Renovation of laboratories and various offices etc.

Amount

Wall Paneling:- Providing and fixing, in position concealed G.I. section for wall paneling over column/wall along with layer of upto 12 mm thick comm. Ply fixed on the 'w' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C wtih fully threaded self -tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C, all complete as per the drawing & directions of Engineer - in - charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. Necessary wooden members at specified heights to suport glass/softboards, whiteboard, indoor unit of split AC etc. must be provided. Cost inculdes making cutouts for ac duct/ grills/ switch boards/ sockets etc.

Providing and fixing in position Storage of any height, 19mm thick. commercial board duly laminated (1mm premium category) on all external surfaces, rear of the shutter. Front shutter made out of 19mm thick commercial board. All other surfaces incl. shelves, drawers etc to be finished with 0.8mm thick laminate as/approved. Rear to be made of 8 mm thick commercial ply. All outer exposed area shall be finished with approved 1mm thick premium laminate/matching paint finish. Anti termite oil to be put on the raw surface before applying/ finishing with laminate. All complete including making set (s) for mock-up sample for approval, modifying, etc including necessary hardware such as heavy duty s.s.hinges/piano hinge, locks, magnetic catchers etc. Base price of commercial board being Rs 80/Sft. (Customised Furniture). upto 450mm deep board complete as per drawing and design approved by the Engineer in Charge. Make:- Duro, Green, Century

Providing and fixing in desired position OVERHEAD STORAGE 350-450mm deep. The front shutter, side of cupboard top & bottom shall be made of 19mm thick commercial board. The front shutter and all other exposed surface of board shall be cladded with 1mm thick laminate of required shade and texture and all internal surfaces shall be finished with flat paint as/specified. The item shall include P/F all fittings/s.s.hardware like handles/ knobs tower bolts, ball magnetic catchers etc. including making of trough /pelmet for lighting. The rear side of the cupboard to be treated with the anti-termite oil as approved by the EIC/PM. Complete as/drawings . (Customised Furniture). complete as per drawing and design approved by the Engineer in Charge. Make:- Duro, Green, Century

Providing and fixing soft pin board comprising of 12 mm thick soft pin board (salotex board), polythene sheet of 500 micron on back side, matty fabric cloth of approved color, 1 ¼”x 1” hard wood moulding duly lacker polished, SR-999 make adhesive for stretching cloth, nails screws, gitties, fevicol, painting etc. complete in all respect.

Providing and fixing of whtie board size-2400 mm (L) x 1800 mm (H) comes with a smooth and durable resin coated steel magnetic writing surface, anti-scratch resistance, easy dry wipe and compatible with all dry-erase makers and is surrounded by a highly robust and durable aluminium frame and covered with four PP/ABS plastic corners, all complete as per dirction and instruction of the EIC. Make:- Laxmi Writing Board, Eduvision Display Systems, Obasix

Dismantelling, breaking & Disposing of existing Vinyl flooring in lab, corridor etc. or as required at other places as per directions of Engineer-in-charge.

Removing Exisiting Aluminium partition, door and repair, finished with powder coating etc then refixing of repaired Partition/Door, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Supplying and fixing 32 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply, testing and commissioning of 36W LED recessed grid-ceiling luminaire, suitable for 600x600 module with White Powder Coated and enclosed with high efficient UV resistance flat low glare diffuser assembled with low trim metal frame. Constant Current Driver with THD ≤ 10% Power Factor above 0.9 avilable in 4000K to 6500K with CRI above 80, Compliance with LM 80 Standards with L70-50,000 burning hours Life, Efficacy -≥100 lm/W, IP PROTECTION -IP 20. Make: Legero (Modena LER 2636) or simillar to Phillips (Full glow,RC380B LED 36S-6500 G4 L60 W60 PSU OD) & Wipro( Immaculate LED Platinum, LM25-361-XXX-65-G1).

Supply, testing and commissioning of 12w LED surface mounted round panel downlight with die cast aluminium body and metal cover. Constant Current integral Driver with THD ≤ 12% Power Factor above 0.9 avilable in 4000K to 6500K with CRI above 80,Compliance with LM 80 Standards with L70-50,000 burning hours Life, Efficacy -≥80 lm/W, IP PROTECTION -IP 20. Make: Legero (Coral Surface, LRS 3112), Phillips(sleek surface downlight, SM250C LED12 S-6500 PSU WH) & Wipro (IrisLED Slim RO SM, LD80-101-XXX-60-SM).

Supply, testing and commissioning of Elegant white color, 5 star rating, size- 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, complete with all accessories. Make Havells Efficiencia Neo (BLDC 26 W) ,or equivalent in Crompton, Orient.

Supply, testing and commissioning of exhaust fan 900 r/min (rpm), Size- 450mm in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Make: Havells (Turbo Force SP) or equivalent in Crompton, Orient.

Supply of the following 1100 volts grade, Aluminium/Copper conductor, XLPE insulated, PVC sheathed, steel armoured/Unarmoured cables as per IS 7098 Part-1 and as per technical specifications of this tender and directions of Engineer-in-Charge. AL. CONDUCTOR i. 3.5cx300 sq.mm. Al Ar. XLPE cable

ii. 3.5cx50 sq.mm. Al Ar. XLPE cable

CU. CONDUCTOR i. 1cx50 sq.mm. Cu un Ar. XLPE cable

ii. 4 X 16 sq. mm

RACEWAY AND JUNCTION BOX Supply & Fixing of factory fabricated pre-galvanized G.I. sheet steel raceway in 2mm thickness for bottom & sides and 2/3mm thick top Cover as called for including necessary civil work such as chase cutting in screed, fixing/ jamming the raceway, aligning & levelling and finishing with sand cement plaster along with PCC base : i. 65mm x 40mm (2mm top Cover)

ii. 100mm x 40mm (2mm top Cover)

iii. 150mm x 40mm (2mm top Cover)

iv. 200mm x 40mm (2mm top Cover)

v. 250mm x 40mm (3mm top Cover)

vi. 300mm x 40mm (3mm top Cover)

Floor Junction Boxes Supply & Fixing of openable top Cover floor Junction Boxes made from 2mm thick pre-galvanised GI sheets for bottom & sides & 3mm thick GI top Cover complete with rubber gasketing beneath the top Cover. The Junction Boxes shall be suitable to accommodate GI floor raceways as specified above, necessary civil work as described in earlier item to be included here too. i. 100 x 100 x 50

iii. 200 x 200 x 50

All the rates quoted by the contractor shall be complete finished work including cost of all labour, material, scaffolding, finishing as required with tools, plants, lead, lift, taxes, tollage, octroi, royalties etc. except those specially excluded in the description of the individual items. All works shall be executed as per drawings, specification and instructions of Project Manager and shall include the supply and installation at site of all the equipment, ancillary materials as specified and all such items what-so-ever which may be required to fulfill the intent and purpose as laid down in the specification and/or the drawings. All materials shall be as per ISI specification and with IS certification marked wherever applicable. The material shall be duly approved by Engineer Incharge before incorporation in the actual work. Supply of online load sharing 60 KVA UPS system of following ratings with computer communication possibilities consisting of standard software .... (complete as per DNIT) Providing & Fixing of VRLA Battery Banks and BCB consisting of 12V,Cells SMF Type suitable for UPS System for minimum 30 mins backup for individual UPS. Note:- Please also attach battery back up calculation alongwith quotation. Make: Delta:Ultron HPH Series 60kW ,Riello Power:MST 60, Schneider electric: E3MUPS60KHS Note :- There shall be 2Nos 60 KVA UPS which will work in Parallel Hot Redundant Mode)

Installation, Testing and Commissioning of online load sharing 60 KVA UPS system as above

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel ........... (complete as per DNIT) 1 No. Incomer 250Amps 4P MCCB with thermal magnatic releases for O/C, S/C, E/F. Including with extended rotary handle and Phase separators both sides. 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's. Bus Bar One set of TPN, AL. bus bar rated 300Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases. The outgoing feeders are as follows : 1No. 160 Amps 4P feeders each having one number 160 Amps 4P MCCB. 2Nos. 100 Amps 4P feeders each having one number 100 Amps 4P MCCB. 4Nos. 40/63Amps 4P feeders each having one number 40/64 Amps 4P MCB. 2 Nos. 40/63 Amps DP feeders each having one number 40/63 Amps DP MCB. 1 set of complete wiring MAIN ELECTRICAL DISTRIBUTION BOARD as describe above and shown in SLD.

UPS INPUT PANEL Ics = 35KA Incomer 1 No. Incomer 100Amps 4P MCCB with thermal magnatic releases for O/C, S/C, E/F. Including with extended rotary handle and Phase separators both sides. 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's. Bus Bar One set of 4P, AL. bus bar rated 200Amps (after considering necessary deratings of 80%) for phases and neutral. The outgoing feeders are as follows : 2Nos. 100 Amps 4P feeders each having one number 100 Amps 4P MCCB. 1 set of complete wiring UPS INPUT PANEL as describe above and shown in SLD.

Incomer 2 No. Incomer 100Amps 4P MCCB with thermal magnatic releases for O/C, S/C, E/F. Including with extended rotary handle and Phase separators both sides. 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's. Bus Bar One set of 4P, Al. bus bar rated 200Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases. The outgoing feeders are as follows : 8Nos. 40/63 Amps 4P feeders each having one number 40/63 Amps 4P MCB. 2Nos. 40/63 Amps DP feeders each having one number 40/63 Amps DP MCB. 1 set of complete wiring

Bidder Name

Amount

Mahesh Kumar(GSTN-06AIAPK0201H1Z3)

M/s KHATANA GROUP OF CONSTRUCTIONS(GSTN-NA)

Mahesh Kumar

Mahesh Kumar