8420/E8 MAINT AND REPAIR/REPLACEMENT TO BRICK WORK, PLASTERING WORK, PCC FLOORING, CEILING, TILING OF WALL/FLOORING, ROOF TREATMENT, JOINERY, SANITARY AND PLUMBING WORKS INCL INTERNAL ELECT OF OFFRS ACCN UNDER GE (EAST) BAREILLY

Amount

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5sqm each Complete all as specified and as directed by Engineer-In-Charge.

Taking down shutters only n.exc. 2sqm each Complete all as specified and as directed by Engineer-In-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50sqm and n exc 4sqm each Complete all as specified and as directed by Engineer-In-Charge.

Taking down shutters only exc 1.50sqm and n exc 4sqm each Complete all as specified and as directed by Engineer-In-Charge.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed by Engineer -in -charge

S & F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design 2mm thick Prelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core compete all as specified as directed by Engineer -in -charge

S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed

S&F for 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F Glass/gauge shall be measured and paid for separately)

Dismantling of Boarding any description including shutters of existing cup boards complete all as specified and directed.

S&F for 18 mm , prelaminated PVC board exterior grade with one side decorative lamination glossy finish & other side plain white as in shelves, sides, back and doors including PVC lipping on all exposed edges of same texture & shade to match that of laminate, fitted with piano hinges, wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified. Make- Rajshri/greenply/ centuryply Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Frame to be fixed to walls, soffits & base of cupboard with fasterners

M & L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters(02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 4mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed by Engineer -in -charge. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.

M & L for providing Aluminiium shutter with Powder coated frame 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail , middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf , Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated of size 125mm with each leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed by Engineer-In-Charge. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.

Dismantling of Existing Aluminium door/window upto 4 sqm each compete all as specified as directed by Engineer -in -charge

S & F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified as directed by Engineer -in -charge

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed by Engineer -in -charge

S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed by Engineer -in -charge

S & F 300 mm long and Mild steel Chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified as directed by Engineer -in -charge

S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of AOR GE east Bareilly as per site requirements upto 4 storieyed building)

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.compete all as specified as directed by Engineer -in -charge

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed by Engineer -in -charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.Complete all as specified and as directed by Engineer-In-Charge

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish. Complete all as specified and as directed by Engineer-In-Charge

M & L for 75mm thick Cement Concrete type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed

M & L for vetrified light shade ceramic tiles 7-8 mm thick square of size n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.

Ditto all as per item No 25 but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4 complete all as specified and as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15 mm thick screed bed of cement mortar 1;6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed by Engineer-In-Charge..

Ditto all as per item No 27 but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4 complete all as specified and as directed

M & L for coloured glazed ceramic tiles (300 mm x450 mm/300mmx600mm) & 7 mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge.

M&L for PCC 1:11/2:3 , B1(20mm graded aggregate) as in flooring complete all as specified and as directed by Engineer-In-Charge.

M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A as directed by Engineer-In-Charge.

M & L for Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape ,size and colour confirming to IS 15658-2006of 60 mm thickness, M-40 Grade with 40mm tick sand cushion all as specified and directed Engr-in-Charge.

Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended work pavings n exc 15 cm thickness complete all as specified and as directed

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. Complete all as specified and as directed by Engineer-In-Charge

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement complete all as specified and directed

M&L for repairs to sunken floor slab with the following specifications:- (a) Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement. (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivelent for water proofing compound. (e) Graded Brick bats filling under sunken floor of required thickness as per site, (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment.

Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removing all foreign materials / Bitumenous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed by Engineer-in-charge.

M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed including water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge.

M&L for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as given here in after (a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FP with minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method. (c ) Applying two coat of bituminous based aluminium paint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed by Engineer-in-charge. (d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminious paint applied by brushes only.

M & L for cement concrete type C2 (1:3:6) (40 mm graded broken stone aggregate) 75 mm thick as in plinth protection and finish even and fair all as directed by Engr in Charge

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A complete all as specified and as directed

Dismantling Asbestos cement /FRP sheet/GI sheet(corrugated ted, semi corrugated, etc.) sheets in roof coverings up to height 8mtr all as specified and directed by Engr in Charge

M & L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall , fixed with 5 Nos. self tapping screws on each sheet /each support rubber lining and filling of gap with cement mortar in CM 1:4 with wall and sheet up to 6 mtr height . complete all as specified and as directed by Engineer-In-Charge.

Ditto as item no 47 but in ridges of Plain and minimun girth 600mm as directed by Engineer-In-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided as directed by Engineer-In-Charge.

S&F steel work in rolled section as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shape washers etc complete using ERW or induction butt welded tubes confirming and completed to IS 116-1979 grade (medium grade)

S&F in repairs gun metal, globe or gate valve, bore dia of pipe in 15 mm complete all as specified and as directed

S&F in repairs metal, globe or gate valve, bore dia of pipe in 20 mm complete all as specified and as directed

M & L for Galvanised Iron tubes 15 mm dia medium grade with all fittings and fixtures such as bends , elbows ,tees ,short pieces , back nuts , connectors , diminishing pieces caps pegs and clamps union etc. laid in wall/floor/ceiling as in concealed work including taking down and cutting chase in wall and making good surface complete all as specified and as directed .

All as item No. 53 above but dia of tubes 20 mm complete all as specified and as directed

S& F in repair for 20 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed.

S& F in repair for 25 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed.

S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed .

S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head . Including dismanteling and making good the tiles if required of make ,Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge.

S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcomplete all as specified and as directed by Engineer-In-Charge

Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.

S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.

S/F in repair Toilet paper holder chromium plated fixed with CP screws complete all as specified and as directed .

S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . complete all as specified and as directed by Engineer-In-Charge

S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed by Engineer in charge

S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.

S & F for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laid in floors or fixed to walls Complete all as specified and as directed by Engineer-In-Charge.

S&F PVC (SWR)pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC(SWR) branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge.

Dismantling of PVC Pipes of any dia complete all as specified and as directed

Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge

Supply and fixing in repair 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge.

S&F in Repair Stainless Steel Plate Rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.complete all as specified and as directed by Engineer-In-Charge.

S & F in repair PVC floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantel mnaterials complete all as specified and directed by Engineer-in-charge.

S&F of loosed window glasses with oil putty complete with making good complete, window not exceeding 1.50 Sqm complete all as specified and directed

Supply and fixing 3 mm thick figured glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square n exc. 0.5 Sqm each.with hacking out of old glasses Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws . Complete all as specified and directed by Engineer-in-charge.

S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed by Engineer -in -charge

M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal to welded exc 6mm but n exc 9mm for steel windows , ventilators door frames , door hinges , door springs etc compete all as specified as directed by Engineer -in -charge

S & F in repairs curtain rod of CP MS 25 mm dianot less than 1.5mm thickness with chromium plated projected bracket both side as per sample fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge

M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and nexc 100mm depth complete all as specified and as directed.

M/L Double action floor spring hydraulically regulated made ISI marked make: Dorma up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed by Engineer in Charge

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class B bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair one piece EWC with built in twin Flushing fittings including close PP white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.

S & F in Repair viterous china wash hand basin of required size and shape as approved color Counter top of oval /rectrangular shape of thin rim table top wash basin cafe having etc excluding taps, including brackets and CP waste fitting and 32 mm PVC waste pipe . complete all as specified and as directed by Engineer-In-Charge

M/L for easing of door shutters for easy closing /opening tightning of hinges or changing the position of hinges adjustment of tower bolts , sliding door bolts with new screw etc complete all as specified and directed by Engr In charge (rate includes replacement of hinges if required)

M/L for easing of window shutters of any type , kitchen cupboards shutters , show case shutter , drawers including fixing of screws for easy closing /opening tightning of piano hinges or changing the position of hinges adjustment of adjusting of handles, knobs with new screw etc including other small adjustments including repair/ replacement of CP/MS powder coated sliding channels of standrad section by complete all as specified and directed by Engr In charge

labour only for repairing of steel window /ventilator , making good to jamb/corroded portions and hinges , oiling to hinges / replacement of broken friction hinges by box type hinges including all welding , any fabricator work , bending etc and make functionable including any small fittings required etc complete all as specified.complete all as specified and as directed by Engineer-In-Charge

M/L for filling floor /glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly as directed.

Taking down the loosen EWC/WHB/Sink of any description and refixing the same with angle support to wall for WHB and sink, for EWC screwing to floor and side joints filled with white cement for strengthening and making good complete all as directed.

M/L for removing of tree routs, shrubs and bushes from wall surface/roof top/chajjas up to 15 M height including repairing of cracks in cement mortor 1:3 in crarcked surface and making good the surface matching with existing surface including all required ladder and cosider all saftey measures upto ht 15 mts of bldg etc completed and removal of shrubs up to 50 m distance.

Removing of building materials & dabries of any types the rate included in the lead i.e loading ,unloading and stacking/sprading etc outside of MD land with own arrangement by Contractor as directed.

M&L to prevent leakage/seepage from roof shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without waterin 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs .

M&L to prevent leakage/seepage from Nahani trap/ floor trap . Including existing trap shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without water in 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.

M&L for dismanteling the wall/floor tiles and searching the GI tubing leakage point and replace the GI tubing connections and make the position leakage free with in 48 hrs after satisfication refill the dismanteled area with matching tiles with cement mortar and making good complete all as directed.

S&F in repair for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) Plain basket of size 510x470x100 or 520x485x100 mm OR 486X500X100 - 1 No

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) multi size plate basket of size 510x470x150 or 520x485x150 mm or 436 x 500 x200 mm ( clear depth 500 mm -01 Nos

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100 or 520 x485x100 mm or 144x 468 x50mm ( clear depth 500 mm of ) -01 Nos

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) Plain basket of size 510x470x200 or 520x485x200 mm or 486x500x200 mm -02 Nos

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) Pull out with 02 baskets each of size 150x485x80 or 100x485x80 mm -01 Nos ,

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) SS Dust bin ring -01 Nos,

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen as directed :- (a) Telescopic channels as required & including frame work ,handles etc as reqd & all as specified sample & design to be approved by GE.

Cleaning of old PVC water tank of capacity exc.500 & n. exc. 1000 lit. removing all scale and dirt using detergent powder and bliching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writting of cleaning date on tank with paint after removing the old cleaning date complete all as specified & as directed by Engineer in charge. Note : Tank after cleaning shall be shown to the user and got signed by the user and put up to Engr-in-Charge weekly for verification. Any damage to ball cock, float valve, cheaknuts and any leakage/ any interpution in water supply occured to to negligence by Contractor the same shall be rectified by the Contractor and nothing shall be paid extra on this account.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, light fitting cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and including concealed Modular metal flush Box and Modular cover plate for fixing of Modular switches / sockets etc, complete all as specified and directed for light and fan point controlled by one switch. (Note : 1. Rate quoted shall deemed to be inclusive of Modular Metal flush box and cover plate with frame . 2. Rate quoted shall deemed to be inclusive of cutting chasing for taking out old sunken box and fixing modular metal flush box as per site requirement and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.

All as per srl item no. 117 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

All as per srl item no. 117 here-in-before but for one socket outlet 3 pin, 5 Amps on Independent board.

All as per srl item no. 117 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 16 Amp point. Note : The point wiring for power point will not be mixed with light/fan point circuit.

M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through existing PVC Conduit (Concealed in wall/ceiling) , incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed Modular metal flush Box and Modular cover plate for fixing of Modular switches / sockets etc, complete all as specified and directed for light and fan point controlled by one switch. (Note : 1. Rate quoted shall deemed to be inclusive of Modular Metal flush box and cover plate with frame . 2. Rate quoted shall deemed to be inclusive of cutting chasing for taking out old sunken box and fixing modular metal flush box as per site requirement and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.

One light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch complete all as directed..

One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch complete all as directed..

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch complete all as directed..

All as per srl item no.118 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point complete all as directed.

S & F Modular switch 1 way 6A , 1 module size complete all as directed.

S & F Modular switch 1 way 16A , 1 module size complete all as directed.

S & F Modular Bell push 1 way 6A , 1 module size complete all as directed.

S & F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F electric call bell ding dong AC 230 volts Single Pole complete all as directed. Make : Anchor / Havells / Crompton

S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F LED lamp 9/10W complete all as specified and directed by the Engineer-in-Charge. Make : Havells / Crompton / Philips

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Havells / CG / Wipro / Philips

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of wall mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 10W retrofit LED bulb and making necessary electric connection, complete all as specified and directed. Make : Havells (Venza) / Philips / Crompton

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fix in replacement exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. Make : Havells/ Khaitan/ Crompton

M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC Conduit of 20 mm and above incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.

All as per srl item no.138 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through Existing concealed PVC Conduit and accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing if required for extension of existing DB/switch board as per site requirementand making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of extra conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.

All as per srl item no. 140 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 04 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, making disturbed surface good as original using PCC and applying white putty and two coats of OBD as directed by Engr-in-charge complete all as specified and directed.

All as per item No 142 here in before but SPN 12 way Distibution Board

All as per item No 142 here in before but SPN 8 way Distibution Board

All as per item No 142 here in before but SPN 4 way Distibution Board

S&F in replacement Vertical TPN Loadline with and including MCCB 100 Amps as incomer complete including taking down old DB and making disturbed surface good as original using PCC and applying white putty and two coats of OBD as directed by Engr-in-charge

S&F in replacement of MCB, C Curve type, 10 kA, 63 to 100 Amp, TPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 63 to 100 Amp TP with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 32 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, B Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as directed.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

M & L for rewinding of burnt fan motor of 1200/1400 mm sweep using super enameled copper wire of of suitable size including replacement of bearing, cleaning and connecting up with flexible copper wire of approprite size ceiling rose to fan complete all as specified and direcred

M & L for replacement of heating element 1.5/2 KW of existing shape and size complete all as directed.

S&F in replacement DBOX MCB protected Socket plastic base dimension 415 x 375 x 225mm 4 module raise neutral link complete with one single pole MCB 20 Amp 'C' Series 240 VOLT including making disturbed surface good as original using PCC and applying white putty and two coats of OBD as directed by Engr-in-charge

S&F in replacement DBOX MCB protected Socket plastic base dimension 415 x 375 x 225mm 4 module raise neutral link complete with one single pole MCB 20 Amp 'C' Series 240 VOLT including making disturbed surface good as original using PCC and applying white putty and two coats of OBD as directed by Engr-in-charge

j u enterprises (BID ID -3343173)

NETRAPAL SINGH (BID ID -3340602)