Electrification Work for the P2F pilot plant

Amount

Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supply and fixing 20 mm pipe medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply and fixing 25 mm pipe medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 32 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed PVC conduit as required.

Supplying and drawing 3 x 2.5 sq.mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed PVC conduit as required.

Supplying and drawing 6 x 4 sq.mm FRLS PVC insulated copper conductor single core cable (Red, Yellow, Blue, Black & Green) in the existing surface/recessed PVC conduit as required.

Supplying and fixing 3 phase 8 way (8+12), double door, suface/recess mounting, vertical type, 415 V, TPN distribution board with provision for fixing MCCB as incomer and TP MCB as out going, complete with 200 A tinned copper bus bar, common neutral link, earth link, din bar for mounting MCBs, detachable gland plate, interconnections, earthing, phosphatized and powder painted, fixing using bolt and nut / in recess, giving connections etc. as required. (But without MCCB & MCB)

Supplying and fixing 6 to 32 amps rating, 230 Volts, 'C' curve miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connectons, testing and commissioning etc as required.

Supplying and fixing 20 A rating, 415 Volts, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole in the existing MCCB DB complete with connectons, testing and commissioning etc as required.

Supplying and fixing 20 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing Metal Enclosure, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4 pole metal enclosure on surface / recess, complete with earth bar, din bar, detached gland plate, interconnection, phosphetized and powder painted including earthing etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet (3 module) and 15/16 A modular switch, connections etc. as required.

Supplying and fixing of one number 125A, 16 kA, 4 pole (three pole and neutral), 415 V, moulded case circuit breaker (MCCB) with electronic earth leakage module in the existing MCCB DB, complete with connections, testing and commissioning etc. as required.

SITC of a cubical type floor mounting switch board made from 75x40x6 size 'C' channel base frame and 2 mm thick MS sheet, powder coated in suitable colour over a coat of primer, copper bus bars of size 25x5 mm sleeved with heat shrink sleeves, bakelite fuse units with 2 A HRC fuses, coloured phase indication lamps(LED) and switches, separate cable entry/ wire way boxes for the switches with detachable front cover, providing rubber beedings. Earthing all metal parts and switches with 25x3 mm copper strips, giving rigid connections from 400A 4P MCCB to busbar with 25x5 mm tinned copper busbar and busbar to sub switches with 4 SWG tinned copper, sleeved with heat shrink sleeves and marking the identification of switches with white paint fixing danger notice board. Switches & Energy meter :- Incomers :- 400 A 36 KA FP MCCB Outgoing :-400 A 36 kA 4 pole MCCB with varying depth rotary handle - 1 No & 250 A 25 kA 4 pole MCCB with varying depth rotary handle - 2 Nos The unit as a whole should be dust and vermin proof. The minimum clearance from the bottom switch handle to the ground level should be 60 cm.

Supply of 4 feet size box type tube fittings made from CRCA sheet, duly painted with side holders including 18/20 watt x 2 Nos, LED tube light etc, as required.

Installation, testing & commissioning of prewired LED fitting, complete with all accessories , with suitable metal angle clamp on wall, including connection etc, as required.

Supply of box type tube fittings (Batten & T8 LED Tube), complete with side holders and 18/20 watt 4 feet T8 LED tube etc, as required.

Supply of 1200 mm sweep Electric ceiling fan, white colour, capacitor type with double ball bearing, shackles, downrod, canopies, blades, etc, suitable for operation on 240V, 50 Hz, single phase AC supply.

Installation Testing and Commissioning of 1200mm sweep 230V 50Hz ceiling fan with required length, painted down rod (GI) including connections etc. as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe,15mm dia, heavy gauge including giving connection with 0.5 sq.mm 3 core round flexible copper wire and painting the down rod etc. as required. (Note:More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Supply and fixing 380 mm sweep heavy duty exhaust fan with front guard working on 240 Volts AC supply, making suitable size frame with 4 sets of SS nuts & bolts , making good the damages, giving connections using 0.5 sq.mm 3 core round flexible copper wire, etc as required.

Supply of 1.1 kV grade 3.5 C x 70 sq.mm, Aluminium conductor XLPE insulated PVC sheathed armoured power cable as required.

Supply of 1.1 kV grade 3.5 C x 300 sq.mm, Aluminium conductor XLPE insulated PVC sheathed armoured power cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 C x 70 sq.mm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 C x 300 sq.mm size, in the existing masonry open duct as required.

Supply and making end termination with brass compression gland and aluminium lugs for 3.5 x 70 sq mm (38 mm) size of PVC sheathed / XLPE aluminium conductor of 1.1KV grades as required.

Supply and making end termination with brass compression gland and aluminium lugs for 3.5 x 300 sq mm (70 mm)size of PVC sheathed / XLPE aluminium conductor of 1.1KV grades as required.

Supply and providing DCP type fire extinguisher (5kg) with BC powder and CO2 cartridge and hose, clamps etc.with ISI mark.

Supply and providing one number of 2m x 1m 12mm size, electrically graded, rubber mat (IS:5424 / 1969)in front of the main switch board.

Supply and providing ISI plate earthing as per IS 3043, with G.I earth plate 600 mm x 600 mm x 6 mm thick including all accessories, providing masonry enclosure with CI cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/coke and salt) as required.

Supply and laying of one number 8 SWG good quality bare copper conductor for loop earthing along with existing XLPE insulated PVC sheathed armoured power cable as required.

Supplying and laying 25 mm x 5 mm GI strip, from the bottom of the earth plate to the test joint, including connection / terminating with nut, bolt, spring washer etc, as required.(Jointing shall be done with 3 sets of GI nut, bolt & spring washer)

Supplying and providing " Excel " Earthing compoung including mixing with excavated fine soil and water to make it as slurry and filling around the earth plate etc. as required.

Charges for disconnecting the existing 1.1 KV XPLE Al cable from the 400A MCCB without any damage etc, as required.

Supply and providing Heat shrinkable cable jointing kit for 3.5 C x 300 sq.mm size XLPE insulated PVC sheathed armoured power cable as required.

DIAMOND ENGINEERING WORKS

URALUNGAL LABOUR CONTARCT COOPERATIVE SOCIETY LTD