Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC | L1 | Accepted-AOC ok | |
| 2 | L2₹26.6 L+₹7.6 L (40.0%)Rejected-AOC 37 205 A 2 A 1 BUNDHU KATRA GWALIOR ROAD AGRA 282001 | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-AOC ok | |
| 3 | L3₹32.8 L+₹13.8 L (72.8%)Rejected-AOC HOUSE NO 04 NEW SARASWATI VIHAR NEAR PAWAN VIHAR PHASE 6 OVER HEAD TANK BAREILLY 243006 UP | BAREILLY | BAREILLY | UP | 243006 | L3 | Rejected-AOC ok | |
| 4 | Rejected-Technical | - | Rejected-Technical As work load excess |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
MISC REPAIR WORKS FOR THE AREA IN ZONE II AND III UNDER AGE B/R II AT GE WEST BAREILLY
2022_MES_534252_1
8069/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST BAREILLY
SCANNED COPY OF ENLISTMENT LETTER IN MES IN RELEVANT CLASS CATEGORY SCANNED COPY OF APPLICATION ON LETTER HEAD OF FIRMSCAN COPY OF DD OF RS 500.00 IN FAVOUR OF GE WEST BAREILLY FROM ANY NATIONALISED OR SCHEDULED BANK SCANNED COPY OF REGISTRATIO
6 documents required · 6 mandatory
₹500
Yes
GE WEST BAREILLY
₹56,000
Yes
7 Sept 2022
28 Jun 2022
1 Aug 2022
28 Jun 2022
29 Jul 2022
16 Jul 2022
29 Jun 2022 - 15 Jul 2022
Amount
Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc
M&L for Brickwork with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius .
Demolition of cement concrete (un-reinforced) including terrazzo, tiling etc of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Supply only liquid water proofing compound all as specified and directed( Make : Dr. Fixit of pidilite or equivalent)
M&L for cement concrete type d2,1:4:8 (using 20 mm graded stone aggregate) as in mass concrete complete all as specified and directed
M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed
Dismantling floor, stone, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed.
M&L for glazed coloured ceramic tiles 450 x 350 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.
M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm (400 x 400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.
All as per Serial item No 09 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed
M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed
All as per serial item No 11 but as in vertical surfaces incl plastering 10mm thick in CM 1:4,complete all as specified and directed
S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over a scree bed of 15mm thick CM 1:6 etc complete all as specified and directed
Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed
S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.
M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.
M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying three coat white wash after preperation of newly plastered surface including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified
M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling using CM 1:4 finished even and smooth without using extra cement and then applying three coat of white wash after preparing the surface including Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed
S&F PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc.
S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.
S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.
S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed
S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap.
S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed
S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.
S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed
S&F in repairs waste fitting 32 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed
S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed
S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.
S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.
S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.
S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.
S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.
S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed.
S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs.
S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.
S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.
S&F in repairs Chromium plated toilet paper stand as per directed by engg-in-charge
S&F in repairs Chromium plated towel ring as per directed by engg-in-charge
S&F in repairs glass shelf with chromium plated brackets of suitable size as per directed by engg-in-charge
S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm.
S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed.
S&F aluminum anosided handle 150mm long of extruded section and fixed.
S&F 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.
S&F Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed
S&F pillar tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed
S&F stop cock/ angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed
Dismantling of asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings
M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts
S&F in repairs prepainted galvantunm aluminium zinc coating GI based corrugated sheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of exicting roof covering as specified and directed by engg-in-charge
All as per item above but but plain galvalume sheet.
S&F aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size : a) Single Groove Section: 82.50 x 38 x 1.20 mm thick b) Double Groove section: 82.50 x 38 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partatio complete all as specified.
M&L for Aluminium grill of size of grid 75 mm x 75 mm x 5 mm thick and fixed with machine screw and all as specified and directed
S&F Anodised aluminium window , ventilator shutters and kitchen cupboards, side hung type/ slidding type without sash bars, alumimium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber packing, anodised aluminium snap beading screws anodised aluminium fittings such as ped stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified for add powder coating (minimum thickness of powder coating 50 micron)
S&F Anodised aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron)
S&F Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron)
S&F Sheet glass, ordinary quality and glazing with oil putty in square but exc0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture
S&F Mortie lock, verticle type size 100 mm mild steel
M&L for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per RM and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) complete all as specified and directed.
Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as directed.
S&F Stainless steel plain baskets 15" wide & 8" in depth for kitchen cabinet in repairs.
S&F Stainless steel plain baskets 15" wide & 6" in depth for kitchen cabinet in repairs.
S&F Stainless steel cutlary baskets 15" wide & 8" in depth for kitchen cabinet in repairs.
S&F Stainless steel large plate baskets 15" wide & 8" in depth for kitchen cabinet in repairs.
S&F Stainless steel small plate baskets 15" wide & 8" in depth for kitchen cabinet in repairs.
S&F Stainless steel cup & saucer baskets 15" wide & 8" in depth for kitchen cabinet in repairs.
S&F Stainless steel bottle guard baskets 6" wide for kitchen cabinet in repairs.
S&F in repairs Hydraulic chanels 20" long for sliding of SS baskets in kitchen cabinets.
S&F in repairs Vitreous china counter top wash basin snow white oval size 560mm x 400mm including PVC waste pipe, PVC connection 450 mm long ,32 mm bore CP waste coupling ,china & plug, brackets etc complete all as specified and directed (Make :- Cera Cat No S2030103)
S&F in repairs Vitreous china counter top wash basin white size 600mm x 400mm including PVC waste pipe , PVC connection 450 mm long ,32 mm CP waste coupling ,chain & plug, brackets etc complete all as specified and directed (Make :- Jaquar - Cat No SLS-WHT 6601 )
S&F in repairs Vitreous china wash down water closet single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 655x665x760, S trap-300mm including connection to drain pipe etc complete all as specified and directed.( Make- Jaquar CAT No. LYS-WHT-38851S)
S&F in repairs Vitreous china wash down water closet snow white single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 685x365x745, S trap-300mm including connection to drain pipe etc complete all as specified and directed ( Make- CERA CIMONA- S1013122)
Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed
M&L for double charged (nano technology) polished ceramic tiles of size 1200 x 800 mm of thickness not less than 9-10 mm including 15 mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified and directed
All as per Serial Item above but in skirting/dado including 10 mm thick cement plastering as in backing coat in CM 1:4 including dismantling of old tiles complete all as specified and directed.
S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.
S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.
S&F in repairs vertical venetian blind of 100 % polyster of width 100 mm and thickness 0.45-0.63 mm with tolerance (+- 0.04mm) of light grade 4-6 with aluminium channel complete all as per manufacturer instructions and as directed.
M& L in repair corner shower enclosure with door on wall panel size 1200X1950 thickness of glass 8mm Make Jaquar, cat part No 1840-W- JSE-CHR-840W12 12 SX complete all as specified and directed .
M& L in repair Wall out let Dia 30 mm ,40 mm long round shape with 15 mm thread to connect hand shower pipe and flange Make Jaquar Cat NoSHA -CHR -1195 R complete all as specified and directed .
M& L in repair Sliding rail 19 mm dia and 600 mm long round shape with hand shower holder and soap dish Make Jaquar Cat No SHA-CHR -1187 complete all as specified and directed .
M& L in repair Hand shower 75 mm dia cylindrical shape multi flow (Normal ,massage and mist) ( ABS body chrome plated with grey face plate ) with rubit cleaning system Make Jaquar cat No HSH -CHR- 1787 complete all as specified and directed .
M&L in repair towel rail 600 mm long of Jaquar cat part No- ACN- CHR- 1111NM complete all as specified and directed
S&F in repairs Stainless steel soap dish make -silver line model No. SSD-701, all as directed.
M&L for 15-18mm thick Udaipur Green Marble, machine cut & polished, bedded and jointed in grey cemet slurry including rounding edges and making hole if required in 15 mm cement mortar beddin in repairs.
S&F Vitreous China Urinals Bowl type flat back, white 465x355x265mm with grating, union for discharge and waste pipe but excluding flushing cistern.
M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed.
M&L for plaster of paris fancy moulding pattern in corners of ceiling in triangula shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.
Notes:- (a) Materials not included in sch of credit and debris from the dismantling having lowest value/Nil value shall be the property of department. The same shall be removed/ disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against losses/theft/deterioration etc till the same are deposited by him in MES Store yard (b) The contractor or his authorised representative shall attend office of AGE B/R daily at 0830 hrs on all working days to take orders/instructions regarding the jobs to be done. A proper record of jobs ordered and completed shall be entered in a register duly signed and dated by Engineer-in-Charge and contractor. (c) Penalty shall be imposed on the contractor for not completing the jobs in time bound manner as under :- (i) Not completing the jobs requiring one tradesman within 24 hrs - Rs 300/- per day per job (ii) Not completing the jobs requiring two tradesman within 48 hrs - Rs 500/- per day per job. (iii) Not completing the jobs requiring more than two tradesman within 7 days - Rs 1500/- per day per job (d) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects.
Note:- Tenderers may note that amount of credit Rs 9734.00 will be deducted from the total amount arrived, at the time of Acceptanceof contract.
Jain construction co
S S CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .