INT FURNSHING REPAIR MAINT CIVIL WORK AGALI

Amount

INTERIOR WORK

Gypsum False Ceiling: Providing and fixing gypsum suspended ceiling, which includes Gyproc surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to wall/partition with the help of nylon sleeves and screws, at 610mm centers. The suspending G.I intermediate channels of size 45mm, 0.9mm thick with two flanges of 15mm each from the soffit at 1220mm centers with ceiling angle of width 25mm x 10mm x 0.55 thick fixed to soffit with G.I. cleat and steel expansion fastners at every 610mm c/c. Ceiling sections of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 610mm centres. 12mm mm tapered edge Gypsum is then screw fixed to ceiling section with 25mm drywall screws driver or drilling machine with suitable attachment (All G.I channels are Saint-Gobain Gyproc). The 12mm thick saint gobain boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape. Rate shall be inclusive of Cut outs for A/c machines, spot lights, light fixtures, A/C. Grills, fire and security systems cut outs, All Sections should adhere to the manufacturers guidelines. Including cost and conveyance of all materials labour charges etc. complete as per drawing.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Clerical Counter for Bank Area : Providing & placing Workstation Table (75 cm wide, 75 cm high) as per architect approved drawing. Frame Work to be finished with 19 mm thick Plywood ( IS 710 Grade, BWP ,Greenply Optima).All outer portion of the table to be finished with 1 mm laminate Sheet (Greenlam HSC) as per drawing. Inner portion of the table to be finished with 0.7 mm laminate Sheet(Greenlam/Equivalent) as shown in the drawing. Finish the table with Keyboard Tray, CPU provision , 2 shelf, 2 drawer, and Footrest. Hardware & Fittings : Hettich/Ebco/Equivalent. Finish as per drawing with necessary grooves, projections & electrical openings if any. Including cost and conveyance of all materials labour charges etc. Size 160x75x75 cm

Cash Counter Table with Customer Platform : Providing & fixing cash counter Table as per design intent. Frame Work to be finished with 19 mm thick Plywood ( IS 710 Grade, BWP ,Greenply Optima). All outer portion of the table to be finished with 1 mm laminate Sheet(Greenlam HSC) as per drawing. Inner portion of the table to be finished with 0.7 mm laminate (Greenlam /Equivalent) . Finish the main table with Foot rest(Hard wood) ,CPU Provision ,key board tray, 4 drawers and shelf. Additional elevated table top provision to be provided separately for customer transaction area as well as staff area. Use necessary SS hinges , locks, Telescopic sliders, SS handles etc (Make: Hettich\Ebco\equivalent). Finish as per drawing with necessary grooves, projections & electrical openings if any. Including cost and conveyance of all materials labour charges etc. Size 160x75x120 cm

Manager Table with Side Table: Providing & placing Manager table with side table as per architect approved drawing. Frame Work to be finished with 19 mm thick Plywood ( IS 710 Grade, BWP ,Greenply Optima).All outer portion of the table to be finished 1 mm laminate Sheet as per drawing. Inner portion of the storage to be finished with 0.7 mm laminate Sheet (Greenlam /Equivalent) as shown in the drawing. Finish the main table with Keyboard Tray, CPU provision and Footrest(hardwood)and side table with 3 shelf and 3 drawer. Hardware & Fittings : Hettich/Ebco/Equivalent. Finish as per drawing with necessary grooves, projections & electrical openings if any. Including cost and conveyance of all materials, labour charges etc. Size: Main Table(180x75x75 cm)with side unit (Size : 90x45x75 cm)

Auditor Table: Providing & placing Auditor table as per architect approved drawing. Frame Work to be finished with 19 mm thick Plywood ( IS 710 Grade, BWP ,Greenply Optima).All outer portion of the table to be finished with 1 mm laminate Sheet as per drawing. Inner portion of the storage to be finished with 0.7 mm laminate Sheet (Greenlam /Equivalent) as shown in the drawing. Finish the main table with Keyboard Tray, CPU provision and Footrest(hardwood) and shelf and 2 drawers .Hardware & Fittings : Hettich/Ebco/Equivalent. Finish as per drawing with necessary grooves, projections & electrical openings if any. Including cost and conveyance of all materials labour charges etc. Size: Main Table(160x75x75 cm)

Double Skin Solid Plywood Partitions: Providing & fixing plywood Partition system(80mm) for bank area as per architect approved drawing. Partition to be fixed for a height of 270 cm. Frame work to be finished with 19mm thick plywood( IS 710 Grade, BWP ,Greenply Optima) fixed to floor, walls and ceiling at a spacing of 40cm centre to centre horizontally and vertically, using metal/wooden support dash fastner,anchor fasteners or metal screws with nylon plugs , studs etc. Both sides of the frame to be fixed with 9 mm thick ply( IS 710 Grade, BWP ,Greenply Optima ).Finish both side of the partition with 1mm thick laminate sheet (Greenlam HSC).Finish the partition with necessary grooves, electrical/Window openings if any. Including cost and conveyance of all materials labour charges etc. complete as per drawing.Only visible areas will be measured.red

10MM THICK TOUGHENED GLASS FOR COUNTER TABLES: Supplying and fixing of 10 mm thick toughened glass top on top of tables. There should not be joints on individual table tops. All the edges have to be neatly moulded as per the the length of the table. Edges to be moulded tidily as per architects satisfaction. Only visible area to be measured. Rate to be inclusive of cutting charges, molding charges, tapering charges, wastage, transportation, labour etc.Only visible area to be measured

Providing single shutter partially glazed/opaque flush door as per design of size 90 cm wide and 210 cm height/as per drawing. Thickness 30 mm. Frame work to be finished with 19mm thick plywood( IS 710 Grade, BWP ,Greenply Optima) at a spacing of 40cm centre to centre horizontally and vertically. Both sides of the frame to be fixed with 9 mm thick ply( IS 710 Grade, BWP ,Greenply Optima ). Exposed Surface to be finished with 1 mm thick decorative laminate of approved make and colour. Hinges, latches, mortice lock, auto closer to be provided as per design and size and direction of engineer in-charge. NC putty to be neatly applied on exposed surfaces. Hardwares: Ebco, Godrej, Hettich

Plastic Emulsion Paint Application Applying two or more coats of plastic emulsion paint of approved make over a coat of primer on walls and ceiling. The work includes sand papering, applying of 2 coats of wall putty of Birla make/equivalent to give even and smooth finish as per directions of the bank.Rate includes cost and conveyance of all materials, labour etc.

Providing and fixing wall paneling in any design upto ceiling height consisting of 19mm thick marine grade IS 710 BWP plywood framework sections, fixed to floor, walls and ceiling at the spacing of 40cm centre to centre horizontally and vertically using necessary wooden/metal support, dash fastener, anchor fastener or metal screws with nylon plugs and studs. 9mm thick marine grade IS 710 BWP plywood to be fixed on exposed surface. Surface to be finished with 1 mm thick decorative laminate of approved make and colour. Including providing openings for glass, window, doors, designs, groves etc. complete as per design. Including all cost to finish work at site.

Providing and fixing storage unit/file rack of 40 cm depth, at 60 cm height and 60cm width, using 19mm thick marine grade IS 710 BWP plywood frames and racks. Inside area to have 0.7mm thick white/off white laminate. Back side to have 6 mm thick multiwood. Doors to be made of 19mm thick marine plywood/ block board at height 210/240 cm. All exposed portion to be finished with 1 mm thick decorative laminate of approved make and colour. Multilocks, auto hinges to be fixed. etc as per design and size and direction of engineer in charge. NC putty to be applied neatly on all exposed edges, if any. Including all cost to finish work at site. Surface area to be measured.

Providing and fixing wall paneling with natural decowood veneer in any design upto ceiling height consisting of 19mm thick marine grade IS 710 BWP plywood framework sections, fixed to walls at the spacing of 40cm centre to centre horizontally and vertically using necessary wooden/metal support, dash fastener, anchor fastener or metal screws with nylon plugs and studs. 9mm thick marine grade IS 710 BWP plywood to be fixed on exposed surface. Surface to be finished with 4 mm thick natural veneer with melamine polish of approved make and colour. Including providing openings for glass, window, doors, designs, groves etc. complete as per design. Including all cost to finish work at site. Base price of natural decowood veneer 150/- per sqft

CIVIL WORK

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

12 mm cement plaster of mix: 1:6 (1 cement : 6 fine sand).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

ROOFING WITH TRAFFORD SHEET Supplying and fixing color coated GI trafford sheet roofing of 0.35 mm thick (JSW) or nearest size available in market with necessary screws and washers over GP square tubes of 1.5”x1.5”, 1.5”x5”, .75”x1.5”, etc and 16 guage (Apollo), applying one coat of red oxide primer paint for all steel members of approved quality including drilling holes for purlins & rafters with necessary bolts & nuts etc., at connecting and lapping at sides and end of sheets to suit purlins / truss spacing as per relevant specifications, and as directed at site of work including all labor, tools, materials, equipments, scaffolding etc., complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and supplying plumbing work for bathroom and wash basin area. Pipe work for water inlet and waste disposal, all charges including materials labour and all other charges

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

CHAIR SUPPLY

Providing and supplying Executive chair for Manager (SL-Y-101 Executive chair ) Headrest individual non adjustable PP frame with cushioned imported foam mesh. Backrest, PP with fiber- outer shell and square mesh. Armrest Fixed- PP with fiber. Seat upholstered with imported fabric. Simple single lock mechanism. Powder coated TUV-CLASS 4 Gas spring 120mm, Certified with BOSQ logo engraved to ensure best inclass quality. Nylon Base with PU castors: 330mm. Tested as per BIFMA X5.1 standards etc. Including all charges loading, unloading, transportation...etc. Branded Bosq

Providing and supplying workers chair (AY-T-201 Performance or Work chair) Backrest, PP with fiber. Armrestsfixed- PP with fiber. Seat upholstered with imported fabric. Simple single lock mechanism. Powder coated TUV-CLASS 4 Gas spring 120mm, Certified with BOSQ logo engraved to ensure best inclass quality. Nylon Base with PU castors: 330mm. Tested as per BIFMA X5.1 standards. Including all charges loading, unloading, transportation...etc. Branded Bosq

Providing and supplying Visitors chair for counter with arms ( AB-400 Guest or Multi-use chair )Backrest, PP with fiber. Seat upholstered with imported fabric. 2.1mm thick, fixed round tube Powder coated/electro plated chrome mild steel 4 leg base. Seat upholstered with soft foam & back with fibre. Tested as per BIFMA X5.1 standards Including all charges loading unloading transportation ..etc Branded Bosq

Providing and supplying visitors chair for cabins (AY-T-301 Guest or Multi-use chair) Backrest, PP with fiber. Armrests fixed- PP with fiber. Seat upholstered with imported fabric 22.1mm thick, fixed round tube Powder coated/electro plated chrome mild steel cantilever base. Tested as per BIFMA X5.1 standards. Including all charges loading, unloading, transportation...etc. Branded Bosq

DESIGNER SOFA FOR CUSTOMER LOUNGE Providing & fixing 3 seater double layered cushioned seating as per architect approved drawing & design. Frame work to be finished using 19 mm thick ply. Outer Portion of the seating to be finished using as per design. Finish the sofa with PU filled with foam of sufficient density as shown in the drawing. Sofa to be finished with leather finished rexine (Halol or jute) of approved quality. Stitching and other works to be completed as per architect satisfaction. Including cost and conveyance of all materials labour charges etc.

AIR CONDITIONING WORK

1 TON SPLIT AC Providing and supplying BRANDED VOLTAS/BLUESTAR/CARRIER 1 TON inverter tytpe split AC at the site. Rate, transportation charge, loading charge all inclusive

2 TON SPLIT AC Providing and supplying BRANDED VOLTAS/BLUESTAR/CARRIER 2 TON inverter type split AC at the site. Rate, transportation charge, loading charge all inclusive

STABILISER FOR AIR CONDITIONERS Providing and fiing 2KVA V guard make stabiliser for air conditioners. Transportation, fixing charges all inclusive.

ADDITIONAL DRAINAGE PIPING FOR AIR CONDITIONERS Supplying and fixing additional drainage piping for both split and cassette AC as per the site conditions

ADDITIONAL COPPER PIPING FOR AIR CONDITIONERS Supplying and fixing additional copper piping for both split and cassette AC as per the site conditions

Air conditioner stand Providing and fixing wall mounted steel stand for ODU unit. transportation, fixing charge all inclusive.

AIR CONDITIONING INSTALLATION WORK Providing Air conditioning installation work. Transportation, fixing charges all inclusive.

ELECTRIFICATION WORK

Supply, design and locating of 18mm/20mm/25mm junction boxes ISI slandered (precession ) 1/2/3/4 ways normal/deep size as to give ceiling connections and drawing circuits through 20 mm size of pvc pipe – ISI standard ( GEO.,PRESESSION,CONSEAL) andinter connecting the JB`s circuit separately and for ceiling terminations. Including cost and conveyance of all materials labour charges etc .complete.

Supply and fixing light/fan points on ceiling and walls or where ever designed by electrical engineers with ( ISI std ) feruled as per standard and with specific amperage modular switch control. including cost and conveyance of all materials labour etc complete. One light point controlled with one switch

Supply and fixing light/fan points on ceiling and walls or where ever designed by electrical engineers with ( ISI std ) feruled as per standard and with specific amperage modular switch control. including cost and conveyance of all materials labour etc complete. Two light point controlled with one switch

Supply and fixing light/fan points on ceiling and walls or where ever designed by electrical engineers with ( ISI std ) feruled as per standard and with specific amperage modular switch control. including cost and conveyance of all materials labour etc complete. Three light point controlled with one switch

Supply and fixing of SQUARE/ROUND -15 W LED lights on celling where ever designed by electrical engineers with copper coloured wire with green earth wire so as to share the connected load and equal distribution of lights bands for standard candle power and keeping distance. including cost and conveyance of all materials labour charge etc . complete

Supply and fixing of fancy LED strips under ceiling down designs including suitable adapter(10 Amp) for every 5 mtrs and other fittings. Including cost and conveyance of all materials labour charge etc. complete

Locating and installing additional points from the voltage stabilizer generator set and inverter as per the design and connected load sharing as possible with its change over switch .including cost and conveyance of all materials labour charge etc. complete

Locating and fixing ceiling/ wall fan points with colour wire earth continuity nearby the existing fan clamps on ceiling or wall fan location where ever needed with stepped regulator for system for speed control excluding installation of fans with one way switch including cost and conveyance of all materials labour charge etc . complete

Supply and installing of wall fan (Crompton 400mm sweep wall mount fan) neatly and safely or fixing with anchor fastener and making good the all after fitting etc complete. including cost and conveyance of all materials labour charges etc. complete

Drawing special lines for telephone point up to 5 pair where ever designed by the Electrical Engineer and Installing the independent specific sockets (jack) .Including cost and conveyance of all materials labour charges etc. complete

Drawing special Line for Ian cabling point up to 5 pair where ever designed by the Electrical Engineer and Installing the Cat-6 keystone D-link, Faceplate single D-Link, surface mount box, RJ 45 connector with boot D-Link etc. Including cost of materials and labour charges. Etc complete

Supply and Installing 3 pin 6A plug point with 14 swg bare copper or wtth 1.5 mm green wire earthing combined with the existing switch board and with a separate switch control etc. complete each nos. Including cost and conveyance of all materials labour charges etc. complete

locating and installing of 16 A-3 pin power plug with indepented SB (3 x 2.S mm/4mmf6 mm wire) green wire for earthing up to 5 mtr distance from the control panel / DB including cost of all materials labour charges etc. complete

locating and installing of 32 A-3 pin power plug with DP switch for AC points including cost of all materials labour charges etc. complete

locating and installing of switch boards with base plate, cover etc of approved make including cost of all materials labour charges etc. complete 8 md

locating and installing of switch boards with base plate, cover etc of approved make including cost of all materials labour charges etc. complete 12 md

locating and installing of switch boards with base plate, cover etc of approved make including cost of all materials labour charges etc. complete 16 md

Design and drawing circuit colour code wire 1 mm 650v grade with independent MCB control crimpling feruling etc If necessary as per the Electrical Design up to a distance 10 m from DB/control panel .including cost and conveyance of all materials labour charges etc .complete

Design and drawing circuit colour code wire 1.5 mm 650v grade with independent MCB control crimpling feruling etc If necessary as per the Electrical Design up to a distance 10 m from DB/control panel .including cost and conveyance of all materials labour charges etc .complete

Design and drawing circuit colour code wire 2.5 mm 650v grade with independent MCB control crimpling feruling etc If necessary as per the Electrical Design up to a distance 10 m from DB/control panel .including cost and conveyance of all materials labour charges etc .complete

Design and drawing circuit colour code wire 4 mm 650v grade with independent MCB control crimpling feruling etc If necessary as per the Electrical Design up to a distance 10 m from DB/control panel .including cost and conveyance of all materials labour charges etc .complete

Design and drawing circuit colour code wire 6 mm 650v grade with independent MCB control crimpling feruling etc If necessary as per the Electrical Design up to a distance 10 m from DB/control panel .including cost and conveyance of all materials labour charges etc .complete

Pipe earthing :-Supplying and providing of Pipe earthing using 40mm GI pipe at l500mm to 2l00mm dept after digging the standard pits and refill with earthing compounding or salt, charcoal, sand in alternate layer and top brick masonry and metal opening type cast Iron covering etc complete with earth work .including cost and conveyance of alI materials labour charges etc complete.

Supply, providing efficient PLATE EARTHING using 2’x2’ copper plate,2.5 m long copper rod with necessary earth pit pipe connection including earth excavation to dig up the pit as per drawing, filling the pit with the earthing element of specified make, salt etc. Cement concrete or equivalent construction, including civil work and Cu strip connection at the top etc. Complete as required.

Drawing of bare copper line clamping of swg crimpling etc per meters .Including cost and conveyance of ail materials labour charges etc. complete. Swg 10

Installing ELCB of breaking capacity 4P 30mA and current rating @ 400c: 16 100A and giving connection termination in color code of specific wire and earthing the same with testing and commissioning etc. including cost and conveyance of all material, labour etc

INSTALLING ISLOATORS of breaking capacity 16/32 A and giving connections/ termination in colour code of specific wire and earthing then same with testing and commissioning etc including cost conveyance of all materials labour charge etc complete 16A 2P

INSTALLING ISLOATORS of breaking capacity 16/32 A and giving connections/ termination in colour code of specific wire and earthing then same with testing and commissioning etc including cost conveyance of all materials labour charge etc complete 32A 4P

INSTALLING ISLOATORS of breaking capacity 16/32 A and giving connections/ termination in colour code of specific wire and earthing then same with testing and commissioning etc including cost conveyance of all materials labour charge etc complete MCB 6-32A

Design locating and installing of specific amperage double door distribution boxes with MCB and other all necessary fittings dressing the wires /cables neatly as per colour code and giving connection to the insulators ELCB/MCB/neutral linking/earth link/pilot lamps/including cost and conveyance materials labour charge etc complete. 3P 16way VDB

Design locating and installing of specific amperage double door distribution boxes with MCB and other all necessary fittings dressing the wires /cables neatly as per colour code and giving connection to the insulators ELCB/MCB/neutral linking/earth link/pilot lamps/including cost and conveyance materials labour charge etc complete. 3P 12 way DB

Design locating and installing of specific amperage double door distribution boxes with MCB and other all necessary fittings dressing the wires /cables neatly as per colour code and giving connection to the insulators ELCB/MCB/neutral linking/earth link/pilot lamps/including cost and conveyance materials labour charge etc complete. 1P 8 way DB

Supplying and lying of fuble cable CAT 6 using Rj45 for linking all computers/CCTV and IT equipments with internet connections etc complete as interior design including cost conveyance of all materials labour charge etc complete

Supplying and laying telephone cabling using 2 pair fusible cable for linking all tables as per interior design design including cost conveyance of all materials labour charge etc complete

Laying UG cable armourd aluminium/copper of size designed by the electrical consultant neatly tyeing/clamping at the cable tray/under ground with/with out sleeve as per the direction of electrical supervisor at site etc complete with termination of cable 4C x 10sqmm

Supply and fixing amplifier of Ahuja make with provision for AUX, USB etc. model DPA 370 with all wiring, fittings etc. rate to be inclusive of all labour, conveyance etc.

Supply and fixing 4W ceiling mounted speakers (Ahuja 451T) with all wiring, fittings etc. rate to be inclusive of all labour, conveyance etc. Gypsum ceiling to be cut neatly for the speakers as per architect satisfaction

Liasoning charges for the approval of KSEB/Inspectorate including the submission of required drawings, for obtaining necessary approvals including incidental and handling charges. Statutory fees to be paid by the bank, if any

SHREE DESIGNERS (BID ID -2209661)

GLOBAL INTRIOR WORKS AND TRADERS (BID ID -2210048)

GOLDEN GLOBE INDUSTRIES (BID ID -2201631)

Ashly Furnishing Co Pvt Ltd (BID ID -2210053)