Cost of Providing Modular Wardrobes, Sanitary fittings, Floor polishing etc...at Ground Floor of Camp office and Quarters of Chief Conservator of Forests at Vanasree Complex, Kollam during 2023-2024

Amount

18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter

od270285/2023_2024 Providing and fixing cup board using high density high moisture resistant multi wood panel of 18mm thick including cost of materials labour charges for fabrication , fixing etc.

50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

50.18.8.3.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2

17.7.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P brass pillar tap

17.32.2 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

17.32.4 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

18.16.2 Providing and fixing brass stop cock of approved quality :20 mm nominal bore

18.50.1 Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

50.18.9.4.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

50.18.9.5.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2

50.18.9.13.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 12 Kgf/ cm2- External work- exposed on wall

50.18.9.15.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall

50.18.9.17.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

50.18.9.20.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 63 mm dia Elbow

50.18.9.20.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 63 mm dia Bend

50.18.9.20.5 Providing and fixing PVC mouldedfittings/accessories for Rigid PVC pipes including jointing with PVCsolvent cement - 63x63x63 mm dia Tee

18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

18.17.4 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming toIS 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling upthegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.13 Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc.complete.

9.79.3 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.65 mm

od270445/2023_2024 Supplying and fixing good quality stainless steel auto closing hinges for Cup board work

od270446/2023_2024 Providing and fixing powder coated telescopic drawer channels 450 mm long with necessary screws etc. complete as per directions of Engineer -in-charge.

9.165.2 Providing and fixing bright /matt finished Stainless Steel handles of approvedquality & make with necessary screws etc all complete.100mm

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

od270643/2023_2024 Providing and fixing C.P. brass heavy type thermostatic mixing valve for shower etc.15mm nominal bore

od270644/2023_2024 Providing and fixing C.P. brass flexible type swaneck tap of approved quality conforming to IS standards 15mm nominal bore

od270645/2023_2024 Providing and fixing Stainless Steel A ISI 304 double bowl kitchen sink as per IS:13983 with fittings, including cutting and making good the walls, slabs wherever required. 950x480 mm bowl depth 250 mm (modified 17.10.1)

od270646/2023_2024 Supplying and fixing Ready made chimney (90cm 3way silent suction chimney 1075 cum /Hrs)

17.81 Providing and fixing floor mounted, white vitreous china single piece, doubletraps syphonic water closet of approved brand/make, shape, size and patternincluding integrated white vitreous china cistern of capacity 10 litres with dualflushing system, including all fittings and fixtures with seat cover, cisternfittings,nuts, bolts and gasket etc including making connection with the existing P/Strap, complete in all respect as per directions of Engineer-in-Charge.

14.28.2 Providing and fixing curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter

17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

od270805/2023_2024 Machine polishing three coats for shabby conditioned mosaic floor or marble floor to smooth and intermediate filling with white cement or grey cement or coloured cement and mansion or ready made wax polishing on the surface etc..

od270818/2023_2024 Staining the multy wood almirah, applying tinker paste and then sand papering, then applying wood filler and then sand papering, spraying NC putty and then sand papering, spraying two coat lacqure paint, and also spraying PU sealer and spraying two coat french polising etc. (OD)

od270853/2023_2024 Purchasing and issuing metal cabinet pot holder of size 24x23x29 cm

od270854/2023_2024 Purchasing and issue 3 layer multipurpose stand

od270855/2023_2024 Installing charges of Air Condition including cost of Copper pipe etc

od270867/2023_2024 Purchasing and fixing heavy duty pan and pot organizer, 5 tier rack(as per voucher)

od270868/2023_2024 Purchasing and fixing pan and pot organizer rack of size 35x 51cm(as per voucher)

od270869/2023_2024 Purchasing and fixing 5 tier pan rack holder

od270870/2023_2024 Purchasing and fixing corner shelf rack stand

od270871/2023_2024 Providing and fixing C.P. brass hand shower rose with 15 or 20 mm inlet : 100 mm diameter

od270875/2023_2024 Cleaning the blockage and not working sewer manhole including disposal of sludge etc

od270876/2023_2024 Engaging labour for various works as per direction of departmental officers in charge...etc complete

od270877/2023_2024 Providing decorative table using with wood including cost of labour,polishing etc and excluding cost of wood

GANESH