Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC Q 49 NEAR DEOGHAR COLLEGE MAIN GATE PO PS DEOGHAR JH 814112 | DEOGHAR | DEOGHAR | JHARKHAND | 814112 | L1 | Accepted-AOC quoted amount is lowest and resonable | |
| 2 | L2₹16.1 L+₹38,429 (2.44%)Rejected-Finance GALI NO 4 GAUSHALA ROAD VIKASH NAGAR RAMGARH CANTT RAMGARH JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L2 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE | |
| 3 | L3₹16.8 L+₹1.1 L (6.80%)Rejected-Finance VIKASH NAGAR GAUSHALA RAMGARH CANTT 829122 RAMGARH JHARKHAND | RAMGARH | JHARKHAND | 829122 | L3 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE | |
| 4 | Rejected-Technical 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | - | Rejected-Technical Rejected due to not fulfill prequalifying criteria |
Tender Value
₹18.2 L
EMD Value
₹36,402
Closing Date
1 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
RAMGARH CANTT
SPL REP TO (ROOF ONLY) OF BLDG NO T EW 45 and T EW 45A JCOs MESS AND OFFR GUEST ROOM NO T-43/03 TEMPLE LANE AT RAMGARH CANTT
2023_MES_626595_1
8300/3205/E8
Open Tender
Civil Works
Item Rate
180 days
GE RAMGARH
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE RAMGARH
₹36,402
Yes
19 Jan 2024
3 Nov 2023
8 Dec 2023
3 Nov 2023
1 Dec 2023
17 Nov 2023
Amount
Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed
Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed
Taking shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge .
Dismantling wall and ceiling boarding, any description, fixed in any position with nails/screws complete all as specified and directed.
S & F for providing aluminium snap grid frame work for false ceiling system with size 605 mm x 605 mm, consisting of main runner of size 36.5 mm x 25 mm x 1.4 mm (weight not less than @ 0.24 Kg/Rm) and cross Tee of size 23.5 mm x 36.4 mm x 1.4 mm (weight not less than @ 0.191 Kg/Rm). The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40 mm X 25 mm X 2 mm (weight not less than @ 0.36 Kg/Rm).The snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia mild steel wire /GI wire, J-bolts ,nuts and washers as per manufacturer's instructions and complete all as specified and directed by Engr-in-Charge.
M & L for 4.0 mm thick Non asbestos fibre cement building boards fixed in ceiling flat or sloping fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed by Engr-in-Charge.
S & F aluminium sliding door bolts 300mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engineer-in-Charge .
S&F anodised aluminium, windows, ventilators shutters , fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium, snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1No.),100mm long hinges type B-21 (2Nos), suitable handle(02 Nos.) in each door top rail guide rail etc. complete all as specified and directed.
S & F in repair 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed.
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.
S &F powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators shutters(fixed/sliding track two or three track) and aluminium partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle, C.P. brass/ stainless steel screws, all complete all as specified and directed.
Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc complete all as specified & directed.
M&L for rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on fair face brick masonry/concrete surface etc in CM (1:4) surface finished even & smooth using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper(OBD) over a coat of alkali resistant primer and a layer of wall care putty (not less than 2.0 mm thick ) to make entire surface free from undulations complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.
M&L for Vetrified ceramic dark dhade /double charged floor tiles 10 mm thick (Square/rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over & including 20 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.
M&L for Vetrified ceramic dark dhade /double charged floor tiles 10 mm thick (Square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in dado/skirting etc., set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting / dado etc.,over & including 10 mm thick backing coat in cement mortar (1:4) etc, set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surface such as skirting / dado etc.,over & including 10 mm thick backing coat in cement mortar (1:4) etc, set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mm x 300 mm x7 mm thick ,as in vertical surface such as dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles over & including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed.
M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc.complete with & including brushing neat cement slurry (@ 3 Kg of cement per Sqm) for bonding of old concrete surface to new concrete, complete all as specified and as directed.
M&L for 18 mm to 20 mm thick machine cut granite slab (or any type) table rubbed and pre mirror polished in steps,jambs,pillar,window cill,cooking platforms and like in cement mortar1:4, set & jointed in neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,over & including 20 mm thick screed bed in cement mortar (1:4) etc complete all as specified & directed.
Demolition of plain cement concrete(un-reinforced ) in ground floors, terrazo tiles floor & paving not exceeding 15cm thickness (below or above ground level) and removal of rubbish off from site complete all as directed by Engineer-in-Charge.
M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to flooring/hard standing etc ,complete all as specified and directed.
S&F mild steel cupboard shutter with frame as Godrej pattern ,made out of 22 gauge mild steel sheet including chromium plated mild steel handle with proper locking arrangement (brass mortice lock vertical type size 65mm ,4 livers with escutcheon plates & two keys )with and including two coats of spray painting with synthethic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolts 150mm long grouted in brick wall /concrete including makng good the disturbed surface as original complete all as specified and directed by Engineer-in-Charge. Make of brass mortice lock - Godrej/ Harrison/ Link
S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge.
S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. mild steel framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing complete all as specified and as directed.
S & F 100mm size butt hinges medium weight cold rolled stainless steel (SS) complete all as specified and directed
S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.
S&F in repair for PVC connection 15 mm dia size with PTMT nuts of length 450 mm for wash hand basin & flushing cistern complete all as specified and directed.
S&F 18mm /19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination for cup board shutter ,shelf etc., fixed with screws & favicol where required as in cubical desk and cabinets including making holes with decorative covers for wires where ever required fixed to aluminum partition complete all as specified and directed.
S&F 30mm width of flaps (when open) continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel with brass polish,bright finish complete all as specified and directed
S&F ball catcher with 8mm dia steel ball and brass body and striking plate including letting and fixed complete all as specified and directed
M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window ,bed block ,filling & similar work etc. including necessary form work complete all as specified and directed
Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
Taking up or down steel tubing and connections of 25 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick walls and making good the surfacein cement mortar 1:3 complete all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick walls and making good the surfacein cement mortar 1:3 complete all as specified & directed.
Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
Refixing for 25 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
S&Fin repair rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
S&Fin repair rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair angle stop valve chromium plated fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15 mm bore complete all as specified & directed.
S & F in repair angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
S & F in repair two way angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
S&F in repair stop valve 15mm bore chromium plated with long shank & cup ,fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed type in wall etc complete all as specified and directed.
S&F in repair bib taps , cast copper alloy with capstan head or butter fly handle,chromium plated fancy type (weight not less than 400 gm) screwed down with high pressure screwed for iron pipe and fixed 15 mm bore complete all as specified & directed.
S & F in repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with chromium plated long shank arm including fixing to steel pipe or union complete all as specifed & as directed.
S & F in repair vitreous China wash basin, any colour, flat back size 550 mm X 400 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.
S&F in repair vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified and directed. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.
Supply only plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repair for snack guard of size 35 mm X 5 mm thick fixed with door shutter with nails/screw complete all as specified and directed.
S & F in repair health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection & fixed in position complete all as specified & directed.
S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.
S & F in repair shelf 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms), complete all as specified and as directed.
S & F in repair towel rail brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.
M & L for preparation of old wooden surface of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size of pattern) including all fittings , heads , shoes , bnds , swanecks ,etc including removing from site .
S&F 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed
S&F 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches ,floor complete all as specified and directed.
S&F 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed
S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specified and directed.
S&F 110 mm PVC(SWR) bends any radius complete all as specified and directed.
S&F 75 mm PVC(SWR) bends any radius complete all as specified and directed.
S&F 110 mm PVC (SWR) junction single, (Single-T) equal or unequal with access door complete all as specified and directed.
S&F 75 mm PVC (SWR) junction single, (Single-T) equal or unequal with access door complete all as specified and directed.
S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed.
M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.
S & F 110 mm dia PVC(SWR) WC connector with lip ring, complete all as directed and as specified.
M&L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed .
M&L for post construction anti termite treatment for treating along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed .
S&F 5.5 mm thick sheet glass exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.
S&F 5.5 mm thick sheet glass not exceeding 0.5 Sqm in each pane of superior quality fixed to aluminium frame work with rubber neoprene beading including solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & directed.
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S & F in repair 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed.
S&F in repair 20 mm dia Harrison rails, mild steel chromium plateed with bracket etc., complete all as specified and as directed by Engr-in-Charge.
S&F brass chromium plated fancy type bracket for curtain rod, suitable for 20 mm dia curtain rod of any approved colour and design complete all as specified and as directed by Engineer-in-Charge.
Dismantling old Asbestos cement (corrugated,semi-corrugated, etc.) sheets in roof coverings complete all as specified & directed.
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
S & F fo Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed..
Dismantling wrought iron or mild steel work including framed truss etc.of any description complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries ,rail,rafter, heavy bracket framing (beam, tee, angle, channel or flat sections) distance pieces, cleats,fastening including fabrication and fixing conforming to Fe-410-W(Gde E-250) quality-A complete all as specified & directed.
S & F rolled mild steel sections as in framed structure with main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates, mild steel angle, flat iron ,Z- sections(ISI mark) conforming to Gde Fe-410-0 or Fe 310-0 complete all as specified & directed.
S & F for mild steel screw bolt (machine made) of 16 mm to 20 mm dia of neck with hexagonal or square head one end and screwed the other or screwed both ends, each screw end to be fitted with washer and one hexagonal or square nut, length of bolt not exceeding 10 cm etc complete all as specified & directed.
M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
M & L for preparation of new wooden of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of aluminium paint on old steel painted surface complete all as specified & directed.
Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed
M&L for Brick work using Sub class "B" bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.
All as per item No 97 here in above but except bricks. Note : Bricks obtained item No.96 of BOQ here-in -before.
M & L for preparation of old decorated surfaces of wall including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and treating oil and greasy spot & applying two coat of oil bound distemper on wall surface complete all as specified and as directed.
M&L for 100 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/hard standing etc ,complete all as specified and directed.
M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of primer and a layer of putty (not less than 2.0 mm thick )complete all as specified and directed.
S&F in repair chromium plated curtain rods made out of 19 mm/ 20 mm dia (over all dia 21 mm -22 mm ) mild steel pipe having wall thickness 1.0 mm finish ,colour & pattern as approved by GE complete including fixing brackets ,stops etc complete all as specified and directed. Note: Running length of curtain rod shall be measured & paid only.
M&L for complete removal of existing treatment from wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces of walls and apply two or more coats of premium acrylic exterior emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489-2004 ,alkali andfungal resistance ,dirt resistance a coat of exterior primer applied @ 0.90 ltr /10 Sqm complete all as specified and directed.
Taking down carefully unserveciable/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets ,light fittings etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.
M&L for following point wiring controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.
(a) One light /exhaust fan controlled by one one way switch
(b) One fan point controlled by one one way switch cutting except on ceiling for fan point only (,on ceiling point PVC conduit will be used)
(c) One 3/5 pin socket outlet 5 amp on same board with other switches
(d) One 3/5 pin,5 amp socket outlet on independent board
M&L for point wiring FRLSH cable PVC for the 15 amp 3/5 pin socket power point controlled by one way switch with using with FRLSH PVC insulated PVC unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 2.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 2.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box (normal & modular type) made out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including PVC board with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/ fixing switches etc., including cutting holes for switches,sockets,regulators etc as per requirement including fixing with machine screw,washer etc complete all as specified and directed. Note: Proper colour coding to be adopted.
S & F Modular switch 1 way 6A,one module single pole one way 5 Amp, complete all as specified and as directed.
S & F Modular switch 1 way 16A,one module single pole one way 5 Amp, complete all as specified and as directed.
S & F modular socket, 6A - 2/3 pin combined 2 module complete all as specified.
S & F modular socket, 16A - 2/3 pin combined 2 module complete all as specified.
S & F ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified & as directed
S & F fan step regulator, 1/ 2 module step type , suitable for ceiling fans of any capacity, pre wired 230 volts AC 50 HZ supply 120 Watt complete all as specified & as directed
S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.
S & F LED bulb of capacity 10 watt , lumen out put (1200) length 102 mm dia 56 mm , base cap B22 (ISI mark) ,three star rated lamp with all accessories base complete all as specified and as directed by Engineer-in-Charge.
S & F in repair LED tube light fitting 1 x 20watt , 220 V, AC, decorative box type with driver ,holder including LED tube light surface and wall mounted LED batten PVC housing with polycarbonate diffuser and integrated electronic driver complete with all accessories ,driver, holder including LED tube light connecting up with three core flexible copper conductor cable and flexible pipe of suitable size from ceiling rose to fittingcomplete all as specified and as directed.
S&F Inverter LED bulb of capacity 12 watts lumen out put (1200) length 140 mm width 70mm base cap B22, 3 star, (ISI marked) complete with all accessories base (ISI marked) all as specified & directed by Engr-in-Charge.
S & F in repair LED mirror type light fittings 1 x 9/10 watts integral slim LED batten with high out put diffuser 2 feet long ,220 volt ,AC decorative type with driver holder & LED lamp & all other accessories duly pre wired and making connection with and including three core copper flexible wire and flexible pipe of suitable size from connector to ceiling rose not less than 1 mtr fixed on wall with plastic gutties complete all as specified & directed.
S & F in repair Sub main wiring with two runs of single core 6.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia/appropriate dia with accessories & fittings complete and making good disturbed surface wall complete all as specified and as directed. Note : - Two runs of 6.0 Sqmm cable and one run of earth wire 6.0 sqmm & conduit shall be measured as one unit length and extra length of cable required for connection to MCBs shall be deemed to be include in unit rate quoted by bidder.
S & F modular bell push 6 amp,one module complete all as specified and directed.
S & F bell electric ding dong AC 230 volt single pole complete all as specified and directed.
S & F in repair double door SPN distribution boards steel sheet powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 415 Volts suitable amprs rated busbar 8 way complete all as specified and directed.
S & F miniature circuit breaker (MCB) SP 6 to 32 Amps ('B' Series) having current rating 10 KA,240 Volt in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S & F miniature circuit breaker (MCB) of single pole and neutral (SPN) 40 Amps to 63 amp ('B' Series) ISI marked having current rating 10 KA,240 Volt in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
M/s Ray construction
M/S Parmar Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .