SPL REPAIR TO ROAD IN POCKET 5 AND 6 IN ROORKEE CANTT UNDER GE ROORKEE

Amount

M&L for 50mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size)or grading 3 (50 to 20 mm size ), spread, rolled and consolidated to gradient and camber required granite, trap or basalt type complete,all as specified.

M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal, watering and well ramming (including supply ofroad metal ). depth of potholes exc 30 mm paving bitumen completed all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with broomny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a tack coat/ priming coat with bituminous primer @ 5 Kg per 10 Sqm using paving bitumen, over surfaces including preparation of surfaces all as specified and directed.

M&L for premix bituminous Maccadam laid/ rolled and compacted to required gradiant and camber consolidated thickness n exc 75 mm with paving bitumen any penetration with VG -30. complete al as specified and directed.

M&L for Bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thckness with 5.5 % binder VG-30 content by weight of total mix rolled and compacted to required camber and gradient complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

M & L for applying termoplastic reflective paint as in road marking 02 mm thick single coat as in center line or edge line road marking of n. exc 150 mm width using HOT MARK termoplastic paint (HOT application) white by indigenous modem propelled road marking method as directed incl all ingredient such as binder glass beads Titanium -dioxide calcium carbonate linter fillers themoplastic requirement for glass beads shall be per Table no 800-4 specifiation incl spraying of glass beads instruction , approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F 800 mm dia outdoor type, weather proof, unbreakable polycarbonate face roadside convex mirror for vehicle of high visibility orange visor with floor mount type post and brackets, horizontal and vertical angle adjustment complete all as per manufacturer's instructions , fixing to 75mm dia GI pipe 2.10mtr high in post hole of size 60x60x75cm and embedding the same in PCC 1:2:4 type B-1 using 20mm graded stone aggregate including required excavation, complete all as specified and directed by Engineer-in-Charge.

M&L for identification sign/ cautionary mandatory and information sign board, exceeding 1.00 sqm but not exc 1.50 Sqm with 2mm thick aluminum composite panel covered by encapsulated lens type retro reflective sheet (grade 3m type II diamond grade) on both side with green base fixed on and including stainless steel frame of size 25mmx25mm hang on 50mm dia stainless steel pipe of thickness 2mm (fabrication work from SS 304 material) of height up to 2.00 mtr from the natural ground level to top and post embedded in ground with PCC 1:3:6 type C-2 using 40 mm graded stone aggregate of size 45cmx45cmx60cm including necessary excavation and earth work complete all as specified and directed. Note:- (i) Shape/ Design of sign board as approved by GE. (ii) The letters and symbol etc on both side shall be as per site requirement and as approved. The size and font of wording as per direction of GE.

GAYATRI CONSTRUCTION (BID ID -3131880)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3132005)

RADHA ENTERPRISES (BID ID -3131968)

SHRI RAM ENTERPRISES (BID ID -3136625)