Construction of New Community Hall at COP-17 of Gujrat Housing Board, Pandesara in South Zone-A (Udhana), Surat.

NAME OF WORK : Construction of New Community Hall at COP-17 of Gujrat Housing Board, Pandesara in South

Zone-A (Udhana), Surat.

NO. DESCRIPTION Qty. UNIT AMOUNT

WORK UP TO PLINTH LEVEL

1 Excavation for foundation including sorting out and stacking off useful materials

and disposing of the excavated stuff up to 50 mt. lead and all lift, watering

etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 1455.00 C.M. 123.13

SMC SOR-PAGE NO 1 IT NO

2 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the

surplus excavated soil as directed within a lead of 50 M. For following diameter

SMC SOR , ITEM NO. 94, PG. NO.

3 Providing & Filling Rubbles including hand packing & filling interstics with

Quarry Spalls complete for all leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO. 3 154.00 C.M. 1094.11

4 Providing & laying C.C 1:3:6 (1cement : 3 coarse sand : 6 Crushed stone agg

20m.m Nominal size) &curing comp. excl. cost of form work in :(a) foundation &

(A) Foundation 88.00 C.M. 3095.25

(C) Grade Slab 4.00 C.M. 3095.25

SMC SOR, PAGE NO 1 IT NO

5 Providing & laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone agg.

20 mm nominal size) & curing comp. Includ. cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

(C) Grade slab 132.00 C.M. 3741.69

(SOR SMC Pg No. 9 It No. 95)

6 Providing, mixing, placing, compacting by machine vibrator, curing, testing M25

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 234.00 C.M. 4332.50

(SOR SMC - MIX DESIGN PG. NO-14)

7 Providing, mixing, placing, compacting by machine vibrator, curing, testing M25

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement.

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12930.68 -

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt. 0.00 C.M. 11253.32 -

(3) Having cross sectional area more than 0.12 sq. mt. 33.00 C.M. 9288.03

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57 -

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt. 0.00 C.M. 8155.37 -

(3) Having cross sectional area more than 0.12 sq. mt . 76.00 C.M. 7067.84

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness. 0.00 C.M. 7965.38 -

(2) Slabs having more than 10 Cm & upto 13 Cm

(3) Slabs having more than 13 Cm thickness. 9.00 C.M. 6793.97

(SOR SMC - MIX DESIGN PG. NO-14)

(E) RCC Wall - 200 mm Thick 28.00 C.M. 8336.43

(SOR SMC - MIX DESIGN PG. NO-14)

NO. DESCRIPTION Qty. UNIT AMOUNT

8 Providing, mixing, placing, compacting by machine vibrator, curing, testing M35

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement.

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 13194.99 -

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt. 0.00 C.M. 11517.64 -

(3) Having cross sectional area more than 0.12 sq. mt. 24.00 C.M. 9552.35

(SOR SMC - MIX DESIGN PG. NO-14)

9 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl.

bending, binding & placing in position etc.comp.---

Upto G.L./P.L. 55860.00 Kg. 77.29

(SOR SMC Pg No. 1 It No. 8)

10 Providing & construction brick work using Fly Ash bricks having crushing strength

not less than 35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1 cement:6 sand )

etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 314.00 C.M. 4441.11

11 Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 2293.00 C.M. 136.92

12 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 934.00 C.M. 301.78

13 Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Upto G.L./P.L. 133.00 S.M 249.39

(SOR SMC Pg No. 3 It No. 25)

14 Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand).

(B) for ceilings and soffits of stairs

Upto G.L./P.L. 53.00 S.M 225.34

(SOR SMC Pg No. 3 It No. 24)

15 NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting water proof test as directed.

Proiding & laying water proofing treatment to vertical and horizontal surfaces like

consisting of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed with

water proofing compound confirming to IS:2645 in rcommended proportions. (b) II

corse of 20mm cement plaster 1:3 mixed with water proofing compound in

recommended proportion (c) III course of applying blown or / resideal bitumen

applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm micron th. PVC

sheet. (Overlaps at joints of PVC sheet should be 200mm wide and pasted to each

other with bitumen about 1.7 kg./ sqm.)

(SOR SMC Pg No. 6 It No. 63)

16 carrying out plinth treatment to post construction/existing structure by spraying

chemical solution for termite control treatment including labour and material

consisting with ISI specification using chlordene and chiorpurfiles 20 EC as per

6131_part II concentration weight one litter give 1% concentration inclusive of one

litter chemicals emulsions application at the rate of 5 litter chemicals /sqmt of

surface is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

17 Providing 20 mm thick double coat mala cement plaster on brick / concrete work

for plastering comprising of base coat 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.

(SOR SMC Pg No. 3 It No. 27) 193.00 S.M 286.10

NO. DESCRIPTION Qty. UNIT AMOUNT

18 Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry and free from all loose

dirt, chalk, grease, fungi,algae and flaking paint. This can be achieved by brushing

with a wire/ stiff coir brush, followed by water jetting if required. Fill up all minor 193.00 S.M 82.00

cracks and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended. Minimum 4-6 hours duration is

required between each coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

WORK ABOVE PLINTH

19 Providing, mixing, placing, compacting by machine vibrator, curing, testing M25

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12930.68 -

First Floor 0.00 C.M. 12971.23 -

Terrace Floor 0.00 C.M. 13011.78 -

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 0.00 C.M. 11253.32 -

First Floor 0.00 C.M. 11293.87 -

Terrace Floor 0.00 C.M. 11334.42 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 54.00 C.M. 9288.03

First Floor 54.00 C.M. 9328.58

Terrace Floor 20.00 C.M. 9369.13

Above SC Floor 2.00 C.M. 9409.68

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9083.57 -

First Floor 0.00 C.M. 9124.12 -

Terrace Floor 0.00 C.M. 9164.67 -

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 0.00 C.M. 8155.37 -

First Floor 0.00 C.M. 8195.92 -

Terrace Floor 0.00 C.M. 8236.47 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 82.00 C.M. 7067.84

First Floor 52.00 C.M. 7108.39

Terrace Floor 12.00 C.M. 7148.94

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7965.38 -

First Floor 0.00 C.M. 8005.93 -

Terrace Floor 0.00 C.M. 8046.48 -

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7377.92 -

First Floor 0.00 C.M. 7418.47 -

Terrace Floor 0.00 C.M. 7459.02 -

(3) Having more than 13 cm. Thickness

Ground Floor 130.00 C.M. 6793.97

First Floor 83.00 C.M. 6834.52

Terrace Floor 11.00 C.M. 6875.07

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 5.00 C.M. 9963.33

NO. DESCRIPTION Qty. UNIT AMOUNT

First Floor 4.00 C.M. 10003.88

Terrace Floor 0.40 C.M. 10044.43

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 10.00 C.M. 7119.46

First Floor 10.00 C.M. 7160.01

Terrace Floor 0.60 C.M. 7200.56

(SOR SMC - MIX DESIGN PG. NO-14)

20 Providing, mixing, placing, compacting by machine vibrator, curing, testing M35

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 13194.99 -

First Floor 0.00 C.M. 13235.54 -

Terrace Floor 0.00 C.M. 13276.09 -

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 0.00 C.M. 11517.64 -

First Floor 0.00 C.M. 11558.19 -

Terrace Floor 0.00 C.M. 11598.74 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 39.00 C.M. 9552.35

First Floor 39.00 C.M. 9592.90

Terrace Floor 8.00 C.M. 9633.45

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9347.88 -

First Floor 0.00 C.M. 9388.43 -

Terrace Floor 0.00 C.M. 9428.98 -

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 0.00 C.M. 8419.68 -

First Floor 0.00 C.M. 8460.23 -

Terrace Floor 0.00 C.M. 8500.78 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 7332.16 -

First Floor 51.00 C.M. 7372.71

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 8229.69 -

First Floor 0.00 C.M. 8270.24 -

Terrace Floor 0.00 C.M. 8310.79 -

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7642.24 -

First Floor 0.00 C.M. 7682.79 -

Terrace Floor 0.00 C.M. 7723.34 -

(3) Having more than 13 cm. Thickness

Ground Floor 0.00 C.M. 7058.28 -

First Floor 67.00 C.M. 7098.83

Terrace Floor 0.00 C.M. 7139.38 -

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.00 C.M. 10227.64 -

First Floor 0.00 C.M. 10268.19 -

Terrace Floor 0.00 C.M. 10308.74 -

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.00 C.M. 7383.78 -

First Floor 0.00 C.M. 7424.33 -

Terrace Floor 0.00 C.M. 7464.88 -

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg.

m.m Nominal size)& curing comp. incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 13.00 C.M. 4085.83

NO. DESCRIPTION Qty. UNIT AMOUNT

22 Providing, mixing, placing, compacting by machine vibrator, curing, testing M25

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 11.00 C.M. 7765.80

First Floor 11.00 C.M. 7806.35

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9483.21 -

First Floor 0.00 C.M. 9523.76 -

Terrace Floor 0.00 C.M. 9564.31 -

(SOR SMC - MIX DESIGN PG. NO-14)

(C) RCC Wall - 200 mm thick

Ground Floor 13.00 C.M. 8336.43

First Floor 13.00 C.M. 8376.98

Terrace Floor 10.00 C.M. 8417.53

(SOR SMC - MIX DESIGN PG. NO-14)

23 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.---

Ground Floor 55850.00 Kg 77.29

First Floor 63210.00 Kg 78.34

Terrace Floor 12838.00 Kg 79.39

Stair Cabin Top 770.00 Kg 80.44

(SOR SMC Pg No. 2 It No. 15)

24 Designing, providing and executing Bonded/ Unbonded Post-tensioning works for

slabs/beams/drop panels, etc. Including decoiling the strands, cutting to the required

lengths, supplying and laying of sheathing (GI corrugated ducts), jointing with couplers

and inserting the strands, profiling, fixing live anchorages suitable for tendons, grout

vents, making dead end anchorages including lowering the strands, fixing tendon

support bars, supervising the fixing of anti-bursting reinforcement, stressing the cables,

end trimming, grouting the cables with cement and admixtures, with required plants and

machinery tools and tackles, consumables etc. including co-ordinating with

Architectural/Structural consultants drawings and obtaining approval from

client/consultant/Project Manager for the work done as per the requirement of

Architect/Structural Consultant at site. Also include Area marking for Post tensioned

elements. Area for the same shall be measured within peripheral RCC beams/walls

(Walls/beams not included) or boundary of the slab etc. including all requisite as per

Structural Engineer instructions.Including all PT memberes (slab & beam) stagging,

shuttering and reproping shall be carried out as per structural engineer's instruction and

(1) All Post Tensioned Beams Detail Shall Only Be Provided After Finalization Of Pt

Vender By Contractor. (2) Rates Of PT beams Includes All Ancillary

Work/Facility/Item To Be Carried Out By Contractor For Successful Execution Of PT

Work. (3) All Required Reproping For Long Span Beams/Slabs Or Other Critical

Elements Shall Be Carried Out By Contractor Without Any Extra Charge. (4)

Contractor Has To Kept Props For Rcc Elements As Per The Instruction And Detail

From Structural Consultant In Addition To Standard Norms As Per Is : 456:2006

Without Any Extra Cost. (5) Contractor Has To Make All Required And Necessary

Provision To Support Cantilever Slab/Beams Projections And Elements Which

Required Stagging/Shuttering/Formwork Supporting Height More Than Normal Height

Like Additional; Brackets , Ms Beams Etc. Without Extra Cost

25 Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly

Ground Floor 285.00 C.M. 4729.83

First Floor 367.00 C.M. 5018.55

Terrace Floor 79.00 C.M. 5307.27

Stair Cabin Top 16.00 C.M. 5595.99

(SOR SMC Pg No. 2 It No. 16)

26 Half brick masonry in common brunt clay building bricks having crushing strength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

Ground Floor 255.00 S.M. 712.81

First Floor 304.00 S.M. 719.37

Terrace Floor 0.00 S.M. 725.94 -

(SOR SMC Pg No. 2 It No. 17)

NO. DESCRIPTION Qty. UNIT AMOUNT

27 Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 2687.00 S.M 249.39

First Floor 3735.00 S.M 278.94

Terrace Floor 198.00 S.M 308.49

(SOR SMC Pg No. 3 It No. 25)

28 Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 1029.00 S.M 225.34

First Floor 1077.00 S.M 254.89

Terrace Floor 92.00 S.M 284.45

(SOR SMC Pg No. 3 It No. 24)

29 Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP /

PVC) at junction of brick work and RCC work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete as directed.

Ground floor 187.00 S.M. 102.00

First floor 244.00 S.M. 102.00

Terrace Floor 18.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

30 Providing 20 mm thick double coat mala cement plaster on brick / concrete work

for plastering comprising of base coat 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.

Ground Floor 845.00 S.M 286.10

First Floor 847.00 S.M 286.10

Terrace Floor 520.00 S.M 286.10

Above SC Floor 34.00 S.M 286.10

(SOR SMC Pg No. 3 It No. 27)

31 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces

at all floor levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1

cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as vertical ( two times ) up

to good quality and size of grain in elevation as per directed by engineer incharge.

Ground Floor 0.00 S.M 324.00 -

First Floor 0.00 S.M 324.00 -

Terrace Floor 0.00 S.M 324.00 -

LMR Floor 0.00 S.M 324.00 -

(SOR SMC Pg No. 3 It No. 28) MR

32 Providing throating or plaster drip and moulding it to R.C.C. chajja etc.comp.. For

Ground Floor 127.00 R.M 43.74

First Floor 127.00 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

33 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For

all Floor (M.R.)

Ground Floor 128.00 R.M 50.00

First Floor 128.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

34 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :

coarse sand) finishing with flush pointing in white cement.

Ground Floor 19.00 S.M 1092.37

First Floor 38.00 S.M 1092.37

(SOR SMC Pg No. 4 It No. 44)

35 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and

jointed with white cement slurry.

Ground Floor 388.00 S.M 1135.80

First Floor 313.00 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

NO. DESCRIPTION Qty. UNIT AMOUNT

36 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,Jhonson, Nitco,

Somani, Bell, Asian or Euro make in flooring,treads of steps & Landing laid on bed

of 20 mm (Average) base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new

surface or fixing on existing flooring by adhesive material including dismentaling

of existing flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp.Size 24" x 24" For Antiskid tiles

Ground Floor 55.00 S.M 1467.72

First Floor 60.00 S.M 1467.72

(SOR SMC Pg No.4 It No. 43)

37 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and polishing etc. complete.

Ground Floor 735.00 S.M 1019.39

First Floor 1212.00 S.M 1019.39

(SOR SMC Pg No.3 It No. 32)

38 Providing and laying polished Kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) and jointed with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

Ground Floor 51.00 S.M 1130.79

First Floor 22.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

39 Providing and constructing sandwitch type Granite stone platform 0.6 mt. wide &

0.75 mt. height, including one end side granite stone (Double Polish) of 1.25 mt.

height & front granite stone patti of 10 cm wide, vertical partitions of half B.M.

wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement

slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 39.00 R.M. 3128.00

First Floor 4.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

40 Providing and filling in depressions of Bath and W.C. At all floor levels, after

completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp.For all Floors.

All Floor 45.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

41 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows

&clearstory windows incl. Indian teak wood frames of finished size 12cm

x7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat of approved

quality & two coats of oil painting etc. For all Floor (A) Fully Panelled

All Floor 87.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

42 Providing and fixing FRP frame size 125x65 mm and 35 mm thick FRP

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame

is to filed up with injected polyurethane foam done in situ along with embedded

wooden pieces for stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof, termite proof & resistance to

mild acid/alkali. Rates are to be inclusive of S.S. hinges with fastener sleeve &

alluminium fixtures & fasteningsFor all Floors.

(SMC SOR,Pg No.5, It No. 55)

43 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per approved

shade & texture, of make incl. Sal wood frames of finished size 12cm x 7cm.incl.

S.S. Hinges with nessary screws & Anodized aluminum fixtures & fastenings For

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 43.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

NO. DESCRIPTION Qty. UNIT AMOUNT

44 Providing and fixing window having extruded aluminium colour anodized section frame

main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x 31.75 mm x

mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal

member size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456

Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947,

@ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder coated aluminium fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc. complete

for window.For all Floors.

(A) Same as above but colour anodized 77.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.16

45 Providing and fixing window having extruded aluminium POWEDER COATED section

frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of

0.738 Kg/mt), horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm (of

jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm

x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.00 S.M 1591.87 -

0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminium fittings & fixtures and transparent silicon sealant

glass fixing to frame as per details etc.

(A) Same as above but colour anodized

All Floor 26.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.16

46 Providing and fixing standared extruded ofalluminium section of size 63mm x

38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

A) Same as above but Colour anodized 11.00 S.M 1175.56

SMC SOR Alluminium Work ITEM NO.4A,Pg No.16

47 Providing & laying granite slab 18 mm thick in Window-Door seal,Frames Etc

laid on 10 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand) with necessary

adhesive material and finished with flush pointing in white or colour cement,

including rubbing & polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all

For all Floors. 181.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

48 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 1777.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

49 Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around square or

round bars with round headed bolts & round headed bolts and nuts or by screws

incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 5295.00 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

50 Painting two coat (excluding priming coat) on new steel and other metal surface with

synthetic enemal paint, burshing to give an even shade including cleaning the surface of

all dirt, dust and other foreign matters. (A) For plain grill For all Floor

For all Floors 268.00 S.M 68.57

SMC SOR, colour works,item no.-8,Pg No.15

51 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel nuts

and bolts complete, i/c fixing the railing with necessary accessories & stainless steel

dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 263.00 Kg. 450.00

NO. DESCRIPTION Qty. UNIT AMOUNT

52 (1) The whole work is to be executed through specialized agency with a guarantee of

(Ten) years given on a prescribed proforma duly stamped (2) The rate shall include for

work at all floors & conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including cleaning the surface

before tratment.(b) Laying cement concrete using broken bricks/brick bats 25 mm to

100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special water

proofing compound confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along the vertical surface of

the parapet & other adjoining wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing and for final test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 964.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound confirming

to IS:2645 about 25 mm. th' in the floor of the depression & about 18mm th' On the side

walls of the depression up to the floor level, water proofing plaster about 18 mm. th' be

continued on the walls above the floor level for a height of 600 mm. with surface

suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading @0.008

C.M./S.M., thoroughly embedad in plaster layer. as per specifications & instructions of

Engineer in charge (Cement consumption 0.316 Bags / S.M.)

For all Floors 246.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

53 Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glased tiles of to be laid over cementr morter 1:3 to plain or

slope and to be tempered to bring morter crème out up to surface using white

cement including grounding off jnctions and extending them up to 15 cm along the

wall, clearing with water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 964.00 S.M 779.70

54 Apply two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other matter and sand papered

(A) for wall and similar surfaces

For all Floors 6757.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 2255.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

55 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 6757.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 2255.00 S.M 83.36

SMC SOR , coiour works,Pg No.15,item no.-5

NO. DESCRIPTION Qty. UNIT AMOUNT

56 Providing & applying two coats of weather shield max paint (3 coats may be required

in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including

applying exterior acrylic primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as directed by the

architects and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a

wire/ stiff coir brush, followed by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be thoroughly scraped off and

Clean the surface thoroughly using wire brushes. Priming: Apply a liberal coat of

exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between each coat of weather

shield max paint.For all Floors.

For all Floors 2246.00 S.M 82.00

SMC SOR, coiour works,Pg No.15,item no.-17

57 Providing and applying textured plaster as per design of ICI Dulux or of Asian

paint as per manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including scaffolding, 2439.00 S.M 882.00

preparing the surface, watering, curing etc. complete and as directed by the

architects and manufacturers.

58 Providing & laying granite slab 18mm thick in flooring, treads of steps and landing

laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

mortar 1:1.5 laid and finished with flush pointing in white or colour cement

including rubbing and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 112.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

59 Providing & laying granite slab 18mm thick in skirting, risers of steps,dedo and

pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR PAGE NO 4,IT NO 40 M.R. 22.00 S.M 2449.00

60 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe

with hooked ends to RCC slabs curing, layig including painting the exposed

portion of loops, all as per standard design complete.

For all Floors. 70.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

61 Steel work welded in built up sections, framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins connected to common raffers

& the like. For all Floor

For all Floors. 16.00 Qtl. 9108.48

SMC SOR ,Pg No.9,IT NO 98(A)

62 Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is

coated with an anti-UV Co-extrusion layer having good weather resistance, it can

maintain its optical properties and mechanical performance for a long time. Fasting

is usually done by screws. , The fastening screws should beinserted about 500 mm

apart and 300mm apart Along the supporting internal purlin and edge pulin.All

fixing holes with diameter at least 2 mm larger than screw must be predrilled into

each screw location. The screws should be 6mm diameter with length according to

sheet thickness and corrosion resistant, with at least heavy duty hot dripped

galvanized or stainless steel. Excluding the cost of purlins rafter and trusses.

(b) 2 mm thick Solid Sheet 9.00 S.M 1510.00

SMC SOR ,Pg No.10 IT NO 109(b) MR

63 Extra for additional height of proping and centering where the height of proping

and centering exceed 4.0M between supprting floor to ceilng including temporary

brick or stone pillars for suporting as required

1) height more than 4.0M and upto 5.0M 442.00 S.M 390.34

2) height more than 5.0M and upto 6.0M 442.00 S.M 688.83

R&B SOR, Pg No.75 ,Item no.-09002AA/09002BA

NO. DESCRIPTION Qty. UNIT AMOUNT

64 Providing & fixing in position collapsible steel shutters with vertical channels

x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with top & bottom rails

of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp. with bolts, locking

arrangements, stoppers, handles incl. applying a priming coat of Redlead paint etc.

Ground Floor 52.00 S.M 6158.35

SMC SOR , PAGE NO 5, IT NO

65 Providing and filling Epoxy grout of approved or suggested brand by consultant /

Engineer in charge in 4mm to 6mm thick tiles joint including spacer with cleaning

of joint by vacuum or blower etc

SMC SOR , PAGE NO 11, IT NO 125 MR 3472.00 R.M 40.00

66 Masonary work using AAC Block Aerated light weight concrete block

having crushing strength not less than 35 kg/sqcm for super structure above plinth

level upto floor two level in cement mortar 1:5 ( 1 cement : 5fine sand )

complete as per Technical Specification

Ground Floor ( 1ST SLAB ) 49.00 C.M 4854.12

(LIBRARY & RECREATION CENTER AT P.T.P.S. NO. 35 (KATARGAM),

F.P.NO 133, IT:31 SCDUAL B )

67 Providing & fixing at all floor levels,both face polished machine cut edge

Marble slab for Shelve joined with grey/White cement slurry (1:1) incl. Rubbing

& polishing etc. complete. (M.R.) (Basic Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 19.00 S.M 1050.00

68 Providing, fixing, fitting S.S. Latter of quality SS 304 or with colour powder

coating incliuding Necessary fixture & Fastaning with scaffolding etc. complete. 2000.00 R.inch 85.00

As per requirement & Direction of Engineer in Charge.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P. NO.76

(SARTHANA) incd GTS ITEM

69 Providing, Approving designing and supplying 6mm thick white Acrylic computer

Laser cutting Latter including necessary scaffolding, pasting on ACP sheet or 2000.00 R.inch 85.00

similar surfaces, etc. complete.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P. NO.76

(SARTHANA) incd GTS ITEM

70 Wall Vinyl Sticker 44.00 SqFt. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

71 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SqFt. 38.00

SMC SOR, PAGE NO.13,IT NO 147 (MR)

72 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SqFt. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

73 5mm PVC sheet Eco Vinyl (Any size) 44.00 SqFt. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

74 Decorative theme base designing & painting with all waterproof materials 474.00 SqFt. 63.00

SMC SOR, PAGE NO.13,IT NO 150 (MR)

WATER SUPPLY & SANITATION

75 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels,

size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Jaquar ,HindWare

For all Floors. 2.00 Nos. 3277.39

SMC sor- Sanitary Items, Page no21, It No.

76 Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap with normal closing seat cover L bend ncluding jointing the

trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous china

Make- Cera CONVENTIONAL B1510121 , HindWare sleek 20011, Jaquar- CNS-

WHT-751P180SPPZ

For all Floors. 21.00 3.65 3530.09

SMC sor- Sanitary Items,Page no20,It No.

77 Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome

plated PVC Hose Pipe

Make- Cera F8030106AB, Jaquar ALD-587 ,HindWare F160109

For all Floors. 21.00 Nos 1009.90

SMC sor- Sanitary Items, Page no21, It No.

78 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make- Cera F8010202 , Jaquar FLV-1089NSQ ,HindWare F860075 21.00 Nos 3500.99

For all Floors.

SMC sor- Sanitary Items, Page no21, It No.

NO. DESCRIPTION Qty. UNIT AMOUNT

79 Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x

400 mm at all floor levels, with C.I. or M.S. Brackets painted white incl. cutting

holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Jaquar SLS- WHT -6801 ,HindWare10004

For all Floors. 29.00 Nos 3276.63

SMC sor- Sanitary Items, Page no20, It No.7

80 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs

with C.P.brass screws and washers etc. For all Floor

All Floor 11.00 Nos 859.41

SMC sor Page no7 , It No.72

81 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass

screws complete

Make- Cera F2013101, HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 29.00 Nos 1457.97

SMC sor Sanitary Items,Page no20, It No.

82 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

polished bright etc. comp

Make- Cera F2013151 BIB COCK, HindWare F280002 BIB COCK, Jaquar FLR-

5047 N BIB COCK

SMC sor Sanitary Items,Page no20, It No.

83 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels,

polished bright etc. comp

Make- Cera F2013163, HindWare Cat. No.: F530004, Jaquar FLR-5041N 22.00 NO 1828.81

SMC sor Sanitary Items,Page no20, It No.

84 Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare F280052 & CONCEALED

STOP COCK F850105

All floor 21.00 NO 2056.47

SMC sor Sanitary Items,Page no20, It No.

85 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper

connecting pipe 450 mm long and nuts, washer and brass flange complete,

including cutting and making good the wall where required.

Make- Cera F1020362, HindWare Cat. No.: F440020 F850094, jaquar CON

For all Floors. 29.00 Nos 1564.36

SMC sor- Sanitary Items,Page no20,It No.

86 Providing and fixing Towel Ring fabricated from seamless stainless steel tube

2mm thick in bath room with polished wall flange at end of bars with heavy duty

anchor fasteners & accessories

Make- Cera F5014115CH, Jaqua ACN 1121N ,HindWare F880007

For all Floors. 11.00 Nos 924.24

SMC sor Sanitary Items,Page no20,It No.

87 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Jaquar ACN-1131N,HindWare F880011

For all Floors. 11.00 Nos 839.91

SMC sor Sanitary Items,Page no20,It No.

88 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter

with jali of the following nominal diameter of self cleaning design with C.I. scread

down or hinged grating including the cost of cutting and making good the walls.

All floor 15.00 586.27

SMC sor.Page no 8,It No.

89 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type"B") of

Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for soil and waste discharge

system at all floor levels incl. All fixtures like bends, tees,shoe etc. jointed with

resin of approved brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

90 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for rain water at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

NO. DESCRIPTION Qty. UNIT AMOUNT

SMC sor ,Page no 8, It No. 85 M.R.

91 Providing and fixing in position P.V.C. cowl vent to pipes of prince, suprime, jain

Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

92 Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing

with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse sand])

finishing as per instruction given by Eng. incharge. For

75mm PVC pipe 140.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

93 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC sor Page no 8 It No.

94 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand & manufacture etc. comp. Pipe shall

be fixed on the wall the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

SMC sor Page no8 It No. 87 MR

95 Providing and fixing M.S. holder bat clamps at all floor level,of approved design

to C.I. or S.C.I pipes including cost of cutting holes and making good the wall etc.

SMC sor- Page no8, It No. 90 MR

96 Providing and fixing G.I. holder "Z" clamps at all floor level,of approved pipes

including cost of cutting holes and making good the wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00 -

SMC sor- Page no 11, It No. 121 M.R.

97 Providing and fixing gun metal check or non return full way wheel valve at floor

levels,etc. complete.

SMC sor Page no8,It No.

98 Providing and fixing abonite ball cock of approved quality as directed etc. comp.

SMC sor- Page no 8,It No.

99 Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in cement mortar

in proportion 1:1 of following nominal internal diameters including testing of pipes

and joints etc. complete.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

100 Providing and fixing s.w. Gully trap with C.I. gratting brick masonary chamber

and water tight Pre cast R.C.C.cover of 300mm X 300mm size (inside) including

plastering smooth inside and outside 15 mm thick in C.M 1:3 etc. comp.i) square 10.00 Nos 1098.05

mouth traps (A)300 MM X 300 MM Size - P type.For all Floors.

NO. DESCRIPTION Qty. UNIT AMOUNT

SMC sor,Page no 7, It No.

101 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x

mm & 450 mm deep sewer trap chamber with 23 cm th' B.B. masonary walls in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 0.00 No. 3166.77 -

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not

less than 38 kg. On top etc. comp. for single pipe.'.(A) Precast RCC heavy duty

Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 10.00 No. 2915.61

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 233.85 -

SMC sor, Page no.7, It No.75

102 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size), Foundation concrete 1: 5: 10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. Inside dimension, 455 x 610 mm &450 mm deep for

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 10.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39 -

SMC sor - Page no7,It No.76

103 Providing and constructing Grease Chamber (Grease Trap) of internal size

mm × 450 mm × 600 mm deep, including excavation in all types of soil,

foundation preparation, and 100 mm thick RCC base slab (1:2:4 Mix), 230 mm

thick brick masonry walls in cement mortar (1:5) with internal partition wall,

mm thick internal plaster in CM (1:3) finished smooth, internal surface treatment

with two coats of polyurethane liquid waterproofing coating (Sika/Fosroc/Sunanda

or approved equivalent) over primer with geotextile reinforcement at corners and

joints, external surface coated with two coats of bituminous paint over primer as

per IS standards, Foundation concrete 1: 5: 10 & fixing C.I. cover with frame to be

not less than 38 kg. On top painted with zinc chromate primer and enamel paint,

including provision of SS 304 perforated removable basket, 75 mm dia PVC

(SWR) inlet and outlet pipes with necessary fittings, and finishing all works

complete in all respects including curing, testing for watertightness, and disposal of

surplus earth as per specification and direction of Engineer-in-Charge.

104 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight

not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 10.00 NO 958.17

105 Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm Length

SMC sor- Page no6 It No. 64 10.00 NO 101.91

106 Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556

(Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap

and pipe to wall with C.P. flange complete including cutting and making good the

walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 13261H

,HindWare BACK SMALL

SMC sor- Sanitary Items,Page no.20, It No.8

107 Providing & fixing at all floor levels,both face polished machine cut edge Marble

slab for urinal partition joined with grey/White cement slurry (1:1) incl. Rubbing

& polishing etc. complete. (M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 16.00 S.M 1050.00

108 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering,

vibrating, curing & mixed with approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing admixture as water proofing

agent to be mixed with 50 kg. cement bag shall be as recommended by the manufacture

of the water proofing material, concrete work for top, bottom slab & side pardi for

Under ground Tank & Item incl. Necessary excavation & refilling the available earth,

15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside

R.C.C. pardi as per design, 10mm.th. water proofing cement plaster in C.M. 1:3 with

smooth finishing,watering etc.Comp.to all inner face & bottom of tank curing etc. comp.

incl. Locking arrangement, outlet, inlet, overflow & wash out pipe arrangement as

necessary & C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineer-in-charge

Under Ground water Tank 10000.00 Lit 6.87

SMC sor - Page no6. It No.

NO. DESCRIPTION Qty. UNIT AMOUNT

109 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson, Nitco,

Somani, Bell make at all floor levels, in flooring, treads of steps & landings laid on

a bed of 12 mm. Av. Th.C.M.1:3 (1cement : 3 sand) finished with flush pointing in

white cement etc.com. For all floors

Under Ground water Tank 61.00 SM 900.29

SMC SOR, Page no4, It No.

110 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson, Nitco,

Somani, Bell make at all floor levels in skirting risers of steps & dado on 10 mm.

th. C.M.1:3 (1cement :3 sand) including necessary cement paste for fixing and

joined with white cement slurry etc.complete. For all floors

Under Ground water Tank 114.00 SM 932.02

SMC SOR, Page no4, It No.

111 Providing & fixing IS Mark TMT FE 500D reinforcement for R.C.C. work incl.

bending, binding & placing in position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 1180.00 Kg. 77.29

SMC SOR- Page no1, It No.

112 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark

water tank of required capacity each with all necessary fittings & connection etc. 6000.00 Lit 3.95

complete on terrace.

SMC SOR- Page no 8, It No.

113 Acoustical Panel Finish: Providing and fitting of acoustic panels with Standard

size & thickness of 1220*2420*9mm of brand Artois, Smart Pannel, Senses

Akustik only in Gradient Pattern. Panels should have Sound Absorption coefficient

(NRC) 0.84. Formaldehyde emission standards of GB18580-2001 class E1, it

should be a green material with asbestos-free, non-toxic and tasteless gas under

extreme temperature, protecting the ozone layer, non-irritant and recyclable.

acoustic panels have to be Fire-resistant as per China standard class B1. Good

insulation properties, to prevent transmitting the heat from outdoor to indoor

directly as partition or and ceiling, saving 35% of energy, extending the life of air

conditioning.including all acceessories, material, labour etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in charge And as per "

Architecture" detail.

As per Approved Rates of SMIMER Furniture

114 Acoustical Grid Ceiling: Providing & Fixing of 600 x 600 Armstrong, Optra Soft

Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge

Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity

Resistance (RH) of 95%, NRC 0.9 -, Light Reflectance ≥85%, Colour White, Fire

Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x

As per Approved Rates of SMIMER Furniture

115 Plain Gypsum Sheet Ceiling: Providing and fixing of Plain Gypsum Sheet

Ceiling using 80 mm. x 26 mm. x 0.50 mm. thick g. i. Ceiling Sections, 15 mm. x

45 mm. x 15 mm. x 0.90 mm. thick Intermediate Channels, 20 mm. x 28 mm. x

mm. x 0.50 mm. thick Perimeter Channels and 25 mm. x 10 mm. x 0.50 mm thick

Ceiling Angles, as per IS 513 & 150 GSM Galvanised finish as per IS

including 8 mm Dia. 45 mm long, Zinc coated, CR1 grade Rawl Plugs, 27 mm x

37 mm x 25 mm x 1.60 mm thick Soffit Cleats, 2.64 mm Dia. High Carbon Spring

Steel Wire Connecting Clip, confirming to IS 513, 12.50 mm Th. Tapered Edge 162.50 SM 800.00

Gypsum Board Plain, conforming to IS 2095- Part 1: 2011 Certified Boards, Screw

Fixed to Ceiling Sections, using 25 mm Drywall Screws [material-carbon steel EN-

ISO 7049/50, finish-case hardened Grey Phosphating] at 230 mm c/c on Ceiling

Sections & 150 mm at Periphery of Ceiling. Square and tapered Edges of the

boards shall be jointed and finished so as to have a flush look, including filling and

finishing with Jointing Compound, conforming to ASTM C475, & Joint Paper

Tape etc. complete with all Material, Labour with all Lead, Lift and Transport and

SMC Approved Rate

116 Wooden + Laminated wall Panel: Providing and fixing of wooden wall &

Ceiling panel using 18 mm ply of brand (Greenply Ecotec, Sylvan Ply, Bhutan

Tuff, Saburi Ply,Century Sainin, Sainik MR), 1.00mm Th. Lamination, Aluminium

channel & pipe (75 x 75 x 12.5mm), screws etc. complete with all material, labour 160.50 SM 4005.40

& scaffolding with all lead, lift and transport. and finished and complete the work

satisfactorily as per instruction of architect or Engineer-in charge and as per "

architecture" detail.

AREA & GROUND DEVELOPMENT

PAVER BLOCK & VDS ROAD

117 Box Cutting the road surface to proper slope and camber for making base

includinng removing the excavated stuff and depositing on the road side slope as 685.00 C.M. 109.41

directed up to 50 mt. lead.

NO. DESCRIPTION Qty. UNIT AMOUNT

SMC SOR-PAGE NO 19 IT NO GD.1

118 Preparation of subgrade with compacting, Leveling and consolidation of

subgrade with miniroller/plate vibrator machine including watering and filling in 2823.00 S.M. 4.93

depression occur the process as directed by engineer in charge.

SMC SOR-PAGE NO 19 IT NO GD.2

119 Providing & laying Granular Sub Base(GSB) confirming to Grading V of Table

400.0 of compacted th. Of 150 mm with specified graded stone metal and sand

mixed in place and laid with mechanical means spreading with motor grader and

compactiong with vibratory roller having miimum 80-100 KN static weight to

achieve desired dencity of 98 % of MDD including all material, labour, machinery

with all leads and lifts etc. comp.

SMC SOR-PAGE NO 19 IT NO GD.9

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m

Nominal size)&curing comp. excl. cost of form work in :(a) foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

121 providing and laying 200 micron plastic sheet on prepared sub base as per

instruction of Engg. In charge etc. complete.

SMC SOR-PAGE NO 19 IT NO GD.12 MR

122 Supplying & filling fine sand (pana) in 75 mm /100 mm / 150mm compacted

thickness over the base including necessary compaction, watering etc. compacted.

Item includes levelling by using vibratory plates compacted machine and as

directed by engineer in charge.

SMC SOR-PAGE NO 19 IT NO GD.4

123 Providing 100mm th. Ready made C.C. kerb of strength M-20 (Size 300mm X

380mm) purchased from SMC's approved paverblock manufacturer & setting in

line level and in truly vertical postion, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of cement :

part of coarse sand) including watering etc. complete and as directed by engineer in

SMC SOR-PAGE NO 19 IT NO GD.6 MR

124 Providing interlocking type Rubber moulding cement concrete Paver Block of

approved shape, design & colour having 60 mm thickness (M-35) Purchased from

S.M.C's approved paverblock manufactures only & fixing on fine sand bedding.

Item includes leveling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering, cleaning etc.

With colour 809.50 S.M. 524.00

Without colour 809.50 S.M. 524.00

SMC SOR-PAGE NO 19 IT NO GD.7 MR

125 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming

& consolidation etc. complete.

SMC SOR-PAGE NO 19 IT NO GD.3

126 Providing & filling in plinth with murrum or selected soil in layers of 20 cm. Th'.

Incl. watering, ramming & consolidation etc. complete.

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique

including floating surface with a skim powder floater, curing etc. complete.

Internal road 150.50 C.M. 5981.00

SMC SOR-PAGE NO 19 IT NO GD.10

128 Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of 1/3 of total thickness

with filling of epoxy sealent as directed by engineer in charge

SMC SOR-PAGE NO 19 IT NO GD.13

129 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work

incl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 6020.00 Kg. 77.29

SMC SOR-PAGE NO 1 IT NO

130 Demolition including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift (ii) Unreinforced cement concrete

131 Demolition including stacking of serviceable materials with all lead and lift. (i))

SMC SOR-PAGE NO 17 IT NO

132 Demolition of brick work and stone masonry including stacking of serviceable

materials and disposal of unserviceable materials with all lead and lift. (i) On 7.40 C.M. 577.92

SMC SOR-PAGE NO 17 IT NO

133 Dismentalling tiled or stone floors laid in mortar including stacking of serviceable

material and disposal of unserviceable material with all lead and lift

NO. DESCRIPTION Qty. UNIT AMOUNT

SMC SOR-PAGE NO 17 IT NO

134 Removing and scraping of old deteriorated plaster of any thickness from wall /

RCC member including stacking of serviceable material and disposal of 15.00 S.M. 20.55

unserviceable from site of work with all lead and lift.

SMC SOR-PAGE NO 17 IT NO

135 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments, tools,

material, labour, etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be submitted and got approved

from the authority prior to start of work. The rate shall also include cost of drilling

of hole of required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and other necessary tools

and tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item includes

necessary scaffolding, staging, labour, tools and equipments, etc. complete as

directed by the engineer-in charge.

SMC SOR-PAGE NO 11 IT NO

136 Dismentalling of R.C.C work by electric breaker, rate to include all lead, lift

scaffoulding, transportation, and labour etc. complete. As directed by engg. 30.00 Hr. 125.00

COMPOUND WALL & MAIN GATE

137 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the

surplus excavated soil as directed within a lead of 50 M. For following diameter of

for 250 mm dia 282.00 R.M 334.80

for 300 mm dia 117.00 R.M 401.28

SMC SOR-PAGE NO 9 IT NO

138 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 37.80 C.M. 123.13

SMC SOR-PAGE NO 1 IT NO

139 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 gradedstone

agg. 40 mm nominal size) & curing comp. excl.cost of form work in

(A) Foundation and plinth 9.30 C.M. 2769.69

SMC SOR-PAGE NO 1 IT NO

140 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu. Cost

of reinforcement for reinforced concrete work in

(A) foundation, footing, base of columns and mass concrete 21.10 C.M. 4250.50

SMC SOR-PAGE NO 1 IT NO

141 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 28.50 C.M. 9102.61

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

SMC SOR-PAGE NO 1 IT NO

142 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in

(1) Having c/s area up to 0.08 sq.mt. 0.00 C.M. 12844.32 -

SMC SOR-PAGE NO 1 IT NO

143 Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg. 20 mm nominal

size) & curing complete including cost of formwork in wall caps & copping.

SMC SOR-PAGE NO 9 IT NO

NO. DESCRIPTION Qty. UNIT AMOUNT

144 Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each 7.40 C.M. 136.92

disposited layer by ramming and watering.

SMC SOR-PAGE NO 1 IT NO

145 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

workincl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 7240.00 Kg. 77.29

SMC SOR-PAGE NO 1 IT NO

146 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 s.mt 13.70 C.M 12844.32

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 7.40 C.M 11166.97

(1)Having c/s area up to 0.08 s.mt 0.00 C.M 9102.61 -

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 8174.41 -

SMC SOR-PAGE NO 1 IT NO

147 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

workincl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 4363.00 Kg. 77.29

SMC SOR-PAGE NO 1 IT NO

148 Brick work using common burnt clay building bricks having crushing strengthnot

less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly

At ground floor 157.50 C.M. 4729.83

SMC SOR-PAGE NO 2 IT NO

149 Half brick masonry in common brunt clay building bricks having crushingstrength

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

At ground floor 0.00 S.M. 712.81 -

SMC SOR-PAGE NO 2 IT NO

150 Providing & Applying 10mm.th.cement plaster in single coat on brick/concrete

walls similar surfaces for plastering & finished even & smooth with afloating coat

of cement slurry mixed with admixture of lime or neeru inrequired proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 S.M. 199.28 -

(B) For ceilings & soffits

At Ground Floor 0.00 S.M. 225.34 -

SMC SOR-PAGE NO 3 IT NO

151 20mm thick sand faced cement plaster on walls for height more than 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc.

At Ground Floor 1467.30 S.M. 347.42

SMC SOR-PAGE NO 3 IT NO

152 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp..

At Ground Floor 0.00 R.M. 43.74 -

SMC SOR-PAGE NO 3 IT NO

153 Pro. smooth plaster patta

At Ground Floor 1827.70 R.M. 27.27

154 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For

all Floor (M.R.)

At Ground Floor 1836.20 R.M. 50.00

SMC SOR-PAGE NO 3 IT NO

NO. DESCRIPTION Qty. UNIT AMOUNT

155 Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with

a wire/ stiff coir brush, followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended. Minimum 4-6 hours duration is required

between each coat of weather shield max paint

(A) For wall 1467.30 S.M 82.00

SMC SOR- COLOUR WORK PAGE NO 16 IT NO

156 M.S. Gate Steel work welded in built up sections,frame work including cutting,

hoisting, fixing in position and applying apriming coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with connection plats or angle

cleats as in main and cross beams, hip and trussed purlins connected to common

raffers and the like.

Ground Floor 12.20 Qtl 9108.48

SMC SOR-PAGE NO 9 IT NO

157 Providing & fixing M.S. Grills of required pattern to wooden frames of

windows etc. at all floor levels with M.S. flats at required spacing & frame around

square or round bars with round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp. (A) Plain Grill For all floors

All Floor 9782.00 KG. 109.41

SMC SOR-PAGE NO 5 IT NO

158 Painting two coat (excluding priming coat) on new steel and other metal

surface with synthetic enemal paint, burshing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matters.

Ground Floor 799.90 S.M. 68.57

SMC SOR- COLOUR WORK PAGE NO 15 IT NO

159 LAWN : Area cleaning and side grading, removing unwanted materials, plants,

chrubs,wild grass, weeds,debris,rubbish,etc. Excavating up to depth 30 C.M

surface dressing leveling, making slopes for drainage according to landscape,

Disposal of unwanted materials with all labour and tools. Development of lawn

including preparation of bed ground, spreading and mixing the good soil with Farm

Yard Manure, Gypsum, fertilizer soil with farm Yard Manure, Gypsum, Fertilizer

bas required hand specified. Planting of lawn grass bits roots of approved quality,

watering and specified. Planting of lawn grass bits roots of approved quality,

watering, and specified. Planting of lawn grass watering mowing, weeding etc.

maintenance of developed lawn for a period of 6 months.

160 Supplying on site plants with following specifications . Plants would be in good

condition and of specified height. The rates would be inclusive of all taxes, sales

tax, Octroi,transportaion etc. complete F.O.R. site. Conditions of plant would be

verified at the time of selction as well delivery. All complete and as per instructions

of the Engineer-in-charge.

Lagerstroemia thorell II - 3.66m ht 15.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 15.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 15.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. 20.00 Nos. 75.00

Nephrolepis exalotta smithi - 0.45x0.30m 20.00 Nos. 20.00

Champa - 3.66m ht. 30.00 Nos. 270.00

WATER SUPPLY & SANITARY

NO. DESCRIPTION Qty. UNIT AMOUNT

161 Providing and constructing simple chamber of 23cm. of B.B. masonary wall in

c.m. 1:5 incl. 15mm. thick cement plaster in c.m 1:3 inside and out side to

exposed faces R.C.C. top slab with1:2:4 mix (1 cement : 2 sand : 4 grade ston

aggregate 20mm size), foundation concrete 1:5:10 with fixing Precast RCC. heavy

duty cover on top etc. inside dimension 455 x 610mm & 450mm deep for single

SMC SOR-PAGE NO 7 IT NO

162 Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc. Comp

SMC SOR-PAGE NO 7 IT NO

SMC DRAINAGE SOR-22/23

163 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand & manufacture etc. comp. Pipe

shall be fixed on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

SMC SOR-PAGE NO 8 IT NO

164 Providing and fixing C.P brass screw down bib tap at all floor level polished

bright etc. comp.

SMC SOR-PAGE NO 8 IT NO

165 Providing and fixing gun metal check or non return full way wheel valve at

floor levels,etc. complete.

SMC SOR-PAGE NO 8 IT NO

RECHARGE BORE WELL

166 Drilling 300 mm diameter borewell in all types of strata up to required depth

including cost of bentonite powder, carting rings, cutter, other required materials,

labour charges etc. complete. The drilling shall be done by mud flushed rotary

equipment and bore holes should withstand at least till completion of subsequent 82.36 R.M 857.00

activities like assembly jointing, lowering of casing / strainer pipes, gravels

packing, yield testing etc, complete up to required depth as shown in drawing and

directed by engineer –in- charge.

CE/HYD/01/2024-25 IT No

167 Supplying and filling clean best quality of well sorted - " SEVALIYA" sorted pea

gravel having size 6 mm to 10 mm in layer of required thickness in filter chamber 3.00 C.M 2029.00

as per drawing and as directed by Engineer –in- charge.

CE/HYD/01/2024-25 IT No

168 Providing and fitting bail plug having length 0.45mtr. from M.S medium class

pipe as per ISI for 200 mm diameter pipe.

169 Development of each water bearing zone come across up to the depth of tube well

(size 250 mm diameter & depth more then 150 ft.) by lowering 100 mm diameter JOB

drop line and 32 mm diameter GI air line for each Zone with air compressor of WORK

capacity not less.

170 Providing & Fixing MS Clamps with threaded of standard make suitable for ERW

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm x 10mm thick

suitable for 200mm diameter.

171 Excavation for foundation in and all kinds of soil including leveling and ramming

the bottom of trenches and foundation pits, shoring, strutting, dewatering if

required, slush removing, filling the sides up to original ground level for

rectangular chamber and trench.

CE/HYD/01/2024-25 IT No

172 Providing and laying Cement Concrete M-100 grade 1:3:6 (1 cement: 3 coarse sand

: 6 hand brocken stone aggregate 20mm nominal size ) and curing complete

excluding cost of form work in chamber P.C.C(without forms work) work

complete. .( S.O.R.-2023-24

SOR 24-25 IT-05 PG-01

173 Providing & laying Fly ash Brick masonary having crushing strength not less then

70kg/sq.cm. 1:6 (1 cement : 6 fine sand) with scaffolding, watering, curing etc. 2.94 C.M 4729.83

complete with all labours and materials.various area as directed by incharge .

NO. DESCRIPTION Qty. UNIT AMOUNT

SOR 24-25 IT-16 PG-02

174 Providing 10mm thick Cement Plaster in single coat on brick/concrete walls far

interior plastering up to Floor two level and finished even and smooth in cement 8.00 S.M. 199.28

morter 1:3(1 cement 3 sand various area as directed by incharge) .

SOR 24-25 IT-24 PG-03

175 Providing, fixing M.S Jali frammed work (three piece with handle fitting) on

Opening portion Precast Module Structure for Prevention of Recharge bore well

structure,size including framme, heavy required Angle (40 x 40 x 6mm), flat pati

(25 x 6mm),cuttin

SOR 23-24 IT-98 PG-09

176 Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low Carbon Galvanise)

'V' wire screen pipe of Johnson or approved make ISI including lowering, fixing,

jointing in bore hole as per aquifer depth and pipe assembly given as per site

condition Soil stat

177 Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of approved

Quality (Prince,Suprem,Finolex) with ISI mark including nesessary fittings and

providing as per site sitution and directed by Engineer –in- charge. (

178 Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard for down take /

inlet from Bldg./ Structure to Sand filter Chamber, including piping/ plumbing,

fitting, wall clamping, necessary excavation and filling etc. complete as per site

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 7.00 R.M 325.00

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 20.00 R.M 525.00

179 Providing, supplying, fixing and installing M 300 Grade. precast size 1.5 dia x

2.35 mt. height ,top 75mm thick in 2 half pieces Sand Filteration chamber (2 layer

Type of Precast module )as per Design, Drawing.including necessary excavation,

(a) 1 layer type of Precast module 0.00 NO. 18500.00 -

(b) 2 layer Type of Precast module 2.00 NO. 25000.00

180 Proving & fixing in position Johnson make and equivalent ... 'V' wire L.C.G screen

pipe 1.00 mm size of filter assembly of pair –ID 205mm & OD 217.50mm of

0.5mm slot size and ID 416 mm and OD 428 mm of 1.00mm slot size as per site

(a) 1.0 mt. length. 0.00 SET 7500.00 -

(b) 2.0 mt. Length. 2.00 SET 14000.00

181 Borehole Video photography all the fresh new fresh new bores or few selected as

desired for better understanding & clarity of work undertaken as directed by 2.00 JOB 4000.00

Engineer -in-charge.

182 Supplying water tankers for constant water supply at tube well Compressor work

and cleaning of work site after completion of entire job (testing) inluding cleaning 2.00 JOB 500.00

of mud etc.Location as directed by Engineer-in-charge.

183 Providing and Fixing Recharge Borewell name boards as per standard I.R.C type

design of steel plate including painting lettering etc. complete with fixing in C.C 2.00 No 5006.00

1:4:8 block with necessary excavation.

184 Soil Investigation Test report from Govt.approved authorised laboratary (Prior

inserting bore Pipe) of each bore shall be submitted by Contractor and soil sample EACH

of various starta shall be first collected in Polythene bag and than submitted in BORE

185 Removal of surplus excavated earth of excavated mud-pits and water harvesting

chambers up to the lead of 5.0 km as per the instruction of Engineer In Charge

PARKING SHED & SECURITY CABIN

WORK UP TO PLINTH LEVEL

187 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.Comp. (A)

Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or soft soil

(1) Up to 1.5 Mt. depth 91.30 C.M 123.13

SMC SOR-PAGE NO 1 IT NO

188 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation &

(A) Foundation 9.20 C.M 3095.25

SMC SOR-PAGE NO 1 IT NO

NO. DESCRIPTION Qty. UNIT AMOUNT

189 providing, mixing, placing, compacting by machine vibrator, curing, testing M25

design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding 16.20 C.M 4332.50

cost of reinforcement.-(A) foundation, footing, base of columns and mass concrete

SMC SOR-PAGE NO 14 MIX DESIGN

190 Providing, mixing, placing, compacting by machine vibrator, curing, testing M25

design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement. work in : Upto G.L./P.L.

(2) Having cross sectional area more than 0.085 sq. mt.up to 0.12 sqmt. 8.60 C.M 12930.68

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57 -

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt. 3.10 C.M. 8155.37

SMC SOR-PAGE NO 14 MIX DESIGN

191 Providing & laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone agg.

20 mm nominal size) & curing comp. Includ. cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

(C) Grade slab 174.60 C.M. 3741.69

(SOR SMC Pg No. 9 It No. 95)

192 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work

incl. bending, binding & placing in position etc. comp. Upto G.L./P.L

SMC SOR, ITEM NO.-

193 Providing & construction brick work using Fly Ash bricks having crushing strength

not less than 35 Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1 cement:6 sand )

etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 5.10 C.M. 4441.11

194 Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 120.70 C.M. 136.92

195 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces

at all floor levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1

cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as vertical ( two times ) up

to good quality and size of grain in elevation as per directed by engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR 16.50 S.M 324.00

196 Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry and free from all loose

dirt, chalk, grease, fungi,algae and flaking paint. This can be achieved by brushing

with a wire/ stiff coir brush, followed by water jetting if required. Fill up all minor 16.50 S.M 82.00

cracks and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours.Application of putty is not recommended. Minimum 4-6 hours duration is

required between each coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

WORK ABOVE PLINTH LEVEL

197 Providing, mixing, placing, compacting by machine vibrator, curing, testing M25

Design mix concrete as per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work and rendering but excluding

cost of reinforcement

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 1.30 C.M. 11253.32

(SOR SMC - MIX DESIGN PG. NO-14)

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

NO. DESCRIPTION Qty. UNIT AMOUNT

Ground Floor 2.30 C.M. 8155.37

(SOR SMC - MIX DESIGN PG. NO-14)

(3) Having more than 13 cm. Thickness

Ground Floor 3.30 C.M. 6793.97

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.80 C.M. 9963.33

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 1.40 C.M. 7119.46

(SOR SMC - MIX DESIGN PG. NO-14)

198 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.---

Ground Floor 1231.00 Kg 77.29

199 Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly

Ground Floor 15.20 C.M. 4729.83

First Floor 2.30 C.M. 5018.55

(SOR SMC Pg No. 2 It No. 16)

200 Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 108.00 S.M 249.39

(SOR SMC Pg No. 3 It No. 25)

201 Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru in required proportion etc.

comp. in C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 35.20 S.M 225.34

(SOR SMC Pg No. 3 It No. 24)

202 Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP /

PVC) at junction of brick work and RCC work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete as directed.

Ground floor 7.20 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

203 Providing 20 mm thick double coat mala cement plaster on brick / concrete work

for plastering comprising of base coat 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.

Ground Floor 75.90 S.M 286.10

(SOR SMC Pg No. 3 It No. 27) MR

204 Providing throating or plaster drip and moulding it to R.C.C. chajja etc.comp.. For

Ground Floor 14.90 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

205 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For

all Floor (M.R.)

Ground Floor 14.90 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

206 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and polishing etc. complete.

Ground Floor 26.30 S.M 1019.39

(SOR SMC Pg No.3 It No. 32)

207 Providing and laying polished Kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) and jointed with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

Ground Floor 7.50 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

NO. DESCRIPTION Qty. UNIT AMOUNT

208 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,Jhonson, Nitco,

Somani, Bell, Asian or Euro make in flooring,treads of steps & Landing laid on bed

of 20 mm (Average) base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new

surface or fixing on existing flooring by adhesive material including dismentaling

of existing flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp.Size 24" x 24" For Antiskid tiles

Ground Floor 2.10 S.M 1467.72

(SOR SMC Pg No.4 It No. 43)

209 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and

jointed with white cement slurry.

Ground Floor 7.00 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

210 Providing and constructing sandwitch type Granite stone platform 0.6 mt. wide &

0.75 mt. height, including one end side granite stone (Double Polish) of 1.25 mt.

height & front granite stone patti of 10 cm wide, vertical partitions of half B.M.

wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement

slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors.

Ground Floor 1.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

211 Apply two coats of putty and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other matter and sand papered

(A) for wall and similar surfaces

For all Floors 108.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 35.20 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

212 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 108.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 35.20 S.M 83.36

SMC SOR , coiour works,Pg No.15,item no.-5

213 Providing and applying textured plaster as per design of ICI Dulux or of Asian

paint as per manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including scaffolding, 75.90 S.M 875.00

preparing the surface, watering, curing etc. complete and as directed by the

architects and manufacturers.

SMC APPROVED RATE

214 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per approved

shade & texture, of make incl. Sal wood frames of finished size 12cm x 7cm.incl.

S.S. Hinges with nessary screws & Anodized aluminum fixtures & fastenings For

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 6.30 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

215 Providing and fixing window having extruded aluminium colour anodized section

frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm

(of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm

x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with

sliding shutters of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal

section no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc. complete for window.For all Floors.

(A) Same as above but colour anodized 6.80 S.M 1705.67

NO. DESCRIPTION Qty. UNIT AMOUNT

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.16

216 Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

A) Same as above but Colour anodized 0.60 S.M 1175.56

SMC SOR Alluminium Work ITEM NO.4A,Pg No.16

217 Providing & laying granite slab 18 mm thick in Window-Door seal,Frames Etc

laid on 10 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand) with necessary

adhesive material and finished with flush pointing in white or colour cement,

including rubbing & polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all

For all Floors. 16.50 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

218 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 109.80 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

219 Providing and filling in depressions of Bath and W.C. At all floor levels, after

completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp.For all Floors.

All Floor 1.00 C.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

220 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe

with hooked ends to RCC slabs curing, layig including painting the exposed

portion of loops, all as per standard design complete.

For all Floors. 2.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

221 Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around square or

round bars with round headed bolts & round headed bolts and nuts or by screws

incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 380.00 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

222 (1) The whole work is to be executed through specialized agency with a guarantee

of 10 (Ten) years given on a prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.(b) Laying cement concrete using broken bricks/brick bats

25 mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to IS:2645 ,brick

bats is finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be down

in order and as directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

Terrace and staircabin top 26.30 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

NO. DESCRIPTION Qty. UNIT AMOUNT

(A) Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the floor level for a height

of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer. as per specifications &

instructions of Engineer in charge (Cement consumption 0.316 Bags / S.M.)

For all Floors 16.30 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

223 Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glased tiles of to be laid over cementr morter 1:3 to plain or

slope and to be tempered to bring morter crème out up to surface using white

cement including grounding off jnctions and extending them up to 15 cm along the

wall, clearing with water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 26.30 S.M 779.70

224 Steel work welded in built up sections,frame work including cutting, hoisting,

fixing in position and applying apriming coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with connection plats or angle

cleats as in main and cross beams, hip and trussed purlins connected to common 200.00 Qtl 9108.48

raffers and the like.

SMC SOR-PAGE NO 9 IT NO

225 Painting two coat (excluding priming coat) on new steel and other metal

surface with synthetic enemal paint, burshing to give an even shade including 502.70 S.M. 68.57

cleaning the surface of all dirt, dust and other foreign matters.

SMC SOR-PAGE NO 15 IT NO

226 Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated

sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt

8mm dia with bituman and impet washer filled with white lead etc. Excluding the 487.50 S.M. 999.00

cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR-PAGE NO 9 IT NO

227 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet

class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water pipes. (i) 0.63mm thick

SMC SOR-PAGE NO 10 IT NO 106 MR

WATER SUPPLY & SANITATION

228 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels,

size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Jaquar ,HindWare

For all Floors. 1.00 Nos. 3277.39

SMC sor- Sanitary Items, Page no21, It No.

229 Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x

400 mm at all floor levels, with C.I. or M.S. Brackets painted white incl. cutting

holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Jaquar SLS- WHT -6801 ,HindWare10004

For all Floors. 1.00 Nos 3276.63

SMC sor- Sanitary Items, Page no20, It No.7

230 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs

with C.P.brass screws and washers etc. For all Floor

All Floor 1.00 Nos 859.41

SMC sor Page no7 , It No.72

231 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass

screws complete

Make- Cera F2013101, HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 1.00 Nos 1457.97

SMC sor Sanitary Items,Page no20, It No.

232 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

polished bright etc. comp

Make- Cera F2013151 BIB COCK, HindWare F280002 BIB COCK, Jaquar FLR-

5047 N BIB COCK

NO. DESCRIPTION Qty. UNIT AMOUNT

SMC sor Sanitary Items,Page no20, It No.

233 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels,

polished bright etc. comp

Make- Cera F2013163, HindWare Cat. No.: F530004, Jaquar FLR-5041N 2.00 NO 1828.81

SMC sor Sanitary Items,Page no20, It No.

234 Providing and fixing Towel Ring fabricated from seamless stainless steel tube

2mm thick in bath room with polished wall flange at end of bars with heavy duty

anchor fasteners & accessories

Make- Cera F5014115CH, Jaqua ACN 1121N ,HindWare F880007

For all Floors. 1.00 Nos 924.24

SMC sor Sanitary Items,Page no20,It No.

235 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Jaquar ACN-1131N,HindWare F880011

For all Floors. 1.00 Nos 839.91

SMC sor Sanitary Items,Page no20,It No.

236 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter

with jali of the following nominal diameter of self cleaning design with C.I. scread

down or hinged grating including the cost of cutting and making good the walls.

All floor 1.00 586.27

SMC sor.Page no 8,It No.

237 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type"B") of

Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for soil and waste discharge

system at all floor levels incl. All fixtures like bends, tees,shoe etc. jointed with

resin of approved brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

238 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for rain water at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

SMC sor ,Page no 8, It No. 85 M.R.

239 Providing and fixing in position P.V.C. cowl vent to pipes of prince, suprime, jain

Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

240 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand & manufacture etc. comp. Pipe

shall be fixed on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

SMC sor Page no8 It No. 87 MR

241 Providing and fixing M.S. holder bat clamps at all floor level,of approved design

to C.I. or S.C.I pipes including cost of cutting holes and making good the wall etc.

SMC sor- Page no8, It No. 90 MR

242 Providing and fixing gun metal check or non return full way wheel valve at floor

levels,etc. complete.

SMC sor Page no8,It No.

243 Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in cement mortar

in proportion 1:1 of following nominal internal diameters including testing of pipes

and joints etc. complete.

SMC sor- Page no.7, It No.

NO. DESCRIPTION Qty. UNIT AMOUNT

244 Providing and fixing s.w. Gully trap with C.I. gratting brick masonary chamber

and water tight Pre cast R.C.C.cover of 300mm X 300mm size (inside) including

plastering smooth inside and outside 15 mm thick in C.M 1:3 etc. comp.i) square 1.00 Nos 1098.05

mouth traps (A)300 MM X 300 MM Size - P type.For all Floors.

SMC sor,Page no 7, It No.

245 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight

not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 1.00 NO 958.17

246 Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm Length

SMC sor- Page no6 It No. 64 4.00 NO 101.91

247 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark

water tank of required capacity each with all necessary fittings & connection etc. 1500.00 Lit 3.95

complete on terrace.

SMC SOR- Page no 8, It No.

ELECTRIFICATION WORK OF BUILDING

INTERNAL WIRING

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(5% added For use of ZHFR/HRFR Copper wires in place of FRLS PVC

wires as per SOR)

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

2 (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

(For point wiring in bathroom and W/C and washbasin area in residential quarters

reduce overall rate by 50% of point wiring for light.)

2 Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with accessories erected on

Metal / PVC / wooden box covered covered with appropriate front plate modules

erected on / in wall / ceiling for open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as directed.as per pipe erected with following 2 Pt. 159.08

type of accessories. (5% added For use of ZHFR/HRFR Copper wires in place

of FRLS PVC wires as per SOR)

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for

Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate 149 Pt. 660.69

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (5% added For use of ZHFR/HRFR Copper

wires in place of FRLS PVC wires as per SOR)

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat. III

4 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with following

type of accessories. (5% added For use of ZHFR/HRFR Copper wires in place 14 Pt. 497.37

of FRLS PVC wires as per SOR)

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat. III

NO. DESCRIPTION Qty. UNIT AMOUNT

5 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with following

type of accessories. (5% added For use of ZHFR/HRFR Copper wires in place 17 Pt. 732.81

of FRLS PVC wires as per SOR)

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat. III

6 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / 20 Pt. 253.46

ceiling with following type accessories, Cat. III (5% added For use of

ZHFR/HRFR Copper wires in place of FRLS PVC wires as per SOR)

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires erected in below type of pipe with 6A Modular

type switches and following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed. (5% added For

use of ZHFR/HRFR Copper wires in place of FRLS PVC wires as per SOR)

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete, Cat. III

8 Do as per A.1.

but for 2 nos of 2.5 sq.mm FRLS PVC insulated copper conductor wires with 1 no

1.5 sq.mm FRLS PVC insulated conductor wire (Green color for earthing) for 16 A 0 Pt. 874.00 -

AC starter with universal socket up to satisfaction of E.I.C. (Excluding Main Line,

including 16A AC starter & Socket)

9 Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang, Cat. III 5 Ea. 153.52

[B] For Two Gang, Cat. III 5 Ea. 200.99

(4) TV Co-axial Socket outlet, Cat. III 10 Ea. 153.52

(7) Blank Plate Single, Cat. III 30 Ea. 24.24

(8) Computer RJ-45 socket, Cat. III 5 Ea. 153.52

(19) Modular Indicating Call Bell, Cat.III 5 Ea. 314.11

(20) Modular Buzzer, Cat.III 0 Ea. 143.42 -

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete, Cat. III 2 Ea. 475.71

10 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed.

11 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc. complete of following sizes.

12 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS

with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint

& erected on wall / ceiling of following size .

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 296 Mtr. 59.59

(b) 2 wire 2.5 sq. mm 351 Mtr. 78.78

NO. DESCRIPTION Qty. UNIT AMOUNT

14 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected in /

on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 305 Mtr. 107.06

(d) 3 wire 4 sq. mm 10 Mtr. 136.35

15 Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation.

16 Supplying & erecting approved make Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors &

nos. of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

(2) Two Pairs 50 Mtr. 19.19

(b) Armoured [Jelly Filled]

(1) Ten Pairs 0 Mtr. 120.19 -

(2) Twenty Pairs 0 Mtr. 190.89 -

(3) Fifty Pairs Mtr. 446.42 -

17 Providing & erecting main Distribution (MDF) indoor type, back mounted frame

as per DoT standard approved with krone strips

(a) Suitable for 10 pair 0 Ea. 949.40 -

(b) Suitable for 20 pair 1 Ea. 1311.99

(c) Suitable for 50 pair Ea. 1678.62 -

18 Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or

Heavy duty PVC box erected flushed on wall or concealed in wall with necessary

plastering & finishing as directed of following size.

19 Providing & erecting Switch board for Computer or electric apparatus

consisting of following items in single board erected on PVC / Metal/Wooden

board concealed/open with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 2 Ea. 1081.71

20 Decorative call bell Ting-tong box type 250 volts complete erected 2 Ea. 79.79

L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL

MICRO. BASED LSGD RELEASE MCB , 4 POLE, 25 KA

R Y B INDICATOR

ON OFF INDICATIOR

CHANGE OVER SWITCH 4 Pole 25 KA of IRON CLAD/ METAL CLAD WITH

OPERATING MECHANISM

OUTGOING 63 AMP., 4 POLE

MCB-B CURVE, 10 KA, WITH ON OFF INDICATOR : 6 Nos.

63 AMP., 4 POLE MCB-C CURVE, 10 KA, WITH ON OFF INDICATOR : 1 Nos.

40 AMP., 4 POLE MCB-B CURVE, 10 KA, WITH ON OFF INDICATOR : 1 Nos.

32 AMP., 4 POLE MCB-C CURVE, 10 KA, FOR WATER PUMP WITH ON OFF

INDICATOR : 1 No.

40 AMP., 4 POLE MCB-B/C CURVE, 10 KA, WITH ON OFF INDICATOR : 2 Nos.

32 AMP., 4 POLE MCB-B/C CURVE, 10 KA, FOR WATER PUMP WITH ON OFF

INDICATOR : 2 No.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms

to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(ii)6 way 2 Ea. 582.77

NO. DESCRIPTION Qty. UNIT AMOUNT

(iii)8 way 4 Ea. 1152.41

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation

(b) sheet steel double door

(iii) 8 way 4 Ea. 4025.86

23-A Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. 2 Ea. 6790.43

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

23-B RCCBs, 30 mA, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 6 Ea. 2637.11

24 MCB, 10 KA, 40 Amp., FP, B Curve Cat. III (INCOMER) 4 Ea. 638.32

25 RCCBs, 30 mA, 10 KA, 25 Amp., DP, Cat. III (OUTGOING) 10 Ea. 1969.50

26 MCB single pole 6A to 25A, 10 KA Cat. III (10 Amp)(OUTGOING) 20 Ea. 112.11

27 Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in 2 Ea. 299.97

existing box having following capacity, Cat III, (A) 6 to 32 Amp.

28 Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 5 Ea. 278.76

having following capacity, Cat (III), 6 to 32 Amp.

29 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 2 Ea. 595.90

having following capacity, Cat III, (a) 6 to 32 Amp.

(b) 40 Amp. Cat III, 4 Ea. 668.62

(c) 63 Amp. Cat III, 4 Ea. 737.50

30 Supplying & erecting approved make Electronics Starter and relay for air

conditioners in ABS plastic moulded housing. Company fabricated with bakelite

terminal for connection with silver coating bimetallic contact in switching device

for o/p with following features.

(1) Low Voltage Protection below 130 V

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time chara-

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

31 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos.

32 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos.

33 Sheets steel powder coated enclosure suitable for incorporating One/Two nos.

34 Providing and erecting metallic vitrified danger notice board as per language

suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected 1 Ea. 69.69

as per IS-2551.

35 Providing & erecting Medium Voltage Danger Notice Board sticker as per

language suggested by engineer incharge of standard size as per IS-2551

36 providng and erecting Approved make single phase electronic energy meter

rating 5A/20A/40A based on ASIC (Application Specific integral circuit) digital

technology with accuracy Class-I, temper proof, free from effect of external

magnetic field with phase, earth, reverse and impulse indications, 6 digit electro- 0 Ea. 1738.21 -

mechanical counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in

robust enclosure complete to be erected as directed with 3 year replacement

guarantee. Cat. III

providng and erecting Approved make energy meter 3 phase 4 wire unbalanced

load rating, 10A to 60 Amp. based on ASIC(Application specific Integral

Circuits) digital technology with accuracy Class - 1 , temper proof, free from effect

of external magnetic field with 3 phase indication, earth & impulse indication,

digit electro mechanical impulse counter, suitable work on 120 V to 300V per

phase 45-55 HZ, housed in robust enclosure with erection as directed. Cat. III

INDOOR LIGHTING ITEM

NO. DESCRIPTION Qty. UNIT AMOUNT

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet, Cat. III 0 Ea. 165.64 -

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 16 Ea. 295.93

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 23 Ea. 373.70

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet,Cat. III 47 Ea. 535.30

39 Supplying and erecting LED lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder, Cat. III

(i) 2 to 3 watts 0 Ea. 69.69 -

(ii) 5 to 8 watts 28 Ea. 112.11

40 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV, Cat. III 0 Ea. 427.23 -

(iii) 16-20 watts, Surge-2 KV, Cat. III 0 Ea. 589.84 -

(iv) 22-24 watts, Surge-2 KV, Cat. III 0 Ea. 758.51 -

(B) LED Panel Light with provision for Plane front frame with translucent cover

fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, Cat. III 20 Ea. 1794.77

40-A Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. 4 Ea. 7266.75

(iv) above 90 to 120 watts

(v) above 120 to 160 watts 27 Ea. 8453.70

41 Supplying and Erecting Of L.E.D. type High bay fixture having Power

Consumption of following watts with, Input Voltage 110 - 290 V.AC with full

efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver used for

maximum power saving, Best Quality luminium alloy housing and aluminium

Dome for etter heat dissipation, CCT Cool white (6000K), CRI 80, Beam angle >

120 dgrees, working temperature -20 degc to +55 degc, Body IP

FAN AND RELEATED ITEM

NO. DESCRIPTION Qty. UNIT AMOUNT

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding, Power factor not <

0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible with

electronic regulator unit for Speed Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for

140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[

Make shall be approved by Engineer in Charge]

(A) 1200 mm Sweep (48")

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy & 30 cm.

down rod erected with earthing.(Make shall be approved by Engineer in charge))

43 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

rod erected duly painted for fan complete with proper insulation without leakage 87 Mtr. 108.07

44 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box

/ Heavy Duty PVC box complete erected concealed in Ceiling with necessary

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 29 Ea. 18.18

46 Supplying & erecting single phase approved make industrial exhaust fan suitable

for medium duty ring mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM, Cat. III 9 Ea 2054.34

47 Providing suitable M.S. louver shutter of the Exhaust fan. 0 Ea. 368.65 -

48 Supplying & erecting electro galvanised G.I. wire micro mesh jali cover of grade

304 required size with suitable wooden frame duly fitted in wall outside of exhaust 0 Sq. Mtr 634.28 -

fan for insect protection.

49 Providing & erecting fresh air fan 250 mm dia with square frame make of ABS

body with louvers, Cat. III

50 Supplying and erecting approved make oscillating type medium duty bracket fan

with Aluminium Blades A.C. 23OV. 50cy/s, with thermal overload protection wall

mounted with height adjustment and rotary tilting device complete with guard, pull

cord for speed and oscillation flexible Core plug top complete erected with lead

wires as directed.

EARTHING SYSTEM

Providing and erecting required size HOT deep Galvanised iron strip for earthing

of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

52 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 5 Kg. 794.87

53 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 5 Kg. 77.77

54 For using salt and charcoal / coke as required for pipe type earthing. 20 Ea. 171.70

55 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate including value of earth

resistane of installation.

[B] For Electrical installation up to 11 KV located in other than normal soil i.e.

Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr 4 Ea. 7095.25

-Back filling Compound :1 no. Bag of 25 Kg. two for body earth and one for

[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft

Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

CABLES, WIRE AND TERMINATIONS

NO. DESCRIPTION Qty. UNIT AMOUNT

56 Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the surface 50 Mtr. 46.46

as normal ground.

57 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground

across the road crossing or on floor with necessary material in an approved manner 0 Mtr. 226.24 -

and making the ground as per original. (F) 100 mm dia.

58 Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable, (A)50 mm outer dia

59 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cables.

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 30 Mtr. 1345.32

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm 0 Mtr. 269.67 -

(B) 4 core 4 Sq. mm 30 Mtr. 362.59

(C) 4 core 6 Sq. mm 0 Mtr. 508.03 -

61 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm 10 Mtr. 673.67

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cables.

(B) 4 core 16 Sq. mm 20 Mtr. 984.75

63 Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm

64 Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape etc

for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm 2 Ea. 33.33

(B) 2 to 4 core 6 Sq. mm 10 Ea. 38.38

(C) 2 to 4 core 10 Sq. mm 10 Ea. 43.43

(D) 2 to 4 core 16 Sq. mm 10 Ea. 54.54

(E) 2 to 4 core 25 Sq. mm 10 Ea. 59.59

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

65 Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

66 Supplying & erecting approved make LAN cable of following size in existing pipe

as per direction [C] CAT -

WATER COOLER AND PURIFIER

Providing and erecting water cooler having storage capacity 80Ltr. & cooling

capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚ C within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit, water tank surrounded

by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

68 SITC of Water Purifire Eureka Forbs Make AG 200 or Equivalent 0 Ea. 11615.00 -

NO. DESCRIPTION Qty. UNIT AMOUNT

69 Supplying & erecting bank of all polypropylene condenser (APP type) with

standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of P.F. correction for

operation on 3 phase 50 c/s, 400 /440V (+ / - 10%) with externally discharging

resistance, earthing terminal & built on angle iron of channel iron frame work and

provided with terminal cover box. Complete erected on provided iron bracket or on

floor duly tested by license.

PUMP SETS AND STARTERS

70 Providing & erecting open well type horizontal mono block pump set with

stainless steel body having following specification.

(D) 1 HP Three phase open well motor pump set suitable for 190 LPM discharge

@ 21 mtr. head, suitable for 32mm dia. delivery pipe.

71 [B] For 2 HP 3 phase open well horizontal mono block pump set suitable for

LPM @ 25 mtr head suitable for 50 mm dia delivery pipe

72 Supplying submersible pump set suitable for bore of 100 mm. dia. or more

having three phase motor capacity not more than 3 H.P. of different range with

following capacity

(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs. Respectively head

suitable for 50 mm dia. delivery pipe, Cat. III

73 Supplying & erecting approved make self-priming domestic monoblock water

pump with 1 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and following discharge

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery. Cat.III 2 Ea. 7679.03

74 Supplying and erecting Direct On-line Electronics Starter with 2-5/4-10/8-14/10-

16 Amp. Rating relay (variable current setting) directly operated in totally

insulated elegant enclosure and 18 Amp. Rating power relay with start - stop

button for single phase operation up to 3 HP as per complete erected on P.W.

Block with following features. 3 Ea. 1603.88

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

75 Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and

with 4-14A. range, directly operated thermal overload relay in sheet steel enclosure

for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected on P.W. Block

with necessary connection. Cat.III

76 Supplying & erecting approved make Automatic liquid level controller 6A. with

sensor testing as per instruction of Engineer in charge on site complete with wiring

connection with existing wires , with copper conductor from pump to upper and

77 Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp.

Plug socket, company fabricated powder coated sheet steel enclosure erected as

directed with connection.

[A] Metal Clad Socket with metal clad top. Cat.III 0 Ea. 527.22 -

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III 0 Ea. 660.54 -

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled

diesel engine with multi-cylinders developing suitable BHP not less than following

capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard

accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty

fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure

gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw

drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil

filter, 12 / 24 volts electric starting equipment complete with standard heavy duty

battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc

and heavy duty Residential type exhaust silencer and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length,

standard wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation system,

capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz,

wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation

+/- 5% of rated voltage from no load to full load. Both the engine and alternator

fitted on a common fabricated steel base plate with antivibration mounting engine

and alternator both connected to each other by flexible flange coupling and with

floor/wall mounted control panel box comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate capacity,

NO. DESCRIPTION Qty. UNIT AMOUNT

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be

connected with provided suitable capacity armoured cable and complete with

Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing

material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU

Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from

inside the canopy by perforated sheet with 3/4 mm holes, sound level not more

than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning

and satisfactory testing as per requirement with first filling of fuel, oil, etc. with

guarantee / Warrantee of complete system for Two years. & with obtaining all

necessary certificate from Electrical Inspector. The Capacity and Ratings of DG

sets are as below.

(H) Continuous Rating of 50 KVA ,BHP not less than 65.8 BHP 0 Each 524003.15 -

(I) Continuous Rating of 62.5 KVA ,BHP not less than 76 BHP 0 Each 541293.34 -

Providing & erecting approved make AMF control panel suitable for following

size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as

detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains

& generator) Overload relay for generator contactor Neutral contactor for mains

and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor

Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of

suitable rating for auto/manual operation. Auto/manual switch. Emergency stop

push buttons. Manual start push button. frequency meter. Engine hour meter. Two

earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil

pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set 0 Each 97320.57 -

INVERTOR STABILIZER

80 Supplying and erecting of 1850VA Sine wave Digital Inverter systems. 0 Ea. 13763.08 -

Supplying and erecting of 12V/150AH Tubular battery for 1 hrs battery backup. 0 Ea. 17747.75 -

82 Supplying and erecting approved make online Un-interruptible Power Supply

system comprising flat cum-boost charger, static Inverter & sealed maintenance

free SMF batteries. The charger having operating capacity for input 160-270V AC

& inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery,

over/under voltage output with over load & short circuit protection equipment. The Ea. 24822.77 -

system housed in CRC sheet duly powder coated paint with following power

backup.with MS painted batteries stand, 10% Overload capacity for momentary

load. (FOR class room)

(A) 1 KVA with 1Hr Backup

(B) 2KVA with 1Hr Backup 0 Ea. 47268.00 -

(C) 3 KVA with 1Hr Backup 0 Ea. 81810.00 -

(D) 5 KVA with 1Hr Backup 0 Ea. 128270.00 -

83 Wall Mount Speaker

SETC of Philips/Ahuja Make or equivalent

High power ABS wall mounting box speaker in gray colour for indoor public

address and background music in locations of high ambient noise. Ideal for

Input Power : 25W RMS 0 Ea. 2152.19 -

Power Tapes on 100V : 25/15/10/5W

Impedance : 400/670/1k/2kΩ

Frequency Response : 120-15,000Hz

SPL at 1kHZ (1W/1m) : 94dB

NO. DESCRIPTION Qty. UNIT AMOUNT

SETC of Philips/Ahuja Make or equivalent

High Wattage PA Mixer Amplifier

6 Mic & 2 Aux Inputs.

Preamplifier and Line Output for connecting to a Booster Amplifier and for

recording the programme.

Line Input for connecting the output from any external mixer or permitting to be

used as a Booster Power Amplifier.

Resettable circuit breaker for protection against overload and short circuit.

Instant transfer to DC power (Car Battery) if AC power fails.

Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit

position for safer operation of driver units.

Power Output : 300W Max., 250W RMS at 10% THD, 220W RMS at 5% THD,

200W RMS at 2% THD

Output Regulation : ≤ 2 dB, no load to full load at 1kHz

Input Channels : 6 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ, 1 × Line

Frequency Response : 50-15,000Hz ±3dB

Signal to Noise Ratio : 60dB

Tone Controls : Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz

Outputs : Preamp 200mV/600Ω, Line 1V/1kΩ

Speaker Outputs : 4Ω, 8Ω, 70V & 100V

Digital Player : MP3 Player with USB, SD and MMC Card Reader

Power Supply : AC: 220-240V 50/60Hz

Power Consumption : AC: 460VA DC: 6A

84 Unidirectional Dynamic Microphone

SETC of Philips/Ahuja Make or equivalent

Multi Purpose Applications

All purpose PA microphone reproducing intelligible, crisp and a bright sound

Suitable for multi-purpose PA installations.

Supplied with quick detachable holder with 3-pin professional XLR connector & 6 0 Ea. 3037.95 -

mtrs. twin core shielded low noise cable.

Frequency Response : 50-15,000Hz

Sensitivity : 2.2mV/Pa

Impedance : 500Ω

85 PA MICROPHONE STAND

SETC of Philips/Ahuja Make or equivalent Microphone stand employ sturdy

mechanism ensuring trouble free movement and positioning of microphone. These

stands are functional and resistant to rust, due to superior quality of chrome

plating/powder coating. stand with 5/8” 27 TPI to match all MICROPHONES.

Type : Floor Stand

Height : 920-1500 mm

Base Dia : 230 mm

Weight : 4.60kg

86 Speaker Wire (Copper)

SETC of 1.5 Sq.mm. 2 Core Oxygen free Copper Speaker Cable 0 Mtr. 126.27 -

87 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed. (a)20 mm

FIRE SAFETY EQUIPMENTS

88 Supplying stand first AID box with antiseptic cream, medicine for use on wounds

due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-

aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or

similar) etc. (All above contents shall be of standard makes)

89 Supplying and erecting floor mounting stand for keeping four nos. of FIRE

buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm

X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and 10 Ea. 1111.00

duly painted with one coat of red lead and two coats of approved enamelled silver

90 Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge

G.I. sheet with extra handle at bottom duly painted white inside and Red out side

with FIRE mark, filled with dry-sand and kept on existing stand provided or hung

91 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts 10 Ea. 7777.00

grouted in wall complete. [A] For 4.5 Kg Capacity

92 Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as

per IS 13849 or 1 Kg capacity with necessary clamp for erection on wall

NO. DESCRIPTION Qty. UNIT AMOUNT

93 4/5/6 Passengers, Ground plus 2 upper floors with Rated Speed of 1.0 m/sec. (C)

With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. 0 Ea. 1235286.56 -

OUTDOOR LIGHTING ITEM

94 Supply of approved make frp/grp pole having Overall Length of 6.0 meter 8 Nos. 14026.88

95 Providing FRP/GRP arm bracket 8 Nos. 1569.54

96 Suppliung & Erecting of Single arm bracket length 1 mtr. B Class G.I. Pipe 10 Nos. 1586.00

97 Providing 1:2:4 cement concrete foundation 8 Nos. 667.41

98 Providing and, fixing heavy duty flange type brass cable gland 16 Nos. 30.40

99 Solder less crimping type Aluminium lugs 56 Nos. 4.24

100 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV of following size of cables (b) 4 core 6 Sq. mm

101 Providing & laying approved make Double walled corrugated pipes (DWC) of (A)50 mm

102 Making trench in soft soil of suitable width of 90 cms deep 150 Mtr. 38.18

103 Supplying & erecting Flexible PVC insulated multistrand multicore 1.1 KV grade ISI

marked Copper Wires of following Size to be erected as directed. h) 2.5 Sq.mm 3 core 132 Mtr. 60.10

round PVC sheathed

104 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with 22 Nos. 222.71

ISI Mark Cat.III

105 Supplying and erecting LED street light / Flood light fittings (B) Flood Light (IP-65), (iv)

above 90 to 120 watts Cat-lll

106 Painting the number and words for (st.light pole numbering and back ground of colour as

107 Providing & Erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised

iron pipe 8 SWG earth wire with using salt and charcoal / coke as required for pipe type 8 Nos. 445.41

108 Supplying & erecting approved make SMC press moulded composite FRP. box. (B)

250mm x 200mm x 100mm [deep]