| 1 | SITC of 160 KVA Online UPS | Supply, Installation, Testing and Commissioning (SITC) of 160KVA online UPS, 3 Phase input, 3 Phase output, PWM IGBT based online double conversion type with inbuilt isolation transformer suitable to drive constant current regulators (CCR) with 100 percent unbalanced load at output at full load condition with standard features like 100 percent rated static bypass, maintenance bypass facilities active input power factor correction, phase sequence corrector, pure sine wave output, compatibility of generator supply, user friendly LCD display and having provision of upgrading UPS to run in load sharing mode in future, battery management features integrated with main UPS controller, operating condition 415 (plus minus) 10 percent, 3 phase 50 Hz AC supply, IP 20 capable of running at 100 percent load delivering 2 phase/single phase load with 3 phase of output and as per the enclosed technical specifications along with the following complete as required. | 2 | Nos | [email protected] | 120 |
| 2 | SITC of Battery Bank for 160KVA UPS for 30 min backup | (a) Supply, Installation, Testing & Commissioning (SITC) of individual battery bank Set for each 160KVA UPS, 12 Volt and sufficient VAH (as per approved design / calculation) rating for minimum 30 minute backup from each UPS i/c suitable rating battery circuit breakers, interconnection between the batteries cabling by copper conductor between battery bank and UPS, glanding & termination along with battery rack. | 2 | Set | [email protected] | 120 |
| 3 | | Supply, installation, testing & commissioning of 2 KVA ON Line UPS single phase incoming & single phase outgoing having IGBT rectifier & inverter, harmonics less than 5 percent, as per the enclosed technical specifications complete as required. | 1 | Nos | [email protected] | 120 |
| 4 | SITC of Batteries for 2 KVA UPS | (a) SITC of batteries for 2 KVA UPS of 15 minutes of back up time including maintenance free batteries, interconnecting cables, battery stand etc complete as required as per technical specification. | 1 | Set | [email protected] | 120 |
| 5 | SITC of LT Panel for UPS Incomer | Design, fabricate, supply, installation, testing and commissioning of indoor compartmentalized type Panel for UPS (UPS Input Panel), having panel of suilabre size, bus bars with SMC/DMC supports, made of 14 swc CRCA sheet steel, totally enclosed, lP-42, free standing, floor / wall mounting, powder coated painting, suitable to the existing space, operation on 3 phase and neutral, 415V, 50 Hz AC system with bus bars, G.I flat Earth strip on both side, Removable gland plates at bottom and top with suitable size of predrilled holes for cables, cable interconnections, wiring, earthing, rotary handles & spreader links to all MCCBS, powder coated painting etc. with following items and installation on suitable channels /elevated concrete foundation as per site requirement/ directions of E-l-C.
INCOMER
MCCB of 400 Amps, 35/36 kA, 4 pole, microprocessor based release with Rotary operating mechanism, shunt trip, auxiliary contact etc. - 01 No.
96 Sqmm Digital Multifunction Meter with RS4B5 port along with MCBs & CTs of suitable ratings - 01 Set.
ON/OFF lndication Lamps, (LED type for R, Y & B) for each outgoing along with MCBs - 01 Sets
BUSBAR
One set of 400 Amp. TPN aluminium bus bars of suitable rupturing capacity.
OUTGOING
MCCB of 400 Amps, 35/36 kA, 4 pole, microprocessor based release with Rotary operating mechanism, shunt trip, auxiliary contact letc. -02Nos.
ON/OFF lndication Lamps, (LED type for R, Y & B) for each outgoing along with MCBs - 02 Sets | 1 | Each | [email protected] | 120 |
| 6 | SITC of LT Panel for UPS Outgoing | Design, fabricate, supply, installation, testing and commissioning of indoor compartmentalized type Panel for UPS (UPS output Panel), having panel of suilabre size, bus bars with SMC/DMC supports, made of 14 swc CRCA sheet steel, totally enclosed, lP-42, free standing, floor / wall mounting, powder coated painting, suitable to the existing space, operation on 3 phase and neutral, 415V, 50 Hz AC system with bus bars, G.I flat Earth strip on both side, Removable gland plates at bottom and top with suitable size of predrilled holes for cables, cable interconnections, wiring, earthing, rotary handles & spreader links to all MCCBS, powder coated painting etc. with following items and installation on suitable channels /elevated concrete foundation as per site requirement/ directions of E-l-C.
INCOMER
MCCB of 400 Amps, 35/36 kA, 4 pole, microprocessor based release with Rotary operating mechanism, shunt trip, auxiliary contact etc. - 02 No.
96 Sqmm Digital Multifunction Meter with RS4B5 port along with MCB & CTs of suitable ratings - 02 Set.
ON/OFF lndication Lamps, (LED type for R, Y & B) for each outgoing along with MCBs - 02 Sets
BUSBAR
One set of 400 Amp. TPN aluminium bus bars of suitable rupturing capacity.
OUTGOING
MCCB of 400 Amps, 35/36 kA, 4 pole, microprocessor based release with Rotary operating mechanism, shunt trip, auxiliary contact etc. -02Nos.
ON/OFF lndication Lamps, (LED type for R, Y & B) for each outgoing along with MCBs - 02 Sets | 1 | Each | [email protected] | 120 |
| 7 | Retro Fitting of 400 Amp MCCB in place of existing MCCB. | Retro fitting of following MCCB in place of existing MCCB in Panel i/c Spreader Terminals, adjustment of bus bar etc. as required.
A) MCCB of 400 Amps, 35/36 kA, 4 pole, microprocessor based release with Rotary operating mechanism, shunt trip, auxiliary contact etc. | 5 | Job | [email protected] | 120 |
| 8 | Earthing with copper earth plate | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (with charcoal/ coke and salt ) as required. | 2 | Job | [email protected] | 120 |
| 9 | P and F of 25 mm x 5 mm copper strip | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia medium class G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. | 20 | Meter | [email protected] | 120 |
| 10 | P and F of 25x 5 mm Cu strip on surface | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess and connections etc. as required | 20 | Meter | [email protected] | 120 |
