REROUTING OF HT AND LT CABLES NEAR R2 ROAD AT FACT CD.

REROUTING OF HT AND LT CABLES NEAR R2 ROAD AT FACT CD.

Supply of 3C,185sq.mm XLPE cable: Scope include supply of 11000 V, Aluminium conductor, 3C x 185 sqmm XLPE Insulated, flat Steel/round armoured aluminium Cable conforming to IS 1554/Part I of 1988 or IS 7098 Part I, with latest amendments and with Cable length & ISI marking, to be marked on every 5 Meters on the outer Sheath of the Cable.

Supply of 650/1100 V, Aluminium conductor, 3.5C x 120 sqmm PVC/XLPE Insulated, PVC Sheathed (FRLS), Galvanised Round / Flat Steel Armoured Aluminium Cable confirming to IS 1554/Part I of 1988 or IS 7098 Part I, with latest amendments and with Cable length & ISI marking, to be marked on every 5 Meters on the outer Sheath of the Cable.

Supply of 650/1100 V, Aluminium conductor, 4C x 25 sqmm PVC/XLPE Insulated, PVC Sheathed (FRLS), Galvanised Round / Flat Steel Armoured Aluminium Cable confirming to IS 1554/Part I of 1988 or IS 7098 Part I, with latest amendments and with Cable length & ISI marking, to be marked on every 5 Meters on the outer Sheath of the Cable.

Providing new cable trench and laying of 1No,11/1.1KV, XLPE/PVC insulated power cable in the trench. The scope shall include providing test pit, excavation of existing cable trenches for a depth upto 1 meter and a minimum width of 0.3m, laying of cables ( 1R,3 x 185 sqmm/3.5Cx120sq.mm) and backfilling of trenches after cable laying/jointing . The scope include shoring, strutting, road cutting & dewatering if required, consolidating and disposing of surplus earth, concreting the road cutting, all labour, materials, tools etc. complete as per the directions of Engineer in Charge. The scope also includes supply and spreading /filling of sand in cable trenches, supply and installation of well burnt bricks of 50mm thickness for cable protection inside cable trenches after laying the cables as per the direction of Engineer-in-charge. The bricks shall be laid to enclose the sides of sand bed and cable. Supply and installation of Survey stone as Cable joint markers ( size 15 x 15 x 60cm) above the cable trench. The stone shall be painted with 2 coat floor gaurd exterior paint. The rates quoted shall be for the length of trench and not for the length of cables.

Laying and clamping/winding of 11/1.1kV cables of size up to 3/3.5C X 185sq.mm. The scope of work includes laying of cables through termporarily raised posts/ trees by keeping safety , dressing and winding of the cables at regular intervals. Supply and installation of DANGER BOARD of size 30cm x 20cm as identification tags on HT cables in every 20 mtrs length as directed by the site incharge. All materials required for clamping/wining including nylon ropes shall be supplied by the contractor.

Laying and clamping/winding of 1.1kV cables of size up to 4/3.5C X 25 sq.mm. The scope of work includes laying of cables over earth/ through termporarily raised posts/ trees by keeping safety , dressing and winding of the cables at regular intervals. All materials required for clamping/wining including nylon ropes shall be supplied by the contractor.

Supply of 11KV, 3C 185 sqmm, heat shrinkable type straight through jointing kits for XLPE, armoured, aluminium power cable. (acceptable make: Denson/3M/RAYCHEM )

Carrying out straight joint on 11KV, 3C,185sqmm, XLPE/PILC armoured aluminium power cable using heat shrinkable type straight through jointing kits. The cable joint shall be layed/clamped properly as directed by the Engineer in charge. The scope of work includes all materials and tools required for the joint.

Supply of 1.1KV, 3.5C, 120 sqmm, heat shrinkable type straight through jointing kits for PVC/XLPE, armoured, aluminium power cable. (acceptable make: Denson/3M/RAYCHEM )

Carrying out straight joint on 1.1KV, 3.5Cx120 sqmm, XLPE/PVC armoured aluminium power cable using heat shrinkable type straight through jointing kits. The cable joint shall be layed/clamped properly as directed by the Engineer in charge. The scope of work includes all materials and tools required for the joint.

LAMOS TECHNOLOGY SOLUTIONS PVT LTD (BID ID -3295398)

PEEJESS ELECTRICALS (BID ID -3296636)

VIJAYAN K K (BID ID -3296526)