Improvement of Haripar Ranuja Road (NP) Ch. 0/00 to 3/00 of Kalavad taluka Under SCSP MMGSY Yojna Package No. JAM/ SCSP / MMSGY/RS/2026-27/P-01

Name of Work:- Improvement of Haripar Ranuja Road (NP) Ch. 0/00 to 3/00 of Kalavad taluka

Under SCSP MMGSY Yojna Package No. JAM/ SCSP / MMSGY/RS/2026-27/P-01

Taluka : Kalavad. Dist: Jamnagar.

BILL OF QUANTITIES

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

1 Clearing and Grubbing road land including 0.70 Ha. 28455.09

uprooting rank vegetation grass bushes

shrubs, spalning and trees girth up to

mm removal of stumps of treess cut earlier

and disposal of unserviceable material (C)

By mechanical means in area of light

2 Earthwork for embankment including 1330.00 Cum. 167.58

breaking clods, dressing with all leads and

lifts (excluding watering and

consolidation) (A) From Borrow area

within all lead.

3 Rolling and watering of earthwork in layer 1330.00 Cum. 23.17

with vibratory roller 8-10 tonne including

filling in depressions which occur during

4 Scarifying graveled macadam or bitumen 10125.00 Sqm. 42.59

macadam surface 6cm to 10cm depth

including stacking useful materials on road

size and disposing off remaining stuff.

5 Providing, laying, spreading and 1013.00 Cum. 933.24

compacting graded stone aggregate to

wet mix macadam as per MORTH

specification including premixing the

material with water at OMC in mechanical

mixer Plant, carriage of mixed material by

tipper to site, laying in uniform layers with

Paver finisher in sub-base/base course on

a well prepared sub-base and compacting

with vibratory roller to achieve the desired

density etc comp.

6 Providing and applying hincol made or 10125.00 Sqm. 98.98

eqvivalent grade priming coat with

emulsion (SS-1) at the rate of 7.50 kg/

Sqm including cost of emulsion and

preparing the surface, heating, and

applying etc. complete.

1 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

7 Providing, laying and rolling of 50mm 1252.00 MT. 4037.98

compacted thick B.M. in one layer with

B.T. aggregate as specified and using

bitumen VG-30 for tack coat at the rate of

2.50 Kg/ 10 Sqm and using bitumen VG-30

for mixing with aggregate at the rate of

3.5% i.e. 35Kg / MT of total mix including

heating and mixing in drum mix plant, and

transporting and spreading the same by

paver finisher and consolidation with

vibratory roller 80 to 100 KN static weight

including necessary firewood, oil,

lubricants, labour charges, using

contractor's own drum mix plant,

machineries and requirement, tool etc.

completed in accordance with the

requirement of specification.

8 Providing & laying Mix Seal Surface 20mm 511.00 MT. 4972.23

thick with B.T. aggregate as specified and

bitumen VG-30 for mixing with aggregate

at rate of 5.09% I.e. 50.90 Kg /MT of total

mix including heating and mixing in drum

mix plant and spreading the same by paver

finisher and consolidation with vibratory

roller 80 to 100 KN static weight including

necessary firewood, oil, lubricants, labour

charges, using contractors own drum mix

plant, machineries and equipment, tools

etc. complete in accordance with the

requirement of specification.

9 Providing and fixing ordinary kilometer 3.00 No. 704.33

stone of precast C.C. 1:2:4 including

necessary reinforcement as per I.R.C. type

design fixing in C.C. 1:4:8 including

lettering and painting etc. complete.

10 Providing and fixing Hectometer stone as 12.00 No. 356.49

per I.R.C. type design including lettering

and painting etc. complete. (I) Fixing in

11 Providing and fixing Guard Stone as per 200.00 No. 106.01

I.R.C. type design including white washing

etc. complete. Fixing in Earth.

12 Providing and fixing Indicator Stone of 135.00 No. 102.84

approved stone as per I.R.C. type design

including white washing etc. complete.

Fixing in Earth.

2 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

13 Direction (Junction) Sign :-Providing and fixing 2.00 No. 21287.50

sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size

244x122 cms. rectangular as per design of IRC-

67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long

stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame

fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy

coatings in black and white bends. The details

of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation,

curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third party

test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting.

14 Sign board per Square Meter :-Providing and 10.00 No. 7894.01

fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel);

size 1 meter x 1meter as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4 mtr long stand post

(2 Nos.) of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame

fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy

coatings in black and white bends. the details

of symbol or inscription / numerals for each

board shall be as per the instruction of

engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting

3 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

15 Village name Sign :-Providing and fixing sign 2.00 No. 6397.43

boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size

90x60 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3mtr long stand post

of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in

black and white bends. the details of symbol or

inscription / numerals for each board shall be

as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty

for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of

3 year outdoor exposure test report from third

party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

16 Hazard Marker Sign :-Providing and fixing sign 4.00 No. 3518.68

boards made out of 2.0 mm aluminium sheet /

mm ACP (Aluminum composite Panel); size

90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post

of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in

black and white bends. The details of symbol

for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product

offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting

4 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

17 Providing and fixing of typical MMGSY informatory 2.00 No. 8769.60

sign board with logo as per MORD specifications and

drawing . Three MS Plates of 1.6 mm thick , top and

middle plate duly welded with MS flat iron 25 x 5mm

size on back on edges. The lower plate will be

welded with MS angle iron frame of 25mm x 25mm.

The Angle iron frame of the lower most plate and flat

iron frame of middle plate will be welded 2 nos.

75mm x 75mm of 12 SWG sheet tubes posts duly

embedded in cement concrete M-15 grade block of

450mm x 450mm x 600mm, 600mm below ground

level. The top most dimond plate will be welded to

middle plate by 47mm x 47mm of 12 SWG steel plate

tube. All M.S. will be stove enameled on both sides.

Lettering and printing arrows, border etc. will be

painted with ready mixed synthetic enamel paint of

superior quality in reqired shade and colour. All

sections of framed posts and steel tubes will be

painted with primer and two coats of epoxy pains as

per drawing Clause 1701 and Annexure 1700.1.

18 MMGSY Logo Board:- Providing and fixing 3.00 No. 4545.00

MMGSY Logo Board made out of 2mm

aluminium sheet, as per the drawing & design.

Pre treated with phospheting process and acid

etching coated with one coat of epoxy primer

and two coat of best quality epoxy paint,

refloctrorized with retro reflective sheeting as

per the latest M.O.S.T. specification, 3.1 Mt.

long stand post and frame fabricated from

suitable size iron angle of 35 x 35 x 3 mm, 75 x

75 x 6 mm as required painted with best quality

epoxy coatings in black and white bends. The

details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC block of size 45 x

x 60 cms for each leg, including excavation

curing etc. complete under the supervision of

Engineer-In-Charge (A) Class-B Type-4 Retro

Reflective sheeting.

19 Road marking with hot applied thermoplastic 640.00 Sqm. 367.72

paints with reflectorising glass beads on

bitumin surface providing and laying a hot

applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms

per sqm area, thickness of 2.5mm is excluding

of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform

and free from streaks and holes. zebra patta

/bump patta lane/center line/ edge line/cut

patta. The white color marking should provide

liminance coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road shall be

min 100 mcd/m2/lux during the service life

during the day time.The marking should meet

the performance criteria for night time

reflectivity, wet reflectivity and skid resistance

as mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be

5 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

20 Cat Eye / Road Stud / RPM: Supplying Raised 334.00 No. 326.23

Pavement Markers made of polycarbonate and

ABS moulded body and reflective panels with

Micro prismatic lens (No Glass bead lens)

capable of providing total internal reflection of

the light entering the lens face and shall

support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 Ð DO

III Dt 11.06. 1997. The height, width and length

shall not exceed 20 mm, 130 mm and 130 mm

and with minimum reflective area of 13 Sqcm

on each side and the slope to the base shall be

35 +/- 5 degree. The body of the marker should

having finger grip for easy and accurate

placement and application with epoxy /

bituminous Adhesive as recommended by the

manufacturer of the marker. The color of the

marker should be as per the IRC 35-2015 and

as directed by Engineer-in-charge.

21 Chevron sign :-Providing and fixing sign boards 15.00 No. 3711.75

made out of 1.5mm aluminium sheet / 3mm ACP

(Aluminum composite Panel); size 60x50cm

rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid

etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post

of Iron Angle 75 x 75 x 6mm / 65NB Circular MS

Pipe as required and frame fabricated from

suitable size iron angle of35x35x3mm; painted

with bestquality epoxy coatings in black and

white bends. the details of symbol or

inscription / numerals for each board shall be

as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty

for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of

3 year outdoor exposure test report from third

party test lab for the product offered shall be

submitted by contractor. (A) Class-B Type-4

Retro Reflective sheeting

6 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

22 Informatory Signs : Providing and fixing sing 2.00 No. 3856.89

boards made out of 2mm aluminium sheet; size

80 x 60cms. rectangle as per the design of IRC-

67-1977 pre treated with phospheting process

& acid teching; coated with one coat of

epoxyprimer and two coats of best

qualityepoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand postand frame

fabricated from suitable sizeiron angle of 35 x

35 x 3mm75x75x6mm as required; painted with

best qualityepoxy coatings in black and

whitebends. the details of symbol for

eachboard shall details of symbol for

eachboard shall be as per the instruction

ofengineer in charge. The fixing at site shall be

in 1:2:4 CC block of size 45 x45 x 60cms. for

each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent

[should be written in figures and words] of the estimated rates mantioned above. Amount of my/our tender

works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat (R & B) Division

Kalavad. Jamnagar.

7 of 8 DTP of MMGSY P-01 07-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

1 All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

2 All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site (prior commencement of work and at its close ) in

all respects and hold good for work under all conditions, site, moisture, weather etc.

4 The contractor shall exhibit the board at site of work with the details of works, Tender

amount and specification as per Govt. Circular No. BBG / 3277 / 1657 / N, Dt.26-4-78 and

as per G.R.No. TNC -1090-24-C, Dt.18-11-91, as directed by Engineer-in-charge of the

works, exhibit board at site of work, for which contractor is not entitiled for any extra

5 Contractor shall even " NIL " percentage, if no deduction is offered.

6 One percent of work done amount of this work shall be recovered from the contractor

payment as " Labour Cess " in terms of the Guajarat Govt. gazette extra ordinary dt.

12/12/2004 implementation of building and other construction works.(Regulation of

employment & condition of service act

7 Testing of materials shall be as per statement attched for quality control. The material

shall be tested in GERI bill for the testing charge shall be paid by the Department and 1 %

(One percent) of amount put to tender after deduction of cost of material as per scheule-

A shall be recovered from the contractor's running Bill as per GR of R.& B. Dept. No.TNC

/ 1085 / 4 / C Dt. 20-12-91 & modified R.& B. Dept. Circular No.SSR / 10000092-IB-12910-C

Signature of Contractor :

Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat ( R & B ) Division,

Kalavad. Jamnagar

8 of 8 DTP of MMGSY P-01 07-26.xls