Purchase of office furniture equipments and furnishing in HSVP new office Sector 8 UE Ambala

Amount

TABLE NS The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm.

NS Work table - 4020 size shall be 1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .

NS Enzo Table - 4020 size shall be 1200 Width mm x 600 Depth mm x 750 Height mm . The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping .There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. It shall have only 1 drawer attachment .

NS Computer Table - 4020 size shall be 1200 Width mm x 600 Depth mm x 750 Height mm . The table top shall be made of pre- laminated particle board with 18 mm thick and 15 mm thick understructure covered with PVC lipping .There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. It shall have only 1 drawer attachment .

CHAIR NS ACE high Black chair :-The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The neckrest assembly consists of upholstered neckrest inner(material-poly propylene) with moulded polyurethane foam and polyster fabric. upholstered inner shall be fixed to neck rest cover. neckrest shall be fixed to back assembly through neckrest spline. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 109.3 to max 124.4 cm. Seat height - min 45.5cm to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. Product should be Greenguard Gold,Indoor advantage gold,Griha,BIFMA,Green pro certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuer's website.

NS Bravo high black chair - The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 64.5 cm (H). The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min93.5 to max 104.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.Product should be Indoor advantage gold, Griha, Greenpro ertified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuer's website.

NS Oxbo mid black chair - The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 69.5 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment shall has an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 42.5 to max 54.5cm, Height - min97.0 to max 109.0cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Product should be Indoor advantage gold, Greenpro ertified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuer's website.

NS Motion visitor chair Chair Type Without Arms. Type of Seat and Backrest Padded with Polyurethane Foam. Frame Type Cantilever. Castors Without. Type of material (other then wood) used in Polythene cane Chair NOT APPLICABLE. Material of Fabric Back Cover polyster. Thickness of Plywood used in Backrest IN MM (±1 mm) N.A. Frame Material ERW pipe. Material of Fabric of Seat Cover fabric. Thickness of Plywood used in Seat ±1(mm) N.A GSM/Thickness of Fabric ±5 (Gram per Sq Meter) 250 Gram per Sq Meter. Arm Material NA. Thickness of Polyurethane Foam Used in Backrest IN MM (+/- 3 mm) 40 mm. Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm. Size of Material (mm) 2 mm thick 25 mm tube. Chair Height ±15(mm) 890 mm. Seat Depth ±10(mm) 450 mm. Seat Width ±10 (mm) 470 mm. Seat Height IN MM ±5(mm) 430. Backrest Width ±10(mm) 430 mm Backrest Height ±10(mm) 450 mm. Product should be Greenpro,BIFMA, Indoor advantage gold , greenguard gold certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuer's website.Product should be Greenguard Gold,IAQ Gold, certified. The certiifcates mentioned in the specification must be issued by an authorized certificate issuer. The certificates must mention product name along with manufacturers name. The certiifcate must be verifiable from the authorised issuer's website.

ALMIRAH NS Godrej Storewell Plain 1981 H X 916W X 486 D.

NS Godrej Minor Plain 1270 H X 765W X 440 D.

NS Slotted angle Rack 78" x 36" x 15" 6 Shelf total.

NS Slotted angle Rack 30" x 36" x 12" 3 Shelf total.

NS Godrej Pisa Center Table.

NS Godrej matrix Multiseater Common Arm.

NS Voltas water cooler fully steel Model - 150/150 Tank Capacity: 150 ltr.

NS Samsung Refrigrator (Cap. 192 ltr Including GST)

NS Aquaguard (A.C premeuim UV+UR)

YASHVIR KUMAR