Complete engine overhauling and other allied jobs to departmental mobile workshop van No. JK07-0639 and engine overhauling of 25KVA D.G set installed on the workshop van.

Amount

Mobile workshop van No. JK07-0639

Engine and self starter: Complete overhauling of Engine of the vehicle by Way of dismantling of the engine from the chassis, dismantling of all the spares and complete servicing of the engine block and the spares with diesel / kerosene etc. Providing / fitting of piston set – 01 set, Ring set- 01 set, liner set – 01 set, over hauling gasket set – 01 set, valve set inlet / outlet -01 set, valve seat – 01 set, valve guide – 01 set, valve seal -01 set, engine sleeve, thrust washer-1set, oil seal set main and timing seal -1 set, Main and began bearing set -01 set, side piston ring set-01 set, C.R bush set-01 set, Engine oil 15 litre, oil filter, diesel filter set, air filter, dhoti Cloths, bond tubes as per requirement. The job includes boring jobs on lathe machine and head repairing etc. The job also includes P/F of self starter assembly / dynamo / alternator repair by way of replacing all worn out spares viz, self bendix, armature, coil, brushes, bearing, cut-out solenoid switch etc complete in all respect. (Complete job including labour charges, GST etc).

F. I. Pump. Complete overhauling of Fuel injection pump and Nozzles by way of Providing / fitting of F.I. Pump Overhauling kit complete set. (Complete job including labour charges, GST etc).

Four wheel and Suspension: Complete four wheel checking of the vehicle by way of P/F of wheel bearing front -02No, oil seal front -02 No, Wheel bearing rear -02No, oil seal rear (inner/outer) -04No, break shoe with nuts- 02 set, Mukhi washer F/R -04No , lock washer F/R -04No, wheel cylinder as per requirement, Grease-05KG, dhoti cloth, kerosene oil for washing, tie rod kit -01set, drag line kit -01set, king pin -02 No, king pin kits, king pin bush, break oil etc including Lathe job for king pin etc. The job includes replacement of brake servo of the vehicle. The job also includes complete checking of suspension system by way of re-tensioning / assembling of leaf springs (Front/Rear) complete, replacement of broken leaf springs and addition of extra new leaf springs-02 Nos on each side or as per requirement and p/f of shock absorbers, bushes, washers, cotter pins, shackle pins etc as per requirement. (Complete job including labour charges, GST etc)

Turbo charger: Providing and Fitting of Turbo charger assembly. (Complete job including labour charges, GST etc)

Clutch and Gear box: Repair to clutch system by way of providing and fitting of Clutch plate -01 No, Pressure plate-01 No, release bearing-01 No, clutch fork-01 No, clutch cylinders, clutch fluid-01 Litre, and dhoti clothes etc. The job also includes Complete gear box checking and repair/replacement of worn out gears, shafts, pins, gaskets, rings shims, kits set, bound tube etc and providing of gear oil-07 litre. (Complete job including labour charges, GST etc). (Complete job including labour charges, GST etc).

Welding, patching and Wiring: Repairing of seats by way of gas / electric welding to the broken frame and providing and fitting of thick Dunlop for Driver seat, Co-driver seat, Box type seat and back rest seat also covered with superior quality of Rexin cloth. The job includes Patching of cabin, adjacent parts and body of vehicle by way of gas welding and supporting plates wherever required. The job also includes repair / replacement of wiring system of vehicle by way of p/f of LT wire as per requirement, side indicators -02 Nos, head light assembly-02 Nos, brake light assembly-02 Nos, wiper blade set -01 set etc. (Complete job including labour charges, GST etc).

Painting: Complete painting of the vehicle by way of scratching the old and existing paint of the exterior body and bonnet by rubbing with sand paper, applying red oxide primer to the body and bonnet and then applying blue enamel of superior quality in two codes to the whole body and bonnet. The job includes writing of the department name on the sides and front top of the vehicle in conspicuous font including labour charges. (Complete job including labour charges, GST etc).

25 KVA D.G set

Engine and self starter: Complete overhauling of Engine of the vehicle by Way of dismantling of the engine from the chassis, dismantling of all the spares and complete servicing of the engine block and the spares with diesel / kerosene etc. Providing / fitting of piston set – 01 set, Ring set- 01 set, liner set – 01 set, over hauling gasket set – 01 set, valve set inlet / outlet -01 set, valve seat – 01 set, valve guide – 01 set, valve seal -01 set, engine sleeve, thrust washer-1set, oil seal set main and timing seal -1 set, Main and began bearing set -01 set, side piston ring set-01 set, C.R bush set-01 set, Engine oil 15 litre, oil filter, diesel filter set, dhoti Cloths, bond tubes as per requirement. The job includes boring jobs on lathe machine and head repairing etc. The job also includes P/F of self starter assembly / alternator repair complete in all respect. (Complete job including labour charges, GST etc).

F. I. Pump. Complete overhauling of Fuel injection pump and Nozzles by way of Providing / fitting of F.I. Pump Overhauling kit complete set. (Complete job including labour charges, GST etc)

M/S DASS PA ENTERPRISES (BID ID -134281)