DFSITC of 35 Nos. 30M high Hot Dip Galvanized High Mast type Tower with LED Luminaries and replacement of HPSV by LED Luminaires on existing 50 Nos. 30M HM and 15 Nos. 27.5 Mtrs. Lattice type lighting towers with CMC for 5 years including 2 years DLP

Amount

High Mast: Design, Supply, Installation, Testing and Commissioning of 30 Mtrs. high Hot dip galvanised High mast type lighting tower complete with all relevant accessories as per Technical Specification.

Supply

Installation, Testing and Commissioning

Load Point Panel:: Supply, Installation, Testing and Commissioning of Outdoor type Load Point Panel, IP55 Enclosure, fabricated from SS316 grade sheet of 2mm thick, suitable GI C type channel [ISMC] and flat etc. and as per Technical Specification.

Supply

Installation, Testing and Commissioning

Relocation, Installation, Testing and Commissioning of existing load point panel/FPB including replacement of 400A SDFU-2Nos.,Time switches, ML 8/10 power contactors etc.

Feedar Pillar with Intelligent smart lighting control system: Design,Supply, Installation, Testing and Commissioning of Feeder Pillar with Intelligent smart lighting control system for 30 Mtr. High Masts and Lattice type lighting tower . Feeder Pillar shall be Outdoor type, dust, vermin weather proof , IP55 enclosure fabricated from SS316 grade sheet of 2mm thick, suitable angled and flat, mounted on GI C type channel[ISMC] as per Technical Specification.

Supply

Installation, Testing, and Commissioning

Luminaries & Lamps: Design, Supply, Installation, testing and commissioning of LED luminaries with complete accessories as per Technical Specification.

Supply of 500 W(min.) LED Luminaire [as per design]. [1 set means:-Total Qty. of luminaire for 85Nos., 30Mtrs. High Mast and 15Nos., 27.5Mtrs. Lattice towers as per design by luminaire manufacturer submitted by bidder during bidding]

Installation, Testing and Commissioning 500 W(min.) LED Luminaire on newly supplied 35Nos. high mast [as per design.].

Installation, Testing and Commissioning 500 W (min.) LED Luminaire on existing 50Nos., 30M high mast Towers [as per design.].

Installation, Testing and Commissioning 500 W(min.) LED Luminaire on existing 15Nos., 27.50M high Lattice Towers [as per design.].

LT Cable: Supply of LT Cable, 1.1KV grade, XLPE U.G. Alu. Cable as per Technical Specification.

Supply of 3.5 C X 150 Sq.mm.

Supply of 3.5 C X 240 Sq.mm.

Supply of 3.5 C X 400 Sq.mm.

Supply of 3.5 C X 25 Sq.mm.

Laying, testing and commissioning of LT Cables: Laying, testing and commissioning of LT Cables including end termination of cable at Outdoor feeder pillar,load point panel,Junction box and Sub-station. Job includes supply and installation of HDPE pipe, GI pipe, Al. saddles & end termination materials.

By existing RCC trench/Hume pipe/GI Pipe/GI structure/HDPE pipe.

By excavating trench.

By removal of paver blocks, excavating trench and laying cable.Job includes restoring/re-fixing paver blocks as directed by Engineer.

By 160mm dia. HDPE pipe (PN6) through earth excavation.

By 160mm dia HDPE Pipe (PN6) through HDD boring method

By 150NB Heavy duty GI Pipe through Boring

By 150NB Heavy duty GI Pipe through earth excavation

LT Cable Jointing : Supply & Installation of LT 1.1 kV Heat shrinkable type Straight through jointing kits for XLPE, Aluminum armoured UG cable as per Technical specification.

3.5C x 400 sq.mm

3.5C x 240/185 sq.mm

3.5C x 150/120 sq.mm

3.5C x 35/25 sq.mm

Aviation Light: Supply, Installation, Testing and Commissioning of Twin Dome LED type Aviation Obstruction Luminary.

Supply

Installation, Testing and Commissioning

Earthing System: Supply, Installation, testing and commissioning of GI Plate earth station as per Technical Specification.

GI strip laying: Supply, laying and termination of size of 50 X 6 MM GI strip as per Technical Specification.

Supply

Laying, termination, commissioning and interconnection between earthing station.

Protection Guard: Design, supply, Fabrication and erection of protection guard from used rail having the height of 1.5 Mtr. above the Ground Level. 11/12/13Mtrs.used rail would have to collected from HDC's store /Yard.Job includes transportation, cutting, erection including necessary foundation work as per Technical Specification.Rail would be provided by HDC on free of cost basis.

Existing High Mast Tower & Lattice Tower : Dismantling, Handling & Transportation of erected 30Mtrs. High Mast Towers and re-erecting old and used 30Mtrs. HM towers on existing foundation/ newly constructed foundation. Job includes replacement of wire rope, MCB, Trailing cable, JB's, Luminaire, aviation fittings, and winch assembly in existing HM Towers.

Dismantling of 1x400Watt HPSV Luminaire with CG Boxes, 2x400Watt HPSV Luminaire,aviation luminaire, existing wiring, existing Winch assembly, exisitng trailing cable, existing wire ropes, MCB's from 50Nos. existing 30M high mast Towers and dismantling HPSV Luminaire with CG Boxes & aviation luminaire from 10Nos. existing Lattice type lighting towers. The job includes transporting of all dismantled materials from HM Towers / lattice towers from site to HDC store as directed by Engineer. (Apporx.1100Luminaire, 800CG Boxes & 60 set of aviation luminaire)

Supply and installation of Double gear, Double drum, Double pinion winch assembly on 30M existing high mast.

Supply and installation of 2Nos. wire ropes on existing 30M high mast each (62Mtrs. each).

Supply and installation of Hot dip GI sheet doors on existing 30M high mast towers.

Supply & Installation of 40A/63A TPN Class-C MCB at High Mast / existing FPB and interconnection work with 10 Sqmm flexible copper wire.

Supply and installation of 2x5Cx4sqmm. EPR insulated copper trailing cable for high mast raising arrangement (62Mtrs. each) with Weather proof industrial sockets. (2Nos. each high mast).

Supply & Installation of GI Weather proof IP66 JB's on the top of lattice towers. (2Nos. each Lattice tower).

Supply & Installation of GI Weather proof IP66 JB's on the top of existing High Mast tower. (2Nos. each HM tower).

Supply and installation of Hot dip galvanised lantern carriage on existing HM towers

Repairing of climbing monkey ladder and top platform of existing lattice tower with GI angle, GI channel, GI flats and GI plates. Job includes supply and installation of suitable size GI angles, GI channels,GI flats and GI plates as per available structural drgs. of HDC.

Transportation of existing 30Mtrs. HM from existing location to new location as directed by Engineer

Erection, Testing and commissioning of 50Nos. existing 30Mtrs. HM Towers.

500kVA, Outdoor Package sub-station:- Design, Supply, Installation, testing and commissioning of Package Outdoor Sub-Station as per Technical Specification.

Supply

Installation, testing and commissioning

11kV HT VCB Panel:-:- Design, Supply, Installation, testing and commissioning of HT VCB Panel, 11kV, 630A, 21kA for 3Sec. Copper bus bar HT Panel as per Technical Specification. [VCB Panels- 1No.-I/C & 3Nos. Out goings]

Supply

RCC foundation, Installation, testing and commissioning

HT Cable: - Supply of H.T. cable as per Technical Specification.

Supply of 11kV(E), 3 C X185 Sq.mm. XLPE insulated Alu.conductor armoured U.G.cable

HT Cable Laying: - Laying, testing,commissioning & termination of HT Cables at Sub-station of HDC. Job includes supply and installation of Hume and GI pipe.

By existing RCC trench/Hume pipe/GI Pipe/GI structure.

By excavating trench.

By removal of paver blocks, excavating trench and laying cable.Job includes restoring/refixing paver blocks as directed by Engineer.

By 160mm dia. HDPE pipe (PN6) through earth excavation.

By 160mm dia HDPE Pipe (PN6) through HDD boring method

By 150NB Heavy duty GI Pipe through Boring

By 150NB Heavy duty GI Pipe through earth excavation

Earthing System: Earthing system: Supply, Installation, termination, interconnection between earthing station for Outdoor Package sub-station & VCB Panel.

11KV End termination and st. through Kit: - Supply and installation of indoor type heat shrinkable end termination kit and st. through kit for HT,11KV 3C X 185Sqmm XLPE UG Aluminium Cables.

Supply of end termination kit

Supply of st. through kit

Installation, Testing & commissioning

GI strip laying: Supply, laying and termination of size of 50 X 6 mm GI strip as per Technical Specification.

Supply

Laying, termination, commissioning and interconnection between earthing station.

30 Mtr. High Mast: Design and construction of RCC Foundation for 30Mtrs. High Mast , including excavation of earth(after strengthening of soil condition by removing slushy materials and replacing by silver sand and compacting thereafter to make the base suitable for High Mast foundation), Double Layer brick soiling, PCC, Supply of foundation accessories consisting of required numbers of foundation bolts ,Nuts, Washers, Anchor Plates, Template etc. in complete and HDPE/PVC pipe of suitable size for cable entry; supply of foundation accessories like cement, reinforcement steel bars, bricks, sand, stone chips, shuttering materials labour required for RCC foundation, refilling of earth/zone-3 sand up to the existing ground level after curing. The design foundation of High Mast shall be based on IS:875 &IS:456.

30 Mtr. High New High Mast Towers. (As per Drg.)

30 Mtr. High New High Mast Towers (By Pile foundation).

30 Mtr. High for existing High Mast Towers (As per Drg.)

Load Point Panel: Construction of RCC foundation of Load point Panel including earth excavation, supply of foundation accessories like cement, reinforcement steel bars, bricks, sand, stone chips, shuttering materials labour required for RCC foundation, refilling of earth up to the existing ground level after curing.

Feedar Pillar with Intelligent smart lighting control system: Construction of RCC foundation of Load point Panel including earth excavation, supply of foundation accessories like cement, reinforcement steel bars, bricks, sand, stone chips, shuttering materials labour required for RCC foundation, refilling of earth up to the existing ground level after curing.

Outdoor Package Sub-station: Construction of RCC foundation of Outdoor Package sub-station including earth excavation, supply of foundation accessories like cement, reinforcement steel bars, bricks, sand, stone chips, shuttering materials labour required for RCC foundation, refilling of earth up to the existing ground level after curing.

Non-Comprehensive /Comprehensive Maintenance Contract with full responsibility of carrying out repair and supply of required original spare parts to keep the system fully operational condition for a period of 5 years, after handing over/taken over of the system.

Non-Comprehensive maintenance during Guarantee period of 1st year & 2nd year). [Quantity:1 LS]

Comprehensive maintenance with spares (except luminaire) during 3rd year.

Comprehensive maintenance with spares (except luminaire) during 4th year.

Comprehensive maintenance with spares (except luminaire) during 5th year.

RAJDEEP ELECTRICALS PVT. LIMITED (BID ID -3124759)