Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74,680Accepted-AOC | L1 | Accepted-AOC l1 |
| Sl No | Description | Qty | Unit | noushadali mannukodavan L1 |
|---|---|---|---|---|
| 1.00Rewinding and overhauling works | ||||
| 1.00 | OD270907/2025-2026:Charges for dismantling the top cover of existing shutter hoisting motor up to 7.5 HP carefully and detaching the coupling pulley sets of main shaft and manually operating shutter hoisting unit, dismantling the electrically working shutter brake after disconnecting the supply line and dismantling the motor | 5 | each | 3,660 ₹18,300 Lowest |
| 1.00 | OD341141/2025-2026:Charges for rewinding the burnt rotor/stator - separate motor in to stator and rotor, dismantling the damaged rotor/stator winding from the rotor/stator slots, cleaning the slots neatly, insulating the slots with correct class of insulating paper, winding the rotor/stator with good quality correct gauge of super enamelled copper winding wires, closing the rotor/stator slots with fibre wedges, putting proper inter layer insulation, connecting the coil end connection, providing new stator/rotor lead wire, steel binding the overhang with proper insulation at both ends, heating the coils and varnishing with good quality insulation varnish, keep it for drying, reassembling and test running. | 6 | kilogram | 1,250 ₹7,500 Lowest |
| 1.00 | OD270950/2025-2026:Dismantling the 5-10 HP motor into stator and rotor, cleaning the windings attending minor
repairs, re taping the coils if necessary, varnishing the coils with best quality insulation varnish,
cleaning and greasing the bearings with good quality grease, heating the windings,
reassembling, test running including scrapping, cleaning and painting with enamel paint. | 5 | each | 1,800 ₹9,000 Lowest |
| 1.00 | OD270904/2025-2026:Charges for refitting the shutter hoisting motor in position after levelling and
correcting alignment to main shaft pulley and shutter hoisting pulley using spirit
level and screw gauge etc including greasing the shafft, bearing and pulley set etc
and conducting trial run at full load. | 5 | each | 5,000 ₹25,000 Lowest |
| 1.00 | OD270912/2025-2026:Conveyance charge of 1-15 Hp motor/pump/panel board/starter board/ etc by Tata ace from pump house to workshop and bring back to pump house.. | 65 | km | 15 ₹975 Lowest |
| 1.01 | OD272397/2025-2026:Supply, conveyance, and fixing MN2 6 - 10A Thermal Over Load relay | 5 | each | 1,300 ₹6,500 Lowest |
| 1.01 | OD273305/2025-2026:Supply and fixing flush head push button | 2 | each | 103 ₹206 Lowest |
| 1.01 | OD273303/2025-2026:supply and replacing bearing no 6208 | 9 | no | 480 ₹4,320 Lowest |
| 1.01 | OD273306/2025-2026:Supply, conveyance and fixing MNX 9-40 Add on Auxiliary contact block (2 NO + 2 NC) | 1 | no | 479 ₹479 Lowest |
Tender Value
₹76,221
EMD Value
₹1,906
Closing Date
25 May 2026, 6:00 pmClosed
Assistant Executive Engineer
Electrical Wing Irrigation Subdivision Chalakkudy
GENERAL Regulator safety Kavanakkallu RCB AM 2025 26 Very Urgent rewinding of shutter motor and overhauling of shutter motors General Electrical Work
2026_Irrig_845083_6
C-ETN-MAR/EL/2025-26
Open Tender
Electrical Works
Item Rate
30 days
Chalakkudy
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
₹1,906
10 Aug 2026
15 May 2026
28 May 2026
15 May 2026
25 May 2026
15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Rewinding and overhauling works | |||||
| 1.001 | OD270907/2025-2026:Charges for dismantling the top cover of existing shutter hoisting motor up to 7.5 HP carefully and detaching the coupling pulley sets of main shaft and manually operating shutter hoisting unit, dismantling the electrically working shutter brake after disconnecting the supply line and dismantling the motor | - | each | - | - |
| 1.002 | OD341141/2025-2026:Charges for rewinding the burnt rotor/stator - separate motor in to stator and rotor, dismantling the damaged rotor/stator winding from the rotor/stator slots, cleaning the slots neatly, insulating the slots with correct class of insulating paper, winding the rotor/stator with good quality correct gauge of super enamelled copper winding wires, closing the rotor/stator slots with fibre wedges, putting proper inter layer insulation, connecting the coil end connection, providing new stator/rotor lead wire, steel binding the overhang with proper insulation at both ends, heating the coils and varnishing with good quality insulation varnish, keep it for drying, reassembling and test running. | - | kilogram | - | - |
| 1.003 | OD270950/2025-2026:Dismantling the 5-10 HP motor into stator and rotor, cleaning the windings attending minor
repairs, re taping the coils if necessary, varnishing the coils with best quality insulation varnish,
cleaning and greasing the bearings with good quality grease, heating the windings,
reassembling, test running including scrapping, cleaning and painting with enamel paint. | - | each | - | - |
| 1.004 | OD270904/2025-2026:Charges for refitting the shutter hoisting motor in position after levelling and
correcting alignment to main shaft pulley and shutter hoisting pulley using spirit
level and screw gauge etc including greasing the shafft, bearing and pulley set etc
and conducting trial run at full load. | - | each | - | - |
| 1.005 | OD270912/2025-2026:Conveyance charge of 1-15 Hp motor/pump/panel board/starter board/ etc by Tata ace from pump house to workshop and bring back to pump house.. | - | km | - | - |
| 1.006 | OD272397/2025-2026:Supply, conveyance, and fixing MN2 6 - 10A Thermal Over Load relay | - | each | - | - |
| 1.007 | OD273305/2025-2026:Supply and fixing flush head push button | - | each | - | - |
| 1.008 | OD273303/2025-2026:supply and replacing bearing no 6208 | - | no | - | - |
| 1.009 | OD273306/2025-2026:Supply, conveyance and fixing MNX 9-40 Add on Auxiliary contact block (2 NO + 2 NC) | - | no | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1438197.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
Tendernotice_2.pdf
PDF • 0.47 MB
BOQ_1438197.xls
BOQ • 0.30 MB
KavanakkalluRCB384NITSBDmerged.pdf
Tender Documents • 1.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .