06/2024-25/EDCR Replacement of Jarjer/Damaged wire,Pole,GI wire and other System improvement works under Business Plan 2024-25, EDD-II, Rampur

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

Jointing Kit (indoor) 3*300 sqmm

Jointing Kit) 3*120 sqmm

Jointing Kit) 3*70 sqmm

Jointing Kit (outdoor) 3*300 sqmm

33 KV Single TF Control Relay Panel

Bus isolater 800 amp 33 KV

Line isolater 800 amp 33 KV

33 KV fuse set

11 KV VCB PT 350 MVA

Top Channel

T-Off Channel

Dropper Channel

LT ABC Cable 3x50+1x35+1x16 Sqmm

LT ABC Cable 3x95+1x70+1x16 Sqmm

T/F Base Angle

100 KVA T/F

Junction Box 3 Phase

11 KV X-Arm MS Angle 65x65x6 MM

ST Pole 13 Mtr. Long

ST Pole 11 Mtr. Long

PCC Pole 9 Mtr Long

PCC Pole 8.5 Mtr Long

L.T. XLPE Cable 3.5 X150 Sqmm

XLPE Cable 3*120 Sqmm

AB Cable 3*120+1x195+1x16 Sqmm

11 KV 3*70 Sqmm XLPE Cable

AB Cable 1x16 Sqmm

AB Cable 1x35 Sqmm

Single XLPE Cable 1x6

Single XLPE Cable 1x35

LT AB Cable 1x16+1x25 Sqmm

ABC Cable 3x50 Sqmm

11 KV 3*300 Sqmm XLPE Cable

ACSR Rabbit Conductor

ACSR Weasel Conductor

ACSR Dog Conductor

Stay set Complete

Stay Wire (Kg)

Earthing Complete

Polymeric 33 KV Pin Insulator with Pin

Polymeric 11 KV Pin Insulator with Pin

Polymeric 11 KV Disc Insulator with fitting

other line meterial

Line isolater 800 amp 33 KV(Recived Back Site to Store)

Bus isolater 800 amp 33 KV(Recived Back Site to Store)

33 KV fuse set(Recived Back Site to Store)

Weasel Conductor(Kg) (Recived Back Site to Store)

Dog Conductor(Kg) (Recived Back Site to Store)

33 KV Control Relay Pannel(Recived Back Site to Store)

11 KV VCB PT 350 MVA(Recived Back Site to Store)

lT ABC Cable 3x95+1x70+1x16 Sqmm(Kg)(Recived Back Site to Store)

AB Cable 1x16 Sqmm(Recived Back Site to Store)

AB Cable 3*120+1x195+1x16 Sqmm(Recived Back Site to Store)

CT Unit Scrap(Recived Back Site to Store)

Gi Wire Scrap(Recived Back Site to Store)

Junction Box as Scrap(Recived Back Site to Store)

AI Scrap (in KG)(Recived Back Site to Store)

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

11 Mtr long STP Pole

9 Mtr long PCC Pole

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

11 Mtr long STP Pole

9 Mtr long PCC Pole

8.5 Mtr long PCC Pole

b) Double pole Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

13 Mtr long STP Pole

11 Mtr long STP Pole

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. b) Double Pole Structure

13 Mtr long STP Pole

11 Mtr long STP Pole

8.5 Mtr long PCC Pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of 33 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

Installation/fixing of 33 KV Single TF Control Relay Panel per RESPO Norms and as per direction of Supervising Engineer

Installation/fixing of Bus isolater 800 amp 33 KV per RESPO Norms and as per direction of Supervising Engineer

Installation/fixing of Line isolater 800 amp 33 KV per RESPO Norms and as per direction of Supervising Engineer

Installation/fixing of 33 KV fuse set per RESPO Norms and as per direction of Supervising Engineer

Installation/fixing of 11 KV VCB PT 350 MVA per RESPO Norms and as per direction of Supervising Engineer

Installation/fixing of 100 KVA T/F with proper connection in all respect per RESPO Norms and as per direction of Supervising Engineer

Installation/fixing of Junction Box 3 Phase per RESPO Norms and as per direction of Supervising Engineer

Dismentling of Damged Line isolater 800 amp 33 KV in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged Bus isolater 800 amp 33 KV in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged 33 KV fuse set in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged Weasel Conductor(Kg) in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged Dog Conductor(Kg) in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged 33 KV Control Relay Pannel in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged 11 KV VCB PT 350 MVA in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged lT ABC Cable 3x95+1x70+1x16 Sqmm(Kg) in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged AB Cable 1x16 Sqmm in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged AB Cable 3*120+1x195+1x16 Sqmm in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged CT Unit Scrap in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged Gi Wire Scrap in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged Junction Box as Scrap in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged AI Scrap (in KG) in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT ABC Cable 3x50+1x35+1x16 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT ABC Cable 3x95+1x70+1x16 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of L.T. XLPE Cable 3.5 X150 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of XLPE Cable 3*120 Sqmm as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of AB Cable 3*120+1x195+1x16 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of 11 KV 3*70 Sqmm XLPE Cable with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of AB Cable 1x16 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of AB Cable 1x35 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of Single XLPE Cable 1x6 sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of Single XLPE Cable 1x35 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT AB Cable 1x16+1x25 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ABC Cable 3x50 Sqmm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of 11 KV 3*300 Sqmm XLPE Cable with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Weasel Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of Damged Relay in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of conductor of Existing LT line in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of conductor of Existing HT line in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismentling of old existing AB Cable in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Dismantling of conductor of old Existing 33 KV line in respect of all as per RESPO Norms and as per direction of Supervising Engineer.

Resagging of old 11 KV line(Span) in all respect as per RESPO Norms and as per direction of Supervising Engineer.

Straigtening of Tilted Support in all respect as per RESPO Norms and as per direction of Supervising Engineer.

Tighting of loose Stay in all respect as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing 11 KV VCB Relay as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Relay for 33 KV Digital as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Relay for 11 KV Feeder Digital as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Barbed Wire per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Packing Piece and clamp with Nuts Bolts per RESPO Norms and as per direction of Supervising Engineer

Providing and painting of Red Oxide Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and painting of Alluminium Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp for T-Off with Nut Bolts as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Dead & Clamp with I Hook as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Danger Board with plate as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing F Bracket with Nut and Bolt per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing 11 KV F Clamp with nut and bolts as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Alluminium Lugs as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer

Providing and fixingSuspention Clamp as RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Piercing Clamp for Junction Box as per RESPO Norms and as per direction of Supervising Engineer

To Install Tail Unit at LT site of the distribution Transformer 3 Nos. of Aluminium Bus Baar 50x6 Sqmm as per RESPO Norms and as per direction of Supervising Engineer

Supply installation, connection, testing and commissionin of maintinance free heavy duty earthing separate for transformer body and netural, GI Chemicel electrode of 50 mm Dia, wall thikness 16 gauge and 3 meter length with 60 kg bag of back fill compound (highly conductive, noncoreosive moisture retaining chemical complete with excavation , civil work including top 300 mm deep on brik thick masonery chamber with cast iron cover. the voltage betwen netural and earth should not exceed 5 volt and IR Value shall be less then 1 ohm. the earth resistance shall be as per IS 3034(eathing per DT 02 Nos) as per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Holding Clamp with Nut Bolts for X-Arm RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp with Nut Bolts RESPO Norms and as per direction of Supervising Engineer

M/s Phool Kumar Saxena