CERTAIN REPAIR INTERNAL ELECTRIFICATION INCLUDING GATE LIGHT ETC IN OFFRS AND TECH AREA AT AF STATION HALWARA

Amount

Taking down aluminium / copper point wiring with surface/ concealed stove enamelled steel/ PVC conduit or wooden batten ( light, fan, socket, or power ) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete.

M & L for concealed Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit not less than 19/20 mm dia with all fittings shunk in MS Pressed steel terminal boxessuitable depth and 1.6mm thick (duly painted with two coat of anticorrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete all as specified.

All as per item No. 2 above but for ceiling Fan point one point controlled by one switch.

All as per item No. 2 above but for Exhaust Fan point, one point controlled by one switch.

All as per item No. 2 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 2 above but for One socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 2 above but for call bell point, one point controlled by one switch.

All as per item No. 2 above but with two run of 2.5 sqmm for one 15 Amps socket outlet on independent board and one run of 1.5 Sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

M&L for existing concealed conduit point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in existing PVC/ERW steel conduit with all fittings shunk in MS Pressed steel terminal box suitable depth and 1.6mm thick (duly painted with two coat of anticorrosive paint outside and aluminium paint inside) with top cover 2.8mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete all as specified.

All as per item No. 9 above but with ceiling fan, one point controlled by one switch.

All as per item No. 9 above but for Exhaust Fan point, one point controlled by one switch.

All as per item No. 9 above but for One socket outlet 5 Amps controlled by one switch on same board.

All as per item No. 9 above but for One socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 9 above but for call bell point, one point controlled by one switch.

All as per item No.9 above but with 2.5 Sqmm for one 15Amps socket outlet on independent board and 1.5 Sqmm PVC insulated multistranded copper conductor cable as continuous earth wire complete.

M&L for surface point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 sqmm multi stranded copper conductor cable as continuous earth wire drawn in surface PVC conduit/PVC casing & caping with PVC gang box suitable ways fixing on wall with all fittings/accessories for mounting of switches/sockets and fan regulators etc complete all as specified.

All as per item No. 16 above but for ceiling Fan point one point controlled by one switch.

All as per item No. 16 above but for Exhaust Fan point, one point controlled by one switch.

All as per item No. 16 above but for One socket outlet 5 Amps controlled by one switch on same board.

All as per item No.16 above but for One socket outlet 5 Amps controlled by one switch on independent board.

All as per item No.16 above but for call bell point, one point controlled by one switch.

All as per item No.16 above but with 2.5Sqmm for one 15 Amps socket outlet on independent board and 1.5sqmm PVC insulated multistranded copper conductor cable as continuous earth wire complete.

Supply and fixing switch piano type one way 5 Amps 240 volts complete.

Supply and fixing bell push flush type 5Amps 240 volts complete.

Supply and fixing Socket outlet 5 pin 5 amps flush type complete.

Supply and fixing for switch piano flush button single pole one way 15Amps 240 volts complete.

Supply and fix for socket out let 2 in 1,6 pin, 5 and 15 amps multi purpose flush type, 230 volts.

Supply and fixing electronic fan regulator step, 250V flush type on the existing phenolic laminated sheet etc.

M&L for concealed point wiring (MODULAR FITTING) for light point controlled by one switch with 1.5 Sqmm PVC FRLS, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable confirming to IS-694 and FRLS,ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, drawn through in and including rigid PVC conduit of suitable size, with all fittings, ISI marked and accessories including modular sunken/terminal boxes for modular wiring, mild steel sheet recessed in wall including modular white cover with frame with a coat of black bituminous paint and suitable for fixing of switches/ sockets etc, complete including cutting/chasing and making good wall/ceiling surfaces complete all as specified and as directed. Note: Cost of cutting of chases wherever required in walls/floors and making good the same, is deemed to be included in the quoted unit rate of point wiring.

All as per item No.29 above but with ceilling fan point, one point controlled by one switch.

All as per item No.29 above but with Exhaust Fan point, one point controlled by one switch.

All as per item No.29 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No.29 above but for One socket outlet 5 Amps controlled by one switch on independent board.

All as per item No.29 above but for call bell point, one point controlled by one switch.

All as per item No.29 above but with two run of 2.5 sqmm for one 15 Amps socket outlet on independent board and one run of 1.5 Sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

Supply and fixing modular switch flush type, one way 5 Amps ISI marked complete.

Supply and fix modular Bell push, flush type, 5 Amps ISI marked complete.

Supply and fix for socket out let 2 in 1,6 pin, 5 and 15 amps multi purpose flush type, 230 volts.

Supply and fix modular switch 15 Amps flush type ISI marked complete.

Supply and fix for socket out let 2 in 1,6 pin, 6 and 16 amps ISI marked complete.

Supply and fix Modular electronic fan regulator 2 module, 240 volt complete.

Supply and fixing ceiling rose surface bakelite 3 terminals.

Supply & fixing lamp holder PVC/Polycarbonate insulated body with back plate for angle/batten fittings complete.

LED light fitting, 20W, 4 ft long 230V, wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired as in replacement complete all as specified.

Supply and fixing recess mounting LED slim ceiling light with extruded aluminium housing and milky diffuser with 36W, 2'x2'(595x595x11mm) LED slim panel complete all as specfied.

Supply and fixing LED mirror light fittings 1 feet long 5 watt LED batten (cool Day light) light for mirror and as wall light application complete.

Supply and Fixing LED light fitting 2 feet long 10 watt LED batten (cool Day light) light for mirror and as wall light application complete.

Supply and fixing LED panel, slim surface mounting round LED panel 10 watt, size of 192mm dia roung, aluminium die cast body with premium diffuser to ensure glare free (Day Cool) and complete.

Supply and fixing LED flat bulkhead fitting 10 watt complete and fixing to wall/ceiling including fixing arrangement with clamps/scrue/nuts/bolts/washers etc and connecting complete.

Supply and fixing of building security light fittings 25W LED new generation energy saving & enviroment friendly long life versatile pressure die-cast aluminium IP-66 roadwayluminars with high power LEDs as light source and electronic drive including connecting complete.

Supply and fix in security light mounting bracket, GI pipe 25mm dia medium grade for mounting bracket bent to shape 1.00 meter length and fixing arrangement with two nos of MS clamps set, nut, bolts, washers, and applying two coats of aluminium paints over one coat of Zinc oxide primer complete all as directed.

Supply and replacement of MS sheet 1.00mm thick, louver shutter for exhaust fan suitable size for up to 350mm sweep with all accessories, fixing on wall complete all as directed.

Supply and replacement of MS sheet 1.00mm thick, louver shutter for exhaust fan suitable size for 350mm to 450mm sweep with all accessories, fixing on wall complete all as directed.

S&F decorative post top light fitting made up of high grade unbreakable polycarbonate material suitable for retroft CFL/LED lamp B22 base prism for 360 degree in direct LED light fitting without lamp including fixing arregement materials and suitable size/lenght electric cable complete.

M&L and fixing for decorative LED gate light 40 watt, made up of high grade unbreakable polycarbonate material suitable for mounting on pipe dia 40/50mm including conecting and fixing on post top with necessary fixing arrangement complete all as directed.

Flexible cord copper conductor of size 1.00 Sqmm, twin core, flat cable for connection to light fitting/fans from ceiling roses complete as in repair all as specified.

M&L for sub main wiring with two single core PVC insulated cable of size 2x4.0Sqmm+1x4.0Sqmm earth wire multi stranded copper conductor drawing into and including heavy duty 25mm dia surface PVC conduit and continous earth wire complete and making good disturbed surfaces of wall/floor etc.

All as per item No.57 above but sub main wiring of size 2x6Sqmm+1x6.0Sqmm as earth wire.

Supply and fix sheet metal enclosure with metal clad socket & plug top and MCB single pole neutral 20Amps complete all as specified and directed.

S&F in POLYCARBONATE THERMOPLASTIC ENCLOSURE (Electric meter box) which should be UV resistance in accordance with IEC 61439-1,clause 10.2.4: The board should be anti-acid & anti corrosive, Degree of protection against mechanical load should be IK08 (5 joule) in accordance with IEC62262. The manufacturer of board shall submit a copy of CPRI Test report in Polycarbonate of Degree of Ingress Protection IP65 in accordance with IEC 60529. The gasket should be internally embeddded made of polyurethane the box should have glow wire test 960oC in accordance with 60695-2-11 (flame retardant and self-extinguishing. Make-Hensel or equivalent to L&T/Schneider/ABB.

Supply and fixing of loadline vertical TPN DB prewired distribution board double door, 6 way TPN-DPX 12-63, one No MCCB 100 Amps as inconer and four Nos of MCB TPN 40Amps for outgoing , double door type sheet metal enclosure 415V with 63Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable complete all as specified and as directed.

S&F fix sheet metal enclosure MCB SPN distribution board, 12 way, double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush concealed in wall including taking out old DB's and chases wall for fixing DB and making good distributed wall/surfaces to match with existing specification.

All as per item No.62 but MCB DB, 8 way.

All as per item No.62 but MCB DB, 4 way.

All as per item No.62 but MCB DB, 2 way, single door.

S&F of MCCB 100Amps, four pole 415 volts, breaking capacity 25KA, fixed thrmal & magnetic setting with extended terminals connecting lugs complete.

Supply and fix MCB TPN 'B'series, 415 volts, 50Hz, 63Amps suitable for high inrush current loads complete all as directed.

Supply and fix 'B'series MCB SPN 40 Amps,240 volts, 50Hz.

Supply and fix 'B'series MCB SP '6 to 32Amps,240 volts, 50Hz.

Supply and fix 1100 volts grade heavy duty service line cable PVC insulated stranded aluminium conductor, twin core cable,served with inner sheathing of PVC tape and opverall PVC sheathed in service connections two core cable flat or circular of aluminium conductors size 10Sqmm stranded conductor all as directed.

All as per item No.70 but stranded aliminium conductors size 6Sqmm, two core.

Supply and fix of PVC flexible copper conductor cable of size 2.5Sqmm, 3 core as connections to MCB/socket to geysers all as specified.

Supply and fix door bell, Ding Dong AC,230 volts, single pole.

M&L connecting of 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanised steel strip or wire and overall PVC sheathed of size 16Sqmm nominal cross section 2 core laid in tranches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers testing and commissioning complete all as specified including taking out existing unserviceable cable from trenches, floor,ducts, poles or roads complete all as dirrected (Earth work shall be measured and paid separately).

Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable etc and getting out of excavated material complete all as specified and directed.

M&L dry sand cushioning to underground electric cable 8cm below and 15cm above the cable all as specified in clause 19.75 of SSR part-I. Note:-(i) Sand shall be fine sand as specified in clause 14.5 of SSR Part-I (ii) Punned thickness 18cm shall be measured.

M&L bricks laid in trenches flat with width equal to length of bricks for cable protection with well burent sub class B bricks complete all as specified.

Returning, filling in approved excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as directed.

M&L of GI pipe 40mm dia bore light grade with all fittings for cable protection, and fixed complete to wall, panel, pole or laid in trenches and road crossing complete.

Earthing complete with Galvanised Iron earth plate electrode 60x60cmx6mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, PVC pit cover with frame, charcol, salt including provision of earth lead protected by 15mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all as directed. Note :- (i) Item of earthing includes cost of 15mm bore medium grade GI protection pipe and 7.5 mtr long earth lead upto test point. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engineer-In-Charge.

CHOUDHARY ENTERPRISES

M/S SANGA SINGH AND CO

JASSI TRADERS

BEHL AND COMPANY

HARISH BUILDERS

Bidder Name

HARISH BUILDERS