SR to Building Works

Name of Work :: SR to Court campus at Kapadvanj (Pro. Building Parking Shade, underground tank, water proofing

bore/sump,compound wall, fencing , block painting , storm water line , mosquito net, partition , drainage, toilet block chamber and

Bill of Quantities (BOQ)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[1] Dismentaling tiled of stone floors laid in mortar including stacking 42.00 Sqm 46.77

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

[2] Carry out Acrylic polymer modified elastomeric water-proofing 92.00 Sqm 904.41

membrane coating treatment for under ground tank as per

following : Cleaning of concrete surface / plaster surface with

grinder, blower, chisel etc. and make it free from dust, dirt, frost

etc. Make an Angel Fillet at joint of floor and Periphery wall with

mixing ratio of 1 part Cement and 3 part Sand admixed with 5 Ltr.

Latex based Mortar and screed modifier & bonding agent of best

quality manufacrurer per Cement bag. Apply Acrylic polymer

modified elastomeric waterproofing membrane coating on shaft

wall as well as bottom of best quality manufacrurer on pre wet

concrete surface as per manufacturer standard

specification.Second coating shall be applied after 24 hour of first

coating. Treated surfaces must be kept moist for a minimum of

hours using continuous water spray & Waterponding for slab shall

be executed . After doing all above treatment, make 12 to 15 mm

plaster on all periphery wall upto 0.6 m depth and avg. 50 mm

thick screed on floor. For plaster mixing ratio will be 1 part

cement: 2 part sand: 125 ml Integral waterproofing liquid

admixture of best quality manufacrurer per cement bag and

required water, For making screed mixing ratio will be 1 part

Cement: 2 Part Sand: 4 Part 10 mm down course aggregates:

ml Integral waterproofing liquid admixture of best quality

manufacrurer per bag of cement and required water etc.

complete as per instruction of Engineer In Charge.

[3] Brick work using common burnt clay building bricks having 16.00 Cum 4289.32

crushing strength not less than 35 kg./Sq.Cm. in Super Structure

superstructure above plinth level in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) (B) Conventional upto all floor level

[4] Providing and fixing M.S. grills of required pattern to wooden / 100.00 Kg 107.36

stone frames of windows etc. with M.S. 16MM DIA. POLISHED

HORIZONTAL BARS at required spacings and frame alround, square

or round bars with round headed bolts and nuts or by screws

including one coat of primer and two coats of matt finished oil

painting etc complete.

[5] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 11.00 Sqm 1248.74

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

[6] Providing & Laying 300 x 300 mm x Avg. 8-10 mm thick matt finish 23.00 Sqm 949.68

glazed tiles flooring in treads of steps and landings laid on a bed of

12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) Colour,

shade and Pattern approved by engineer in charge.

[7] Providing and laying coloured glazed tiles of the size 300 mm x 300 69.00 Sqm 1417.36

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[8] Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 46.00 Sqm 686.90

concrete Concrete Paver block ( Sample to be approved by

architect ) 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

[9] Providing and fixing pre-cast concrete kerb stone of gray cement 50.00 Rmt 384.96

based concrete block 30cm length,30cm height and 15cm thick of

M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

[10] Providing 15 MM THICK SMOOTH CEMENT PLASTER IN SINGLE 36.00 Sqm 194.07

COAT WITH 1 x 1 CM GROOVES AT JUNCTION OF STRUCTURAL

MEMBERS on Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-sand) upto all Floor

[11] 20mm thick sand faced cement plaster on walls upto height 10 120.00 Sqm 335.65

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

[12] Finishing wall with TWO COATS OF 100% WEATHER PROOF 5053.00 Sqm 114.53

ACRYLIC EMULSION PAINT OF APPROVED SHADE AND BRAND LIKE

APEX on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

[13] Providing laying and jointing in true line and level 15mm dia. 20.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[14] Providing laying and jointing in true line and level 25mm dia. 30.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[15] Providing laying and jointing in true line and level 50mm dia. 30.00 Rmt 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[16] Providing and fixing screw down bib taps of following size.(B) Brass 20.00 No 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

[17] Providing and Fixing C.P. Pillar cock 15 mm Ø Heavy duty swan 10.00 Each 799.45

neck including fixing with CP brass nipple including all labour &

material etc. complete as per instruction of Engineer In Charge.

[18] Providing and Fixing C.P. Angle stop cock 15 mm Heavy duty with 10.00 Each 558.92

cap including all labour & material etc. complete as per instruction

of Engineer In Charge.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[19] Providing corrugated PPGL Sheets roofing fixed with Galvanized 200.00 Sqm 923.48

iron 'J' or 'L' hooks bolts and nuts 8 m. diameter with bitumen and

G.I.Limpet washers filled with white lead complete including

ridges, gutters etc. excluding the cost of purlins, rafters and

trusses. (1) 0.60 mm. Thick sheet

[20] Providing and fixing concertina coil fencing with punched tape 50.00 Rmt 387.05

concertina coil 600 mm dia 10 metre openable length ( total length

90 m), having 50 nos rounds per 6 metre length, upto 3 m height

of wall with MS angle with oil coat (40x40x5 mm ) ‘Y’ shaped

placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.

reinforced barbed wire, stud tied with G.I. stapes and G.I. clips to

retain horizontal, including necessary bolts or G.I. barbed wire tied

to angle iron, all complete as per direction of Engineer-in-charge,

with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick)

wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm

thick) and weight 43.478 gm/ metre etc. complete as per

instruction of Engineer In Charge.

[21] Repairing of existing wooden or any type of doors and window 15.00 Each 1161.50

including dismantling shutters repairing the same including

providing and fixing necessary missing or damaged fixtures and

fastening cutting edges for smooth opening and closing including

cutting bottom edge to match with flooring with necessary

repairing to frames, missing glass etc. complete.

Twelve Lakh Twenty Three Thousand Six Hundred Sixty Eleven Rupees and Fourty One Paisa Only

I/We am/are willing to carry out the work at…………………………………………….% above/below percent (Should be written in figures and words)

of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct…………………………% below Add…………………………% Above

In Worlds In Worlds

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Credit of dismantled materials of amount of Rs. 0.00/- must be recovered from contractor's 1st R.A. bill.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be included

in the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

Dated Signature of Dy. Executive Engineer Executive Engineer

the Contractor. R & B Sub Division R & B Division

Kapadwanj Kheda