Establishment of Gym in Matri Anchal building for Temple Trust Shri Naina Devi Ji Distt. Bilaspur (H.P.)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposalincluding stacking of serviceable material and disposal of unserviceable material complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge. (a) In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge (a) Of area 3 sq. metres and below

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-chargeCement mortar 1:6 (1 cement : 6 course sand)

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge:- Fixing with adjustable lugs with split end tail to each jamb (a) Profile "C"

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) stone aggregate 20 mm nominal size) complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge

Providing and laying 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand ) complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:- 15622, of approved make, in all colours and shades, laid sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 12 mm thick complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge (a) Size of Tile 800x800 mm

Providing and laying Vitrified tiles in different sizes water absorption less than 0.08% and conforming to IS:- 15622, of approved make, and manufactureres in all col;ours and shade in skirting , risers of steps , laid with cement based high polymer modified quick ste tiles based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm in all colours and shades, thickness, including grouting of joints (Payment forlaid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey thickness, including grouting of joints (Payment for the joints with white cement and matching pigments etc.,grouting of joints to be made separately) complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge.( a ) Tile 800x800 mm sqm

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections mm centre to centre with 25 mm long dry wall screws @(galvanising ) @ 120 grams per sqm i/c both side ) consisitng of main 'T" runner suitably spaced at joints to get required lenght and size of 24x28 mm made from .33 mm thick (minium ) sheet space 1200 mm centre to centre and cross 'T' of size 24x 28 mm made out of .33 mm thiock sheet 1200 mm long spaced between main T at 600 mm centre to centre grid of 1200x600 mm and secondary cross "T' of length 600 mm and size 24x28 made of (Minium) sheet to be inter locked at middle of the 1200 x 600 mm panel to from grid of size 600x 600 mm resing on periphery walls / partitions on a perimeter wall angle precoated steel of size steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in- Charge. (a) Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/ mK complete in all respect within all metres lead and lifts as per direction and best satisfaction of Engineer-in-charge .

Providing and fixing toughened glass panes in fixing of plain edge cover etc. (beading 40 mm x 12mm section with necessry screw including mitring of joints of 1st class dedor wood complete with all accessories as prer direction and best satisfaction of Engineer - in - charge.