Comprehensive Maintenance of Md Accn of RIMC under AGE B/R-II of GE Dehradun.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and directed.

Material and labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:6, surface finished fair and even complete all specified and directed

Material and labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4, surface finished fair and even complete all specified and directed

Material and labour for rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling, complete all as specified and ditected.

Demolition of stone/ boulder masonry, built in cement/ lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.

Material and labour for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , using old size bricks complete all as specified and directed.

Material and labour for vitrified ceramic tiles light coloured (square/rectangular) thickness 8-9 mm thick, exceedign 0.36 Sqm but not exceeding 0.42 sqm in floors etc set & jointed in neat cement slurry @3Kg/sqm & pointed in coloured cement to match the shade of tiles including and over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Description all as per item No 7 here in above but as in skirting and over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour for glazed ceramic tiles light coloured of size not less than 300x450 mm and thickness 7-8 mm, on vertical surfaces such, set & jointed in neat cement slurry @3Kg/sqm & pointed in coloured cement to match the shade of tiles including and over rendering 10 mm thick in CM 1:4 on wall complete all as specified and directed.

Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry @3Kg/sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

Description all as per item No 10 here in above but as in skirting and over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed.

Material and labour for form of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Supply and fix for mild steel TMT bar 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below/above ground level) including floor finishes complete all as specified & directed.

Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement, complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring, complete all as specified and directed.

Material and labour for min 40 mm thick cement concrete 1:2:4 type B-O m (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified and directed.

Material and labour for factory made pre polished rubber moulded vibromatic Chequred cement concrete colour tiles of size 30 cm x 30 cm and 22 to 25mm thick, set jointed and pointed in neat cement slurry @3Kg/sqm with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6), complete all as specified and directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment ,complete all as specified and directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry @3Kg/sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.

Material and labour for 20 mm thick granite work (table rubbed and polished) for in steps, Jambs, pillars, win-down-cills, cooking plat-forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtur of pigment to match with shade of granite including dismantling of old stone, complete all as specified and directed.

Taking down chowkats or frames with shutter not exc. 1.5 Sq mtr each with shutters (without taking off shutters) from the frames, complete all as specified and directed.

Taking down chowkats or frames with shutter exc. 1.5 Sq mtr but n exc. 4 Sqm each with shutters (without taking off shutters) from the frames, complete all as specified and directed.

Taking down shutter of any description exc 1.0 sq.m but n.exc 2.00 Sqm each, complete all as specified and directed.

Supply and fixing of Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.50mmm Panel :- 4mm thick ACP sheet / 5mm thick tinted/frosted glass of approved colour and design etc complete all as specified and directed.

Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 125x60 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termiteproof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 105x60 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termiteproof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

Supply and fixing PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

Supply and fixing 30 mm thick WPC factory made 100% solid flush door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.

Supply and fixing 30 mm thick WPC factory made Glazed and skeleton shutter (conforming as per IS-4020) made from 100% lead free single extruded open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

Supply and fix for stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails, complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed.

Supply and fix for stainless steel Butt Hinges medium weight,100 mm fixed to steel/wooden shutters complete all as specified and directed.

Supply and fix for stainless steel barrel tower bolts 200 mm size, stove, with bright bolt, complete all as specified and directed.

Supply and fix for stainless steel handles 150 mm size complete fixed complete all as specified and directed.

Supply and fix for stainless steel sliding door bolts 'bolt type' 300 mm size stove enamelled black with and including 6 nuts and bolts, complete all as specified and directed.

Supply and fix 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Dismantling block board/ boarding of any description and in any position complete including iron mongries ,complete all as specified.

Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed.

Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed.

Supply and fix for magnetic catcher and striking plate including letting in and fixed, complete all as specified and directed.

Supply and fix for Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Supply and fixing in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum), complete all as specified and directed.

Repair to steel window of any size by replacing worn out hinges or worn out portion such as glazing bars, fitting and fixture positioning of shutters etc. and cleaning the window surrounding and renewal of fitting and fixture (unserviceable) including greasing, oiling complete all as specified and directed.

Supply and fix for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass, complete all as specified and directed.

Supply and fix for 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass,complete all as specified and directed.

Supply and fixing in repair stainless steel peg sets (minimum 5 hooks each) secrewed to wall ,complete all as specified and directed.

Supply and fix for 15 mm bore pipe medium grade, ISI marked, galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.

Supply and fix for 20 mm bore pipe medium grade, ISI marked, galvanised iron with all fittings fixed to wall and ceiling or laid in floor including taking down of old unserviceable pipes, complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks white colour of capacity 500 litres tripple layer, not less than 18 Kg (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks white colour of capacity 1000 litres tripple layer, not less than 33 Kg (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

Supply and fixing in repair 15 mm dia gate valve with Iron flange head Screwed both ends for Iron Pipe and fixed in repairs (ISI Marked ) Complete all as specified and directed

Supply and fixing in repair 20 mm dia brass forged ball gate valve with Iron flange head Screwed both ends for Iron Pipe and fixed in repairs (ISI Marked ) Complete all as specified and directed

Supply and fixing in repair heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ltrs tank ,complete all as specified and directed.

Material and labour for Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

Description all as per serial item No 65 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr ,complete all as specified and directed.

Supply & fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc, complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor, complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, connecting to stack pipe and to flushing pipe and complete including making good to floor, complete all as specified and directed.

Supply and fixing in repair Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes with Urinal partitions slabs terminating about 40cm above floor line and grating as specified and directed.

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends ,complete all as specified and directed.

Supply and fixing in repairs health faucet suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ,complete all as specified and directed.

Supply and fixing in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

Supply and fixing in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long, complete all as specified and directed.

Supply and fixing in repair 15mm bore Bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing in repair Bib tap 15 mm bore long body standard of PTMT any colour high pressure screwed for iron pipe and fixed ,complete all as specified and directed.

Supply and fixing in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed, complete all as specified and directed.

Supply and fixing in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125 mm size, complete all as specified and directed.

Supply and fix for 32 mm Waste fittings/coupling, brass, chromium plated for sinks, washbasins, etc. with long screwed shanks and fly-nuts, complete all as specified and directed.

Supply and fix for 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union,complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges ,complete all as specified and directed.

Supply and fixing in repair soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Supply and fixing in repair glass corner shelf of suitable size made of 5mm thick toughned, complete all as specified and as directed.

Supply and fix in repair glass shelf assembly consisting of 5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed.

Supply and fixing in repair of size 600mm X 450 mm fancy looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed.

Supply & fix in repair 20 mm size PTMT ball valves, high pressure with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of any bore & in any position, complete all as specified and directed.

Supply and fixing in repair 75 mm bore PVC (SWR) pipe pressure 4Kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches or in floors, complete all as specified and directed.

Supply and fixing in repair 110 mm bore PVC (SWR) pipe pressure 4Kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches, complete all as specified and directed.

Supply and fixing in repair 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Supply and fixing in repair 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Supply and fixing in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal ,complete all as specified and directed.

Supply and fixing in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fixing in repair PVC nahani trap 75 mm size, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4), complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-1.5 mm thick wall care putty finish wall surface even & smooth, complete all as specified and directed.

Material and labour for preparation of newly plastered surface of ceilings and applying three coats of white wash on ceilings, off sets, pillar etc,complete all as directed and specified.

Material and labour for complete removal of existing treatment to wall and applying one coat of wall putty 1mm thick (internal or external ) on walls internal or external surfaces in any height complete all as specified and directed.

Material and labour for applying two coats of oil bound distemper on internal wall putty surfaces complete all as specified and directed.

Material and labour for preparation of old wall surface and applying one coat of distemper oil emulsion finish wall surface even & smooth,complete all as specified and directed.

Material and labour for preparation of old wall surface and applying two coats of distemper oil emulsion finish wall surface even & smooth,complete all as specified and directed.

Material and labour for preparation of old ceiling surface and applying two coats of white wash on ceiling, off sets, pillar etc,complete all as directed and specified.

Material and labour for two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and directed.

Material and labour preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint, complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces, complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces, complete all as specified and directed.

Material and labour for preparation of old surface of wall and applying two coats of cement based paint of finish wall surface even and smooth, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed.

Supply and fix for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, A2-150 fixed with self tapping screws ,complete all as specified and as directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, A2-150 fixed with self tapping screws, complete all as specified & directed.

Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A ,complete all as specified and directed.

Supply and fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding, drilling hole, complete all as specified and directed.

Supply and fixing in repair Mild steel, plain, black sheet havin 1.25 mm thick in wall cladding, steel gates in hearths; covering to door shutters; covering to door chowkats frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc. with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and all as specifed and directed.

Supply and fix galvanised iron sheet 1.2mm thick cut in circular shapes of size 450mm dia and bent to the shape of cover of PVC overhead tank with edges turned. Spikes made of 1.2mm thick GI sheet cut in triangular shape with sharp edge 50mmx25mm size bent and fixed to circular sheet with rivets at 100mm c/c spacing bothways. The sheet with spikes shall be fitted to overhead tank with 4 Nos self tightening screws complete all as specified and directed.

Material and labour for taking down of existing sunken slab treatment from the sunken portion (Area n.exc 2 Sqm) and cleaning the surfaces washing down with water and rubbish of the premises, cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00Kg/Sqm and gouting 25mm thick cement concrete type B-0 (1:2:4) (using12.5mm graded stone aggregate) on sunken slab portion and finishing the top surfaces even and smooth without using extra cement . (b) Material and labour for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidifin 2K manufactured by M/S Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (15mm thick CM 1:3 alongwith liquid water proofing compound approved make) on top surfaces of sunken slab after preparations as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufactures instructions, complete all as specified and directed.

Demolition and breaking up 150 mm bore drain pipes, soil, waste and rain water pipes etc (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, in trenches or floors, including connections and fittings complete all as specified and directed.

Material and labour for 200mm NB HDPE DWC pipe of black colour suitable for sewer flow and confiriming to IS 14333- complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains of 150 mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Material and labour for cleaning/clearing of blocked under ground sewage lines of any bore, any description and in any position, Any depth, by taking out loose sediment sand, grit, ash, sludge, rags, fibres, vegetation etc by rodding/ any mechanical means, from one manhole to next manhole and washing throughout with fresh water including removing all sludge from the sewage lines in covered vans, trolley and disposed off properly outside the MD land upto the entire satisfaction of engineer in charge complete all as specified and directed

Material and labour for opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or any other manual/mechanical means upto Ist manhole complete all as directed.

Cleaning of manhole of any description & size, any depth including lifting up and removing sludge and any other foreign material with vehicle mounted sludge sucker and washing down with water for smooth functioning of sewage line upto the entire satisfaction of engineer in charge complete all as specified and directed. Note:- Sludge obtained from cleaning shall be removed and disposed off properly outside MD Land

Material and labour for plain, solid, first class Hard Wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied complete all as specified and directed.

Supply and fix 30mm thick first class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats 1st class Hard Wood thickness 30 mm complete all as specified and directed.

Material and labour for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filter on new works with two or more coats complete all as specified and directed.

Material and labour for french polishing one or more coat on old polished wooden surface of any description including cleaning and preparing of surface complete all as specified and directed.

Supply and fixing in repairs internal fittings Kit complete for vitreous china flush cistern with twin flush of Make -: CERA Cat Part No - 2115, 2235 or equivalent of make given in Appx 'B' as approved by GE.

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulaor, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 131.00 here-in- above but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS, with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction box of thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: -

One light point, controlled by one way switch, complete all as specified and directed.

One fan point, controlled by one way switch through regulator, complete all as specified and directed.

One bell point, controlled by bell push switch, complete all as specified and directed.

One three pin 5 Amp socket on same board with other switches, complete all as specified and directed.

One three pin 5 Amp socket on independent board, complete all as specified and directed.

Description all as per Item No 132.00 mentioned here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and directed.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Material and labour for sub main wiring using approved colour coding as per IS, with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.

2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and directed.

2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.

Supply and fix switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.

Supply and fix socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

Supply and fix bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fix calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.

Supply and fix lamp holder polycarbonate insulated body, with back plate suitable for batten fitting complete all as specified and directed.

Supply and fix stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix LED Bulk head light fitting 10 Watt capacity die cast alluminum including surface mounted, with decorative oval diffuser comprrising of high brightness LEDs complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and directed.

Supply and fix distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCB shall be of same make.

Supply and fix distribution board SPN 12 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCB shall be of same make.

Supply and fix distribution board Triple pole and neutral double door 415 Volt 4 way DBs IP-43 suitable for 160 Amps rated bus bar including connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCBs complete all as specified and directed. Note:- DB and MCB shall be of same make.

Supply and fix distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as iincluding connection with suitable size copper lugs/thimbles/glands including taking down existing unserviciable DBs including MCCBs complete all as specified and directed.. Note:- DB and MCCB/MCB shall be of same make.

Supply and fix MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB single pole and neutral 240 volt 10 KA 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Supply and fix MCB TPN 415 volt 10 KA 63 Amp 'C' series conforming to ISI marked including connection with suitable size copper lugs complete all as specified and directed.

Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00mm dia by means of bolts, nuts, Check nuts and washers of galvanised iron and thimbles and other end of the earth wire all as shown in electrical plate No 3 of MES Schedule Part-I (2009) connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board and protected by galvanized iron pipe medium 15 mm bore, and water pipe 20 mm bore GI light grade with funnel and wire mesh, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 75mm thick cover, reinforced with 8mm dia deformed or TMT bars 100mm C/C both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

Material and labour for laying, jointing and testing in replacement underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes: (a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately. (b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses. (c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.

10.0 Sqmm, 4 core, complete all as specified and directed.

16.0 Sqmm, 4 core, complete all as specified and directed.

25.0 Sqmm, 4 core, complete all as specified and directed.

Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etc and getting out complete all as directed.

Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed.

Material and labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed.

Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed.

NOTE:- Amount of credit of Rs. 109227.00 for retrieved materials is mentioned in Schedule of Credit Page No 36 & 37 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Please Enable Macros to View BoQ information