Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-AOC | ₹1.2 Cr | L-1 | Accepted-AOC Being lowest |
| 2 | L-2₹1.2 Cr+₹3.4 L (2.82%)Rejected-AOC HPSEBL THALOUT | ₹1.2 Cr+₹3.4 L (2.82%) | L-2 | Rejected-AOC Not Found Lowest |
Tender Value
₹97.5 L
EMD Value
₹1.3 L
Closing Date
20 May 2020, 6:00 pmClosed
Executive Engineer
HPPWD Division Sunder Nagar
SH Construction of 2nd Floor over Block-D with WS and SI
2020_PWD_37051_1
PW-SNR-CB-E-Tender/19-291-303 dt 23.04.2020
Open Tender
Civil Works - Buildings
Item Rate
365 days
Sundernagar
AS per Bid Document
12 documents required · 12 mandatory
₹2,000
EE Sundernagar
₹1.3 L
12 Oct 2020
9 May 2020
21 May 2020
9 May 2020
20 May 2020
9 May 2020
Amount
Demolition above G.L.upto all floor level including disposal of unserviceable materials un-reinforced cement concrete more than 15cm ( fifteen centimetre ) thickness as per direction of Enginer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials with in all leads ,lifts and other incidentals
Columns, Pillar posts and struts, square, rectangular or polygonal in plan including carriage of materials with in all leads, lifts and other incidentals.
Beams, cantilevers, girders and lintels, side and sofits of beams, beam haunchings cantilevers, bressumers and lintels upto any depth / length depth in all height in all floor level including carriage of materials with in all leads, lifts and other incidentals.
Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness including carriage of materials with in all leads, lifts and other incidentals.
Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentals.
Providing and laying reinforced cement conetre design mix M-25 ( twenty five ) grade mechnically mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced cement concrete work . The mix shall be desingned as per requirement of I.S code and P.W.D specification . The design mix will be got approved from the Engineer - in- charge prior to the casting. The theoritical conumption of cement for the item shall be worked out as per approved design mix as per I.S code including carriage of materials within all leads , lift and other incidentals. ( i) Suspended floors roofs landings and shelves and these supports balconies beams , girders, bressumers and contilevers upto floor level including and curing complete including carriage of materials with in all leads lifts and other incidental charges in all respect as per direction and satisfection of Engineer - in chage .
Columns, Pillar posts and struts, square, rectangular or polygonal in plan including curing and carriage of materials with in all leads, lifts and other incidentals.
Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals.
Providing and laying 20 cm. ( twenty cnetimatre ) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6(one cement :six sand) and concrete backing with cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20 mm.( twenty millimetre ) nominal size) on inner face of walls including centring,shuttering and propping complete up to floor two level. including carriage of materials with in all leads, lifts and other incidentals.
Second class brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) including curing and carriage of material within all leads, lifts and others incidentals .
Second class half brick masonry in common burnt clay building bricks in super structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) including curing and carriage of material within all leads, lifts and others incidentals .
Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position second class deodar wood including carriage of material within all leads, lifts and other incidentals .
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws 40 mm(forty millimetre ) thick in 2nd class deodar wood including carriage of material within all leads, lifts and other incidentals .
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm ( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm( forty millimetre) thick second class deodar wood including carriage of material within all leads, lifts and other incidentals .
Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads, lifts and other incidentals .
Providing and fixing 19mm ( nineteen millimetre ) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads, lifts and other incidentals .
Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately)6 mm ( six millimetre ) thick including carriage of material within all leads, lifts and other incidentals .
Providing and fixing 1.00mm ( one millimetre ) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of material within all leads, lifts and other incidentals .
Providing and fixing 1st class deodar wood. square edges cover fillets (beading) 19mmx6mm ( nineteen millimetre x six millimetre ) section including mitring at junctions with wood screws and nails complete including carriage of material within all leads, lifts and other incidentals .
Providing and fixing bright finished brass furniture handles including carriage of material within all leads, lifts and other incidentals .
Providing and fixing bright finished brass ball catcher 10 mm( ten millitre dia including carriage of material within all leads, lifts and other incidentals .
Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete 300x16mm (three hundred x sixteen millimetre) including all leads , lifts and carriage of material and other incidentals.
Providing and fixing aluminum tower bolts (barrel type) anodized, transparent or dyed to required shade and colour with screws etc. complete.including carriage of material and other incidentials in all leads , lifts and as per the direction of the Engineer-in Charge
200x 10mm(two hundered x ten millimetre ).
150x10mm ( one hundred fifty x ten millimetre )
Providing and fixing oxidized M.S. handles with the necessary screws etc. complete..including carriage of material with in all lead , lifts and other incidentials
125 mm(one hundered twenty five x ten millimetre ).
100mm ( one hundred millimetre )
Providing and fixing 100mm ( one hundrd millimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materialwith in all leads, lifts and other incidentials
Providing and fixing bright finished hard drawn hooks and eyes 150mm ( one hundred fifty millimetre ) including carriage of material and other incidentials .
Providing and fixing bright finished or/and black enamelled iron (Helical door spring 150mm ( one hundrd fifty millimetre ) including carriage of material and other incidentials .
Providing and fixing white glazed tiles 6 mm ( six millimetre ) thick in skirting risers of steps and dado 12 mm( twelve millimetre ) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry. including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing 10mm ( ten millimetre )thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred six hundred x ten millimetre ) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm ( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications including carriage of materials with in all leads, lifts and other incidentals.
Providing and laying spartic ceremic tiles 5.5mm. ( five point five millimetre ) thick in flooring 300 x300mm. ( three hundred x three hundred millimetre ) size treads of steps laid on a bed of 12mm ( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals.
Providing and laying granite stone in flooring 20mm ( twenty millimetre ) (average) thickness base of cement mortar 1:3(one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm ( twenty millimetre ) thick in all floors including curing and carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing Kota stone slab flooring 20 mm ( twenty millimetre ) (average) thick base of cement mortor 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 25 mm ( twenty five millimetre ) thick. including carriage of materials with in all leads, lifts and other incidentals.
15mm ( fifteen millimetre ) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering above floor to all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm ( eighty millimetre ) in girth and finished even and smooth. in cement mortar 1:4 (one cement : four sand) including curing and carriage of materials with in all leads, lifts complete in all respect as per direction and stispection of Engineer - in Charge .
15mm(Fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering above floor to all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm ( eighty millimetre ) in girth and finished even and smooth. in cement mortar 1:4 (one cement : four sand) above plinth level upto floor any level. including curing and carriage of material within all leads, lifts and others incidentals .
6mm ( six millimetre ) Cement plaster to ceiling In Cement mortar 1:3 (one Cement: three Sand) including curing andcarriage of material within all leads, lifts and others incidentals .
Providing and fixing 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coting of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with pre painted iron J or L hocs, boalts and nuts 6mm dia and prepainted GI limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .
Providing and fixing M.S. BP Sheet 1.66mm to 2mm ( one point sixty six millimetre to two millimetre thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 15cm (fifteen centimetre) wide 45cm (forty five centimetre) over all semicircular plain G.I. sheet gutter with iron brackets 40x3mm (forty x three millimetre) size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete as per design 0.63mm (zero point sixty three millimetre) thick sheet including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coting of 20 microns over 5 microns primer coating + back coat of polister of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hocs, boalts and nuts 6mm dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required including carriage of material within all leads, lifts and other incidentals .
Providing and fixing valley 60 cm ( sixty centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5( five ) microns over 5 ( five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. including carriage of material within all leads, lifts and other incidentals .
Steel work welded in built up sections, trusses and framed work including cutting, hosisting fxing in position and applying a priming coat of red lead paint.
In beams joists channels, angles, Tees, flats with connection plates or angle plates as in main and cross beams, hip and jack rafter, purlins connected to comman rafter and the like including carriage of material within all leads, lifts and other incidentals .
Providing and fixing 100mm ( one hundred millimetre ) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals .
Providing and fixing on wall face PVC ( O- plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals .
Plain shoe 100 mm ( one hundred millimetre )
PVC clamp .
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of material within all leads, lifts and others incidentals .
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material within all leads, lifts and others incidentals .
Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering & knotting with Readymixed paint brushing with white lead for priming complete including carriage of materials with in all leads, lifts and other incidentals.
Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With enamel paint other than white including carriage of materials with in all leads, lifts and other incidentals.
Painting two coats (excluding priming coat) on steel or metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter, sand papering and stopping:(a) With enamel paint other than white.including carriage of materials with in all leads, lifts and other incidentals.
WS&SI Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.
15mm (fifteen millimetre) nominal bore.
Providing and fixing P.V.C. storage tank complete 40mm (forty millimeters ) nominal bore galvanized mild steel scour tube with flitting 25mm(twenty five millimeters ) nominal bore galvanized mild steel over flow tube with fitting and mosquito proof couplings of approved municipal design 15mm ( fifteen millimeters) nominal bore ball valve and mosquito proof coupling PVC cover and locking arrangement including providing pads of size as required for inlet and out let hole including hosting up to all height above ground level 1000 (one thousand liters) net capacity as per the direction of Engineer -in Charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) Orissa Pattern including carriage of material within all leads, lifts and others incidentals .
Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and cover to be measured and paid for separately):- Ordinary closet including carriage of material with in all leads, lifts and others incidentals .
Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers SOLID TYPEwhite plastic seat and cover including carriage of material with in all leads, lifts and others incidentals .
Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material within all leads, lifts and others incidentals .
Flat back 550mmx400mm (five hundred fifty millimetre x four hundred millimetre )
Angle back 400 mm x 400mm (four hundred millimetre x four hundred millimetre )
Providing and fixing vitreous China pedestal of approved specification /make for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material with in all leads, lifts and others incidentals .
Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including jointing with approved adhesive etc. including carriage of material within all leads, lifts and others incidentals .
110 mm( one hundred ten millimetre ) dia
75 mm( seventy five millimetre ) dia
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .
110 mm( one hundred ten millimetre ) dia
75 mm( seventy five millimetre ) dia
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .
110 mm( one hundred ten millimetre ) dia
75 mm( seventy five millimetre ) dia
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .
110 mm( one hundred ten millimetre ) dia .
75 mm( seventy five millimetre ) dia .
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .
110 mm( one hundred ten millimetre ) dia .
75 mm( seventy five millimetre ) dia .
Providing and fixing PVC offset ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .
110 mm( one hundred ten millimetre ) dia .
75 mm( seventy five millimetre ) dia .
Providing and fixing 110 mm X 75 mm. (one hundred ten x seventy five millimetre ) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material within all leads, lifts and others incidentals .
providing and fix ing PTMT coloured / white high density polyethylene / poly propylene 10( ten) litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm ( fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm ( forty millimetre ) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete in all respect including carriage of material within all leads, lifts and others incidentals .
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm ( four hundred thirty x two hundred sixty x three hundred fifty millimetre ) and 340x430x265mm ( three hundred forty x four hundred thirty x two hundred sixty five millimetre ) sizes, respectively with automatic flushing cistern with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required one urinal basin with 5 litres C.I. automatic flushing cistern including carriage of material within all leads, lifts and others incidentals .
Providing and fixing Division Plate for Urinals 600mm x 300 ( six hundred x three hundred millimetre ) Vitreous China including carriage of material within all leads, lifts and others incidentals .
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S.Brackets painted white including cutting holes and making good the same but excluding fitting 610 x 510 mm ( six hundred ten x five hundred ten millimetre ) with bowl depth 200 mm. ( two hundred millimetre including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 32 mm ( thirty two millimetre ) C.P. Brass waste of approved specification/make for wash basin or sink compete in all respect including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 600 x 450 mm ( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm ( six millimetre ) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 600 x 20mm ( six hundred x twenty millimetre ) C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 600 x 120 mm ( six hundred xone hundred twenty millimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P.Brass screws. including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 15 mm dia ( fifteen millimetre) dia metre C.P Brass pillar tap heavy duty with Capstan head including carriage of material within all leads, lifts and others incidentals .
Providing and fixing one hole basin mixing Faucet including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 15mm( fifteen millimetre ) mixer for kitchen sink with top / bottom swinging spout including carriage of material within all leads, lifts and others incidentals .
Providing and fixing 15mm ( fifteen millimetre ) dia CP bib tap heavy duty ( long body ) with capstan head & flanges including carriage of material with in all leads, lifts and others incidentals .
Providing and fixing 15mm ( fifteen millimetre ) dia C.P Brass angle valve without nuts and pipe including carriage of material with in all leads, lifts and others incidentals .
Providing and fixing 15mm ( fifteen millimetre ) dia brass full way value with wheel within all leads , lifts of material and other incidentals .
Providing and fixing PVC waste pipe 32mm dia ( thirty two millimetre ) within all leads , lifts of material and other incidentals .
Providing and fixing PTMT jet with 1.5 mtr ( one point five metre ) PVC tube within all leads , lifts of material and other incidentals .
Providing and fixing P.V.C connection pipe with brass unions 300/450mm ( three hundred / four hundred fifty millimetre ) length 15mm ( fifteen millimetre ) nominal bore complete in all respect inculding carriage of materials within all leads , lifts of material and other incidentals .
Providing and fixing 100 mm ( one hundred millimetre ) dia chromium plated grating of superior quality for floor, gully or nahani trap within inculding carriage of materials within all leads , lifts of material and other incidentals .
Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws inculding carriage of materials within all leads , lifts of material and other incidentals .
Naresh Kumar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .