ADDN/ ALTN/ RENOVATION TO CERTAIN BUILDINGS OF OFFRS MESS AND OFFRS GUEST HOUSE AT VSN UNDER GE (AF) CHILODA

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc) complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed.

Demolition of cement concrete in roof, floor (other than ground floor) beam, staircase, landing chajjas and similar suspended works, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregates) as in flooring in leveling course, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L for dark shade colour vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square/ rectangular) polished area of each tile exc 0.11 Sqm but n. exc 0.18 sqm as in skirting/ dado etc laid over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed by Engineer-in-Charge.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F CP towel rack with hooks 600mm long complete all as specified and as directed.

S&F in repair Health Fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish and wall hook complete all as specified and as directed.

S&F 12 mm thick toughened glass/ figured glass shutters (openable type), with clear glass including diamond polishing and all hardware fittings detailed as under, fixed in position as per manufacturer instruction complete all as specified and as directed.

Stainless steel top patch.

Stainless steel top pivote.

Stainless steel bottom patch.

Glass to wall Stainless Steel lock.

Stainless steel floor door spring.

Stainless steel handle 300mm size.

S&F MS flat iron such as small articles for hold fast and similar work complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) as in blocks for fixing hold fasts and fillling of chowkhats or any other purpose complete all as specified and as directed.

S&F II nd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F in repairs 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F in repair aluminium ventilator, louvers type, frame top & bottom of size 31 x 42 x1.60mm (section No 20558) rectangular tube of size 40x20x2mm (Section 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19 x 17.30 x 0.90mm (section No 19360) thick including stainless steel wire cloth 0.36 mm nominal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and as directed. Note:- Section No. given above are of make Jindal, Contractor may use similar section of Make Hindalco/ Nalco etc.

S&F 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 200mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frame exc. 1.5 Sqm and n. exc. 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutter only of any description exc 1.0 Sqm n. exc. 2.0 Sqm and removing complete all as specified and as directed.

Supply only liquid waterproofing compound.

M&L for two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of walls including brooming down and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing treatment of old surface including brooming down/ steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spoutes and cleaning with water on wall complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of walls including pilasters/ cornices etc and applying two coats of acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction including providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for preparation of old steel surface of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces including preparation of old painted surfaces over 10 cm width or girth complete all as specified and as directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for applying two coats of distemper oil emulsion over one coat primer after and including application of cement base wall care putty on wall surface complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed.

S&F 15mm bore dia GI tubing medium grade including all fitting fixed to walls and ceiling or laid in floor complete all as specified and as directed.

Taking up or down 20 mm bore of dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 20mm bore dia GI tubing medium grade including all fitting fixed to walls and ceiling or laid in floor complete all as specified and as directed.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone/ brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and as directed.

S&F in repairs two piece wall hung EWC with cistern size 65.5 x 36.5 x 75.5cm including custom made seat cover and twin flush fitting complete all as specified and as direted.

S&F in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, fixed in position and connecting complete all as specified and as directed.

Dismantling of 75mm/ 100mm dia cast iron drain pipes, jointed in cement mortar fixed on wall and removing where directed by Engineer-in-Charge.

S&F 75mm dia cast iron, spun pipe, for soil, waste and vent in any length, laid in trenches or in floors, with cement joints, complete all as specified and as directed.

S&F 100mm dia cast iron, spun pipe, for soil, waste and vent in any length, laid in trenches or in floors, with cement joints, complete all as specified and as directed.

S&F 100mm dia cast iron, spun pipe, for soil, waste and vent in any length, fixed to walls, with cement joints, complete all as specified and as directed.

S&F 75 mm dia cast iron spun pipe, for soil, waste and vent in any length, fixed to walls, with cement joints, complete all as specified and as directed.

S&F 100mm dia bore cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete all as specified and as directed.

S&F 75mm dia bore cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete all as specified and as directed.

Taking down PVC (SWR) pipe of any dia complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed.

S&F PVC (SWR) plain bend 110mm dia, of any radius with rubber ring joints, complete all as specified and as directed.

S&F PVC (SWR) plain bend 75mm dia, of any radius with rubber ring joints, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F in repair cast iron floor trap 100mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregates) complete all as specified and as directed.

S&F in repairs SS Grating of size 150mm x 150mm fixed with white or grey cement complete all as specified and as directed.

M&L in repair floor door stopper of aluminium alloy body and tongue, anodised, with rubber cover fixed in door complete all as specified and as directed.

S&F 18/ 19mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete all as specified and as directed.

S&F 12mm thick plywood (07 Nos of ply) grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete all as specified and as directed.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F 75mm size stainless steel butt hinges medium weight, fixed to chowkhats complete all as specified and as directed by Engineer-In-Charge.

S&F 100mm size stainless steel handle complete all as specified and as directed.

S&F in repair 28 mm dia stainless steel rod drapery rod cut to size and fixed in position, including all fitting complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation,false ceiling etc) or insulation board/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F 5.0mm thick printed PVC Sheet in strip & channel feathered at the edges for fixing on solid PVC wall linning, insulated PVC Wall linng and solid PVC Partition inclusive of solvent cement and fixing at site complete all as specified and as directed.

S&F PVC beading at the edges top and bottom of PVC wall lining complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with arms 15mm inlet complete all as specified and as directed.

S&F in repairs 15mm size pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and as directed.

S&F in repairs brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F 15mm bore wall mixer 3 in 1 system with provision for both telephonic shower and overhead shower system complete all as specified and as directed.

S&F in repair white vitreous china wash hand basin (Flat back) of size 580mm x 450mm fixed on and including new brackets complete including 15 mm size pillar tap, cast copper alloy, chromium plated with capstan head, screwed down high pressure, screwed shank and fly nuts, screwed for iron pipe, 32mm size brass chromium plated waste coupling, 750mm long PVC waste pipe, PVC connection pipe, 15mm size and 450mm long with PTMT nuts and washer at both end etc complete all as specified and as directed.

M&L in repair bib cock with wall flange complete all as specified and as directed.

M&L in repairs angular stop cock with wall flange complete all as specified and as directed.

S&F chromium plated corner glass shelf size 12 inch with bracket complete all as specified and as directed.

M&L for cutting holes into or through stone/ PCC block wall built cement mortar and making good in CM (1:3) or PCC type B1 on required superficial area exc 150 Sqcm but n 400 Sqcm complete all as specified and as directed.

M&L for french polishing on old surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and as directed.

Excavation in trenches n. exc 1.50 meter wide and n. exc. 1.50 meter depth for foundations etc shafts, well cesspits, manholes, pier holes etc n. exc. 10.00 Sqm on plan and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated soil to a distance exc 50 m but n. exc. 100 m and depositing at a level not exceeding 1.50 m above the starting point complete all as specified and as directed.

Returning filling excavated soil in layer n. exc. 25cm thick including spreading levelling ramming and watering complete all as specified and as directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingn ends and bindingn with and including mild steel wiren (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Item No. 89 above but 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for 5 mm thick rendering in cement mortar (1:4) (as second coat), over and including 10 mm thick rendering in cement mortar (1:6) (as first coat) of fair faces of brick work or concrete surfaces of wall, incl mixing only intergal water proofing compound in second layer only as per manufacturer’s instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- Supply only WPC will be measured & paid separately.

M&L for preparation of new plastered surfaces of walls including pilasters/ cornices etc and applying two coats of acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete.

M&L for providing precast cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) louvers, jallies and jafri wall, 40mm thick including all mouldings set in CM (1:4) complete all as specified and directed.

M&L for provision of fitting of stainless steel grade 304 star size railing with 50mm bore pipe on top, 40mm bore pipe for vertical support on each step and 20mm bore stainless steel pipe 3 Nos as side support parallel to top rail with stainless steel caps and accessories with total fitting of railing at height of 0.9m complete all as specified and as directed.

S&F in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

M&L Makrana Doogri Marble work 25mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

S&F in repairs chromium plated corner glass shelf size 12 inch with bracket complete all as specified and as directed.

M&L of sanding the surface to make it smooth and ready for painting and applying one coat of decorative solvent based primer over the surface applying 2 coats of acrylic wall putty to make the surface smooth after 4-6 hrs drying time and sanding the surface, one coat of decorative solvent based primer should be applied over the arcylic putty to fill the pours one step of sanding should be done before the application of 1 st coat of royale base coat and 2nd coat of royale luxury emulsion diluting with water as per recommanded procedure.After the drying time of 3-4 hrs applying top coat of co polymer based interior special effects emulsion which will not rag or sag on vertical surface with abrasion resistance odourless and non toxic properties to provide different type of special effects such as crinkles dapple weaving,canvas, spatula, colourwash, ragging, sponging, combing, brushing etc with different tools complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & sketch shown under section 8 of SSR Part II complete all as specified and as directed.

S&F factory made factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & sketch shown under section 8 of SSR Part II complete all as specified and as directed.

Taking down chowkats or frame n. exc. 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of old painted surfaces of wall and applying two coats of plastic emulsion paint using roller brush over a coat of wall care putty complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and as directed.

M&L for marble/ granite floor cleaning, buffing, diamond polishing, honing & epoxy restoration of floor for glossy finishing complete as specified and as directed by Engr-in-Charge.

S&F vertical blind with aluminium powder coated channel & PVC runners and fabric blinds fixed to window as per manufacture instruction complete as per sample kept in GE’s office including taking down old vertical blind complete as specified and directed by Engr-in-Charge.

M&L for joint free (edge cut) coloured glazed ceramic brick tiles 10 to 12 mm thick (square/ rectangular) polished as in skirting/ dado/ wall etc laid over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n. exc. 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n. exc. 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in soft/ loose soil complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundation of posts and pillars etc. complete all as specified and as directed.

S&F for mild steel work as trusses (frmed) , trussesed , purlin, rails and other fastening and heavy brackets framing (beam, Tee, angle, channel or fast section) including distance pieces etc Fe-410-w complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and as directed.

M&L for point wiring in repair for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through metallic rigid/ PVC heavy duty concealed conduit/ casing capping/ open coduit with 1.5 Sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories, box made from not less than 1.6mm GI sheet factory made complete all as specified and as directed by Eng-in-Charge for (a) One light/ fan point controlled by one switch complete.

All as per Item No. 115 above but point wiring for one 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 115 above but with cable of size 2.5 Sqmm PVC insulated on independent board for power plug 15 Amps complete all as specified and as directed by Eng-in-Charge.

S&F modular switch one way 6 A,1 Module, complete all as specified and as directed by Eng-in-Charge.

S&F modular switch one way 16A,1 Module, complete all as specified and as directed by Eng-in-Charge.

S&F modular socket 5/6A-2/3 pin combined 2 module complete all as specified and as directed by Eng-in-Charge.

S&F modular socket 16/15A-2/3 pin combined 2 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 3 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 4 module complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 6 module complete all as specified and as directed by Eng-in-Charge.

S&F exhaust fan 250/ 300 mm sweep silent type in PVC Body as required at site complete all as specified and as directed by Eng-in-Charge.

S&F LED tube light fittings 1x20Watts, 230 Volts surface and wall mounted LED type, extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm complete all as specified and as directed by Eng-in-Charge.

S&F LED light fittings 1x10 Watts, single side connection 230 Volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 Sqmm complete all as specified and as directed by Eng-in-Charge.

S&F water heater storage type, electric, capacity 25 litres, BEE 5 star rated complete all as specified and as directed by Eng-in-Charge.

S&F white cover plate with frame, 8 module complete all as specified and as directed by Eng-in-Charge.

S&F 15/18 Watt Octane LED Panel Round Slim, compact, auminum die cast edge lit panel, Recess mounted fixture with opal diffuser and separate electronic driver complete with all accessories internally pre wired, Dimension Ceiling cutout ø 180 mm, height 23 mm ±1 mm for 15 W. Ceiling cutout ø 210 mm, height 23 mm ±1 mm for 18 W complete all as specified and as directed by Eng-in-Charge.

S&F LED edgelit panel driver of 15/ 18 W with universal connector for easy installations complete all as specified and as directed by Eng-in-Charge.

S&F decorative wall mounting chrome finish fixture with opal glass diffuser suitable for 7.5 Watt mini GLS E-27 lamp complete all as specified and as directed by Eng-in-Charge.

S&F 36 Watt Pluto Panel recess mounted 2'x2' LED flat panel cool/ warm white in colour which provides soft-light and glare free symmetrical illumination including connection up with twin core twisted flexible copper conductior cable with suitable size complete all as specified and as directed by Eng-in-Charge.

S&F 12 Watt slim, surface mounted round/ square shape LED down light with die cast body and pressure dicast heat sink having high efficiency complete all as specified and as directed by Eng-in-Charge.

S&F 12 Watt individual/ track mounting accent luminaire of with extruded aluminium heat sink, Integral driver, CRI >80, Beam Angle 24°, 350° Rotational + 90° Angle adjustment with integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm complete all as specified and as directed by Eng-in-Charge.

S&F 24 Watt octane LED Panel Round Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. single side connection 230 Volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 Sqmm, ceiling cutout ø 287 mm, height 23 mm ±1 mm for 24 W complete all as specified and as directed by Eng-in-Charge.

S&F LED edgelit panel driver of 24 W with universal connector for easy installations complete all as specified and as directed by Eng-in-Charge

S&F LED edgelit Panel Driver of 9 W/ 12 W with universal connector for easy installations complete all as specified and as directed by Eng-in-Charge

ALBA AC AND REF SERVICES

divyarsh entrprise

Haritwal traders

ARTI CONSTRUCTION

GIRNAR CONSTRUCTION

DMA PROJECTS

Ramdev and Sons