Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.7 L
EMD Value
₹7,800
Closing Date
2 Dec 2026, 2:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (Central Tender Cell)
Central Tender Cell, BMC, ICOMC Tower, Unit-9, Satyanagar
Provision of streetlight from ATM Square to Acharya Harihar College Square in Ward No. 14
2026_ORULB_146811_3
BMC-EE-Tender Cell-96/2026-27 dt. 18.11.2026
Open Tender
Electrical Works
Percentage
45 days
BMC AREA
Please refer Tender documents.
2 documents required · 2 mandatory
₹4,000
₹7,800
Yes
Office Chamber of EE(Electrical)
21 Nov 2026
21 Nov 2026
2 Dec 2026
21 Nov 2026
2 Dec 2026
21 Nov 2026
21 Nov 2026 - 25 Nov 2026
25 Nov 2026
120 days
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & installation of 9 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 90 mm & bottom dia 190 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 300X300X20 mm thick shall be welded (Inside & outside) with pole shaft, 4 Nos M24X850mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB (Hinged door), containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc) (Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) | 15 | No. | 22,850 | ₹3,42,750 |
| 2 | Supply & fixing of Hot dip Galvanized 1 Mtr. Long Double arm 50mm bracket suitable for carrying different wattage Street light for Octagonal pole.(Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) | 13 | No. | 2,500 | ₹32,500 |
| 3 | Supply & fixing of 48.4MM OD HDG ROUND Arm (1 Mtr Long) for Triple arm bracket suitable for carrying different wattage Street light for Octagonal pole.(Make- Utkal Galvanizers, Utkarsh, Bajaj/ Crompton/RR Ispat) | 2 | No. | 3,650 | ₹7,300 |
| 4 | Construction of R.C.C foundation for errection of 7 Mtr/ 8 Mtr / 9 Mtr Street light pole. | 15 | No. | 3,872 | ₹58,080 |
| 5 | Supply & Installation of 120 Watt ratings Streetlight with batwing spread in grey corrosion free powder coated aluminium pressure die-cast housing (ADC 12). The IP 66 (ingress protection) and IK10 (impact resistance) heat resistance polycarbonate with potted non-dimmable electronic driver should deliver an operating input voltage range of driver (volts) 140-275 VAC , Operating input frequency range of driver ( Hz) 50 Hz-60 Hz, Operating Temperature-10°C to 55°C, Driver Power Factor ≥ 0.90, Driver THD ≤10%, Driver efficiency≥90% and an inbuilt surge protection of 5KV and additional surge protection of 20 KV/10KA with working humidity range should be 0-95%. The streetlight should come with LEDs of CREE/Osram/Lumiled make with a LED Chip level efficacy of at least ≥190 lumens per watt and a system efficacy ≥ 150 lumens per watt with a CRI ≥70(±2) and CCT of 5700K -6500K (IESNA tolerance). The UV resistant polycarbonate 120° lens should provide a focused photometry to provide uniform lighting. The LED life span should be ≥50,000 Hours, Higher voltage Auto Cut- off ≥320 VAC with Phase-to-Phase sustainability of 8 Hours with short Circuit Protection and Reverse Polarity Protection. LED streetlight must have BS Certification. The fittings should be connecting through a 3 C Cup. Cable i.e, R Y E Connection Options. Minimum Warranty of the fitting should be 5 year. (Make-Havells/ Cromption/ wipro/ Philips) (As per direction of E-I-C) | 10 | No. | 9,367 | ₹93,670 |
| 6 | Supply & laying of following Copper unarmoured XLPE cables insulated ISI marked. (Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)
(a) 3cx1.5sqmm | 320 | Mtr. | 130 | ₹41,600 |
| 7 | Supply & laying of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)
(a) 2cx6sqmm | 430 | Mtr. | 164 | ₹70,520 |
| 8 | Supply & laying of 40 mm HDPE pipe for insert of cable laying. | 420 | Mtr. | 91 | ₹38,220 |
| 9 | Cable trenching in concrete as per RE specification for laying of cable. | 380 | Mtr. | 195.22 | ₹74,183.6 |
| 10 | Supply & installation of 40 A electronic Timer ON/OFF switch for automatic street light control with box (Make-L&T, Crompton, GIC) | 1 | No. | 16,101 | ₹16,101 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
DTCN_96.pdf
Tender Documents • 0.94 MB
BOQ_622385.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .