PROVIDING, SUPPLYING, LOWERING & LAYING OF WATER PIPELINE INSTALLATION WORK AT VARIOUS LOCATIONS AT CHHOTAUDEPUR. NAGARPALIKA UNDER: 15TH FINANCE COMMISSION TIED GRANT YEAR: 2024-25

Item No. Description Qty. Unit Amount

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes suitable for potable water with ring fit

joint including cost of rings, as per IS specification no.

4985/ 1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing meterial etc. complete. Note : One

coupler / ring shall be provided with each full length pipe cost of

which is included in rates below. Test Pressure 10.0 Kg/Cm2

Providing and supplying in standard length ISI mark high

density Polyethylene H.D.P.E. Pipes suitable for potable water

as per IS specification no. 4984/1995 including all local and

central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the dept. stores etc.

comp. 10.0 Kg/cm2. 200mm Dia. 1050.00 Rmt. 1267.00

Supply, installation, testing & commissioning of flange ends

Expansion Bellow as per EJMA standards of overall length of

minimum 300 mm, designed for 15 mm axial compression and

5 mm axial extension with tie rods etc. of following MOC &

3 pressure ratings. MOC: Bellows: SA 240 Gr. 304; Internal

Sleeve: SA 240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392 ) & Limit Rods &

Nuts: CS - IS 1367. PN 1.6. Size - NB 100mm & Width 300mm.

3.1 Size - NB 150mm & Width 300mm. 3.00 No. 4896.00

3.2 Size - NB 200mm & Width 300mm. 3.00 No. 6576.00

3.3 Size - NB 250mm & Width 300mm. 3.00 No. 8192.00

3.4 Size - NB 300mm & Width 300mm. 3.00 No. 10800.00

Providing at store or a site of work incl. freight, loading,

4 unloading, stacking insurance, & all taxes etc. complete. PVC

Specials with ISI Mark. 225.00 Kgs. 200.00

Providing at store or a site of work incl. freight, loading,

5 unloading, stacking insurance, & all taxes etc. complete. HDPE

Specials with ISI Mark 500.00 Kgs. 250.00

6 M. S. Specials plain & socket ends 300.00 Kgs. 96.00

SBD SECTION-7 BILL OF QUANTITIES-162

Manufacture, Supply & Delivery of Ductile Iron Flange socket

spigot bends, tees, reducers or any other specials as per BS-

EN-545/1995 Class-A series K12 suitable for use with D.I.

Pipes manufactured as per IS:8329/1994 delivery of specials is

to be made to site of works any where in Gujarat including all

taxes, loading, unloading, carting, stacking, insurance,

inspection charges, octroi etc. complete. With external bitumen

& zinc coating & internal cement mortar lining. Socket & Spigot

type. 80 mm to 300 mm dia.

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

8 conveyance from stores to site of works including cost of

labour, material, cement solvent, giving satisfactory hydraulic

testing as per ISI code. 75mm 756.00 Rmt. 17.25

Lowering, laying and jointing HDPE pipes and specials of

following class and diameter (By butt fusion welding method)

9 including cost of conveyance from stores to site of works at all

level including cost of labour, material, giving satisfactory

hydraulic testing etc. comp. 200mm Dia. 1050.00 Rmt. 131.10

Providing and supplying at store or site of work incl. freight,

loading, unloading, stacking, insaurance & all taxes etc.

complete. P.V.C. Couplers 6 Kg/cm2 (Fabricated) 63mm Dia.

10.1 P. V. C. Couplers 6 Kg/cm 2 (Fabricated) 75mm Dia. 10.00 No. 44.00

10.2 P. V. C. Couplers 6 Kg/cm 2 (Fabricated) 90mm Dia. 10.00 No. 78.00

10.3 P. V. C. Couplers 6 Kg/cm 2 (Fabricated) 110mm Dia. 10.00 No. 133.00

10.4 P. V. C. Couplers 6 Kg/cm 2 (Fabricated) 160mm Dia. 10.00 No. 439.00

PVC Tail Piece with PVC Flange (ISI) Heavy Duty (Moulded)

PVC Tail Piece with PVC Flange (ISI) Heavy Duty (Moulded)

PVC Tail Piece with PVC Flange (ISI) Heavy Duty (Moulded)

PVC Tail Piece with PVC Flange (ISI) Heavy Duty (Moulded)

PVC Tail Piece with PVC Flange (ISI) Heavy Duty (Moulded)

10.10 PVC Tee (Moulded) 63 x 63mm 10.00 No. 125.00

10.11 PVC Tee (Moulded) 75 x 63mm 10.00 No. 177.00

10.12 PVC Tee (Moulded) 75 x 75mm 10.00 No. 199.00

10.13 PVC Tee (Moulded) 90 x 63mm 10.00 No. 251.00

10.14 PVC Tee (Moulded) 90 x 75mm 10.00 No. 297.00

10.15 PVC Tee (Moulded) 90 x 90mm 10.00 No. 324.00

10.16 PVC Tee (Moulded) 110 x 90mm 10.00 No. 470.00

10.17 PVC Tee (Moulded) 110 x 110mm 10.00 No. 407.00

10.18 PVC Tee (Moulded) 160 x 110mm 10.00 No. 857.00

10.19 PVC Elbow (Moulded) 63mm 10.00 No. 77.00

10.20 PVC Elbow (Moulded) 75mm 10.00 No. 129.00

10.21 PVC Elbow (Moulded) 90mm 10.00 No. 216.00

10.22 PVC Elbow (Moulded) 110mm 10.00 No. 358.00

10.23 PVC Reducer (Moulded) 160 x 110mm 10.00 No. 375.00

10.24 PVC Reducer (Moulded) 160 x 90mm 10.00 No. 304.00

SBD SECTION-7 BILL OF QUANTITIES-163

10.25 PVC Reducer (Moulded) 140 x 110mm 10.00 No. 252.00

10.26 PVC Reducer (Moulded) 140 x 90mm 10.00 No. 226.00

10.27 PVC Reducer (Moulded) 110 x 90mm 10.00 No. 188.00

10.28 PVC Bend 90˚ (Fabricated) 6.0 Kg. 63mm 10.00 No. 89.00

10.29 PVC Bend 90˚ (Fabricated) 6.0 Kg. 75mm 10.00 No. 138.00

10.30 PVC Bend 90˚ (Fabricated) 6.0 Kg. 90mm 10.00 No. 236.00

10.31 PVC Bend 90˚ (Fabricated) 6.0 Kg. 110mm 10.00 No. 421.00

10.32 PVC Bend 90˚ (Fabricated) 6.0 Kg. 160mm 10.00 No. 1637.00

PVC R Joint 10.0 Kg (90 mm to 200 mm) As Per Market Rate 10.00 No. 1200.00

Manufacture, supply and delivery of cast iron Detachable joints

(Short & long) complete with joint flanges duly drilled, synthetic

rubber sealing rings manufactured from styrene butadine rubber

(SBR) and other required accessories such as nut, bolts etc.

conforming to IS specification 8794-1988 or its latest revision if

any suitable for use with A.C. Pressure pipes. Delivery of joints

including its accessories including loading, unloading, carting,

stacking, insurance, all taxes, octroi etc. complete. Long Collar

Without ISI Mark (Class 15). For DI Pipe 100mm.

11.1 Long Collar Without ISI Mark For DI Pipe - 250mm 8.00 No. 1254.00

11.2 Long Collar Without ISI Mark For DI Pipe - 300mm 8.00 No. 1632.00

Long Collar over size suitable for PVC/HDPE - 90mm

Long Collar over size suitable for PVC/HDPE - 110mm

Long Collar over size suitable for PVC/HDPE - 160mm

Long Collar over size suitable for PVC/HDPE - 200mm

Long Collar over size suitable for PVC/HDPE - 250mm

Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

12 octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. PN-1.6 With

Hand/Wheel Cap Operates (Alt-1 type long body). 80mm Dia.

Providing and supplying ISI mark CI D/F Reflux Valves as per

IS:5312 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

13 octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. Reflux valves PN

1.6 IS 5312 with ISI mark. 200mm Dia.

SBD SECTION-7 BILL OF QUANTITIES-164

Lowering, laying and jointing in position following C. I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

14 including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete. 80mm

Welding in all positions with required number runs, for M.S.

Pipes internally and/or externally including gauging wherever

necessary, fixing appurtenances and other accessories in

connection with pipe laying work as per specification. As Above

For Butt Joints : Plate Thickness. Welding for Pipe Thickness

4mm to 7mm 40.00 Rmt. 783.15

Gas cutting (Either square cut or V cut) pipes, plates etc.

16 including all costs for the followng thickness. Gas Cutting Above

5 mm up to 10mm. 150.00 Rmt. 64.40

Excavation for pipe line trenches for water supply, sewerage

line, manhole etc. all with shoring and struting if required as per

required gradient and line including safety provisions using site

17 rails and stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and strata as

specified. In all sorts of soil and soft murrum. Upto 1.50 Mtr.

In hard rock and / or in C. C. 1:2:4 or RCC with blasting,

17.1 breaking, chiseling, or by chiseling/ breaking only. Upto

Refilling the pipeline trenches incl. ramming, watering,

18 consolidating desposal of surplus stuff as directed within a

radius of 3 km. 4514.00 Cmt. 25.30

Hydraulic Excavator 1 cum bucket capacity @ 60 cum per hour.

Construction of valves chambers in brick or bela stone

masonry, locally available in C. M. 1:6. Foundation concrete

150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm

thick, inside cement plaster in C. M. 1:3 and cement pointing

outside in C. M. 1:3 and top cover of precast RCC slab 100 mm

thick (with key hole in two parts, each with handles or MS Bar

etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe

invert level incl. complete civil works but excl. cost of excavation

and refilling, with cast in situ RCC slab in one single piece with

fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame

and cover) with 23 mm thick brick masonry wall in C.M. 1:6.

With precast slab in two parts 15mm. Size of 0.90 m x 0.90 m

and 1.0 m deep.

SBD SECTION-7 BILL OF QUANTITIES-165

SBD SECTION-7 BILL OF QUANTITIES-166

C.I. Manhole Frame & Cover. All Type. Having Bearing

Capacity of 50 Ton. 625.00 Kg. 58.00

Add 18% GST Rs,

Add 2% for Contengencis Charges

Add 1% for Quality Control

I / We am/are willing to carry out the work at _____________ % above / below (percent should be written in figure and in

words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

( In words ) ____________________________________________ Percentage above / below the estimated rate.

Estimated Amount put to tender Rs.

Deduct _______ % below Rs. Rs.

Estimated Amount put to tender

Add _______ % above Rs. Rs.

Total Amount Rs.

Total Amount Rs.

*( Please strike out whichever is not applicable)

Note :1 All work shall be carried out as per Public Works Department Hand Book and other specifications of Division or as

Note :2 Rates quoted include clearance of site (prior commencement of work and its close) in all respects and hold good

for work under.

Note :3 I/ We have read the conditions mentioned in this tender and agree to abide by the same.

Signature of Contractor President Chief Officer

ChhotaNagarpalika

Udepur Nagarpalika Chhota

Chhota Udepur Chhota Udepur

SBD SECTION-7 BILL OF QUANTITIES-167