REPAIR/REPLACEMENT OF JOINERY INCL REPAIR TO BUILD IN CUPBOARD, ROOF SHEET, FALSE CEILING AND ALLIED WORKS UNDER AGE B/R-I AT GE CLEMENT TOWN, DEHRADUN

Amount

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame)complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down shutter of any description area not exc.1 sqm each and removing to or from store complete all as specified and directed.

Taking down shutter of any description area exc. 1 sqm but n exc 2 sqm each and removing to or from store complete all as specified and directed.

Taking down and Refixing of shutter of any description not exc 1 sqm each leaf in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down and Refixing of shutter of any description exc. 1 sqm but not exc 2 Sqm each leaf in same opening after easing and adjusting building hard ware etc complete all as specified and directed

M&L for MS Framed work of Fe 410 W (Gde-E-250) Quality A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass,gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) & (b) complete all as specified and directed.

S & F 35 mm thick second class hard wood rail and style plain, framed, factory made panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stiles are as per IS – 1003 (Part – I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F Pre painted Three shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Three Tracks size of 107 mm x 44 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with three integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminum 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window system at site using anchor fasteners, inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished items as specified and directed. .

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

Dismantling Boarding any description fixed in any position with nails complete all as specified and directed.

S&F for 18 mm thick , prelaminated medium density fibre (MDF) , interior grade, prelaminated one side with decorative choice lamination and other side balancing white with lamination fixed with screw to timber/ steel frame work as in CB shutter, shelves etc including with PVC liping on all exposed edges on same texture and shade. Stainless steel cleat of suitable size will be use to fix the shelves of CB and cabinets.

S & F 18 mm thick with min density 600 Kg / Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S & F 18 mm thick with min density 600 Kg / cum LEAD FREE PVC Celuka ply of single side rigid prelaminated of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.

Taking down aluminium door and windows/ventilator of any size and of any description built in wall and making good at disturbed surface with cement mortar 1:4 and applying two coats of plastic emulsion paint as per existing treatment complete all as specified & directed.

S&F Powder coated Aluminium anodised glazed side hung door shutters with anodised aluminium frame of section of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5 mm thick tinted/plain sheet glass ordinary quality with all necessary suitable push & pull plate/handle , screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No Aluminium butt hinges 100 mm size B-21 Type and one No mortice brass lock 100 size 4 leaver (Vertical Type) , for each shutters complete all as specified; and ;directed

S&F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick including 5 mm thick tinted/plain glass, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, aluminium snap beading & necessary rubber packing, locking, roller & opening arrangement, incl Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, all fitting and fixtures complete all as specified and directed by Engr-In-Charge

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted/ plain or frosted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

S&F 7 mm thick aluminium grills of god quality surrounded by aluminium 'C' channel with mesh size 75 X 75mm incl taking down old grills of any type complete all as specified and directed.

S&F in repair Powder coated Aluminium anodised Partition fixed/sliding type with frames of size -side , top rail and intermidiate sections size 85x44.45x1.5 mm , incl. screwing of frame glass necessary joints cleats, glazing clips rubber packing, snap beading, fixed to wall with necessary screws and plug complete all as specified & directed. (Note-rates for 4.80 mm thick tinted glass / 4mm thick coloured aluminium composite panels reqd to be fitted in shutters are included in the item )

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

M&L Mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or steel,Alu, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight not more than 60 Kg of aluminium (extruded section body) complete all as specified and directed.

S & F in repairs for hasp and staples, size 150 mm, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed

S & F Auto closing hinges 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified and directed.

S & F Ball bearing runners 400 mm Telescopic (KA 5632) full extension load capacity 45 kgs complete all as specified and directed.

S & F D-type cabinet handles premium quality, stainless steel 304 / gloss chrome / SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed.

S & F magnet catcher suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S & F Stainless Steel 304 grade wire Basket of pull out type like lain / cup & saucer / bottle / multi purpose / 2-3 shelf baskets etc for kitchens of required sIze complete fixed in position all as specified and directed.

S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 300 mm long Stainless Steel sliding door bolt bright finish of heavy quality with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F in repair for 25mm dia Stainless Steel Curtain Rod with SS brackets and decorative type SS knobs on both ends incl T/D of any type old curtain rods and making good disturbed surfaces with cement mortar or putty complete all as specified and directed

S&F in repair 100 mm long Stainless Steel butt hinges medium weight complete all as specified and directed.

S&F 100 mm long Stainless Steel butt hinges medium weight complete all as specified and directed.

S&F in repair 75 mm long Stainless Steel butt hinges medium weight complete all as specified and directed.

S&F 75 mm long Stainless Steel butt hinges medium weight complete all as specified and directed.

S&F in repair 150 mm size Stainless steel handles heavy weight of good quality complete all as specified and directed.

S&F 150 mm size Stainless steel handles heavy weight of good quality complete all as specified and directed.

S&F in repair 200 mm long Stainless steel barrel tower bolts heavy weight of good quality complete all as specified and directed.

S&F 200 mm long Stainless steel barrel tower bolts heavy weight of good quality complete all as specified and directed.

Dismantling of AC/GI plain/Corrugated / semi corrugated roof sheets any type and any size complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling framed timber work as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-Charge.

S & F steel Fe-410-W (Gde 250 Quality-A) work in tubular stanchion/post including special shaped washer etc. complete using one of more tubes or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair MS pipe 50 to 125 mm dia as shaft and MS flats for rings to make rolling assembly including two coats of synthetic enamel paint paint over a coat of red oxide primer complete all as specifed & directed.

S&F in repair part of steel rolling shutters MS gear box set general complete incl handle and anchoring rod as of approved quality all as specified and directed.

S&F in repair Ball bearing suitable for rolling shutter complete all as specified and directed.

S&F in repair Guide channel 3" (3.50 mm thick) mild steel deep channel section etc.complete all as specified and directed.

S&F in repair Hood Cover made of 1 mm thick GI Sheet pattern

S&F in repair Bottom plate 5" (2.25mm) complete all as specified and directed.

S&F in repair Anchoring rod of 25 mm dia of MS pipe complete all as specified and directed.

S&F in repair Safety lever locks MS with 4 levers complete all as specified and directed.

S & F in repair 1.00 mm thick mild steel rolling shutter strips duly pressed on both ends of vertical sides for interlocking locks for the required length of existing shutter as directed by Engg-in-Charge

Taking down and refixing in the same opening steel rolling shutter including oiling and greasing to required necessary fitting to functional shutters as required bush, spring, MS pipe, rod lock ball bearing, top cover, anchoring rd, hasp and staple and push pull or gear operating system, bevel gear box and crank handle etc complete all as specified and directed. (Note:- Necessary contituent items required during repair of rolling shutter shall be paid and seperately as given above)

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc all as specified and directed

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

M&L old size Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on other than fair face of brick works in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp,insulation,etc)or insulation boards/slabs/blankets,any thickness,including cover fillets. complete alll as specified and directed

Providing & fixing false ceiling at all heights with Semi perforated 12 mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 1200 x 600 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter?locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main?T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L?shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in?Charge.

M&L for applying 2 mm thick wall care Putty in two layers on ceiling surfaces absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper including and applying two coats of Oil bound distemper on ceiling complete complete all as specified and directed.

M&L 4 mm thick non asbestos fibre cement building boards of size 600 x 600 mm fixed or laid to GI / Aluminium framework fixed in ceilings flat or sloping including anodised aluminium snap grid framework complete with all channel, flanges, hangers & sections as required for fixing false ceiling complete all as specified and directed by Engineer-in-charge.

S&F in repair decorative type of any colour PVC hollow section heavy grade designer wall panelling 5 mm thick as approved by engr-in-charge fixed in position including all matching beading, angle for jambs, cills etc incl Taking down wall panelling and similar workc omplete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M/L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/light colour shade polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick on vertical surface of wall of size not exceeding 0.36 sqm,as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 450 x 7-8 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

M&L for 20 mm thick granite (of any type & colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms/shelves incl screed bed 15 mm th. in CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings incl all brass reducers,unions,Tee fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

S&F CPVC Brass elbow 20mm bore dia complete all as specified and directed

S&F CPVC Brass Tee 20mm bore dia complete all as specified and directed.

S&F CPVC Brass Union 20mm outer dia complete all as specified and directed.

S&F CPVC Brass Elbow (20/15) 20 mm bore dia complete all as specified and directed.

S&F CPVC Brass Male Brass Threaded Adaptor (MTA/ MBTA) 20 mm bore dia complete all as specified and directed.

S&F CPVC Brass Female Brass Threaded Adaptor (FTA/ FBTA) 20 mm bore dia complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

Taking down bib tap/wash basin pillar tap/ stop cock/mixture tap and refixing the same after repair/replacement of spindles of any type (half turn type or quarter turn type etc.) for 15 mm bore size complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifeid

S&F in repair 32mm dia bore Waste coupling, brass, chromium plated for sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs

S&F 32 mm dai Low density polyethylene (LDPE) pipes, waste pipe for urinal,WHB etc. of pressure rating 6 kgf/sq. cm complete all as specified

S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

Supply & fix in repair wall mixer chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes complete all as specified and directed .

S & F in repair 15mm dia brass CP sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed .

S & F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe completed all as specified and directed .

S & F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

M&L for applying 2 mm thick wall care Putty on walls or ceilings and making good minor cracks, filling of holes etc. and making surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for preparation and applying two coats of oil bound distemper on wall or ceiling over a coat of primer on prepared new/old surfaces complete all as specified and directed.

M&L for Preparation of old surfaces of Wall and applying one coat of Cement Base Paint on walls all as specified and directed by Engineer-in-Charge.

M&L for preparing old plastered surfaces of walls, Facias, cornices etc and apply one coat of weather proof exterior emultion (Make as approved by GE) Complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

ABHINAV KUMAR (BID ID -3508765)

sweety pest control (BID ID -3517614)

M/s RK ENTERPRISES (BID ID -3517594)