CWE/K-03/2021-22 SPL REPAIRS TO INTERNAL ROADS INSIDE THE GARRISON ENGINEER COMPLEX AND FIELD REGT AT HARDASS UNDER GE KARGIL

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surface(exc 50mm and n exc 100 mm deep), in area not exc 400 Sqm ,all as directed by Engr-in-Charge.

Repair to pot holes any depth not exceeding 1.00 sqm each including sweep free from dust and mud, or water, scoring sunken surfaces in road, etc, cutting around edges to at least 25mm thick in depth making good by filling in screened and graded road metal, watering and well ramming including supply of road metal & making good by applying tack coat of 5 kg/10 Sqm pitting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm blended with 0.09 cum of stone chipping 6.30 mm size again well rammed including supply of premix macadam binder and chipping depth of pot holes exc 30 mm, complete all as specified and directed by Engr-in-Charge.

Preparing black top surfaces by brushing with wire brushes for removing caked mut etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying evenly tack coat with paving bituminious primer/tackcoat at the rate 5 kg per 10 sqm of road surface, complete all as specified and directed by Engr-in-Charge.

M&L premix bituminous macadam laid/rolled and compacted to required gradient and camber(consolidate thickness 75mm or less) using VG 10 grade paving bitumen of any penetration as binder 4% by weight of total mix, complete all as specified and directed by Engr-in-Charge.

Bituminous premixed asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed by Engr-in-Charge.

Preparation of new/old road surfaces and applying Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10 cm wide with road marking paint, white or golden yellow and as directed by Engineer-in-Charge.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed by Engr-in-Charge.

S&F Road safety Convex Mirror of 100 cm dia, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-Charge.

M/S MSD & Associate