Special repair to Bldg No. P-15 of CG Complex under GE Ludhiana

Amount

Sch 'A' Sec-I

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50sqm but not exceeding 4.00sqm each and removing from site all as specified & directed by Engineer-in- charge.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing and minor adjustment complete all as specified & directed by Engineer-in- charge.

Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and removing from site all as specified & directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50sqm each and removing from site all as specified & directed by Engineer-in- charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching and drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified & directed by Engineer-in- charge.

Supply & fixing, sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.

Supply & fixing, frosted glass 5.5mm thick pin headed type glazing with oil putty in squares exc. 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge.

M&L 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors finished even and fair complete all as specified and directed by Engineer-in-Charge.

M & L machine cut Kota stone slab flooring 20-25mm thick over and including 20mm thick screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete complete all as specified and directed by Engineer-in-Charge.

M & L machine cut Kota stone slab 20-25mm thick on vertical surfaces as in skirting/ dado etc. over and including 10mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but n exc 0.18sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) in skirting/dado area of each tile exc. 0.11 sqm but n exc 0.18sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 sqm but n exc 0.11sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L glazed ceramic coloured tiles 450mm x 350mm x 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge.

M&L rendering 5mm thick in ceiling on concrete surface or brick work in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge

M&L preparing newly plastered or pointed surface of wall and applying two coats of oil bound distemper over chalk whitening complete all asspecified & directed by Engineer-in-charge.

M&L undecorated surface of wall including preparation and applying two coats of white wash complete all asspecified & directed by Engineer-in-charge.rge.

M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash complete all as specified & directed by Engineer-in-charge.

M&L preparing newly plastered or pointed surface of wall and applying two coats of cement base paint over a coat of white wash complete all asspecified & directed by Engineer-in-charge.

M&L 40mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floors finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M&L75mm thick PCC (1:3:6) type C-1 using 20mm crushed stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

Supply & fixing glass dividing strips 3mm thick and 38mm wide inserted in position to conform to the design as directed complete all as specified & directed by Engineer-in- charge.

Supply and fixing PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insterted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 8080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

Supply and fixing pressed steel frame size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. duly treated with one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pressed steel frame size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. duly treated with one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete (1:3:6) type C-0 using 12.5mm graded stone aggregate as in bed plates, coping, water trough, filling of chowkhats, roof kerbs or mud stops rounded or chamferred on edges complete all asspecified & directed by Engineer-in-charge.

Supply & fixing, 35mm thick factory made plain framed panelled shutters (any no of panels) of 2nd class hard wood with lock rail and panel inserts of 9mm thick BWP commercial ply. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed.

Supplying factory made glazed and skeleton shutter, 35mm thick of 2nd class hard wood open rebated and prepared to receive glass, gauge etc., without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members as specified in clause 8.24 (a) of MES Schedule (Part-I), and fitted to chowkhats complete all as specified & directed by Engineer-in- charge.

M&L preparing wooden or wood based surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F steel windows/ ventilator with side hung shutters incl box type hinge . with glazing bars and steel peg stay . each window shutter is to be fitted with 1 steel handle 100 mm long casted out of MS Z section and two number of mild steel barrel tower bolts 150mm long on suitable size MS flat complete all as specified and directed by Engineer-in-Charge

S&F steel windows/ ventilator with side hung shutters incl box type hinge . without glazing bars and steel peg stay . each window shutter is to be fitted with 1 steel handle 100 mm long casted out of MS Z section and two number of mild steel barrel tower bolts 150mm long on suitable size MS flat complete all as specified and directed by Engineer-in-Charge

Supply & fixing steel windows / ventilators fixed type with fixing lugs and glazing bars etc. duly treated with one shop coat of red oxide primer complete all as specified & directed by Engineer-in- charge.

M&L mild steel work conforming to Fe-410 or Fe-310 quality-A as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks, door chowkats and similar works complete all as specified & directed by Engineer-in- charge.

M&L preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminium anodised barrel tower bolt of extruded section 150mm long all as specified & directed by Engineer-in- charge.

Supply and fixing 250mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed by Engineer-in-charge.

Supply & fixing 100mm long mild steel cold rolled medium weight butt hinges all as specified & directed by Engineer-in- charge.

S&F aluminium handles anodised cast type 125mm long all as specified & directed by Engineer-in-charge.

Supply & fixing, galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanused wire staples all as specified &directed by Engineer-in- charge.

All as per serial item No.45 here in before but for steel windows including taking out old/rusted wire cloth from steel windows either by cutting or taking out galvanised wire staple provisioning / securing the wire cloth to steel windows as per existing specifications all as specified & directed by Engineer-in- charge

Supply & fixing helical door spring mild steel 300mm ordinary rat tail rod pattern mild steel frame including roller and roller plate and welding to frame as required complete complete all as specified and directed by Engineer-in-Charge.

Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

All as per item No.50 above but except bricks. (Old serviceable bricks retrieved from demolition of brick work shall be re-used after cleaning).

Taking down eaves gutters and rainwaer pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-neck etc including cleaning or refixing or removal to store (measured) overall as fixed along the centre line over fittings and accessories complete all as specified & directed by Engineer-in- charge.

Supply & fixing, 110mm bore PVC (SWR) soil waste and vent pipe single socketed in any length with rubber ring joints, jointed with solvent laid in trenches complete all as specified & directed by Engineer-in- charge.

Supply & fixing PVC (SWR) bend 110mm bore of any redius complete all as specified & directed by Engineer-in- charge.

M&L 18/ 19mm thick block board, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work complete all as specified & directed by Engineer-in- charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Demolition of mud in roofs, any thickness including plaster and leeping plaster (whether full thickness removed or only part thereof) all as specified and directed by Engineer-in-Charge.

Dismantlig brick tiles in roof laid dry and pointed in cement mortar all as specified and directed by Engineer-in-Charge.

M&L for wire brushing neat cement slurry with 3 kg of cement per sqm at top and bottom of base coat and cleaning top surface all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the existing slab in slope of 1:40 all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick rendering on terrace , sides of parapet in cement mortar (1:4) with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge (Note: water proofing compound will be measured and paid separately under other item)

Supply only integral water proofing compound .

Priming surfaces and applying normal treatment (for moderate condition) using glass fibre base bitumen felt , grade 2 all as specified and directed by Engineer-in-Charge.

M&L providing APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/Sqm) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm by forced application all as specified and directed by Engineer-in-Charge.

M&L 40mm thick brick tiles laid on 15mm thick cement mortar 1:6 & joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed by Engineer-in-Charge.

All as per item No. 65 above but except tiles after cleaning and removing old mortar from bricks .

M&L PCC (1:5:10) type E-2 using 40mm graded brick aggregate as filling under (sunken slab) complete all as specified & directed by Engineer-in-charge .

Supply & fixing ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore all as specified & directed by Engineer-in-charge.

S&F 20mm Gun metal ,globe or gate valves with iron wheel head , screwed both ends for iron pipe and fixed complete all as specified & directed by Engineer-in-charge .

Taking down steel water tubes of size 15mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge.

Taking down steel water tubes of size 20mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge.

Supply & fixing steel water tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls pe complete, all as specified & directed by Engineer-in-charge.

Supply & fixing steel water tubes of size 20mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls pe complete, all as specified & directed by Engineer-in-charge.

S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repairs pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed.

Supply & fixing in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on brackets including 32mm dia CP waste coupling complete all as specified and directed by Engineer-in-Charge. (make: Cera cat part No. S2040115 and S2090111 or Equivalent Neycer / Jaguar, / Perryware

Supply & fixing in repairs vitreous china squatting pan 'Orissa' pattern of size 580mmx440mm white with integral foot rests including lime concrete for fixing the trap and making connection to trap and flush pipe and making good the floor to existing specifications complete all as specified and directed by Engineer-in-Charge.

M&L 75mm dia cast iron floor trap with grating including jointing to waste pipe with run lead joint and embedded in cement concrete (1:2:4) type B-1 using graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair Bib tap chromium plated ,cast copper alloy,fancy type , screwed down high pressure with crutch or butterfly handle, screwed both ends for unions suitable for size 15mm bore complete all as specified & directed by Engineer-in-charge.

Supply & fixing in repair stop valve chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge.

Dismantling PVC water storage tank of capacity exc 250 litre but n. exc 500 litre and removing from site all as specified & directed by Engineer-in- charge.

Supply & fixing rotational moulded polyethylene water storage tank of capacity 500 litres (cylindrical vertical double layered with closed top) hoisted and fixed in position as per specified SSR part-I complete, all as specified & directed by Engineer-in-charge.

Taking down curtain rod along with wooden pallmate laid on wall complete all as specified and directed by Engineer-in-Charge.

Supply & fixing curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm,PVC coated and colour / Pattern over all dia 28 to 29mm complete all as specified and directed by Engineer-in-Charge.

Supply & fixing plastic finial of 28 to 29mm bore decorated type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed by Engineer-in-Charge.Make: Aerolux/MEC or VISTA

Supply & fixing mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge.

M&L undecorated surface of wall including preparation and applying one coat of white wash complete all asspecified & directed by Engineer-in-charge.

M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash complete all as specified & directed by Engineer-in-charge.

M&L preparing newly plastered or pointed surface of wall and applying two coats of oil bound distemper over chalk whitening complete all asspecified & directed by Engineer-in-charge.

M&L undecorated surface of wall including preparation and applying one coat of cement base paint complete all asspecified & directed by Engineer-in-charge.

Supply and fixing in repair chromium plated shower rose 125mm size with or without swivel joints including fixing to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 495mmx420mm with bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair brass chromium plated tubular towel rail , 20mm dia D-type, 60cm long between flanges all as specified & directed by Engineer-in- charge.

M&L Endura ceramic concrete tiles 30cm x 30cm x 10mm thick in floors set, jointed & pointed in neat cement slurry using grey cement and pigment laid over and including 20mm thick screed bed in cement mortar (1:6) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete as in any description and in any position complete all as specified and directed by Engineer-in-Charge.

M&L pre-cast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole cover and set in cement mortar (1:4) including necessary formwork complete all as specified and directed by Engineer-in-Charge.

M&L TMT bars 6mm-8mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.

Sch 'A' Sec-II

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling rose, pendent holder, sketch fitting, sockets, regulator etc and making good disturbed surfaces of walls and floors etc to match with the existing complete all as specified and directed by Engineer-in-Charge.

Taking down ceiling fan, any sweep and size, sealing cable, dismantling fan blades, re-assembling the ceiling fan and re-fixing in original position and making connections using new PVC insulated copper conductor cable of size 23/.0076 sqmm from ceiling rose to connector/ fan including supply and replacement of split pins complete all as specified and directed by Engineer-in-Charge.

M&L, Painting to ceiling fan of any make/ model/ sweep by removing old paint and filling cavaties with filler and applying one coat of super enamelled paint of colour as per existing using spray gun and writing MES numbers with black paint complete all as specified and directed by Engineer-in-Charge.

M&L point wiring complete with 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable in and including concealed heavy duty PVC conduit including cutting chases in walls and making good the disturbed surface with all jointing accessories including provision of 3mm thick bakelite sheet top cover on new sunken boxes fixed with new screws & washers including 1.5 Sqmm FRLS, PVC insulated unsheathed stranded copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point/ bell point controlled by one switch or one fan point controlled by one switch through regulator complete all as specified and directed by Engineer-in-Charge.

All as per item No.101 above but for one 5 pin 5/6 Amps socket outlet on independent board.

All as described in Srl item No.101 above but for one 5 pin 5/6 Amps socket outlet on same board with other switch.

All as described in Srl item No.101 above but for one light point controlled by one switch two way.

All as per item No. 101 here-in-before but with FRLS cable of cross sectional area 2.5 Sqmm for one socket outlet 15/16 Amps independent including 2.5 Sqmm FRLS, PVC insulated unsheathed solid conductor wire as earth continuity to common earth all as specified & directed.

S&F in replacement 18/20 Watt LED decorative ultra slim linear LED light fittings fixture with co extruded polycarbonate body, environmental enegy efficient including connection from celing rose to connector complete with all acessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.Make Crompton cat part No LDL-20-NW or equivalent Bajaj / Philliips / Havells

S&F in replacement 10 Watt 600 mm T5 TL LED decorative ultra slim linear LED light fittings fixture with co extruded polycarbonate body, environmental enegy efficient including connection from celing rose to connector complete with all acessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.Make Crompton cat part No LDL-10-NW or equivalent Bajaj / Philliips / Havells

M&L submain wiring with three single core FRLS PVC insulated unsheathed multistranded copper conductor cables of size 4 Sqmm FRLS PVC insulated copper conductor one run green insulation copper conductor cable as earth continuity drawn in and including medium grade PVC rigid non metelic conduit not less than 25mm dia with necessary conduit fittings concaeled in wall including cutting chases and making good the disturbed surface to match the existing surface including taking down existing submain wiring complete all as specified and directed by Engineer-in- charge.

S&F in replacement factory made sheet metal enclosure for distribution boards, SPN, 8 way; double door with 200 Amps rated copper bus bar suitable for housing MCBs and isolator and working on 240 volts AC supply including making good to match with existing surfaces complete all as specified & directed by Engineer-in- charge.Make: Hagger/L&T/Legrand / Indo Asian

Supply & fixing in replacement MCB SPN 240 volt, 6-32 Amp, 50 HZ, 10 KA rupturing capacity 'C' series all as specified & directed by Engineer-in- charge. Make: Standard /Havells/ Indo Asian / BCH / C&S

Supply & fixing in replacement MCB single pole 240 volt, 6 to 32 Amp, 50 HZ, 10 KA rupturing capacity 'C' series all as specified & directed by Engineer-in- charge. Make: Standard /Havells/ Indo Asian / BCH / C&S

Supply and fixing ceiling rose surface bakelite 65x 50mm with two or three terminal, polycarbonate /pvc/ isolated body all as specified and directed by engineer in charge.

Supply and fixing switch piano flush type single pole one way 5 Amps, 230 volts all as specified and directed by engineer in charge.Make: Anchor / SSK / Havells

Supply and fixing switch piano flush type single pole two way 5 Amps, 230 volts all as specified and directed by engineer in charge.Make: Anchor / SSK / Havells

Supply and fixing socket outlet 3 pin,5 Amp multipurpose flush type all as specified and directed by engineer in charge.Make: Anchor / SSK / Havells

Supply and fixing socket outlet two in one 5Amp -15 Amp flush type all as specified and directed by engineer in charge.Make: Anchor / SSK / Havells

Supply and fixing switch piano flush type white / ivory finish single pole one way 15 / 16 Amps, 230 volts all as specified and directed by engineer in charge.Make: Anchor / SSK / Havells

Supply & fixing, speed regulator for ceiling fan 1200mm/ 1400mm flush stapped type 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing electronic bell 230 volts single pole Ding Dong type complete all as specified and directed by Engineer-in-Charge.

Supply & fixing bell push 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5 Watt LED lighting fixture with trimline is a robust high performance batten and LED luminaire comprises of extruded channel in thermally conductive material and high translucent serrated milky white diffuser is used to get glare free and smooth light distribution and connection from ceilling rose to connector complete with all accessories complete all as specified and directed by Engr in Charge. Make Crompton cat ref No. LDL-5-NW or euivalent in Havells/Philips.

Supply and fix LED bulk head fitting 10 watt with pressure die cast aluminium housing for multiple application IP 65 Protected complete all as specified and directed by Engr in Charge. Make Crompton cat ref No. LBHE-10-CDL or euivalent in Havells/Philips.

Supply and fix LED security light fitting 25 watt made up of pressure die cast housing with toughened glass and high power LEDs with option secondary optic with IP 66 protection including SPD for building secruity purpose with bracket bend to shape / size as require and fixing with two nos MS clamps for suitable size complete all as specified and directed by Engr in Charge. Make Crompton cat part No. LSTS-25-CDL-M or euivalent in Havells/Philips.

GURPARTAP SINGH GULATI

M/s S B Construction Company

PARDEEP CONSTRUCTION COMPANY