SPECIAL REPAIR TO JCOs MD ACCN BLDG NO P 342 IN CR CAMP

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced cut as required to facilitate demolition) such as in smoke exhaust and the like etc in any position and of any description not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete ground floor and paving n.exc 15cm thick below or above ground level complete all as specified and directed.

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:4) complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in hardstanding including necessary formwork and spike rolling or making impression of expanded metal while the concrete is green etc and including demolition of existing old cement concrete complete all as specified and directed.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe and cutting chases pinning in making good for for concealed water tubing complete all as directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F 15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.

S&F ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed.

S&F 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

M&L for rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.

M&L for preparation of scrapped surface/ new plaster surfaces of wall / ceiling and applying 2mm thick Asian acrylic damp proof wall care putty as per manufacturer instruction complete all as specified and directed. (work to be carried upto a height of 7.5m).

M&L for complete removing of existing treatment from wall / ceilling complete all as specified and directed. (work to be carried upto a height of 7.50m high)

M&L for preparation of primed surfaces of wall / ceiling and applying two coats of Apex paint ( Weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m) .

M&L for preparation of primed surfaces of wall / ceiling and applying two coats of Oil bound distemper complete all as specified and directed. .

M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

M&L for preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as directed.

M&L for Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including taking down existing pipe complete all as specified and directed

S&F 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, including taking down existing pipe complete all as specified and directedcomplete all as directed.

S&F cast iron 100mm bend (any radius) diminishing pieces or tapers (larger bore measured) with oval access doors fixed in repair complete all as specified and directed

S&F Cast iron 75mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed in repair complete all as specified and directed

S&F cast iron 100mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors fixed in repair complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floors and finishing the concrete surface fair and rough including demolition of old existing concrete complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Glazed ceramic coloured tiles of size 300x450 x 7mm thick, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM (1:4) finished rough to receive tiles complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L for 75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

S&F pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

S&F powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc fixed in repair complete all as specified. (Minimum thickness of powder coating not less than 50 micron) complete all as directed

S&F powder coated aluminium anodised windows/ventilators with side hung shutter and frame made with aluminium section with and including glass (as specified below) Aluminium section shall be of size:- Frame 65 x 40mm x 1.98mm thick, Top/bottom and side style/rails of Shutter - 44 x 47mm x 1.98mm thick, Glass : 5mm thick tinted glass fixed with rubber gasket with aluminium beading. Aluminium fitting such as peg stay, aluminium hinges, aluminium handle 100mm long, aluminium tower bolt 100mm long and including taking down existing and making good of wall surface with matching to existing surfaces complete all as specified and directed. .

S&F 5.5mm thick glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed.

S&F decorative aluminium grill weight not less than 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed

S&F 35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S&F 35 mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

S&F steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed size of section as per TD drg No.TD032 sheet 1/10 to 10/10.

S&F steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed size of section as per TD drg No.TD032 sheet 1/10 to 10/10.

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pane, including punching or drilling and glazing pins etc complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F 150mm long aluminium anodized handle cast type complete all as directed.

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) cat part No SQT-511KN or equivalent of Cera/Hindware

S&F 15mm dia chromium plated concealed stop cock, heavy body screwed both ends for iron or for union fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No.SQT-513AKN/ 513 BKN or equivalent of Make cera/Hindware

S&F 15mm dia chromium plated concealed stop cock, heavy body screwed both ends for iron or for union fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No.SQT-514AKN or equivalent of Make cera/Hindware

S&F Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No.SQT-526KN or equivalent of Make cera/Hindware

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

S&F PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for Vitreous china wash basin, white, flat back, size 550x400mm including bracket, 32mm brass CP waste fitting, PVC waste pipe fixed in repair complete all as specified and directed.

S&F 15mm dia pillar cock Super Delux with Aerator fixed in repair complete all as directed. Make- ESSCO (Jaquar) SQT-508KN or equivalent make of cera/Hindware

M&L for Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

M&L for Mild steel TMT bars 8mm dia bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F Chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.. Make : Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. Make : Hettich, Hafele, Butterfly

M&L for Marble work 18-20mm thick of any colour (of any type) work (table rubbed & polished) in cup board shelves and like with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

M&L for Rubberised polished chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M&L for 3mm thick frosted glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pane, including punching or drilling and glazing pins etc complete all as directed

S&F Brass chromium plated towel rail 600mm size fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

S&F Chromium Plated brass soap dish fixed in repair complete all as directed.

S&F Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. EOS-542N or equivalent of make Cera/Hindware

S&F 100mm dia chromium plated grating with/without hole fixed in repair complete all as directed.

S&F Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 914 mm x 460x 203 mm bowl size 405 mm x 354 mm x 203mm complete all as specified and directed. Make :- Make:- Prayag Cat part No.1239DM or equivalent in Blue star/Nirali.

S&F Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58mm, a pair of brackets, fixed in repair complete all as specified and directed

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F 150x100mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'S' complete all as directed by EIC.

S&F 32 mm bore PVC waste pipe for WHB approved quality complete all as specified and directed.

Taking down of existing sunken slab treatment form the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises as per following specifications:- (a) Cleaning and filling crevices, cracks and undulations cement sand mortar mixed with latex polymers such as Dr fixit Pidicrete URP or equivalent in ratio as recommended by manufacturer and then brushing the entire floor and walls of sunken area with neat cement slurry @ 3.00 kg/ sqm and laying 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) over sunken slab portion and finishing the top surfaces even and smooth without using extra cement . (b) Provision of 40mm dia PVC pipe spout projection 100mm beyond outer face of the wall of sunken floor to drainout water. (c) Apply two coats of acrylic cementitious water proofing coating (Dr Fixit pidifin 2K manufactured by M/s Pidilite industries Ltd or equivalent make as approved by GE as per manufacturer recommendations) and followed by a overlay protective layer of 15 mm thick screed/ rendering in CM 1:3 along mixed with liquid water proofing at appropriate ratio of approved make on all surfaces of sunken area after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating shall be followed as per manufacturers instructions.

M&L for repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective

M&L for taking down existing broken portion of upward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ)

S&F 18/19mm thick one side prelaminated colour PVC Sheet for cup board shutter and frame & fixed at site complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as specified and directed

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Shelf of PTMT 450 mm fixed with and including Chromium plated brass screws and wooden/plastic cleats (Prayag cat part No 191 & equivelant of skati Enterprises, R S Industries)

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed

S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed

Dismantling existing timber scantling 40 sq.cm and over in section in any position.complete all as specified and directed.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quqlity B)

Excavating in post holes soft/ loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for PCC 1:2:4 Type B2 using (40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

Excavation in trenches not exceeding 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding. 1.5 m in depth and getting out in any type soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.

Spreading and levelling of soil obtained from excavation in layers not exceeding 25cm and well ramming including watering as required complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radious built in cement mortar (1:6) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing complete all as specified and directed.

M&L for rendering 15mm thick plaster on brick work or concrete surface in CM 1:4 finished fair & even complete all as specified & directed.

M&L for hard core of broken stone gauge not exceeding 63mm, deposited, spread and levelled in layer not exceeding 15 cm thick watered & rammed to a true surface complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete, all as specified and directed.

Dismantling of existing roof tursses & housing and re-fixing after repair complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gaugethickness in roof covering and rubbish off the premises complete all as specified and directed.

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all specified and as directed.

M&L for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLS having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep of required size factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Note:- (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the same board with other switchs.

One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, one way switchs.

One bell point controlled by one, one way 6 Amp button switch.

Description all as per item No 106 here in before but point wiring with 2.5 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 10 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface as required including one run single core PVC insulated unsheathed 10 Sqmm FRLS cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

M&L for Sub main wiring with two single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 4 Sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface as required including one run single core PVC insulated unsheathed 4 Sqmm FRLS cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unserviceable submain wiring etc complete all specified and as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc.

S&F Switch piano, flush type, single pole one way, 5/6 Amp complete all specified and as directed

S&F Switch piano, flush type, single pole one way, 15/16 Amp complete all specified and as directed

S&F Socket outlet, multipurpose, 2 in 1, 5 pin, 5/6 Amp complete all specified and as directed

S&F Socket outlet, multipurpose, 2 in 1, 5 pin, 15/16 Amp complete all specified and as directed

S&F Bell push flush type, 5/6 Amps complete all specified and as directed

S&F Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all specified and as directed.

S&F replacement of ceiling fan 1200 mm sweep, 230 volts 50 Hz, energy saving model single phase, copper wound motor, pearl white in colour including electronic type fan regulator complete with blade, down rod , canopy and connected with ceiling rose etc complete all as specified and directed. Make:- ES 50 of Havels & equivalent of Baja/Usha

S&F replacement of metal body exhaust fan 300 mm sweep, 900 rpm 230 volts 5h Hz, energy saving model single phase copper wound motor, grey in colour complete with blade, box type louvers etc complete all as specified and directed. Make:- Turbojet SP of Havels and equivalent of Bajaj/Usha.

S&F Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed

M&L for Distribution boards epoxy powder coated TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings complete including disconnecting and taking down existing DB complete all as directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule)

S&F MCCB 125 Amps 4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having including taking out existing unserviceable MCCB complete all as directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (Metal Door) type with blanking plates where required and IP 43 degree protection fixed in repair complete all as directed.

S&F MCB SP 6 to 32Amps, 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps, 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs complete fixed in repair all as directed.

S&F surface and wall mounted LED batten fitting 20 watt 230 volts AC, cool white not less than 1135 mm extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed. Make: Havells cat part No. ENDURALINEARNEOBS20WLED865SPCWH or equivalent in Philips, Wipro.

S&F 25 watt LED cool white, energy saving IP65, environment friendly, long life, LED street light made up of pressure die-cast aluminium housing with high power LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment, integrated electronic driver suitable for pole dia 43 mm (max) including suitable size of bracket bent in shape including 2 Nos clamps, nut, bolts etc and fixing on walls complete including taking down existing light fitting etc complete all as directed. Make: Havells cat part No. ENDURAPEARLSL25WLED757SASYTOPC or equivalent in Philips/Wipro.

S&F Batten holder PVC/polycarbonate type with back plate suitable for batten fitting fixed in repairs complete all as specified and directed.

S&F Sheet metal enclosure, single pole and neutral with three pin and earth plug and socket with and including one single pole MCB 20 Amps, 240 volts,10 KA complete fixed in repair all as directed.

S&F Surface and wall mounted LED batten fitting 10 watt 230 volts AC, cool white not less than 525 mm extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as directed. Make: Philips cat part No. BN 021 LED10S 6500 PSU GR S1 or equivalent in Havells/WiproPhilips & Ecolink

M&L for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

M&L for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLS having multi stranded copper conductor of 2.5 Sqmm nominal cross sectional area drawn in and including PVC conduit concealed and 2.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as continuous earth conductor, connected to earth dolly by providing suitable lugs with inner and outer frame plate matching with surrounding with sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets etc complete for One 5 pin 15 Amps switch socket outlet point controlled by one Modular 16 Amps switch on independent boad:- Note:- (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.(iii) Modular cover plate with frame and sunken steel boxes zinc oxide plated as per site requirements shall be included in quoted rates.

S&F Modular switch single pole one way 16 Amp complete all specified and as directed

S&F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all specified and as directed

M&L Sub main wiring with two run single core PVC insulated unsheathed FRLS cable 1100 Volt grade, 2.5 sqmm size with multi stranded copper conductor drawing into and including 20mm dia rigid PVC conduit in surface/concealed as required including one run single core PVC insulated unsheathed 2.5 Sqmm FRLS cable with multi stranded copper conductor as a earth continuity and connected upto DB etc complete all specified and as directed.NOTE: (i) Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit.(ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface/concealed with using PVC rawl plugs etc complete all specified and as directed.

MCB DB, sheet metal enclosures double door SPN 4 way with 200 Amps rated bus bar 415 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

M/S PUNDIR BUILDERS

M/S S P BUILDERS

Anand Construction & Consultancy

M/s caspur construction company

ACE BUILDERS AND CONTRACTORS

Meher enterprises

JAIN BUILDERS