Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹99,202.85Admitted-Fee/PreQual/Technical/Finance | ₹99,202.85 | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹1.0 L+₹4,263.60 (4.30%)Admitted-Fee/PreQual/Technical/Finance | ₹1.0 L+₹4,263.60 (4.30%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | RAJEEVAN PTK L1 | Vamithra Infrastructure Private Limited L2 |
|---|---|---|---|---|---|
| 1.00sheet work | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.14 | cum | 297.7 ₹40.19 Lowest | 310.58 ₹41.93 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.14 | cum | 7,643.55 ₹1,031.88 Lowest | 7,974.4 ₹1,076.54 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 209.91 | kg | 160.77 ₹33,747.23 Lowest | 167.73 ₹35,208.2 |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 218.39 | kg | 147.66 ₹32,247.02 Lowest | 154.05 ₹33,642.52 |
| 1.00 | OD279704/2025-2026:Providing and fixing precoated galvanized iron profile sheets(size, shape, pitch of corrugation as approved by Engineer in charge 0.35 mm (+0.05%) total coated thickness with Zinc coating 120 gms per sqm as per IS -277 in 240 mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55 mm)with EPDM seat, complete up to any pitch in horizontal/ vertical curved surface, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 24.48 | sqm | 423.34 ₹10,363.36 Lowest | 441.66 ₹10,811.84 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 15.74 | sqm | 138.22 ₹2,176.14 Lowest | 142.34 ₹2,241 |
| 1.01 | OD353284/2025-2026:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | 109.2 | kg | 179.46 ₹19,597.03 Lowest | 187.22 ₹20,444.42 |
Tender Value
₹1.1 L
EMD Value
₹2,752
Closing Date
20 Aug 2026, 6:00 pmClosed
AKSHITHA GB
Assitant Engineer LID EW SECTION ERAMALA GP
Agricultural office storage centre sheet roofing Eramala Krishibavan
2026_LSGD_863775_6
01/2026/AE/LIDEW/EGP
Open Tender
Civil Works - Buildings
Item Rate
240 days
EramalaGP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹2,752
Yes
22 Aug 2026
5 Aug 2026
22 Aug 2026
5 Aug 2026
20 Aug 2026
5 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1sheet work | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1 | kg | - | - |
| 1.004 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 0.8 | kg | - | - |
| 1.005 | OD279704/2025-2026:Providing and fixing precoated galvanized iron profile sheets(size, shape, pitch of corrugation as approved by Engineer in charge 0.35 mm (+0.05%) total coated thickness with Zinc coating 120 gms per sqm as per IS -277 in 240 mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55 mm)with EPDM seat, complete up to any pitch in horizontal/ vertical curved surface, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.006 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1 | sqm | - | - |
| 1.007 | OD353284/2025-2026:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces | - | kg | - | - |
stage.html
html • 0.02 MB
finance_1461317.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1461317.xls
BOQ • 0.30 MB
agriprilmry.pdf
Tender Documents • 0.26 MB
agrifot.pdf
Tender Documents • 0.25 MB
agriafdvty.pdf
Tender Documents • 0.24 MB
agrisbd.pdf
Tender Documents • 0.98 MB
agriclcori.pdf
PDF • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .