6560/EE-E/NKDA/2025-26

Amount

Partition of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size (40 mm x 25 mm): In Ground Floor 12mm thick

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment Make- PWD Approved 2 Way

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.:6-32 A, DP (Legrand)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required,(a) (iii)2 x 56/0.3 (4 sqmm) + 1x 36/0.3(2.5 sqmm) ECC

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages,(iii) No. 8 SWG

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (ii) With 25x25x3mm angle iron support 300x50x1.25mm (18SWG)

Laying of cable as below, on existing Cable Tray and binding withsuitable size GI wire upto 50 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 2 core 4 sqmm cable

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment . 4 Way

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection .32A DP MCB--Legrand

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.Make- Legrand 6-32 A SP MCB

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting,

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 4 sqmm cable

S/F Ms loop Box (10SWG) of size 10.3/4''x8.3''/4x5'' (269mmx219mmx125mm) having almirah type cover complete with special type arrangement including S/F 8''x6''x1/4''(200mmx150mmx6mm)bakelite sheet 1 no. 4-way ebonit connector block,1 no 15Amp fuse unit fitted inside the box and suitable size danger board riveted on cover of the box outside & fixing the box with pole by means of M. S Clamp of 1''x1/4'' (25mmx6mm)of suitable length and encasing the box by 1:3:6 cement concrete with graded stone chip (3/4''down). The depth of the concrete should be 60cmx54cmx54cm including plastering and neat cementing and S/F 2 Nos. compressing gland of suitable size and making all necessary connection as reqd.

Supply and delivery at site of following cable 1.1 Kv 4 core x 4 sq mm grade PVC/XLPE Unarmored Al. conductor(LP) cable, conforming IS : 7098(Part 1) 1988 .

Supply and delivery at site of following cable 1.1 Kv 2 core x 4 sq mm grade PVC/XLPE Unarmored Al. conductor(LP) cable, conforming IS : 7098(Part 1) 1988 Make: Havells/ Polycab /KEI or Similar as per EIC.

Supply , fitting & fixing of 35watt, energy saving and environmental friendly, 200-240V, die cast aluminium body LED well glass post top light 30/35 watt , efficiency >90%, not less than IK 08, Havlls make

Supply , fitting & fixing of 35watt, energy saving and environmental friendly, 200-240V, die cast aluminium body LED Street light, IP65/66, CDL, 5700-6000K, vertical , thermal manegement, efficiency >90%, not less than IK 08,

P.S. ENTERPRISE (BID ID -6847130)

RELIABLE CONSTRUCTIONS (BID ID -6861571)