SPL REPAIR TO INTERNAL ROADS OF CERTAIN UNITS AT MISA CAMP UNDER GE(S) TEZPUR

Amount

M & L for scarifying or picking gravelled macadam or bituminious macadam surfaces in areas not exc 400 sqm, depth exc 50 mm and n.exc 100 mm

M & L for 150 mm thick (complete thickness) WBM in two layers each 75 mm thick (compacted thickness) with coarse agg (granite trap or basalt) of grading 2 (63 to 40mm size) spread, rolled with 8 to 10 ton power roller and consolidated to required gradient and camber required all as specified and directed.

M&L for applying evenly a priming/tack coat RS1 grade cationic emulsion @7.5 Kg/10 Sqm using mechanical sprayer over prepared surface of WBM complete all as specified and directed.

M&L for Premix bituminous macadam with 4% binder content by weight of total mix laid/rolled and compacted to required gradient and camber and gradient complete and rolled with mechanical paver of power exc 8 ton n exc 12 ton ,complete all as specified and as directed.

M&L for applying evenly a priming/tack coat RS1 grade cationic emulsion @ 2.5 Kg/10 Sqm using mechanical sprayer over prepared surface of black top complete all as specified and directed.

M&L for Bituminous premix semi-dense asphaltic concrete (SDAC) 40 mm consolidated thickness with 5.5% binder content of Paving bitumen content by wieght of total mix, rolled and compacted to required camber and gradient complete and rolled with mechanical paver of power exc 8 ton n exc 12 ton

M&L for providing and applying 2.5 mm thick road marking strips (retro reflective) with glass beads of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic material applicator machine filled with profile shoe, glass beads dispensers, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seals, oil, grease and foreign materials etc complete all as specified and as directed.

S & F of delineators post of size 60 cm long, made out of 50 mm MS Pipe of 16 gauge, painted with stove enammelled black paint and 03 nos of retro reflective high intensity grade sheeting in white/red/yellow colours each size 100x75 mm bounded on it and delineators post covered with 30 cm long MS wire case fixed in ground with PCC 1:2:4 type B1 bed of size 150x150x300 mm complete all as specified and directed

S & F Solar studs of size 125 mmx125mmx25mm with shank of 26.80 mm waterpoof, energy saving and eco friendly, made out of solid aluminium alloy shell comprising of solar panel mono crystalline solar 2.4V/0.30 Watt one no., Ni-Mn or Ni-Cd rechargeable battery six nos supper bright LEDS(yellow, blue, green, and white) suitable for working time 50 to 60 hours succesfully after the battery is full charged(Charging time five to six hours/day with solar energy based power supply) with brightness sensitive auto-sensitive auto switch for automatic turn on at night and turn of at day, fixed on existing road surfaces, complete all as specifed and directed.

Supply and fix road stud DA-972(108x100x20mm-76 grms) made of ABS materials with two reflector fitted dynamically and designed to bear load up to 25 tonne with impact strength 253 KN of weight 130 gms(approx) and color as approved by GE complete all as directed.

Manufacturing, supplying and fixing retro reflective/imformatory Cautionary /warning sign boards of any size and shape as directed with support length of 3650 mm and made up of 2 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S S tabular section of standard size along with theft resistantmeasures, mounted and fixed with 2 Nos. S.S. tabular vertical poles and connected items cmplete as per MORTH specifications.back side of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

M/S H. I. ENTERPRISE (BID ID -3151854)

DILIP KUMAR SINGH (BID ID -3146656)