Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 LAccepted-AOC BANIKHET NAVEEN KUMAR BANIKHET CHAMBA HIMACHAL PRADESH 176303 | CHAMBA | HIMACHAL PRADESH | 176303 | ₹1.2 L Quoted ₹2.1 L | 1 | Accepted-AOC Accept |
| 2 | 2₹2.1 L+₹2,105 (1.02%)Rejected-AOC GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | ₹2.1 L+₹2,105 (1.02%) | 2 | Rejected-AOC Reject |
| 3 | 3₹2.1 L+₹4,775 (2.32%)Rejected-AOC | ₹2.1 L+₹4,775 (2.32%) | 3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | UDEY KUMAR L3 | Rakesh Kumar L2 | Naveen Kumar L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches etc. in earth work lift upto a lead of 1.5 metres stacking the excavated soil not more than 3 metres clear from the edge of excavated and then returning the stacked soil when required into plinth sides of foundation in 15 cm layers consolidating each deposited layer by ramming and watering and then depositing of all surplus excavated materials as directed within a lead of 20 metres in all kind of works as per the direction and to the entire satisfaction of Engineer-in-Charge. | 39 | Cum | 590 ₹23,010 | 580 ₹22,620 | 570 ₹22,230 Lowest |
| 2.00Laying, jointing and testing in trenches (to level or grade) G.I. pipe of following dia (H/M Class) conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces (two layers outter side & one inner side) to make the joints leak proof (earth work, providing and welding M.S flanges and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. (Earth work in trench, providing and welding of M.S. Flanges and butt welded joint shall be measured and paid for seperately.) | ||||||
| 2.01 | 150mm dia | 35 | Rmt | 1,675 ₹58,625 | 1,670 ₹58,450 | 1,651 ₹57,785 Lowest |
| 3.00Providing circumferencial Butt welded joints by electrical arc welding to 50 mm dia GI Pipes medium class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 3.01 | 250 mm dia | 20 | Nos. | 1,600 ₹32,000 | 1,595 ₹31,900 | 1,588 ₹31,760 Lowest |
| 3.02 | 200 mm dia | 20 | Nos. | 1,304 ₹26,080 | 1,280 ₹25,600 | 1,274 ₹25,480 Lowest |
| 3.03 | 150 mm dia | 20 | Nos. | 1,000 ₹20,000 | 990 ₹19,800 | 978 ₹19,560 Lowest |
| 3.04 | 80 mm dia | 20 | Nos. | 525 ₹10,500 | 520 ₹10,400 | 517 ₹10,340 Lowest |
| 3.05 | 65 mm dia | 30 | Nos. | 440 ₹13,200 | 430 ₹12,900 | 425 ₹12,750 Lowest |
| 3.06 | 50 mm dia | 35 | Nos. | 360 ₹12,600 | 355 ₹12,425 | 351 ₹12,285 Lowest |
Tender Value
₹2.1 L
EMD Value
₹4,125
Closing Date
2 Sept 2025, 5:00 pmClosed
Executive Engineer
JS Division Dharampur Bharari
Deposit work BSP 2023 1160 various LWSS providing and laying MSERW pipes 350 mm and butt welding to rising main Welding of various dia pipes under JS Section Sidhpur
2025_HPIPH_113169_1
5173-5222 dated 28-08-2025
Open Tender
Civil Works
Item Rate
90 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer
₹4,125
11 May 2026
28 Aug 2025
3 Sept 2025
28 Aug 2025
2 Sept 2025
28 Aug 2025
Amount
Excavation in foundation trenches etc. in earth work lift upto a lead of 1.5 metres stacking the excavated soil not more than 3 metres clear from the edge of excavated and then returning the stacked soil when required into plinth sides of foundation in 15 cm layers consolidating each deposited layer by ramming and watering and then depositing of all surplus excavated materials as directed within a lead of 20 metres in all kind of works as per the direction and to the entire satisfaction of Engineer-in-Charge.
Laying, jointing and testing in trenches (to level or grade) G.I. pipe of following dia (H/M Class) conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces (two layers outter side & one inner side) to make the joints leak proof (earth work, providing and welding M.S flanges and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. (Earth work in trench, providing and welding of M.S. Flanges and butt welded joint shall be measured and paid for seperately.)
150mm dia
Providing circumferencial Butt welded joints by electrical arc welding to 50 mm dia GI Pipes medium class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
250 mm dia
200 mm dia
150 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
Rakesh Kumar (BID ID -550471)
UDEY KUMAR (BID ID -550604)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.62 MB
Form6.pdf
Tender Documents • 0.82 MB
Form8.pdf
Tender Documents • 1.33 MB
TC.pdf
Tender Documents • 0.13 MB
BOQ_165006.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .