Annual Plan-24-25 Koduvally BP Renovation and completion works of AE/ADA Conference Hall Pr. No.226-25-In Koduvally General Civil Work

Amount

Completion works of conference hall

OD499772/2024-2025:Providing and fixing thermal insulation with SYNTHETC wool conforming to Polythene Bags fixed to wall wirh screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.

OD499773/2024-2025:Veneered MDF slat wall panelling (lower wall) Providing and fixing 18mm veneered MDF slats (exterior grade) of width between 4 to 5 inch . Same is fixed on 50 X 50 mm wood strip (sal wood )horizontally spaced and fixed at every 600 mm including cost of all labour charges , materials , conveyance charges ,cost of hardwares etc.complete.

OD499774/2024-2025:POP pannellig of size 12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered as per direction dept officer at site

OD499775/2024-2025:Fabricating and fixing stainless steel door handle including bending to required shape, fixing on the glass panel etc complete.

OD499776/2024-2025:Supplying and fixing Sila Phalakam with granite stone of size 900x600mm or nearest on prepared wall with engraving English or Malayalam letters of specified size on Hard stone including cost conveyance and labour charges

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

21.18:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

13.68.1:French spirit polishing:Two or more coats on new works including a coat of wood filler

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD503209/2024-2025:Multi Wood Panel Letters. Providing and fixing letters 15 to 30 cm height using multi wood panel 17mm average thickness, design as per the departmental approved drawing, including all cost of materials, jigsaw cutting charges, all labour charges, conveyance and machineries etc.

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

OD503230/2024-2025:supplying and fixing pvc door frame 53x65 mm or nearest available size with vertical frae joints fitted for pvc head providing concealed reinforced motor cut and welded corners on computer aided machine,tie rod at the bottom to keep the frame iron hollow connecting elasto metric gas cutting grooves etc complete

OD503244/2024-2025:Providing and laying 60mm thick factory made cement concrete interlocking paver block of M30 grade mad by block making machine machine with strong vibrating carpet of approved size desingn & shape laid in required color and pattern over and including 50mm thick compacted bed of 6mm metal filling the joints with fine sand etc.all complete as per the direction of overseer in charge.

vipin M (BID ID -2157482)

Bidder Name

VINEESH E

vipin M