SUPPLY, AND INSTALLATION OF HYDRAULIC AND PNEUMATIC TRAINER KIT

Amount

SUPPLY, AND INSTALLATION OF HYDRAULIC & PNEUMATIC TRAINER KIT FOR THE UPGRADATION OF PRIORITY GITIS ACROSS UTTARAKHAND

Compressor unit

Pneumatic Trainer Kit, each consisting ofthe following matching components and accessories: (i) Single acting cylinder - 1 No (ii) Double acting cylinder - 1 No (iii) 3/2-way valve - 2 Nos. (iv) 3/2-way valve - 1 No (v) One-way flow control valve - 2 Nos. (vi) 5/2-way valve - 1 No (vii) 5/2-way valve - 1 No (viii) 5/2-way pneumatic actuated - 1 No (ix) 3/2-way roller lever valve - 2 Nos. (x) Shuttle valve (OR) - 1 No (xi) Two-pressure valve (AND) - 1 No (xii) Pressure gauge - 1 Nos. (xiii) Manifold with self-closing - 1 No (xiv) Push button station for electrical signal input - 1 No (xv) Relay station - 1 No (xvi) 3/2-way single solenoid valve - 1 No (xvii) 5/2-way single solenoid valve - 1 No (xviii) 5/2-way double solenoid valve - 1 No (xix) Power supply unit, - 1 No (xx) Profile plate, Anodised Aluminium - 1 set

Pneumatic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:

Carrier for mounting components, such as PB & relay boxes

Cut section model for pneumaticcomponents

Hydraulic Trainer Kit, each consisting of the following matching components and accessories: (i) Hydraulic Power pack - 1 No. (ii) Pressure relief valve - 1 No (iii) Drip tray, steel - 1 No. (iv) Pressure Gauge - 1 No. (v) Four-Way distributor - 1 No. (vi) Double acting hydraulic cylinder - 1 No. (vii) Suitable Weight - 1 No. (viii) Mounting kit for weight - 1 No. (ix) 3/2-way directional control valve - 1 No. (x) 4/2-way directional control valve - 1 No. (xi) 4/3-way directional control valve - 1 No. (xii) Non-return valve - 1 No. (xiii) Pilot-operated check valve - 1 No. (xiv) One-way flow control valve - 1 No. (xv) T-Connector with self-sealing coupling nipples (2 Nos ) and quick coupling socket (1 No) - 2 Nos. (xvi) Profile plate, - 1 set

Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:

Cut-section models for hydraulic components

Cut section model of Pneumatic vales

Hydraulic trainer with necessary elements for different machine circuit with all types of transparent valves and pressure gauge, reservoir etc.

Pneumatic trainer with necessary elements for demonstration different machine circuit with all types of valves, pressure gauge and compressor etc.

Hydraulic trainer kit Hydraulic Trainer with (i) Equipment trays - 2nos., (ii) Pressure gauge – 2 nos., (iii) Hydraulic Motor -1 no., (iv) 4/2- way hand lever valve - 3no.s, (v) 4/3-way hand lever valve with relieving mid-position - 3nos., (vi) 4/3-way hand lever valve with closed mid-position - 3nos., (vii) 4/3-way hand lever valve with recirculating mid-position - 3 nos., (viii) Pressure sequence valve, pressure relief valve – 3 nos., (ix) 3-way pressure reducing valve – 2 nos., (x) 2-way flow control valve – 2 nos., (xi) One- way flow control valve - 4nos., (xii) Non-return valves – 4 nos., (xiii) Shut-off valve- 4 nos., (xiv) Diaphragm accumulator with shut-off block – 1 no., (xv) Weight up to 10 kg- 1 no., (xvi) 2/2 way plunger / stem actuated – 2 nos., (xvii) Standard hoses with quick connectors, (xviii) Flow dividing valve – 1 no., (xix) 5-way distributor with pressure gauge - 1no.s, All these accessories are mounted on M.S. fabricated frame.

Pneumatic trainer kit Pneumatic trainer consists with (i) Pressure Gauge, (ii) Pneumatic Motor, (iii) Single Acting Cylinder, (iv) Double Acting Cylinder, (v) Air Filter Regulator Lubricator with Pressure Gauge (vi) Hand Lever Operated Valves : 2 Nos, (vii) 5/2 way &3/2-way, Solenoid Valve: 2 Nos, (viii) 5/2 way & 3/2 way, Pilot Operated Valve: (ix) 5/3 Spring Centered, (x) 5/2 Spring Returned, (xi) 3/2 Pilot Operated. Palm Operated Valve: (xii) 3/2- way Valve, Roller Lever Valve : (xiii) 5/2 way, 3/2-way Valve, (xiv) Shuttle Valve: (xv) OR Valve, (xvi) AND Valve: (xvii) Dual Pressure Valve, (xviii) Flow Control Valve, (xix) Non-Return Valve, (xx) Block Manifold: 6 ways, (xxi) Plastic Tubing as per require, (xxii) Quick Push-Pull connectors, (xxiii) Air Compressor, all these are pneumatic components are mounting on a aluminum profile plate

Anshuman Tech Pvt Ltd