantling carefully existing barbed wire fencing any type complete all as specified& directed.

Excavating in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth and getting out in soft / loose soil for foundation, laying of cables/ pipes, foundation of poles, locating faulty LT cables and stay assembly etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and exc. 1.5 Mtr in width but not exc. 3.0 Mtr deep and getting out in soft / loose soil complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and as directed.

M&L PCC 1:4:8, type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

Returning , filling in , including spreading , leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials exc. 1.5 Km but not exc. 5.0 Km and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed

Removing surplus excavated materials n.exc. 50 m but and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed

M & L for reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in footing for columns, foundation beams, plinth beam etc complete all as specified & directed. (Note: Reinforcement and Formwork shall be measured and paid separately under respective item of this Schedule)

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in columns / pillars / post & struts etc complete all as specified and directed. (Note:- Reinforcement and formwork shall be measured and paid separately under respective item of this Schedule)

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in wall , retaining wall , basement wall, blast wall and the like of any thickness etc complete all as specified and directed. (Note:- Reinforcement and formwork shall be measured and paid separately under respective item of this Schedule)

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in culvert slab of any thickness etc complete all as specified and directed. (Note:- Reinforcement and formwork shall be measured and paid separately under respective item of this Schedule)

Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of plinth beams and similar work for rough finished flat surfaces of concrete etc complete all as specified and directed.

Form work to sides of square or rectangular pillars, posts, struts, piers, column and stanchions for fair finished surfaces of concrete etc complete all as specifed & directed.

Form work to sides of concrete wall, retaining wall , basement wall, blast wall , and similar works above top of footing including attached pillasters etc for flat and fair finished surface etc complete all as specified & directed.

Form work to suspended slab such as culvert slabs, floor slabs landing and similar work with fair finished flat surface of concrete etc complete all as specified & directed.

M&L for TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending, bindings spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc complete all as specified and directed.

All as per Srl item No. 20 but 6 to 8 mm dia bars .

All as per Srl item No. 20 but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for 80 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf / Sqcm in short lengths laid in or inserted in RCC wall as weep holes complete all as specified and directed.

M&L mild steel screw bolt (machine made) of 16 to 20 mm dia with hexagonal or square head one end and screwed the other or screwed both ends, each screw end to be fitted with washer and one hexagonal or square nut, length of bolt exc 22.5 cm but not exc 30 cm long etc complete all as specified & directed.

S & F 8 mm thick plain or chequred MS Plate confirming to Fe-410 Gde E- 250 in square and rectangular, cut or notched (ordinary and counter sunk) forming holes, including welding etc complete all as specified & directed.

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting welding and similar work conforming to Fe-290 Gde E-165 etc complete all as specified & directed.

Supply and fix in diamond shape high strength steel punched tape concertina coil 1050 mm dia (in specified stretched position) hot dip galvanized coated with CLR anti corrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor wire with the help of hog rings (14 SWG) in angle iron bracket/frame over boundary wall etc complete all as specified and shown on drawings/ directed. (Note:- Razor wire and angle iron frame/bracket shall be measured and paid separately)

Supply and fix razor wire 2.24 mm dia with 20 mm wide & 0.5mm thick razor strip fixed with clamps in rows in angle iron bracket/frame over boundary wall etc complete all as specified and shown on drawing and directed. (Note :Each line wire to be measured separately for payment ).

M&L for rendering 15 mm thick on on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair including taking down cement plaster with raking of joints on existing surface complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair including raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc.complete all s specified and directed.

M&L for prepartion of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified & directed.

M&L for applying two coats of camouflage/ weather coat paint on walls, cornices etc over a coat of exterior wall primer on newly plastered surface of wall or fair finished concrete surfaces etc including preparation of the surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coat of camouflage/exterior weather coat paint on wall complete all as specified and directed.

S&F 300 mm x 300 mm x 300 mm size wire crates of 4mm dia GI wire filled with 40 mm crushed stone aggragate behind the weep holes provided inside the soil all as specified & directed.

M&L for mild steel framed work such as grills, grating etc with ends of bars shouldered and or reveted into spikes, framed guard bars, , barred iron doors, ladders, framed balusters, walk ways, railing, cooler platform, frame work of water tanks and similar work including welding conforming to Fe-290-0 & grade E-165 etc suitably fixed in position complete all specified and directed.

Material and labour for providing sand cushioning with fine sand including filling, spreading, levelling Punning/compacting in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. (Punned/Compacted thickness shall be measured and paid separately)

Supplying and laying old size fly ash bricks laid adjacent to each other with axis of bricks perpendicular to the axis of cable for cable protection complete all as specified and directed.

Supply, laying & testing XLPE insulated heavy duty electric cable with aluminium conductor, 1100 V grades, cross sectional area 25 Sqmm 3.5 core complete all as specified & directed.

Supply, laying & testing XLPE insulated heavy duty electric cable with aluminium conductor, 1100 V grades, cross sectional area 16 Sqmm 4 core complete all as specified & directed.

Supply, laying & testing XLPE insulated heavy duty electric cable with aluminium conductor, 1100 V grades, cross sectional area 10 Sqmm 4 core complete all as specified & directed.

Disconnecting & taking up or down existing unserviceable street light / solar lights / wall mounting light 4x 24 watt / 250 watt any description and in any position complete all as specified & as directed.

S&F LED street light green line in a road lightening luminiaries with high power LED 72 watt & unique peanutto ensure uniform light distribution, higher spacing between pole and maintenance free system complete all as specifed & directed.

S&F shock proof rust proof fire retardant non transparent Kiosks pole box of size 310mm x 210mm x120mm made of engineering plastic one piece moulding for out door duty with four nos of aluminium bus bar of 60 amps capacity mounted on DMC insulator, 10 Amp MCB SP with aluminium lugs of suitable size upto 50 Sqm including 02 Nos 40x3 mm F.I clamps nut, bolts washer etc and duly painted both side with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling of existing unserviceable complete all as specified & directed.

S&F G.I. pipe for street light bracket on LT steel tubular swaged pole made with 40 mm dia GI pipe medium grade of 1.5 metre long, bend to shape and fixing with suitable size of flat iron clamp 2 Nos of minimum size 25 x 3 mm including nuts, bolts and washers & connection complete including two coats of synthetic enamel paint over a coat of red oxide primer complete all specified and directed.

Supply and errection of steel tubular pole swaged type 410-SP 22 (LT 8.50 mtr long pole) complete confirming to IS: 2713 complete with cast iron base plate, pole cap, mild steel bolt, nuts and screws complete all as specified including consisting of following works:- (a) Excavation in trenches not exceeding 1.5 mtr wide & 1.65 mtr deep for pole foundation & getting out in ant type of soil , returning filling in the excavated of soil after fixing the pole in foundation ramming earth around in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 mtrs complete all as specified and directed. (b) M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete for padding of size 600mmx600mm x 150 mm cross section under pole foundation complete all as specified and directed. (c) M&L for providing PCC 1:3:6, type C-2 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete for pole of size 600mm x 600mm x 1500 mm complete all as specified and directed. (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminum paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block. (e) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and directed. (f) Painting of coping with cement based paint all as directed. NOTE : Manufacture's test certificate will be produced before execution work. (g) M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for coping above GL 300 mm height & 150mm tapered.

M & L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick directly burried in ground(earthpit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5 m below the normal ground level with and including provision of earth test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled and screwed with and including 3 nos. 8 mm dia 25 mm long hexagonal head GI screw and necessery connection complete, connected to GI strip 32x 6mm dia by means of bolts, nuts, check nuts and washers of GI or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40mm graded stone aggregate, coping shall be in PCC(1:3:6) type C-1 using 20mm graded stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM(1:4), funnel with wire mesh including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm dia MS TMT bar @75mm C/C both ways, charcoal dust and common salt all as shown in electrical plate no. 3 of SSR part-1 (2009) inclding all necessary excavation & earth work and removal of surplus soil to a distance not exc 50m and providing connection points with Galvanized MS bolts & washers as required and connection from earth test point to earth electrode with sameGI strip alongwith protection pipe (upto a distance of 7.5 mtr is included in unit rate) and testing on completion complete all as specified and directed.

S&F PVC insulated, sheathed aluminium conductor cable of size 3 core 1.5 Sqmm duly passing through the holes of existing steel pole / street light brakets including necessary connection at pole mounted street light junction box and at the street light fittings all as specified and directed.

Dismantling of electric LT feeder pillar box of any size and capacity including all electrical connection complete all as specified & directed.

Supply and Replacement of Bus Bar Chambers with (3P+1N) 04 Nos 100 Amp Aluminium bus bar 415 volts complete all as specified and directed.

Rahul Construction India Pvt Ltd

NITYA NAND AND SONS CONTRACTORS PVT LTD