PROVN OF CHAIN LINK FENCING TO ENCLOSE THE ADDL AND BEYOND SECURITY WALL POST RE-SURVEY OF RY AGRAHRAM VILLAGE AND ADDN ALTN TO THE EXISTING CHAIN LINK FENCE AT NAD, SPL REPAIRS TO WATCH TOWER NO. 5, 6 UNDER SPL REPAIR B/R AND SPL REPAIR TO LT CABLE

Amount

Excavating soft/loose soil in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance in n.exc 50m and making good surface complete all as specified and as directed.

M & L Plain cement concrete (1:4:8) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, bed etc complete all as specified and as directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exceeding 100 sq. cm and n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed.

M&L TMT bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required including cranking bending hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified.

M&L MS round bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

S & F Rolled mild steel sections conforming Fe-290 (Gde-E-165) as in posts and struts in fencing flat iron fillets including cutting top to shape required or other similar work complete all as specified and as directed

Supply only PVC coated galvanised chain link fencing complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts etc including provision of binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S & F galvanised 2 strand steel barbed wire (Hot dipped galvanised) 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed. (Note : Each line wire to be measured)

S & F 11 to 15mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed the both ends each screwed ends to be fitted with washer and one hexagonal or square nut exc 10 cm but n.exc 15cm long complete all as directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural/ PCC ground and making good disturbed ground complete all as specified and as directed.

Dismantling barbed wire fencing complete all as specified and as directed.

Dismantling fencing wire mesh, chain link fencing any type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for fencing etc. and removing unserviceable materials from site of work .

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated material from site to a distance n.exc 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm below or above ground level including removal of demolished materials from work site complete all as specified and as directed

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge.

Taking down door chowkat or frame with shutter area n. exc 1.5 Sqm each (without taking off shutters from the frame) and removing to store complete all as specified and directed.

Taking down chowkats or frame with shutter, (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4sqm each and removing from site complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Demolition of reinforced cement concrete in roof, floor (other than ground floor) beams, staircase, chajja and similar suspended works (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Hacking out old broken glass any thickness size quality or description from /wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads .

M&L for providing cement concrete type B-1,1:2:4 (using 20mm graded stone aggregate) as cast in situ in lintels upto 1.5m span, cills and other similar bands, plinth courses, string courses, lacing courses, parapets, railings upto 60 cm height, copings, coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating .

M & L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base under floor, complete all as specified and directed.

M & L for Non skid/ joint free ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 (Ist quality) as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 finished even and rough complete all as specified and as directed.

M & L for 1st or premium or standard quality Non skid/ joint free ceramic coloured tiles 400 x 400 x 7-8 mm thick (Ist quality) as in vertical surface such as skirting set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) finished even and rough complete all as specified and as directed.

M & L for Non skid/ joint free ceramic coloured tiles 350 x 250 x7 mm / 450 x 350 x 7 mm thick (Ist quality) as in vertical surface set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) finished even and rough complete all as specified and as directed.

Demolition of Brick work or stone boulders masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed

M&L Brick work with fly ash bricks straight or curved on plan exc 6.0 mtr mean radius built in cement mortar (1:4) complete all as specified and as directed

M & L rendering 15mm thick on fair surfaces of brick wall or concrete surface in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed.

M & L rendering 10mm thick on fair faces of brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5mm thick in cement plaster on ceiling in cement mortar (1:3) finished even and fair complete all as specified and as directed.

S&F 2nd class hard wood (well seasoned) plain, solid, straight, chowkats and frame, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces and size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

M&L 35mm thick 2nd class hard wood Glazed and skelton door shutter, open rebated and prepared to receive glass, gauge etc. divided into squares, with sash bar, with plain chamfered or rounded, mitred and rebated edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc. divided into squares, with plain, chamfered, mitred and rebated sash bars, provided with stiles and rails complete fitted with stiles and rails as specified in SSR-I , Section 8,clause 8.24(a) and fitted to chowkats 30mm thick complete all as specified and as directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton door shutter, open rebated and prepared to receive glass, gauge etc. divided into squares, with sash bar, with plain chamfered or rounded, mitred and rebated edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc. divided into squares, with plain, chamfered, mitred and rebated sash bars, provided with stiles and rails complete fitted with stiles and rails as specified in SSR-I , Section 8,clause 8.24(a) and fitted to chowkats 30mm thick complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified & directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed

S&F UPVC window, (unplastisized poly-Vinyl Chloride) sliding windows multi-chambered and stiffened framed windows using 88 mm x 52mm size sections all-round as main frames and shutters made with profile sections of size 57mm x 42mm, including the cost and fixing of 5mm thick clear float glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps, fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to facilitate smooth operation. Both the frames and the shutters shall be reinforced with Gl profiles of thickness 1.25mm the entire window is covered with MS powder coated tube of size 40mm x20mm all-round the frame the frame section, 10mm square bars horizontally placed at 120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, minimum weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window tames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified & directed

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required

M&L 18/ 19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including teak wood lipping 6mm thick all round complete all as specified and as directed.

S&F 4.8 mm thick sheet glass, ordinary quality & glazing with oil putty in square exc. 0.5 sqm in each pane complete all as specified.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm each pane complete all as specified and as directed

S&F aluminium XPM wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

All as per Srl item No. 47 here-in-before but fixed in repair

S&F 125mm size MS butt hinges medium weight cold rolled fixed to frame complete all as directed.

M&L 200 mm long , aluminium alloy barrel tower bolts anodised extruded section ISI marked complete all as specified.

S & F 150mm size aluminium handles, cast type, anodised complete all as directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F 100mm size MS butt hinges medium weight cold rolled fixed to frame complete all as directed.

M&L 150 mm long , aluminium alloy barrel tower bolts anodised extruded section ISI marked complete all as specified.

S & F 125mm size aluminium handles, cast type, anodised complete all as directed.

M&L repair to beam/ chajja/ drop/ facia (broken/ damaged), making good with PCC 1:2:4 type B1 or cement mortar 1:3, rendering 15 mm thick with using water proofing compound, sides and soffits in cement mortar 1:4 including necessary form work wherever damaged, including re-inforcement duly welded if required, including demolition of broken / loose PCC for taking down old plaster upto 8 mtr height complete all as specified and as directed.

M&L TMT bars 6 to 8mm dia cut to length, bent to shape required including cracking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M & L for providing pressure guniting averaging 30 mm thick in CM 1:3 for concrete surfaces of columns, beams, slabs etc after cutting/chipping the spaling concrete and trimming & cleaning the surfaces to receive the guniting by applying FOSROC NITOBOND AR (epoxy bonding agent) prior to guniting with a coverage of 6-8 Sq.m/Litre complete including providing double scaffolding as required and removal of the same on completion of the work complete all as specified and as directed by the Engineer-in-Charge.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match with the existing floors complete all as specified and as directed

M&L for treating the soil under plinth protection @ 5 ltrs of emulsion per Sqm of surface area complete all as specified and as directed.

M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed

M & L for designer rubber moulded chequered cement concrete tiles 30 cm x 30cm x 25 cm thick conforming to IS-13801-1993 with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

M&L for grouting of column, beam and any RCC surface etc with cement slurry by mixing 50 kg of cement with 18 to 22 litre of water with admixture of FOSROC CEBEX 100 (Plasticized expanding grout admixture) about 225 gms per 50 kg of cement by drilling upto 12 mm dia hole in the surface @ 300 mm C/C upto 60 mm depth and grouting / pumping the grout with mechanically powered grout mixer upto 10 kg for each hole as per manufacturer ‘s instructions and sealing the hole after grouting (GROUT = WATER + CEMENT + FOSROC CEBEX 100 in proportion) complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L applying two coats of oil bound distemper over a coat of primer including preparation of new plastered surfaces complete all as specified and as directed

M&L for complete removal of existing treatment of internal walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M & L for preparation of new external surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated external surfaces and applying two coats of cement based paint over a coat of priming paint complete all as specified and directed.

M&L preparation of old wooden surface of any description not otherwise described and exc 10cm width or girth applying one coat of synthetic enamel paint first grade quality complete all as specified and as directed.

M&L preparation of new wooden surface of any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint first grade quality over a coat of pink primer, complete all as specified and as directed.

M&L preparation of old steel surface of any description not otherwise described and exc 10cm width or girth applying one coat of synthetic enamel paint first grade quality complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed by the Engineer-in-Charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ sub base and paving finished cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral Water Proofing Compound (ISI marked) of approved make complete all as specified and as directed.

S & F 15 mm dia bib tap fancy type, cast copper alloy chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as specified and as directed.

S & F 15 mm dia two way bib cock chromium plated fancy type complete all as specified and as directed.

S & F vitreous china, water closet pedestal pattern (white) 'P' trap (including fixing bolt, low level flushing cistern of 10 ltr capacity and seat cover) complete all as specified and as directed.

S & F in repair 15mm dia stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F soap dish, chromium plated brass, of approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.

S&F 15mm bore Health faucet with 1.5m long easy flex tube in chrome finish and wall hook, complete all as specified and as directed

S&F for wash hand basin vitreous China white coloured flat back of size (630x450) mm including a pair of bracket and cutting for pinning in ends of brackets but excluding taps, waste, chain and plug .

S&F for PVC connection 15mm size with PTMT nuts of length 450mm.

S & F 15mm dia pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts. Screwed for iron pipe complete all as specified and as directed.

Taking up or down 15mm dia. steel tubing and connections including for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20mm dia. steel tubing and connections including for refixing or removal from site complete all as specified and as directed by the Engineer-in-Charge.

S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 20 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F three layer PP-R (Polypropylene random copolymer) pipes of outer dia 25 mm bore pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

M & L Reinforced Cement Concrete type A-1, 1:1.5:3 (20mm graded stone agg) as in chajjas, facia, drops, parapets including necessary scaffolding and formwork etc complete all as specified and as directed.

Use and waste of form work to fins, facia, chajjas, louvers, drops, parapets and railing exc and finishing the surface fair .

M&L for 25 mm average thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in floor finishes with spike rolling to surfaces or making impression of expanded metal while concrete is green complete all as specified and as directed by the Engineer- in-Charge.

Material and labour for point wiring for one light controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn carefully through existing/New concealed conduit along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including new pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including making good disturbed surface all as specified and as directed.

All as per Item no 94 here-in-before but for one light point controlled by two 2 way switch all as specified and as directed.

All as per Item no 94 here-in-before but for one fan E/Fan point controlled by 1 one way switch and regulator all as specified and as directed.

All as per Item no 94 above but for one 3 pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 94 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 94 here-in-before but for one16 Amp 3 & 5 pin switch socket outlet, independent with 4.0 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 4.0 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated un-sheathed cable with multi-stranded copper conductor of 6.0 sq mm size and drawing into and including concealed PVC conduit of 25 mm dia with earthing cable of PVC insulated un-sheathed stranded copper conductor of size 6.0 sqmm, single core, as earth continuity wire all as specified and as directed. (NOTE: 3 runs of 6.0 Sqmm cable and one run of PVC concealed conduit 25mm dia will be measured as one unit i.e. RM)

Supply and fixing socket combination 2 in 1 3 pin 5 and 15 amp flush type universal all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 5 amps all as specified and as directed.

S&F switch flush type, single pole Two way 5 Amps 230 volts all as specified and as directed.

Supply and fixing socket combination 2 in 1 3 pin 5 amp flush type universal all as specified and as directed.

Supply and fixing ceiling rose surface bakelite three terminals all as specified and as directed.

Supply and fixing fan regulator electronic deluxe rotary step type all as specified and as directed.

Supply and fixing sheet metal enclosure for MCCB, DBs, phosphatised, Powder coated , Triple Pole and Neutral (TPN), suitable for 4 way, Double door 415 Volts all as specified and as directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , single pole and neutral (SPN) 240 Volt , double door, suitable for 8way with dim rail earth and neutral bar all as specified and as directed.

Supply and fixing MCB Four Pole (FP) C curve 10kA breaking capacity of 63 amps, 415 Volts in proper position all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F in proper position MCB Double Pole of capacity up to 40 amps, 240 Volts c-series with 10kA breaking capacity all as specified and as directed.

Supply and fixing indoor luminaries decorative batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 10 W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

Supply only indoor luminaries decorative batten for wall/ceiling mounting box type Extruded aluminium housing ,PC Diffuser, energy efficient saving LED BATTEN LIGHT 18 W,230 V,50 HZ, slim integrated design easy install incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed. Make : Bajaj Cat Part No. BCLSB18NW or equivalent as approved by GE

Supply and fixing LED mirror light fittings 07 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed.

Supply and fixing LED bulk head fittings 10 W,230 V,50 HZ suitable for indoor and outdoor applications complete all as specified and as directed. Make Surya Cat Part No. SLE BH 10 W or equivalent as approved by GE

Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clamp etc all as specified and as directed by the Engineer-in-charge.

S&F Exhaust fan wall mount type 300 mm sweep metal body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

S&F Exhaust fan wall mount type 250 mm sweep PVC body , single phase with louver shutter and connecting up including provision of hold fasts for fixing fan and louver shutter with cutting of hole and necessary PCC(1:3:6) all as specified and as directed.

S&F ceiling fan complete with accessories 230v SP 1200 mm sweep and connection with ceiling rose with MS hook for hanging of suitable size all as specified and as directed. Make : Havells Model No. ES 50 or equivalent as approved by GE

M&L for Earthing complete with 2.5m CI pipe 80 mm dia with flanged ends, centrifugally cast, class A, in any length, joints with suitable stainless steel nuts and bolts and sufficient slot up to 2 mtrs length buried directly and preferably vertically in ground with top flanged ended 2 mtrs below ground label welded/connected with GI strip 32X6 mm dia Galvanised iron or steel wire, connected to Earth pit to DB for earthing including filling the pit with charcoal common salt surrounding the earth pipe including drilling 400 mm dia bore in any strata of soil to lower the CI pipe complete

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trench /poles/on wall all as specified and as directed.

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 4 core laid in trench /poles/on wall all as specified and as directed.

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 50 Sqmm 3.5 core laid in trench /poles/on wall all as specified and as directed.

Material and labour for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 70 Sqmm 3.5 core laid in trench /poles/on wall all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, FRLS cable etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft /loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and as directed.

Removing excavated material from site to a distance n.exc 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover class LV, type -I flat with size 250 x 150 x40 mm for protection of cable, laying in trenches complete all as specified and directed.

Material and labour for sand cushioning for protection of underground cable consolidated and compacted with clean dry sand all as specified and as directed (Note : Compacted thickness shall only be measured and paid)

M&L for cutting to existing road/ PCC drain for taking out/ laying UG cable and including necessary earth work and making good to match with the existing surface with PCC 1:3:6 type C1 using 20 mm graded stone aggregate complete all as specified and as directed.

Material and labour for galvanized iron tubing 40 mm bore light grade with all fitting for protection of FRLS cable, laid in trenches/wall/floor including necessary clamp, bolt/nut if any all as specified and as directed.

M&L for Boring of holes under road, pavement hard standing by trenchless technology using ultrasound technology & necessary machine including HDPE pipe upto 140 mm dia suitable for 0.4 Mpa working pressure complete all as specified and as directed.

M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 10/16 sqmm x 2/4 core cables including testing and commissioning complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x 600 x 6.3 mm buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to galvanized earth lead wire 4mm dia (upto 7.5 m in length from earth plate) by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20mm bore, wire mesh charcoal or coke and common salt in alternate layers, of 15cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C-1, 50mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8mm dia reinforced bar 15cm C/C and earth lead handle protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed

Supply, install ,test & commissioning LT panel Outdoor, Floor mounted/pedestal type,cubical,self supported, CPRI approved make, front and rear openable, double door hinged type with locking arrangement and suitable ventilations on both sides IP 54 protection with dust and vermin proof etc,fabricated out of 3.15 mm CRCA sheet duly powder coated, with angle iron frame including bus bar of suitable size for 3 phase 4 wire system, 415 volt, 50 Hz, AC supply with bus bar aluminium 400 Amps capacity with PVC sleeves/ taps RYB colours for phase indication, mounted/ fixed on raised PCC platform of suitable size with PCC 1:2:4, type B-1 (using 20 mm graded aggregate) with control wiring copper stranded PVC insulated FRLS cables compressing cable gland brass, copper/ brass lugs etc conforming to CPRI approved manufacturer including provision of the following accessories :- (a) MCCB 4 pole 250 Amps 50Hz, 415 V, 50 KA -01 No (for incoming) (b) Electrolyte Aluminium busbars PVC colour sleeved 400 Amps capacity TP and 200 Amps for neutral mounted on hygroscopic insulator duly colour coded RYB & Green sleeves

SRI RAJA RAJESWARI ENTERPRISES

SRI GOWRI ENGINEERING WORKS

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

POTHINA SAMBAMURTHY