Repairs and renovation works to yard toilets - phase - III

Half brick masonry with common burnt clay F.P.S. (non modular) FALGY bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work including all materials & men etc., complete

Providing 12 mm thick cement plastering in CM (1:6) on brick work / RR wall / Concrete surfaces including scaffolding and including cost of cement etc., complete all as directed.

Apply two coats of premium quality arcylic Interior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., complete. (Rate includes scrapping of old surface by mechanically)

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.

Providing two(2) coats of synthetic enamel paint for doors and windows etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying putty and prime coat complete all as directed

Providing and fixing 1st quality anti-skid floor tiles in toilets & wash rooms of 10mm thick conforming to IS : 15622, of approved make like SOMANI / KAJARIA / RAK, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) & all materials complete all as directed.

Providing and fixing 1st quality 8 mm thick Ceramic Glazed tiles in skirting & dado of 10mm thick and conforming to IS : 15622, of edgecutapproved make like SOMANI / KAJARIA / RAK, in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade. Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) & all materials complete all as directed.

Supply, fit and fix white glazed earthenware European type water closest of parryware or Hindustan make no.225/226 or other approved equivalent make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat and cover with low level slimline polymer cistern of 10 litres capacity with anti microbial front knob of parryware make no.8090/8091 or other approved epuivalent as specified all fittings materials, tools and labour.

Providing and fixing hand shower (HEALTH FAUCET) (ABS body) with 8mm dia, 1 Meter long flexible tube & wall hook of Water tek make or its equivalent make complete all as directed.

Supply and providing Urinal basin of make CERA or its equivalent including necessary fittings etc., complete all as directed.

Supply and providing Urinal Partition of make CERA or its equivalent including necessary fittings etc., complete all as directed.

Providing and fixing PVC door with frame with inclusive of necessary screw fittings, aldrop, tower bolt etc., (Rate includes removal of old damaged wooden doors and handed over to servicable material to CE dept.,) complete all as directed.

Supply and fix 15mm dia PVC Bib cock of approved make Water tec or equivalent complete all as directed.

Supplying, fitting and glazed vitreous china wash basin 550X400mm Size of Parryware / Hindware / jaquar make with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap, 32mm dia Chromium plated heavy duty approved waste fittings, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, all materials, tools, plant and labour complete all as directed.

Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete

Providing 2 peg, SS coat hooks of standard quality etc., complete

Supply & Fixing 15 mm dia stop cocks of standrad quality with approved make confirming to IS:8931 and Complete all as directed.

Providing and fixing PTMT soap Dish Holder of approved make Water tec or its equivalent having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., complete

Providing and fixig PVC Floor trap with gratings complete all as directed.

Providing and fixing 15 mm nominal dia Pipes UPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 20 mm nominal dia Pipes UPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

Providing and fixing 25 mm nominal dia Pipes UPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Supply and fix PVC 32mm dia waste pipe for Urinal / Wash basin etc., complete all as directed.

Supply of 110 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply of 110 mm dia UPVC(SWR) rain water downtake pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) and removing of old pipe line and handover to disposal section etc., complete

Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply, fitting and fixing 32 mm nominal dia in position galvanised steel (Heavy duty) distribution pipes (of make Jindal / Zenith or equivalent) of the following sizes conforming to IS: 1239 at all heights and depths above and below plinth level including necessary galvanised steel fittings such as bends, elbows, tees, plugs, sockets, short pieces, clamps etc., and testing of the pipe lines hydraulically, all as per drawings, specifications and directions of the engineer, complete all materials, tools, and labour all as directed(TATA,JINDAL,ZENIT MAKES)

Supply, fitting and fixing tested heavy duty 32 mm nominal dia (10 kg/sq cm) gun metal fullway gate valve of approved make & specifications and directions of the engineer, all materials, tools, and labour complete in all respect.

Providing and fixing PVC Shower rose with 15 or 20mm inlet inlcuding all connections and accessories complete all as directed.

Supply and Providing Nito Bond SBR of Fosroc make as per manufacturer instructions and suggested mix proportions at required places as directed by Engineer-in-charge

Apply two coats of premium quality weather proofing arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (apex ultima), Berger (All guard) where ever specified by Engineer after through scrapping & cleaning of old surface including necessary scaffolding etc., complete. (Rate includes scrapping of old surface by mechanically)

Supply and fixing PVC Syntex water tank (Reno) of 2000 Ltrs including necessary fittings etc., complete all as directed.

Cleaning of Septic tank and manhole chambers & drain etc., and disposal of debris outside HSL premises as directed by Engineer-in-charge

Supply and Providing 100mm dia PVC Vent Cowl complete all as directed.

Removing of damaged GI Pipe line, Supply and laying 32mm dia Medium Grade GI pipe line, make of Jindal / Senith or equivalent approved make, confirming to relevant BIS standards including necessary fittings and clamps for existing toilets, over head tanks, including cutting and making good the wals etc., complete all as directed.

Cutting of trunks and branches of trees upto 600 mm girth and disposal of unserviceable material out side the HSL premises.

Clearing of Rank Vegetation and dispose the material to outside the yard

Construction of Brick wall with good quality modular bricks of class designation 12.5 with CM 1:6 including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) Complete .

Providing 40mm thick PCC 1:2:4 mix (20mm aggregate) flooring finished with a floating coat of neat cement finish including cement slurry complete all as directed.

Supply & Fixing of pre coated, Trapezoidal profiled Galvalume Roofing sheets (the Size, shape and pitch for roof sheet as approved by Engineer-in-charge), 0.50mm total coated thickness (TCT) Zinc Alluminium alloy coating AZ 150 as per IS:277/ASTM 1379 in 550 Mpa steel grade, painted with Silicon Modified Polyster 18-22 microns on top 5-8 microns Epoxy primer at bottom side of the sheet. The sheet shall be fixed using self drilling/self tapping screws @ 500MM c/c along the length of purlins and where ever specified by engineer of size (5.5X55mm) with EPDM seal of make CORRO SHIELD /BUILTEX/ HILTI. (quoted rate shall include for side and laps, tape sealer and end closure)

Structural steel work using MS pipes, angles, plates in ladders, trussess, brackets etc, including cutting, fabrication, hoisting, fixing in position. Quoted rate inclusive of all materials and consumables etc., complete

Providing stainless steel(A ISI 304-18/8) kitchen sinks (Nirali / Anjali make) of bowl size 610x460x230 mm (as per IS:13983)with CI brackets and 40mm dia stainless steel plug incliding painting to fittings and Cutting & making good the wall surfaces where ever required..

Supply and fix Gun Metal Gate Valves in the existing supply lines / mains Zoloto or equivalent approved make in buildings. Toilets, over head tanks etc.,25mm dia GI gate valve

Supply and fix 50mm thick RCC (1:2:4) precast jollies including cost of cement and other materials complete all as directed.

Supply and fix 32mm thick Door shutters of make KALPATHARU or its equivalent (One side decorative and other side non decorative) including necessary SS fittings, Butt hihges, tower bolts and Aldrop etc., complete all as directed.

Supply, wrought & Replacement of wood work as in scantling for Doors and windows using sal wood / Nall maddi complete all as directed.

Providing and fixing UPVC connetions pipes complete all as directed.

Cleaning of floor tiles, wall tiles, comods, Wash basins, taps etc., with Acid or its equivalent material complete all as directed (After completion of cleaning matching grouting putty is applied to entire toilet room tiles is in contractor scope)

Providing Indian type Comod (IWC) of approved make CERA or its equivalne, including 10 Ltrs Flus Tank and necessary connections etc., after removal the old damaged IWC / EWC and dispose the same to outside the yard, and make it good with cement concrete or Cement mortar complete all as directed.

Supply and fixing of Angle cock of approved make complete all as directed.

Dismantling of exisitng damaged RCC slab and water tank and dispose the useful material scrap yard.

Providing RCC slab with 1:2:4 grade of concrete with good finishing, curing etc., incuding cost of cement, labour etc., complete all as directed.

Supply and fixing leak proof cenering and shuttering to sunshade etc., inposition during concreting and removal of the same in position after specified period all complete and as directed by the engineer incharge.

Supply, cutting beanding and tieing of Fe415 grade HSD bar reinforcemen for slab etc., complete all as directed.

Chipping of exisitng damaged daddoing and plastering with 12mm thick with CM (1:6) complete all as directed.

Providing RCC sunshade with 1:2:4 (20mm grade) including necessary shuttering, cement, labour etc., complete all as directed.

Drilling of 20mm dia, 200mm deep holes into the stone masonry wall / RCC structures / Slab etc., using mechanically operated hammer drilled diamond core cutting machine including grouting LOCK FIX or FOSROC make or its equivalent complete all as directed.

Supply and fix 40x4mm size Hold fasts including grouting with PCC (1:2:4) concrete co mplete all as directed.

Providing RCC Precase slabs with 1:2:4 (20mm grade) including necessary shuttering, cement, labour etc., complete all as directed.

Disposal of surplus soils, debris, by mechanical means to a lead of 3KM to outside the yard, complete all as directed

Providing Hardstanding with PCC 1:2:4 including material etc., complete all as directed.

Providing and fixing of 10 Ltrs capacity PVC Low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231 with complete all as directed.

Repair and fixing the existing 10 Litres capacity PVC low level flushing cistern with manually controlled device (Handle lever)

Supply and fix 15mm dia PVC Pillar cock of make Water tek or equivalent complete all as directed.

SAMANTHA STEEL FABRICATION GENERAL ENGINEERING WORKS