Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹87.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.0 Cr+₹12.5 L (14.2%)Rejected-Finance 35 1 B M 1ST BYE LANE CHAPDANI HOOGHLY 712222 | CHAPDANI | HOOGHLY | WEST BENGAL | 712222 | L2 | Rejected-Finance L2 | |
| 3 | L3₹1.0 Cr+₹15.2 L (17.3%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹1.1 Cr+₹21.7 L (24.8%)Rejected-Finance KUMARDANGHI P O RAIGANJ DIST UTTAR DINAJPUR | RAIGANJ | UTTAR DINAJPUR | WEST BENGAL | L4 | Rejected-Finance L4 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
10 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
N K Das SE EL
Uttarkanya, Fulbari, Jalpaiguri
Supply and Installation of High Mast light in different places of Alinagar GP and silampur Badh under Kaliyachak - 1 block
2022_NBDD_391762_1
NBDD/BS/SE /NIQ-13 - (EL) of 2022-2023
Open Tender
ELECTRICAL WORKS ORG
Item Rate
60 days
Malda
Please refer Tender documents.
6 documents required · 6 mandatory
₹40,000
Yes
9 Jan 2023
26 Jul 2022
12 Aug 2022
26 Jul 2022
10 Aug 2022
26 Jul 2022
Amount
Supply for fitting of 30W HAVELLS ENVIRO ALL-IN-ONE SOLAR STREET LIGHT, Havells Enviro ALL-IN-ONE Solar Street Light is MADE IN INDIA with High Efficiency Mono Crystalline ,Solar PV Module, Lithium Ferro Phosphate battery with Inbuilt BMS technology, High Efficacy LED, MPPT ,Solar Charge Controller & Aluminium Extruded body. ALL-IN-ONE SSL is specially designed by Progressive Intelligent Dimming which automatically control the dimming and brightness of light, which increase the backup time, Item Code - SSSSLX0141 Luminaire Wattage 30 W , Solar PV Module 12V 50 W - Mono- crystalline Battery (LiFeP04) with BMS 12.8 V 24 Ah Back up 24 Hours with Dimming , Solar Charge Controller MPPT, Solar Charge Controller Capacity 12V, 5 A , Efficiency > 93 % , LED Make OSRAM LED viewing angle 120º , Color Temperature 5700 K , Luminous Efficacy > 100 lumen / watt, Life Span >50000 hours,Driver In Built DC- DC type ,Body Aluminum Extruded Body ,Dust and Water protection IP 66 Standards, Low-Voltage, indication Red LED Charging indication Green LED Other protections a. Over-Charge protection b. deep-discharge protection c. Over current protection d. Short circuit protection e. Over voltage protection Dusk to dawn operation Provided Humidity range 0 to 95 % (non-condensing) Temperature range -10 to +55 °C , Dimensions 1026*382*55 mm , Gross Weight 16.5 Kg
Supply of 6mtr high octagonal galvanised steel having made out of 3 mm thick steel sheet (grade of steel s355) top dia 70 mm & bottom dia 130 mm single sharp welding with base plate dimension 200x200x12 mm (BOP 7030 ) with foundation bolt 4x20mm dia , PCD 200mm bolt length 600mm and 1 m standerd bracket suitable for 70 mm top diameter Make - utkarsh, baja, bansal
Erection of 6 mt pole of suitable size & height of suitable size & height cc(1:2:4) foundation of 1500mmx600 mm x600 mm size including fixing of existing 4 nos foundation bolt & nts with washer and cement plaster & neat cement polish as per direction of EIC.
Painting Block Letters or Digits within a circle/square as required, with ”Black Japan”paint of approved make & brand, the size of letters 50 mm and upto 75 mm as per EIC.
Earthing with 50 mm dia GI pipe 3.64mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80mm long GI bolts, double nuts,double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Supply Fiyting, Fixing Project display Board at different locations of project area made with MS sheet and angle including writing letter in both bengali & English encrypt of project Name, Project Cost ,Necessary Picture , Animation etc. including suitable section of MS channel as per design propely fixing with in ground of 1 M below ground level and upto 4 mtr above ground level with concrete including all painting and complete in all respect as per direction of Engineer in charge Without electrical illumination work (6'x4')
Supply Installation Testing Commissioning of Solar High Mast including Suitable Foundation as per Drawing , Item Specified as with 2 Day Autonomy, having 6 Luminaries of 52W each with Colour Temperature of 3000K.10 Meter GI High mast, designed to sustain a wind speed of 180KM/hr, with 6Pcs of 52W Led fixture enclosed in Pressure die cast Aluminum Housing powder coated in silver grey and with Toughened glass, The 312W of Light will be backed up and powered by More than 3200 Wh of Lithium Ferrous Phosphate Based Battery Backup and the system will be charged by 900Wp of Solar PolyCrystalline PV Modules.10 Meter Polygonal Pole, GI with necessary mounting arrangement for Solar PV Module & Light Fittings Mounting arrangement should be such that it is easy to maintain 6 Units of 52W LED Light with secondary Lens, in Aluminum Die Casting, IP66 Protection, Auto Switching Dask to Dawn, Led Driver cum charge controller should be equipped with the following features, MPPT based charge controller with Three stage battery charge monitoring algorithm,Greater than 90 percent efficiency,Short Circuit Protection, Battery Over- charge Protection, Battery Deep Discharge Protection, PV Reverse Voltage Polarity Protection, Battery Reverse Voltage Polarity Protection,Software Watch-dog for LED Over-current Protection, (Zero Dark Spot at ground level)6 Units of 42Ah LiFePO4 Battery BIS approved, with easily replaceable mounting and wiring arrangement 6 Units of 150Wp Solar PV Modules Polycrystalline with RFID Tag All wirings with the modules should be made using 4Sqmm Solar cables, the connection with the Modules to be made using MC4 Connectors. System must have an inbuilt Remote Monitoring System, integrated with MPPT charge controller and it would record the parameters at a fixed interval of 10 Minutes, Recorded data should be available in the PDF, XLS, JPED, PNG & SVG Format with the Data logging of the following parameters 1. Battery: oltage/Current/Power 2. Solar PV Module: Voltage/Current/Power 3. Load: ON-Off Status/Voltage/Current/Power 4. Fault description 5. Site Co-ordinates Make SOLARIZE (SOLHM52WX6WL)
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire(4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection(1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per ratingon Angle iron frame.160A-L&T
Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc - 160A-L&T
Bus-Bar Chambers : Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)-415 V, 200 A,Dimension of Cu. bars 4 x 20x5mm,Dimension of Sheet Metal Box- 500x150mm
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection,concealed in wall after cutting the wal & mending good the damages to original finish incl.Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment-8 way-Enclosure (607717)-
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection-100 A-FP-Legrand
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection-6-32 A-SP-Legrand
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finsh incl. Inter conection with suitable size of copper wire and neutral link & provision for earthing attachment.2+8 way-Legrand-Enclosure (607711)
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection -DP-6-32 A-Legrand
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface. i)On Board
ii)Average run 3 mtr
iii)Average run 5 mtr
iv)Average run 8 mtr
ivAverage run 10 mtr
vi)Average run 12 mtr
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. i)2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
ii)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)(Power Plug)
iii)2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)(AC)
iv)2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC(TPN-SPN)
v)4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC(TPN)
Supply & Fixing 240V,25A Modular type socket, 25 A, Modular type starter(Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 25A Modular switch type SP MCB (C-Curve) (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. conections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing 240V, 4nos. 16A, 3pin Modular type plug socket with 4 nos16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages-No. 8 SWG
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Excavation of soil for installation of Earth Electrode and filling & ramming.For Soft Soil
Earthing with 50mm dia GI pipe 3.64 mm thick x 3.04Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax80 mm long GI bolts, double nuts, double washers incl. S & F 15mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe.
Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)For 45 cm (18") Exhaust fan
S & F 250 V 1200 mm sweep 370 RPM AC ceiling fan (ISI) brown colour (high speed) complete with blades, canopy, down rod etc. having fixed with 2 nos ball bearing fixing the same, painting of down rod, connection by supplying 3×1.5 sq. mm stranded copper wire. (USHA/Orient/havells).
Supply and Fixing of 240 Volt Industrial box type LED T8 tube light batten which is CRCA body with pre- coated in white & pre-wired for LED tube to be fixed on ceiling/wall for 1 X 18 W LED T8 luminaire with gives soft glare free light with necessary connection and earthing attachment and Supply and fixing only single fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.(MAKE- PHILIPS CAT no . TMC501 p 1xT LED 22W P3241+STELLAR BRIGHT TLED20W/philips)
S & F surface mounted PDC AL housing 12 watt LED Down light gives soft glare free light output to be fixed on ceiling at in corridor/lobby etc. with all arrangement and necessary connection.(CG Cat no. LCSR-12-CDL]/phillips/)
Audio(Sound System): SITC of FOH Speakers with following specification: 1000 Watt 2-way Bass-reflex type passive speaker with 15" cone (LF), Voice Coil: 2.5", Magnet: Ferrite & 1.4" (HF), Type: 1" throat compression driver, Magnet: Ferrite; Frequency range (-10dB):49 Hz - 20 kHz; Coverage area: H90゚ x V60゚; Crossover: 2.0 kHz; Sensitivity: 95 dB SPL & Peak: 125 dB SPL; Cabinet material: Plywood.
SITC of Subwoofer with following specification:1600 Watt 2-way Bass-reflex type passive subwoofer with 15" cone (LF), Voice Coil: 4", Magnet: Ferrite; Frequency range (-10dB): 33 Hz - 3.5 kHz; Sensitivity: 98 dB SPL & Peak: 130 dB SPL; Cabinet material: Plywood with Durable Polyurea coating.
SITC of Power Amplifier for FOH Speaker & Subwoofer with following specification: 2x 1000W at 8Ω ; 2x 1200W at 4Ω ; Newly developed Class-D amplifier engine with a custom LSI ; Flexible onboard PEQ, crossover, filters,delay and limiter functions; Utlities for safe and secure operation; Sampling frequency rate Internal 48kHz ; A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling ; Total harmonic distortion 0.1% (1kHz, 10W),
SITC of Delay & Balcony Speakers with following specification: 700 Watt 2-way Bass-reflex type passive speaker with 10" cone (LF), Voice Coil: 2", Magnet: Ferrite & 1.4" (HF), Type: 1" throat compression driver, Magnet: Ferrite; Frequency range (-10dB): 55 Hz - 20 kHz; Coverage area: H90゚ x V60゚; Crossover: 2.5 kHz; Sensitivity: 93 dB SPL & Peak: 122 dB SPL; Cabinet material: Plywood.
SITC of Power Amplifier for Delay & Balcony Speakers with following specification: 2x 1000W at 8Ω ; 2x 1200W at 4Ω ; Newly developed Class-D amplifier engine with a custom LSI ; Flexible onboard PEQ, crossover, filters, delay and limiter functions; Utlities for safe and secure operation; Sampling frequency rate Internal 48kHz ; A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling ; Total harmonic distortion 0.1% (1kHz, 10W),
SITC of Active Stage Monitor Speaker with following specification: 1000 Watt 2-way, Bi-amped Powered Speaker, Bass-reflex type speaker with 12" (LF) cone, Voice Coil: 2.5", Magnet: Ferrite & 1.75" (HF), Type: 1" throat coaxial compression driver, Magnet: Ferrite; Frequency range (-10dB): 55 Hz - 20 kHz; Coverage area: H90゚ x V90゚; Crossover: 1.8 kHz: FIR-X tuning™(linear phase FIR filter);Maximum Output Level: 129dB SPL; Cabinet material: Plywood with Durable Polyurea Painting.
SITC of Wall mount Speaker for Lobby with following specification: Frequency range (-10dB) : 80Hz - 20kHz , Nominal coverage : H( 90) X V (90 ) , Components : 6.5"(160mm) cone driver , 1"(25mm) balanced dome tweeter , Power rating : PGM 50W , Nominal impedance : 8Ω / 15W, 7.5W, 3.8W , SPL : 110dB SPL (100W)
SITC of Power Amplifier for Lobby Speakers with following specification: Output power : 1kHz (THD+N=1%: 3Ω/4Ω) : 30W x 2 (20ms Burst) , High impedance: 100V line : 60W x 1 ,Total harmonic distortion :≤ 0.1% (Line in to Speaker out 1kHz, 15W, 3Ω/4Ω), ≤ 0.2% (Line in to Speaker out 1kHz, 30W, 70V/100V) , Frequency response : 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V)
SITC of Analog Mixer with Following Specification: Mixing channels 24 Line Inputs (16 mono and 4 stereo) ; GROUP 4 GROUP Buses + ST Bus ; AUX 6 AUX Sends + 2 FX Sends ; MATRIX 1 Matrix out ; On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)
SITC of Gooseneck Mic with Base: Pre-polarized condenser gooseneck microphone with an overall length of minimum 450 mm and with XLR3M-type connector at its base, which shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better,frequency response of 50 Hz to 20,000Hz or better and sound input levels handling capability of minimum 130 dBspl, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA;
SITC of Wired Handheld Vocal Mic: Handheld wired microphone, as per specification.Low feedback and high SPL (>150dB) make it ideal for any stage application. Also, consistent on/off axis and proximity response and frequency response of 40Hz - 16kHz. Includes carry pouch and mic clip.
SITC of Equipment rack: 27 RU equipment rack with louvered steel chassis, lockable glass door,hardware, PDU, Fan, Trays, cable manager with all necessary accessories.
Stage Lighting System: Lighting Bar over the stage & FOH area consists of : - 2 No. Fixed stage light bar on stage & 1 No. front of house light bars along with supsenders to hang the stage lights.
Power control system consisting of : - 1. General Lighting Distribution Board not less than 16A for all the lighting points with necessary Indicators and safety controls. 2. Power Junction boxes, Auxilary marshalling box etc. 3. DMX dimming junction boxes for the dimming network. 4. Internal earthing system & installation Hardwares required for successful installation.
Digital Dimming system consists of Controller for the LED lights Lights : - 1. Programmable digital lighting console for stage lights. 2. DMX Splitter for the Light dimming network. 3. DMX Cables and XLR connectors.
Wiring of Auditorium luminaries and motorised sections using 3core 1.5sq.mm FRLS flexible cables run inside the MS perforated cable trays with termination at the Power distribution centre panel for all points.
LED Stage Lighting Fixtures : - 54X3W LED PAR Light, RGBW, 25°, manual/DMXcontrol, diecasted Aluminum housing with black powder coated with matt finish complete with 3Mtr cable but without any accessories. Model : CAN LED PAR 543
54X3W LED PAR Light, 3200K, 25°, manual/DMXcontrol, diecasted Aluminum housing with black powder coated with matt finish complete with 3Mtr cable but without any accessories. Model : CAN LED PAR 543T
100W LED PARCAN Light, 3200K, 11°-30°, manual/DMXcontrol, Spun Aluminum housing with black powder coated with matt finish complete with 3Mtr cable but without any accessories. Model : CAN LED PARCAN
4X100W LED Blinder Light, 3200K, 30°, manual/DMXcontrol, Aluminum/MS housing with black powder coated with matt finish complete with 3Mtr cable but without any accessories. Model : CAN LED BLDR 400
200W LED Profile Light, 3200K, 19°, manual/DMXcontrol, Plastic/Aluminium housing with black finish complete with 3Mtr cable but without any accessories. Model : CAN LED PRO 219
200w fresnel of 3200K . Can LED 200WT1
Accessories for all the lighting fixtures like 1. Diecast Aluminium C Clamp for all Lights 2. Safety bond for all Lights 3. Identification Name Plates for all lights Model : CUSTOM
Supply, Installation, Testing, Commissioning of Stage lighting system including Programming of lighting console.
LAXMI ENTERPRISE
S S DAS
M/s Pinki Construction
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .