Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-AOC | ₹42.6 L Quoted ₹36.1 L | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical Technical L3 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technical L4 |
| 4 | Rejected-Technical KOONAMPALAYIL THULAPPALLI PO PATHANAMTHITTA 686510 | PATHANAMTHITTA | PATHANAMTHITTA | KERALA | 686510 | - | - | Rejected-Technical Technical L5 |
| 5 | Rejected-Technical | - | - | Rejected-Technical Technical L2 |
| Sl No | Description | Qty | Unit | G S Engineering Works L3 | jibin joseph L5 | H ANZAR L1 | MD SHAVEZ L2 | HARI SHANKAR L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Phase II Balance work- Sheet roofing for 4 flats | ||||||||
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 9 | cum | 8,300 ₹74,700 | 7,500 ₹67,500 Lowest | 7,722.19 ₹69,499.71 | 8,000 ₹72,000 | 8,072.23 ₹72,650.07 |
| 1.00 | 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | 90 | sqm | 755 ₹67,950 | 350 ₹31,500 Lowest | 701.98 ₹63,178.2 | 600 ₹54,000 | 733.81 ₹66,042.9 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 9,200 | kg | 190 ₹17,48,000 | 200 ₹18,40,000 | 193.08 ₹17,76,336 | 180 ₹16,56,000 Lowest | 201.83 ₹18,56,836 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 688 | kilogram | 106 ₹72,928 | 130 ₹89,440 | 97.56 ₹67,121.28 Lowest | 150 ₹1,03,200 | 101.98 ₹70,162.24 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 3,900 | kg | 160 ₹6,24,000 | 200 ₹7,80,000 | 156.39 ₹6,09,921 Lowest | 180 ₹7,02,000 | 163.48 ₹6,37,572 |
| 1.01 | OD132234/2025-2026:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including preparation of surface, etc. complete On steel work. | 829.92 | sqm | 160 ₹1,32,787.68 | 150 ₹1,24,488.45 | 145.48 ₹1,20,737.2 Lowest | 150 ₹1,24,488.45 | 173.87 ₹1,44,298.71 |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1,150 | sqm | 750 ₹8,62,500 | 850 ₹9,77,500 | 704.11 ₹8,09,729.95 Lowest | 760 ₹8,74,000 | 720.3 ₹8,28,345 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 190 | metre | 500 ₹95,000 | 500 ₹95,000 | 472.43 ₹89,761.7 | 400 ₹76,000 Lowest | 499.85 ₹94,971.5 |
Tender Value
₹43.1 L
EMD Value
₹50,000
Closing Date
7 Mar 2026, 5:00 pmClosed
CHIEF ENGINEER, KSCADC
KSCADC Building, Kamalewsaram , Manacaud P.O. Thiruvananthapuram Pin-695009
Renovation of Pookkulam Tsunami housing complex phase 2 Balance Work-Sheet roofing of 4 Housing complex(32 dwelling units)-General Civil Work
2026_SCADC_841934_1
ET-107/2025-26
Open Tender
Civil Works - Buildings
Item Rate
150 days
Pookkulam in Kollam District
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,950
₹50,000
16 Jul 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
7 Mar 2026
28 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Phase II Balance work- Sheet roofing for 4 flats | |||||
| 1.001 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.002 | 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | - | sqm | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.004 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kilogram | - | - |
| 1.005 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.006 | OD132234/2025-2026:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including preparation of surface, etc. complete On steel work. | 0.2 | sqm | - | - |
| 1.007 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.008 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1420126.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
TD1070226.pdf
Tender Documents • 3.59 MB
BOQ_1420126.xls
BOQ • 0.31 MB
Drawing.pdf
Other Document • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .