WBPWD/EE/PED/NIQ06 /2024-2025

Amount

Supply of non-inverter Split type Air-Conditioners of cooling capacity of minimum 21600 BTU/hr. Air Flow capacity must be 600 CFM & above. The units should be factory charged with R32/R410 A refrigerant only.The indoor unit should be compatible with wireless LCD remote controller with alphabetic error display like HP, LP,SPPR. (Make: O-General/Mitshubishi Heavy/Daikin as approved by EIC). Temparature distribution should be equal at every space of the specified room. [NS]

Supply of non inverter Split type Airconditioners of cooling capacity of minimum 18000 BTU/hr. Air Flow capacity must be 600 CFM & above. The units should be factory charged with R32/R410 A refrigerant only.The indoor unit should be compatible with wireless LCD remote controller with alphabetic error display like HP,LP ,SPPR. (Make: O-General/Mitshubishi Heavy/Daikin as approved by EIC). Temparature distribution should be equal at every space of the specified room. [NS]

Installation and Commissioning of hard/soft copper refrigerant piping, complete with fitting, elbows, bends, supporting arrangement on walls for Suction Line 5/8" OD with .7mm thick For 1.5 Tr 1.8/2.0 Conceale Split type AC(Make:Ryoku/Nippon). [NS]

Installation and Commissioning of hard/soft copper refrigerant piping, complete with fitting, elbows, bends, supporting arrangement on walls for Liquid Line 1/4" OD with .7mm thick For 1.5 Tr 1.8/2.0 Tr split type AC(Make:Ryoku/Nippon)[NS]

Supply & Fixing Pipe Insulation in 5/8" with 9mm nitrile rubber tube(Make:Accoroflex/Suprime)[NS]

Supply & Fixing Pipe Insulation in suction line 1/4"with 9mm nitrile rubber tube Suction Line (Make:Accoroflex/Suprime).[NS]

Providing and laying electrical cabling 3 Core 2.5sq. mm. Communication Cable (Make:Finolex/KEI/Polycab).[NS]

Installation, testing & commissioning of the above-said 2.0/1.5 Ton split AC incl. Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C. [NS]

Installation, testing & commissioning of the above-said 2.0/1.5 Ton split AC without Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C. [NS]

Installation of ODU on the roof top by fabrication of a platform of appropriate size made with 25x25x5 mm Angle and grouting the four legs on roof by making CC foundation including necessary accessories as per direction of EIC.[NS]

Drain water piping work out of 20mm dia PVC/HDPE harded pipes with Insulation, fitting,accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors.[NS]

Erection & Commissioning including lifting shifting Charges for 1.5 and 1.8/2.0 TR Air Conditioner.[NS]

SITC of complete time switch for controlling of 2 nos AC machine individually housed in SS double door phosphatised powder coated box with IP- 43 protection with electrical accessories & front door locking arrangement with all connection, a) 32A DP power contactor- 2 nos, Make- L&T /Siemens /BCH /Schnider, b) Daily and weekly programmable basis digital time switch, min switching time 1 min, 25 ON/OFF programs, 6 yrs battery backup, settable DST & key pad lock features - 1 no, Make- L&T /Siemens /BCH /Schnider, c) 32A DP MCB (Breaking capacity 10 KA, 'C' characteristics) for power circuit-1 no. d) 6 A SP MCB (Breaking capacity 10KA ' C' series ) for control circuit- 1 no. The work should be completed with all fabrications, wiring with suitable guage wires of not less than 4 sq mm copper wire for power wiring & 1.5 sq mm for control circuit, with suitable heavy duty terminal blocks, terminations etc. complete as per direction of the EIC.[NS]

SITC of complete time switch for controlling of 1 no AC machine individually housed in SS double door phosphatised powder coated box with IP- 43 protection with electrical accessories & front door locking arrangement with all connection, a) 32A DP power contactor- 1 no, Make- L&T /Siemens /BCH /Schnider, b) Daily and weekly programmable basis digital time switch, min switching time 1 min, 25 ON/OFF programs, 6 yrs battery backup, settable DST & key pad lock features - 1 no, Make- L&T /Siemens /BCH /Schnider, c) 32A DP MCB (Breaking capacity 10 KA, 'C' characteristics) for power circuit-1 no. d) 6 A SP MCB (Breaking capacity 10KA ' C' series ) for control circuit- 1 no. The work should be completed with all fabrications, wiring with suitable guage wires of not less than 4 sq mm copper wire for power wiring & 1.5 sq mm for control circuit, with suitable heavy duty terminal blocks, terminations etc. complete as per direction of the EIC.[NS]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Up to 250A Legrand- 8 way Enclosure (607723) [D-11/15]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Up to 160A Legrand- 4 way Enclosure (607913) [D-11/15]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

4Way (Legrand) Enclosure (607715) [D-10/14]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

160 A (Make- Legrand) [D-8/10]

100 A (Make- Legrand) [D-8/10]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 63 A(FP) (Make- Legrand) [D-5/6]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6-32 A SP MCB- Legrand make [D-6/7]

63A TP MCB- Legrand [D-6/7]

Supply and fixing 415V, 100A TPN SFU with sheet steel enclosure(Make- L&T) with HRC Fuses as out going on angle iron frame on wall. [D-3/4(a)]

Supply and laying of 3.5 core 95 sq mm Al arial bunched cable with stay wire on overhead with 4 nos 25x25x5 mm MS angle grouted on wall for holding the cable with necy cable hooks, fastner etc and necy connections.[NS]

Supply and drawing of 1.1 Kv grade XLPE insulated 3.5 core 50 sq mm Al PVC/XLPE insulated arial bunched cable with PVC/XLPE insulated massenger on the pole top with necy hooks and clips and over the ground with 2 nos 40 x 40 x 5 mm MS angle grouted on wall and necy accessories as required.[NS]

Finishing the end of following XLPE/PVC armoured or arial bunched cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

3.5 core 50 sq mm [F-5/8(b)(xvi)]

3.5 core 95 sq mm [F-5/8(b)(xviii)]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works as per GS.

20 mm size [ E-16/7(a) ]

25 mm size [ E-16/7(b) ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS.

2x(4 sqmm)+1x (2.5 sqmm) [ E- 9/1(v) ]

4x(16 sqmm)+2x (10 sqmm) [ E- 9/1(g1) ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

4 sqmm [F-5/9(ii)]

2.5sqmm [F-5/9(i)]

10 sq mm [F-5/9(iv)]

16 sq mm [F-5/9(v)]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/17]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(b)]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.S & F 230 V 25 Amps 3 pin Modular type Plug socket (Brand approved by EIC) with 2 module GI Modular type switch board with top cover plate flushed in wall & making necy. Connections with pvc cu wire and earth continuity wire etc. [E-17/5(a)]

MODERN ELECTRICALS

RASH ELECTRICAL WORKS