Construction of cc road and drain near nazakat to irfan in Moh chaupura ward no-1 Maswasi

Earthwork in cutting or in embankment by manual mean in ordinary soil, excavationto be in the from of regular pits not exceeding1/2 meter (20") depth and earth work in embankment to be in 20cm (8") layers including ramming and dressing the surface to required level and slopes and also including 1.5 M(5') lifts and 30M (100ft) lead.distanceas directed by the engineer-in-charge

Construction of granular sub base by providing dose graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compaction with vibratory roller to achive the desired density complete as per clause 401

Construction of un-reinfoced dowel jointed at expanded and construction joint only plain cement concrete pavement thickness as power design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) construction joint applying debonding strips primer sealent dowel bars near approches and construction joints admixture as approved curing to concrete slabs for 14 days using curing compound and finishing to lines and grade as per drawing and technical specification clause 1501

M-150 brick work in 1:4 with one part cement and four part course sand mortar in foundation and plinth including supply of all material labour & T&P etc required for proper completion of work

12mm thick plaster with cement and approved course sand in proportion 1:3 over brick work minimum thickness not to be less than 1cm inclduing supply of all material labour and T&P etc.

R.C.C. work with cement approved coarse sand and 4cm gauge approved grit in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and lits bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. supply of all material, labour and T&P etc. required for proper completion of work binding wire of supplied bu the contractor free of cost.

Mild steel or iron in plain work such as concrete or reinforced brick work (when not including in an over all rates) wrought to required shape as necessary including bending for proper completion of the work

Cement Concrete with 4cm gauge approved stone ballast coarse sand and cement in proporation of 4:2:1 but with 2 cm gauge stone grit instead of 4cm gauge stone ballast including supply of all materials labour and T&P etc for proper completion of work.

Supply & fixing innaurgation stone board including supply of all materials labour and T&P etc for proper completion of work.