CWE KOTA/ALW-41OF 2019-20 SPECIAL REPAIR TO BLDG NO. 341/01 TO 04 AND 347/01 TO 04 OR MD ACCN AT ITARANA ALWAR

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. pointed in any mortar complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Taking down carefully existing bitumen tarfelt, including plaster of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc. and removing of the rubbish to a distance exc. 500m but n. exc. 1.00 km and depositing whre directed, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircase, landings, chajjas and similar suspended work complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as directed.

Taking down shutter of any description exc 1.0 sqm but n.exc 2.0 sqm each leaf and and removing from site complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the primises, complete all as specified and directed.

Removing steel window shutters by cutting hinges by welding and making good any damage occurred during removal of shutters not exceeding 0.75mm each, complete all as specified and directed.

Dismantling of 75mm/110mm AC Pipe/ PVC Pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

M&L for drilling holes for pipes etc. in cooking plateform stone slab including RCC slab n exc. 25mm dia and exc. 100mm depth complete all as specified and directed.

Taking up or down steel tubing and connections alongwith bib tap, stop cocks and other fittings including cleaning for refixing or removal complete all as specified and directed:-

15mm bore.

20mm bore.

Dismantling water tank of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs and removal from site complete all as specified and directed .

M&L for use and waste of flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

M&L for use & waste of form work to edges of rough finished surfaces of concrete flats, treads, breaks in floors, window cills concrete railings, opening in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls horizonal or sloping and similar work exc 10 cm, but n.exc 20 cm wide complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of chajjas for fair using 20mm graded broken stone agrreate as in Chajjas and the like, complete all as specified and directed.

M&L for Reinforced Cement Concrete type B-1, 1:2:4 nominal mix using 20mm graded broken stone aggregate as in slabs supported on walls beams and columns in floors, roofs, landings, shelves and the like, complete all as specified and directed.

M&L for Reinforced Cement Concrete type B-1, 1:2:4 nominal mix using 20mm graded broken stone aggregate as in chajjas and the like, complete all as specified and directed.

M & L for brick work with sub class- B bricks, straight or curved on plan to any radius in half brick thick walls, built in CM in 1:4 complete all as specified and directed.

S & F 7.5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n exc. 2 m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 and including dismantling of old stone slab complete all as specified and directed.

S & F 35mm thick factory made IInd Class Hard wood (Hollock) plain framed, panelled door shutters two panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S & F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F Glass/gauge shall be measured and paid for separately).

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 10mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2010).

S & F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 given in SSR Part - II.

S & F 100 mm size butt hinges, medium weight, colled rolled mild steel & ISI marked complete all as specified and directed.

S & F 75mm size butt hinges, medium weight, colled rolled mild steel & ISI marked complete all as specified and directed.

S & F 100 mm size stainless steel butt hinges, medium weight, & ISI marked complete all as specified and directed.

S & F 200mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F 150mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F Power coated Aluminium (thickness of powder not less than 50 micros) frame for door, window, ventilator with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S & F 125mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F curtain rod of metalic 20 mm dia chromium plated including bracket both side fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw, complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L for TMT bars 6 to 8 mm dia, cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F for pressed steel cupboard shutter with frame, Godrej Pattern, shutter made out of 1mm thick mild steel sheet and frame made out of 1.25mm thick mild steel sheet and including chromium plated MS handle with proper locking arrangment (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 06 Nos 12mm dia bolt 150mm long grouted in brick wall/concrete including making good the distrubed sufaces as original complete all as directed. Note : The measurment shall be taken of front elevation and not girthwise.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium windows and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated anodised aluminium fittings such as peg stays 150mm long (01 No. for each leaf), Butt hinges type B-21 100mm size (02 Nos for each leaf) & handle (01 No for each leaf) etc complete all as specified and directed. (Note :- Glazing/wire mesh shall be measured and paid separately under respective items of Schedule.)

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as directed. (Note : Water proofing liquid shall be measured and paid separately)

Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or Hydro Stop manufactured by TIKITAR DANOSA (INDIA) Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete all as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in under floor tiles, surfaces finished even and fair complete all as specified and directed.

M & L for 18-20mm thick machine cut Kota stone as in riser such as steps, skirting, dado and pillar set etc over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick cement plaster in CM (1:4) on other than fair faces of brick work of stone surfaces of walls complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, laid over and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, laid over and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting, laid over and including 10mm thick plaster in cement mortar 1:6 including necessary cutting of tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for 50mm thick PCC 1:3:6 , type C-1 using 20 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 2 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M & L for plastering 5mm thick on concrete surface of ceiling in CM 1:3, (Sunshed, chajja etc.) finished surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 on fair faces of stone masonry or concrete surfaces, mixed with liquid water proofing admixture @ 150 ML Per Bag of Cement finished with even and smooth complete all as specified and directed.

M & L for 10mm thick rendering internal surfaces in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L 375/250/7-8mm/450x300x7-8mm mm thick glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in white or coloured coloured cement to match the shade of tiles over and including 10mm thick cement plaster in CM 1:4 on other than fair faces of brick work or stone surfaces of walls complete all as specifed and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing old plastered surfaces and applying two coats of white wash on old decorated surfaces of ceiling complete all as specified and directed.

M&L for preparation preparing plastered walls surfaces and applying two coats of distemper with oil emulsion white over a coat of alkali resistant primer complete all as specified and directed

M & L for preparing old plastered surfaces of walls and applying two coats oil bound distemper on old decorated surfaces of walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying two coats of white wash, complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of water primer, complete all as specified and directed.

M & L for preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of cement based paint white or tined on walls including cornices etc. complete all as specified and directed.

M & L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of 1st grade quality over and including one coat of pink primer complete all as specified and directed.

M&L for preparation of old or previously treated painted wooden or wood based surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for preparation of old or previously treated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S & F 4mm thick frosted/figured sheet glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floor etc ) complete all as specified and directed for following bore:- Note : Old serviceable water tubing retrieved from taking down here-in-before shall be used. The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

15mm bore.

20mm bore.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as directed.

S & F in repairs 15mm bore bib tap cast copper alloy fancy type chromium plated long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15mm bore stop valve/angle cock valve, cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup concealed type with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm bore stop valve, cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup concealed type with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy chromium plated with capstan head screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed fly nuts, screwed for iron pipe and fixed complete all as specified and directed

M&L for gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed.

S & F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. Note : PVC tanks shall be ISI marked and having two layers.

S & F ball valve high pressure of PTMT suitable for 20mm bore pipe (minimum weight -210Gm) with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as directed. Make:- Prayag or equivalent as approved by GE.

S & F in repair Brass chromium plated swivel shower rose of 125mm size for fixing with 15mm GI pipe, complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, “D” type, 60cm long between flanges, fixed with chromium plated brass screws complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed for following sizes:-

75mm bore.

110mm bore.

S & F PVC(SWR) bend of any radius complete all as specified for following sizes:-

75mm bore.

110mm bore.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with holder bat clamps of GI flat iron 25x3mm complete all as specified and directed for the following sizes:-

75mm bore.

110mm bore.

S & F PVC (SWR) junction single, (single T) equal or unequal of 110 mm bore with oval access door complete all as specified and directed.

S & F PVC (SWR) junction single, (single T) equal or unequal of 75 mm bore complete all as specified and directed.

S & F 110mm dia PVC (SWR) WC connector bent type complete all as specified and directed

S & F PVC (SWR) vent cowl for 110 mm bore of pipe complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement, complete all as specified and directed.

M & L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 450 x 300 mm including one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as directed.

S & F in repairs vitreous China squatting pan (Orissa pattern) water closet (white) of size 580 mm x 440 mm with integral foot rests, 'P' or 'S' trap, including connection to trap, flushing pipe and antisyphonage pipe etc and including provision of PCC (1:5:10) type E-2 lean concrete in filling, making good to floor (excluding flushing cistern and flush pipe etc) complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.

Supply 32mm dia high density polyethylene (HDPE) pipes of pressure rating 6Kg/ Sq cm laid in floor or fixed to walls inclduing taking down old pipes complete all as specified and directed.

Supply 40mm dia high density polyethylene (HDPE) pipes of pressure rating 6Kg/ Sq cm laid in floor or fixed to walls inclduing taking down old pipes complete all as specified and directed.

S & F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S & F PVC connection 15mm dia 450mm long with PTMT check nut and washer etc complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of size 900mm x 1000mm x 200mm fabricated out of Ist quality 0.6mm thick stainless steel sheet complete all as specified and as directed.

M&L 16-18mm thick granite slab "Z" Black Colour as approved by GE (of any type table rubbed and polished) in steps, jambs pillars, window cills, cooking platforms and like over and including 15mm thick screed bed in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for water proofing treatment in sunken floors as described hereunder:- (i) Provide 50mm thick PCC 1:1.5:3 type A-0 using 10/12.5 mm graded stone aggregates laid over slab of sunken floor after applying cement slurry for filling undulations finished fair and even without using extra cement (i) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick cement plaster in mortar 1:4 mixed with water proofing compound @ 3% by weight of cement. (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or Hydro Stop manufactured by TIKITAR DANOSA (INDIA) Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, (weight not less than 150 gms/sqm) with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and the joints sealed properly all as per manufacturer’s instructions, and providing a cushion layer of coarse sand of thickness 25mm to protect polymeric membrance complete all as specified and as directed. Note: (i) Polymeric membrane shall be laid in sunken floor and on sides upto finished floor level (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing compound shall be measured and paid separately).

E/M PORTION Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens or from existing conduits with all fittings, such as switches, ceiling rose, pendants, sockets, lamp holder, fan regulators, sketch/brackets light fittings (except tube light fitting) etc but excluding ceiling fan and removal of old material from site (except fittings to be reused) and making good disturbed surfaces of walls, floors ceiling etc complete all as specified and directed to match with existing surfaces.

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping double locked box type with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per IS with MS concealed terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite (Hylam) sheet top cover for mounting switches, sockets, regulators, bell push etc, including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light point controlled by one, one way switch

One light point controlled by two Nos, two way switches.

One fan point controlled by one switch and regulator.

One bell/buzzer point controlled by one bell push

3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same baord

3 pin 5/6 Amp socket outlet controled by one 5 Amp switch on independent board.

M & L for point wiring complete for 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping double locked box type with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per ISS with MS concealed terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite (Hylam) sheet top cover for mounting switches, sockets, including 2.50 Sq.mm multistranded copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly.

S & F switch piano flush type 5/6 Amps, single pole, one way, 230 Volts complete all as specified and directed.

S & F switch piano flush type 5 Amps, single pole, two way 230 Volts complete all as specified and directed.

S & F switch piano, flush type single pole, one way 15 Amp, 230 Volts complete all as specified & directed.

S & F socket outlet two-in-one, 3 pin (with 2 pin outlet also), 5/6 Amp, flush type, 240 Volts complete all as specified & directed.

S & F socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp, flush type, 240 Volts complete all as specified & directed.

S & F bell push, flush type, 5 Amp complete all as specified & directed.

S & F bell/buzzer, AC, 230 Volts, single pole complete all as specified & directed.

S & F ceiling rose, surface bakelite 65mmx50mm two or three terminal, complete all as specified and directed.

S & F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F electronic fan regulator, flush type and connecting up, ISI marked socket size, 240 Volts complete all as specified and directed.

S & F MCB SP 6 to 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S & F MCB SPN 32 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F MCB SPN 63 Amps, 240 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I, complete, all as specified & directed.

S & F sheet metal enclosure single door DB SPN 2 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 complete all as specified and directed.

S & F sheet metal enclosure double door DB SPN 4 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F sheet metal enclosure double door DB SPN 8 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

Supply and fix decorative ultra slim round profile LED tube light fittings, fixture 18 Watt 230 V, 50 Hz with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete with all standard fittings etc pre-wired including LED tube and connecting the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. {Model/Make : Cat Part No LHEXBHP7IN1W018 E-LITE LED PRIDE PLUS of make Havells or equivalent model of make Philips/Crompton Greaves Ltd/ Wipro/Bajaj.

Supply and fixing LED street light fitting 20 Watt 230 V, 50 Hz DRACO lightand connecting the fitting from using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. Make:- Series Cat Part No LTESS20WLED of make C & S or equivalent model of make Crompton Greaves Ltd/Shakti Fixtures Pvt Ltd/Surya Roshni Limited/Syska LED Lights Pvt Ltd (SYSKA),

Taking down old unserviceable CFL lamp and Supply and fix LED lamp of 10 Watt complete all as specified and directed. {Model/Make : Model ADORE 10W E27 CDL Ball lamp Cat Part No. LHLDERHEML8X010 of make Havells or equivalent model of make Philips/Wipro/Surya/Bajaj/CG}..

S & F in repairs second class hardwood rectangular block open recessed of size 30cm x 25cm x 5 cm depth with 3 mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed.

S & F in repair for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit 25mm bore fixed on surface to wall/ ceiling by means of MS screws and saddles including one run of 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: - Two runs of main cable, one run of earth continuity conductor and one run of conduit will be measured and paid as one length only.

Supply/Laying / fixing, jointing, testing and commissioning in repair of 2 core 16 Sqmm LT under ground cable 1100 volts grade XLPE insulated & PVC sheathed cable heavy duty armoured, with multistranded aluminium conductor laid in trenches/ ducts/ pipes/fixed on walls/poles complete all as specified and directed. NOTE :- (a) Excavation & earth work , GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid for seprately under respective items of the BOQ (b) Road cutting involved during excavation for laying of cables etc shall be made good as per existing road. Nothing extra shall be admissible on this account. Quoted rates of the item shall be inclusive of the above provisions.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose soil complete all as specified and directed.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for brick protection for UG XLPE cable with burnt clay FLY ASH bricks, old size laid dry and flat abutting each other with gaps between adjacent brick 10mm with width equal to length of brick in trenches across the cable complete all as directed.

M & L for dry sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

Supply and fixing cubical metallic box of size 1.0 Mtr x 0.9 Mtr x 0.30 Mtr depth shall be dust and vermin proof IP-51 class protection and made out of 2 mm thick CRCA MS steel sheet, front openable with locking arrangement, 4 Nos 3 mm thick plain sheet clear glass of suitable size fixed to door of box as per standard engineering practice to facilite meter reading, all internal and external steel surfaces painted with two coats of synthetic enamel paint over a coat of red oxide primer, internal wiring with PVC insulated single core multistranded copper conductor FRLS cable IS - 694 marked of adequate size but not less than 6 Sqmm with proper ferrule and cable gland. Box fixed on wall with 'Anchor' type /fastner type bolts and nuts (set of 6 bolts of 12 mm dia 200 mm long with nuts and washers), grouted into the wall properly to hold the box, writing MES/Qtr No for each energy meter with thick white synthetic enamel paint, provision of neoprene rubber gasket for proper sealing. Box shall have arrangement for fixing following components:- (a) Electic energy meter - 04 Nos (b) MCB DB SPN 2 way - 4 Nos (c) MCB DB SPN 4 way - 01 No Note :- (i) Taking down carefully existing electric meters(04 Nos) will and refixing the same inside the new meter box carefully including necessary electric connections and sealing the electric meter shall be deemed to be inclusive in quoted rate. (ii) Making good the disturbed surfaces to match with existing by applying cement plaster and surface finish of walls as per existing norms shall also be deemed to be inclusive in quoted rate. (iii) MCB DB SPN 4 Way - 01 No and MCB DB SPN 2 Way - 4 Nos shall be measured and paid for separately under relevent items of BOQ.

M & L for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6.30 mm thick buried vertically in ground to depth not less than 2.25 metres deep below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel besides welding at all joints as shown in drawing and including excavation and earth work, GI pipe light grade 40mm bore for protection of strip and connected to continous earth lead on pole/test point, supplying and laying charcoal dust common salt PCC 1:2:4 type B1, chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe medium grade for watering all as shown in electrical plate No 5 on srl page No 497 of SSR Part I (2009) drawing and connection to earth test point including testing and including dismantling and taking out old earthing complete all as specified and directed. Note : (i) The cost of earth lead /strip and GI pipe for protection of earth lead/strip upto 7.5m is included in the quoted rate. (ii) The cost of excavation, earth work is included in the quoted rate.

M & L for Machine cut Kota Stone slab flooring 18 to 20 mm thick size not less than 22" X 22" laid and jointed with grey cement slurry mixed with plgment to match the shade of the slab over and including 20mm thick cement screed bed in cement mortor 1:6 including rubbing and mirror polishing complete all as specified and directed.

UNIQUE INDIA CONSTRUCTIONS

ARUN ENTERPRISES