Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAdmitted-Finance | ₹26.0 L | L1 | Admitted-Finance |
| 2 | L2₹27.6 LAdmitted-Finance | ₹27.6 L | L2 | Admitted-Finance |
| 3 | L3₹28.3 LAdmitted-Finance | ₹28.3 L | L3 | Admitted-Finance |
| 4 | Rejected-Technical 3 333 F M P ARCS VENGACHUVAD VAZHAKULAM P O MUVATTUPUZHA ERNAKULAM KERALA 686670 | MUVATTUPUZHA | ERNAKULAM | KERALA | 686670 | - | - | Rejected-Technical Party failed to submit Solvency certificate in line with PQC. |
| Sl No | Description | Qty | Unit | GERESH ELECTRICALS PRIVATE LIMITED L2 | Dinu Electricals L3 | M/s Stackvolt Engineers L1 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling and transportation of existing 11kV panels: The scope of work includes rack out bulk oil circuit breakers from panels, properly marking and disconnecting power cables/ control cables/earth cables/motor heater cables of panels, disconnecting inter panel power/earth bus bars, disconnecting inter panel control wirings, removing inter panel mechanical connections, removing foundation bolts from MS channels/MS plate/concrete floor, removing foundation channels if necessary, transporting the panels/foundation channels/foundation plate and circuit breakers from first floor of Central substation to a temporary location as directed by the Engineer-in charge, removal and hand over of valuable items like bus bars/relays/meters/indications lamps from the old panel, draining oil in circuit breakers to oil drums, taking weighment of scrap items and transportation of scrap items to scrap yard. All removed items shall be handed over to Technician-in-charge. The contractor shall arrange necessary tarpaulin sheets to protect the panel from dust and rain till completion of removal of valuable items. The crane, lorry, lifting tackles, etc., required for handling and transportation of switchboard panels and scrap items from work site to scrap yard shall be arranged by the contractor. Oil drums for draining oil from the breaker will be supplied by FACT. Approximate dimensions of existing Switchboard is Length-13320mm, Width-2200mm, Height-2480mm. | 21 | NO | 18,000 ₹3.8 L | 6,000 ₹1.3 L | 15,000 ₹3.1 L |
| 2.00 | Transportation and erection of new 11kV panels: The scope of work includes loading/unloading, transportation of new 11kV panels from stores to Central Substation building first floor without causing any damage to the panels, handling at site, unpacking, checking of components of supply equipment/items as per BOM, listing and handing over of list of short supplied items to Technician-in-charge, concrete cutting/chipping of floor for cable entry/fixing foundation channels, drilling foundation bolt holes in the MS channels/ MS plate/ concrete, leveling the foundation floor for placing the new panels, grouting, fixing the panels on the foundation MS channels/ MS plate/ concrete, aligning all panels properly, tightening the foundation bolts, inter-connecting all panels, inter-linking power and earth bus bars, checking positioning/alignment and tightness of bus bars. The main bus bars shall be tightened using torque controlled wrenches at the recommended torque by the panel manufacturer. Anchor bolt of minimum size 10mm required for fixing the switchboard as per GA drawing shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of switchboard panels from stores to Central Substation building first floor shall be arranged by the contractor. General Arrangement Drawing of new switchboard is attached as Annexure-2. | 24 | NO | 25,800 ₹6.2 L | 16,000 ₹3.8 L | 40,500 ₹9.7 L |
| 3.00 | Laying/Re-routing of existing 11 kV, armoured cables: The scope of work includes Laying/Re-routing of existing 11 kV, armoured cables of size up to 3Cx400 sq.mm in a single panel through cable trenches, risers, walls and clamping/tying the cables at a regular interval of 500 mm. All items required for the work shall be arranged by the contractor. Number of cables in a single panel board is attached as Annexure-1. | 21 | NO | 2,500 ₹52,500 | 8,000 ₹1.7 L | 400 ₹8,400 |
| 4.00 | Laying/Re-routing of existing LT, armoured cables: The scope of work includes Laying/Re-routing of existing LT, armoured cables of size up to 19 core, 2.5/4 Sq.mm in a single panel through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. All items required for the work shall be arranged by the contractor. Number of cables in a single panel board is attached as Annexure-1. | 21 | NO | 1,250 ₹26,250 | 6,000 ₹1.3 L | 300 ₹6,300 |
| 5.00 | Laying/Re-routing of existing earth cables: The scope of work includes Laying/Re-routing of existing armoured earth cables of size up to 1Cx600 Sq.mm through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. All items required for the work shall be arranged by the contractor. | 150 | M | 50 ₹7,500 | 120 ₹18,000 | 45 ₹6,750 |
| 6.00 | Supply of Flexible 1Cx25Sq.mm copper cable: The scope of work includes supply of 1Cx25Sq.mm, 1100 Volt grade, PVC insulated, unarmoured, flexible cable with bright annealed, multi-stranded, bare copper conductor conforming to IS 694 Part I of 64, with latest amendments. Acceptable makes for cable: Finolex/ Havells/ KEC/ KEI/ Polycab/ RR Kabel/Universal/ Gloster /V-Guard. | 100 | M | 425 ₹42,500 | 450 ₹45,000 | 280 ₹28,000 |
| 7.00 | Supply of Armoured 3Cx6Sq.mm copper cable: The scope of work includes supply of 3Cx6Sq.mm, 650/1100 Volt grade, PVC/XLPE Insulated, PVC Sheathed (FRLS),Galvanized Round / Flat Steel Armoured Cable conforming to IS 1554/Part I of 1988 or IS 7098 Part I, with latest amendments and with Cable length & ISI marking, to be marked on every 5 Meters on the outer Sheath of the Cable. Acceptable makes for cable: Finolex/ Havells/ KEC/ KEI/ Polycab/ RR Kabel/Universal/ Gloster /V-Guard. | 250 | M | 485 ₹1.2 L | 400 ₹1 L | 280 ₹70,000 |
| 8.00 | Laying new 11 kV, 3Cx400 sq.mm armoured cable: The scope of work includes loading/unloading, transporting new 11 kV, 3Cx400 sq.mm armoured cables from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor. | 300 | M | 125 ₹37,500 | 140 ₹42,000 | 120 ₹36,000 |
| 9.00 | Laying new 11 kV, 3Cx300 sq. mm armoured cable: The scope of work includes loading/unloading, transporting new 11 kV, 3Cx300 sq.mm armoured cables from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor. | 300 | M | 125 ₹37,500 | 140 ₹42,000 | 85 ₹25,500 |
| 10.00 | Laying new LT, armoured cables: The scope of work includes loading/unloading, transporting armoured, LT cables of size up to 19 core, 2.5/4/6 Sq.mm from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor. | 500 | M | 35 ₹17,500 | 60 ₹30,000 | 48 ₹24,000 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹65,000
Closing Date
11 Mar 2026, 11:00 amClosed
SM(Mat)C
Corporate Materials, PD Administration Building, FACT - Udyogamandal, Kochi, Kerala
Erection and Commissioning of 11 kV Switchboard at Central Substation of FACT CD, Ambalamedu, as per tender conditions.
2026_FACT_899735_1
04026/2025-2026/E33148
Open Tender
Miscellaneous Works
25 days
FACT - Cochin Division
Please refer tender documents
7 documents required · 7 mandatory
₹0
₹65,000
Yes
1 Apr 2026
21 Feb 2026
12 Mar 2026
21 Feb 2026
11 Mar 2026
21 Feb 2026
Dismantling and transportation of existing 11kV panels: The scope of work includes rack out bulk oil circuit breakers from panels, properly marking and disconnecting power cables/ control cables/earth cables/motor heater cables of panels, disconnecting inter panel power/earth bus bars, disconnecting inter panel control wirings, removing inter panel mechanical connections, removing foundation bolts from MS channels/MS plate/concrete floor, removing foundation channels if necessary, transporting the panels/foundation channels/foundation plate and circuit breakers from first floor of Central substation to a temporary location as directed by the Engineer-in charge, removal and hand over of valuable items like bus bars/relays/meters/indications lamps from the old panel, draining oil in circuit breakers to oil drums, taking weighment of scrap items and transportation of scrap items to scrap yard. All removed items shall be handed over to Technician-in-charge. The contractor shall arrange necessary tarpaulin sheets to protect the panel from dust and rain till completion of removal of valuable items. The crane, lorry, lifting tackles, etc., required for handling and transportation of switchboard panels and scrap items from work site to scrap yard shall be arranged by the contractor. Oil drums for draining oil from the breaker will be supplied by FACT. Approximate dimensions of existing Switchboard is Length-13320mm, Width-2200mm, Height-2480mm.
Transportation and erection of new 11kV panels: The scope of work includes loading/unloading, transportation of new 11kV panels from stores to Central Substation building first floor without causing any damage to the panels, handling at site, unpacking, checking of components of supply equipment/items as per BOM, listing and handing over of list of short supplied items to Technician-in-charge, concrete cutting/chipping of floor for cable entry/fixing foundation channels, drilling foundation bolt holes in the MS channels/ MS plate/ concrete, leveling the foundation floor for placing the new panels, grouting, fixing the panels on the foundation MS channels/ MS plate/ concrete, aligning all panels properly, tightening the foundation bolts, inter-connecting all panels, inter-linking power and earth bus bars, checking positioning/alignment and tightness of bus bars. The main bus bars shall be tightened using torque controlled wrenches at the recommended torque by the panel manufacturer. Anchor bolt of minimum size 10mm required for fixing the switchboard as per GA drawing shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of switchboard panels from stores to Central Substation building first floor shall be arranged by the contractor. General Arrangement Drawing of new switchboard is attached as Annexure-2.
Laying/Re-routing of existing 11 kV, armoured cables: The scope of work includes Laying/Re-routing of existing 11 kV, armoured cables of size up to 3Cx400 sq.mm in a single panel through cable trenches, risers, walls and clamping/tying the cables at a regular interval of 500 mm. All items required for the work shall be arranged by the contractor. Number of cables in a single panel board is attached as Annexure-1.
Laying/Re-routing of existing LT, armoured cables: The scope of work includes Laying/Re-routing of existing LT, armoured cables of size up to 19 core, 2.5/4 Sq.mm in a single panel through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. All items required for the work shall be arranged by the contractor. Number of cables in a single panel board is attached as Annexure-1.
Laying/Re-routing of existing earth cables: The scope of work includes Laying/Re-routing of existing armoured earth cables of size up to 1Cx600 Sq.mm through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. All items required for the work shall be arranged by the contractor.
Supply of Flexible 1Cx25Sq.mm copper cable: The scope of work includes supply of 1Cx25Sq.mm, 1100 Volt grade, PVC insulated, unarmoured, flexible cable with bright annealed, multi-stranded, bare copper conductor conforming to IS 694 Part I of 64, with latest amendments. Acceptable makes for cable: Finolex/ Havells/ KEC/ KEI/ Polycab/ RR Kabel/Universal/ Gloster /V-Guard.
Supply of Armoured 3Cx6Sq.mm copper cable: The scope of work includes supply of 3Cx6Sq.mm, 650/1100 Volt grade, PVC/XLPE Insulated, PVC Sheathed (FRLS),Galvanized Round / Flat Steel Armoured Cable conforming to IS 1554/Part I of 1988 or IS 7098 Part I, with latest amendments and with Cable length & ISI marking, to be marked on every 5 Meters on the outer Sheath of the Cable. Acceptable makes for cable: Finolex/ Havells/ KEC/ KEI/ Polycab/ RR Kabel/Universal/ Gloster /V-Guard.
Laying new 11 kV, 3Cx400 sq.mm armoured cable: The scope of work includes loading/unloading, transporting new 11 kV, 3Cx400 sq.mm armoured cables from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor.
Laying new 11 kV, 3Cx300 sq. mm armoured cable: The scope of work includes loading/unloading, transporting new 11 kV, 3Cx300 sq.mm armoured cables from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor.
Laying new LT, armoured cables: The scope of work includes loading/unloading, transporting armoured, LT cables of size up to 19 core, 2.5/4/6 Sq.mm from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor.
Laying new earth cables: The scope of work includes loading/unloading, transporting earth cables of size up to 1Cx600 Sq.mm from stores/cable yard to Central Substation, handling at site, laying through cable trenches, risers, walls and clamping/tying the cable at a regular interval of 500 mm. Cables shall be supplied by FACT. All other items required for the work shall be arranged by the contractor. The crane, lorry, lifting tackles, etc., required for handling and transportation of cables from stores/cable yard to Central Substation shall be arranged by the contractor.
Supply of straight joining kit suitable for 11 kV, 3x 400 sq. mm cable: The scope of work includes supply of heat shrinkable straight joining kit suitable for 11 kV, 3x 400 sq. mm armoured cable. Acceptable Makes: Raychem/ 3M/ Denson.
Supply of straight joining kit suitable for 11 kV, 3x 300 sq. mm cable: The scope of work includes supply of heat shrinkable straight joining kit suitable for 11 kV, 3x 300 sq. mm armoured cable. Acceptable Makes: Raychem/ 3M/ Denson.
Straight joining 11 kV, 3Cx400 sq.mm armoured cables: The scope of work includes carrying out straight joining of 11 kV, 3x400 sq.mm armoured cables using heat shrinkable type straight through joint kits supplied vide Sl.no.11 of this work schedule as per instruction of Engineer in Charge. All necessary tools required for the work shall be arranged by the contractor.
Straight joining 11 kV, 3x300 sq.mm armoured cables: The scope of work includes carrying out straight joining of 11 kV, 3x300 sq.mm armoured cables using heat shrinkable type straight through joint kits supplied vide Sl.no.12 of this work schedule as per instruction of Engineer in Charge. All necessary tools required for the work shall be arranged by the contractor.
Straight joining of LT, armoured cables: The scope of work includes carrying out straight joining of LT cables of size up to 19 core, 2.5/4 Sq.mm cables using compound/heat shrinkable type straight through joint kits as per instruction of Engineer in Charge. Straight Joint Kit and all necessary tools and items required for the work shall be arranged by the contractor. Acceptable Makes for straight through joining kit: Raychem/ 3M/ Denson.
Supply of end termination kit suitable for 11 kV, 3x 400 sq. mm cable: The scope of work includes supply of heat shrinkable indoor end termination kit suitable for 11 kV, 3x 400 sq. mm armoured cable. Acceptable Makes: Raychem/ 3M/ Denson.
Supply of end termination kit suitable for 11 kV, 3x 300 sq. mm cable: The scope of work includes supply of heat shrinkable indoor end termination kit suitable for 11 kV, 3x 300 sq. mm armoured cable. Acceptable Makes: Raychem/ 3M/ Denson.
Indoor end termination of 11 kV, 3Cx400 sq.mm armoured cables: The scope of work includes carrying out indoor end termination of 11 kV, XLPE/ PVC / PILC cables of size 3Cx400 sq.mm using heat shrinkable end termination kit supplied vide Sl.no.16 of this work schedule as per instruction of Engineer in Charge. Cables shall be properly clamped to the supporting MS angle.
Indoor end termination of 11 kV, 3Cx300 sq.mm armoured cables: The scope of work includes carrying out indoor end termination of 11 kV, XLPE/ PVC / PILC cables of size 3Cx300 sq.mm using heat shrinkable end termination kit supplied vide Sl.no.17 of this work schedule as per instruction of Engineer in Charge. Cables shall be properly clamped to the supporting MS angle.
Termination of armoured, LT cables of size up to 19 core, 2.5/4/6 Sq.mm of size: The scope of work includes providing holes at gland plate, concrete chipping/cutting, making holes in concrete if required, carrying out glanding and termination of armoured, LT cables of size up to 19 core, 2.5/4/6 Sq.mm of size using proper glands and lugs as per the 'as built drawing' submitted by the panel manufacturer. Ferrules shall be provided in the wires. Ferrule printing machine shall be arranged by the contractor. Cable lugs, suitable gland and all other items required for the work shall be arranged by the contractor. Cables for inter-panel is excluded from this work.
Inter-panel wiring: The scope of work includes laying, wiring, glanding, termination and testing of control cables for DC Aux. supply, AC PT supply, Trip status to common annunciator, interlocks etc. in a single panel of newly erected 11kV panel using proper glands and lugs as per the 'as built drawing' and 'inter-panel wiring diagram' submitted by the panel manufacturer. Ferrules shall be provided in the wires. Ferrule printing machine shall be arranged by the contractor. Cables will be supplied by FACT. Cable lugs and all other items required for the work shall be arranged by the contractor.
Supply of MS angle 50x50x8mm: The scope of work includes supply of M.S. Equal Angle (ISA) of size 50x50x8mm as per IS:2062.
Supply of MS flat 30x6mm: The scope of work includes supply of M.S. flat of size 30x6mm as per IS:2062.
Fabrication, painting and erection of cable supports and ladder type cable tray: The scope of work includes fabrication and erection of cable supports for each panel to clamp the power cables, and cable tray of size up to 1000mm using MS angle 50x50x8mm supplied vide Sl.no.22 and MS flat 50x8mm supplied vide Sl.no. 23. Loading/unloading, transportation and safe custody etc. is in contractor’s scope. The fabricated cable rack supports shall be welded to the structures/ insert plates at various levels of the substation building. The contractor shall provide sufficient anchor bolt of size not less than 12 X 100 mm at an interval of 1 meter for fixing the cable tray support if structures/insert plates are not present. Vendor shall arrange welding rod and cutting gas required for the work. The work shall be carried out as per the instructions of the Electrical Engineer -in-charge. All fabricated items shall be painted with two coats of anti-corrosive epoxy paint (grey colour) over two coats of suitable primer.
Supply and installation of Rubber Mat: The scope of work includes supply and installation of Electrical insulating, 11kV grade, Conforming to IS 15652:2006, with the following specifications: Colour: Black Class: B (11kV Grade) Length: 2000mm, Width : 1000mm Thickness: 2.5mm + / -10%
Supply and installation of danger board and safety gloves: The scope of work includes supply of 11KV danger board- 2 no. and 2 pair of Electrical Safety Hand Gloves with following specifications: Applicable Standards: IS 4770:1991/ IEC 60903:2014 / BS EN 60903:2003 with latest amendments. Construction: Seamless Type, Soft and Flexible.
Site testing: The scope of work includes measuring conductor resistance and taking insulation resistance after completing the installation of each sections of the switchboard. Insulation resistance shall be measured at 5000V. Conductor resistance shall be measured using micro-ohm meter. All measuring instruments required for the work shall be arranged by the contractor and test report shall be submitted.
Liaisoning work: The scope of work includes preparation of documents required for obtaining approval from CEA and liaisoning with CEA inspection.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Unpricedbid.pdf
Tender Documents • 0.11 MB
Compliancestatement.pdf
Tender Documents • 0.28 MB
BOQ_945724.xls
BOQ • 0.29 MB
Tenderdoc.pdf
Tender Documents • 8.68 MB
Download all tender documents and submit your bid