Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹5.5 L
Closing Date
4 Jun 2026, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Technical Assistant-2
Formation of 18m wide roads (road no. 1, 2 & 3) including asphalting, construction of RCC side drains, inspection chambers, spur culverts & Water supply & valve works in Plot no. 665 at Vasanthanarasapura Industrial Area 3rd Phase, Tumakuru District.
KIADB/2026-27/OW/WORK_INDENT453
KIADB/2026-27/OW/WORK_INDENT453
Open
Other Works
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26). To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26).
Executed in any one financial year, the following minimum quantities of work: (Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/Government Undertaking Organizations). (1) Earthwork Excavation / Earthwork Embankment/ Earthwork for Subgrade: 5474 Cum, (2) Granular Sub Base/ Wet Mix Macadam: 2431 Cum, (3) PCC/RCC: 886 Cum, (4) TMT Steel Reinforcement: 37 Tonne, (5) BM/DBM/BC/SDBC: 373 Cum, (6) HDPE/PVC Pipes: 960 Rmtr
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,)
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 09 Months
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period (2021-22 to 2025-26). Achieved in at least two financial years a minimum financial turnover of Rs.731.00 Lakhs. (Civil Contract Works Only) (Not less than 2 times the amount put to tender)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.110.00 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
₹5,000
₹5.5 L
22 May 2026
22 May 2026
5 Jun 2026
27 May 2026
27 May 2026
Formation of 18m wide roads (road no. 1, 2 & 3) including asphalting, construction of RCC side drains, inspection chambers, spur culverts & Water supply & valve works in Plot no. 665 at Vasanthanarasapura Industrial Area 3rd Phase, Tumakuru District.
PART -1A: FORMATION OF ROADS & ASPHALTING 18m WIDE ROAD Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of st...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. complete with al...
Construction of sub-grade and earthen shoulders with approved material ( CBR min 10 %) obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to...
By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front en...
Providing laying spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per Sqm using mech...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg Sqm on Granular surface complete with all lead and lift etc, as per specificat...
Dense Graded Bituminous Macadam Grading II for traffic lesser than20 MSA Providing and laying Dense Graded Bituminous Macadam with100 TPH capacity HMP batch type using crushed aggregates ofspecified g...
Bituminous Concrete Grading II for traffic less than 20 MSA Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...
Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed ove...
Direction and Place Identification Signs upto 0.9 m2 SizeBoard. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheeti...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectoris...
Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading,excavated surfaces, disposing off or & stacking the selected earth for reuse m in...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Boundary Pillars :-Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting complete with all ...
Painting Two Coats on New Concrete Surfaces : Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete with all lead and lift ...
Marking of Road Boundary, Plot Boundary and Outer Boundary of Industrial Layout using Total Station Equipment including mobilization of neceddary men and machinary complete with all lead and lift etc,...
PART 2A: CONSTRUCTION OF RCC SIDE DRAINS Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading,excavated surfaces, disposing off or & s...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
PART 2B: CONSTRUCTION OF INSPECTION CHAMBERS Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentment using ordinary portland cement, ...
Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading,excavated surfaces, disposing off or & stacking the selected earth for reuse m in...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
PART 2C : Consutruction of Spur Culvert (Junction) Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading,excavated surfaces, disposing...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laiddown in clause 2504.2.2. of MoRTH specifications to a thicknessof not less than 60...
Part 3A: HDPE Dual Water Supply Line,Air Valve & Sluice Valve Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds o...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Supplying and laying at site Factory made perforated hard HDPE subsoil drainage pipes pre-wrapped with 150 gsm Geotextile for subsoil drainage system including all necessary coupling/ fittings for joi...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing & Fixing sluice valves/ Butterfly Valves (labour charges only) conforming to relevant ISS with latest amendments as detailed below for the following diameter and types with two Each of MJ co...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Part 3B: CONSTRUCTION OF VALVE CISTERN Earth work excavation for Foundation depth upto 3 m, as per drawing and technical out, shoring, strutting, barricading,excavated surfaces, disposing off or & sta...
Earth work in surface excavation by mechanical means for lowering & levelingthe ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Line No 2.pdf
Tender Document • 1.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .