Maintenance, Repairing, Renovation work for Ghatlodia Gaam Talati Office/Aganwadi Building and also Other Different Municipal Buildings in Ghatlodia ward on North West Zone.

Name of Work:- Maintenance, Repairing, Renovation work for Ghatlodia Gaam Talati Office/Aganwadi

Building and also Other Different Municipal Buildings in Ghatlodia ward on North West Zone.

Sr. No. Qty Description of Item Rate in Rs. Per Amount

1a 320 Excavation for foundation up to1.5 m depth 115.92 Cmt

including sorting out and stacking of useful

materials and disposing of theexcavated stuff

upto 50 Meter lead.(A) Loose or soft soil (SOR

WITHOUT GST AH.CITY-2023-24 - 04001A)

b 150 1.5 to 3.0 mt.depth (SOR WITHOUT GST 128.52 Cmt

c 80 Excavation for foundation for depth from 3.0 m to 141.11 Cmt

5.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil (SOR

WITHOUT GST AH.CITY-2023-24 - 04002A)

d 50 Excavation for foundation for depth from 1.5 m to 270.83 Cu.M.

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(C) Hard Murrum

2 250 Filling available excavated earth (excluding 129.10 Cmt

rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20 cm. in

depth consolidation each deposited layer by

ramming and watering.

3 100 Filling in plinth with sand underfloors 455.63 Cmt

including watering ramming, consolidating and

dressing etc. complete.

4 50 Filling in foundation and plinth with murrum or 286.20 Cmt

selected soil in layers of 20 cm. thickness

including watering, ramming and

consolidating etc.

5 70 Providing and laying cement 2492.51 Cmt

concrete1:5:10 (1-Cement: 5- coarses

sand and:10-hand broken stone aggregates

40mm nominal size) and curing

complete excluding cost of formworkin (A)

Foundation and Plinth (upto 10 ton).

6 50 Providing and laying cement 2634.11 Cmt

concrete1:4:8 (1-Cement: 4- coarses

and:8-hand broken stone aggregates 40mm

nominal size) and curing complete

excluding cost of formworkin (A) Foundation

and Plinth (upto 10 ton).

7 20 Providing and laying cement concrete 1:3:6 (1- 2956.44 Cmt

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth..

8 10 Providing and laying cement concrete 4006.15 Cmt

1:3:6 (1-Cement:3-coarse sand:6-hand

broken stone aggregates 20mm nominal

size) and curing complete including cost of

formwork in (A) wall caps/coping (upto

9 Providing and laying cement concrete

work 1:2:4 ((1-Cement:2- coarse sand:4-graded

aggregates 20mm nominal size) curing

complete excluding cost of formwork

and reinforcement.

a 100 Foundations, footings, base or columns and 3923.53 Cmt

b 35 Slabs, landing, shelves, balconies, lintels, 4012.47 Cmt

beams, girders and cantilivers upto floor

c 10 Independent piers, columns, and pillars, upto floor 4012.47 Cmt

10 70 Provdg. & laying cement concrete 1:2:4 (1 6487.07 Cu.M.

cement : 2 coarse sand : 4 graded stone

aggregates 20 mm nominal size) for

reinforced concrete chhajjas not exceeding

cm. thickness upto floors two level including

finishing the exposed surfaces with

cement mortar 1:3 (1 cement : 3 find sand) to give

a smooth and even surface centering and

form work and curing complete excluding

cost of reinforcement.

11 20 Providing and laying controlled cement concrete 3871.39 Cum

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings,Base

columns and Mass concrete

11A 25 Providing and laying in position Ready 3790.21 Cmt

Mixed M-150 grade concrete for

reinforced cement conctere work, using

cement content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work intransit

mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering

finishing and reinforcement including

cost of admixtures inrecommended

proportions as per IS:9103 to accelerate/

retard setting of concrete, improve work ability

without impairing strength and durability as

per direction of theEngineer-in-charge. Without

Fly Ash (Min cement level as per latest IS456

shall be maintained)

12 20 Providing and laying in position Ready 4793.10 Cmt

Mixed M-200 grade concrete for

reinforced cement conctere work, using

cement content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work intransit

mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering

finishing and reinforcement including

cost of admixtures in recommended

proportions as per IS:9103 to accelerate/

retard setting of concrete, improve work ability

without impairing strength and durability as

per direction of theEngineer-in-charge. Without

Fly Ash (Min cement level as per latest IS456

shall be maintained)

12a 10 Providing and laying controlled cement concrete 3977.88 Cum

M.200for curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings,Base

columns and Mass concrete

b 5 Walls, from top of foundation level upto floor two 4484.17 Cum

c 5 Slabs,landing,shelves,Balconies Lintels, Beams, 4460.36 Cum

Girders and Cantilever upto floor two level.

d 5 Columns, Pillars posts and struts upto floor two 4558.20 Cum

e 2 Staircases excluding landing upto floor two level 5418.91 Cum

f 2 Vertical and Horizontial its upto floor two level. 4701.97 Cum

13 100 Providing and laying in position Ready 4853.56 Cmt

Mixed M-250 grade concrete for

reinforced cement conctere work, using

cement content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work intransit

mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering

finishing and reinforcement including

cost of admixtures in recommended

proportions as per IS:9103 to accelerate/

retard setting of concrete, improve work ability

without impairing strength and durability as

per direction of theEngineer-in-charge. Without

Fly Ash (Min cement level as per latest IS456

shall be maintained) (Cement level 450 kg )

13A Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in

B 25 Foundations, footings, Base of columns and 4238.04 Cu.M.

C 20 Walls, from top of foundation 4519.88 Cu.M.

level upto floor two leve

D 20 Slabs,landing,shelves,Balconies, Lintels, Beams, 4496.07 Cu.M.

Girders and Cantilever upto floor two level.

E 5 Columns, Pillars posts and 4593.91 Cu.M.

struts, upto floor two level.

14 30 Providing and laying in position Ready Mixed M- 5043.66 Cum

300 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to site

of work in transit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of

admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing

strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min

cement level as per latest IS

shall be maintained)

15 4 Providing and laying in position Ready Mixed M- 5140.94 Cum

350 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to site

of work in transit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

laying, excluding the cost of centering shuttering

finishing and reinforcement including cost of

admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing

strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash(Min

cement level as per latest IS

shall be maintained)

15a 20 Providing and Laying ordinary cement 8341.79 Cum

concrete 1:2:4 (1-Cement 2-coarsesand: 4-

graded stone aggregates 20 mm nominal

size) and finishing smooth with curing etc.

complete including the cost of form work but

excluding the cost of reinforsement for R.C.C

work in (iv) Slabs having more than 13 cm and

upto 15 cm.thickness

15b 20 Providing and Laying ordinary cement 7380.23 Cum

concrete 1:2:4 (1-Cement 2-coarsesand: 4-

graded stone aggregates 20 mm nominal

size) and finishing smooth with curing etc.

complete including the cost of form work but

excluding the cost of reinforsement for R.C.C

work in (iv) Slabs having more than 8 cm and

upto 10 cm.thickness

15c 35 Providing and laying ordinary cement concrete 8634.45 Cum

1:2:4 (1- Cement 2- coarse sand : 4- graded

stone aggregates 20 mm nominal size) for R.C.C

lintel including finishing smooth with,curing etc.

complete including the cost of formwork but

excluding the cost of reinforcement.

16 Brick work using common burnt clay

building bricks having crushing strength

not less than 35kg./Sq.Cm.in foundation

and plinth in Cement Mortar1:5 (1-Cement

:5 - fine sand)

110 (A) Conventional (upto 10 ton) 4011.66 Cmt

35 B) Modular 4345.02 Cmt

17 Extra Rate for brickwork in Above Item for

super structure above plinth level upto floor two

level (B) Conventional

a 30 (A) Conventional (upto 10 ton) 272.25 Cmt

b 10 B) Modular 262.35 Cmt

c 10 C) above floor two level Item No. 2(6.13) (A) 42.66 Per Floor

Modular Per Cum

d 10 D) above floor two level Item No. 2(6.13) (B) 40.09 Per Floor

Conventional Per Cum

18 26 Half brick masonry in common brunt clay 593.90 Smt

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 ( 1-

Cement : 4 coarse sand ) in foundation

and Plinth conventional brickwork (up

to 10 ton) (B) Conventional

19 22 Extra for half brick masonry in super 52.80 Smt

structure above plinth level upto floor two

level (B) conventional

20 10 Providing and laying Pre cast Light weight 747.00 Sqm

concrete hollow core wall with hollow core

concrete unit of approved make & size of

mm thick, 600 mm wide and 2400 mm/ 2600 mm/

2850 mm/ 3000 mm/ 3300 mm in legth made

from of controlled cement concrete M20

having cube compressive strength not less than

20 MP a jointing with high strength & tensile

adhesion non-shrink cementitious joint

compound /P.U. Foam. (Plaster not required)

21 4 Providing and laying Pre cast Light weight 842.00 Sqm

concrete hollow core wall with hollow core

concrete unit of approved make & size of

mm thick, 600 mm wide and 2400 mm/ 2600 mm/

2850 mm/ 3000 mm/ 3300 mm in legth made

from of controlled cement concrete M20

having cube compressive strength not less than

20MP a jointing with high strength & tensile

adhesion non-shrink cementitious joint

compound/ P.U.Foam. (Plaster not required)

22 2 Providing and laying Pre cast Regular 777.00 Sqm

concrete hollow core wall with hollow core

concrete unit of approved make & size of

mm thick, 600 mm wide and 2400 mm/ 2600 mm/

2850 mm/ 3000 mm/ 3300 mm in legth made

from of controlled cement concrete M35

having cube compressive strength not less than

35 MP a jointing with high strength & tensile

adhesion non-shrink cementitious joint

compound/ P.U.Foam. (Plaster not required)

23 2 Providing and laying Precast Regular 875.00 Sqm

concrete hollow core wall with hollow core

concrete unit of approved make & size of

mm thick, 600 mm wide and 2400 mm/ 2600 mm/

2850 mm/ 3000 mm/ 3300 mm in legth made

from of controlled cement concrete M35

having cube compressive strength not less than

35 MP a jointing with high strength & tensile

adhesion non-shrink cementitious joint

compound /P.U.Foam. (Plaster not required)

24 Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting and

propping etc. height of propping and

centering below supporting floor to celling not

exceeding 4 M & removal of the same for

in situ reinforced or plain concrete work upto

floor four level

a 5 Foundation, footings, bases of columns etc. 171.68 Smt

and mass concrete.

b 5 (B) Flat surfaces such as soffits of supspened 252.00 Smt

floors slabs Landings and the like. (1) Floors etc.

upto 200 mm in thickness.

c 5 (B) Flat surfaces such as soffits of suspended 270.90 Smt

floor roof slabs Landings and the like. (2) Floors

etc. above 200mm in thickness.

d 3 Vertical surface such as walls (any thickness) 229.95 Smt

partitions and the like including attached

buttresses & string course & the like.

e 4 (ii) Sides And Soffits Of Beam, Haunchings 192.15 Smt

Cantilevers, Girders, Bressumers And

Lintels Not Exceeding 1 M In Depth.

f 3 (G) Columns PillarsPosts and struts. (1) Square 297.68 Smt

Rectangular Polygonal in plan.

g 3 (2) Circular or curved in plan. 422.10 Smt

h 2 (H) (2) Sides and soffits of Beams Beam 192.15 Smt

Haunchings canti-levers Girders Bressumers and

Lintels exceeding 1M.in Depth.

25 Providing and fixing 35 mm thick shutters for

Doors, windows and clear story windows

including anodised alluminium butt hinges

with necessary screws.

a 2 (A) Indian Teak Wood (ii) Fully Glazed. 4788.50 Smt

b 2 (B) Indian Teak Wood (ii) Fully Panelled 5478.89 Smt

c 2 (C) Indian Teak Wood (iii) Partly panelled and 5133.69 Smt

26 Providing and fixing 35 mm thick shutters for

Doors, windows and clear story windows

including black enamelled M.S.butt hinges

with necessary screws.

a 2 (A) Indian teak wood. (i) Fully 5285.45 Smt

Panelled.(upto 10 ton)

b 4 (A) Indian teak wood. (ii) Fully Glazed.(upto 4595.06 Smt

c 2 (A) Indian teak wood. (iii) Partly panelled and 4940.25 Smt

partly glazed. (upto 10 ton)

27 Providing and fixing 35 mm thick panelled,

glazed or panelled and glazed shutters for

Doors windows and clear story windows

including anodised alluminium But hinges with

necessary screws and indian teak wood

a 5 (A) Plywood sheet panels. 3178.88 Smt

b 4 (B) Particle board panels 3184.01 Smt

c 4 (C)Hard board panels. 3153.15 Smt

d 2 (D) Asbestos sheet panels. 3126.32 Smt

28 10 Providing and fixing 25 mm thick shutters for 3006.75 Smt

cup boards etc. including black enamelled

M.S. butt hinges with necessary screws.(A)

Indian teak wood. (i) Fully Panelled. (upto

a 3 Providing and fixing 25 mm thick shutters for 2594.74 Smt

cupboards etc. including anodised alluminium

butt hinges with necessary screws. (A) Indian

teak wood. (ii) Fully Glazed.

b 3 Providing and fixing 25 mm thick shutters for 2814.42 Smt

cupboards etc. including anodised alluminium butt

hinges with necessary screws. (A) Indian teak

wood. (ii) Partly panelled and partly glazed.

29 10 Providing and fixing plain asbestos cement 827.20 Smt

sheet 6 mm thick in partitions including

fixing to fames with screws etc, complete with

50 mm x 12 mm Deodar wood beading

(Frames to be paid separately) (upto 10 ton)

30 10 Providing and fixing in partitions 4 mm thick 516.60 Smt

medium hard board of approved quality

including fixing to fames with screws etc

complete with 50 mm x 12 mm teak wood

beading (Frames to be paid separately)

31 5 25 mm thick wooden shelves supported 1306.61 Smt

on 40 x 40 mm x 6 mm T or L iron brackets

fixed at suitable distances but not

exceeding 75 cm. apart with Mango wood

or equivalent quality. (upto 10 ton)

32 5 40 mm thick wooden shelves supported 1691.00 Smt

on 40 x 40mm x 6 mm T or L iron brackets fixed

at suitable distances not exceeding 75cm.

Apart with Mango wood or equivalent

quality. (upto 10 ton)

33 300 Providing and fixing M.S. round or square bars 68.53 kg

with M.S. flats at required spacing in wooden

frames of windows and clerestory

windows.(upto10 ton)

34 200 Providing and fixing M.S. grills of required 100.17 kg

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill. (upto

a 10 Providing and fixing M.S. grills of required 143.64 kg

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

alround, square or round bars with round headed

bolts and nuts or by screws (A) Ornamental Grill.

35 4 Providing and fixing glazed louvered 4102.54 Smt

glass windows and ventilators with teak

wood frame 10 cm. x 7 cm. size including

coats of oil painting to wood work etc.complete.

36 8 Providing and fixing glazed louvered 4332.47 Smt

glass windows and ventilators with teak

wood frame 10 cm.x7 cm. size including

coats of oil painting to wood work

etc.complete.with wooden louvers plank 12mm

thick (upto 10 ton)

37 20 Providing and fixing 35 mm thick shutters for 3211.96 Smt

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures

and fastenings including primer coat of

approved quality and two coats of oil painting etc,

complete.(ii) Fully Glazed.

38 5 Providing and fixing 35 mm thick shutters for 3902.35 Smt

Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm.

size including black enamelled iron oxidixed

fixtures and fastenings including primer coat

of approved quality and two coats of oil painting

etc, complete.(ii) Fully Panelled.

a 5 Providing and fixing 35 mm thick shutters for 3557.15 Smt

Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x 7 cm.

size including anodized alluminium fixtures

and fastenings including primer coat of approved

quality and two coats of oil painting

etc, complete. (iii) Partly panelled and partly

39 16 Providing and fixing 30mm thick FACTORY MADE 2214.00 Smt

SOLID BOTH SIDE PRELAM PANEL PVC DOOR

SHUTTER consisting of frame made out of

M.S.tubes of 19 gauge thickness and size of

19mm x 19mm for stiles, top and bottom rails.

M.S. frame shall have a coat of steel primer of

and manufactures. M.S frame covered with 5mm

thick heat moulded prelim PVC ‘C’ channel of siz

30mm thickness, 70 mm width of which 50mm

shall be flat and 20mm shall be tapered in

degree Angle on either side forming stiles, and

5mm thick, 95mm wide pream PVC sheet out of

which 75mm shall be flat and 20mm shall be

tapered in 45 degree on the inner side ot form top

and bottom rail and 115mm wide prelim PVc

sheet out of which

75nmm shall be flat and 20mm shall be - 75nmm

shall be flat and 20mm shall be tapered on both

side to form lock rail, Top, bottom

and lock rails shall be provided either side of the

panel. 10mm (5mm x 2) thick 20mm wide cross

PVC sheet shall be provided as gap insert for top

rail and bottom rails. Panelling of 5mm thck both

side prelim PVC sheet to be fitted in the M.S.

frame welded,sealed to the stiles and rails with

7mm (5mm + 2 mm) thick x 15mm wide PVC

sheet beading on inner side, and joined togeth

solvent cement adhesive. An additional 5mm

thick PVC strip of 20mm width is to be stuck on

the interior side of the ‘C” chanel using PVC

solvent adhesive etc. complete as per direction of

Engineering in charge, manufacture’s

specification and rawing.

40 55 Providing and fixing in position collapsible 5391.23 Sq.M.

steel shutters with vertical channels 20 x

x 2 mm braced with flat iron diagonal 20 x6 mm

size with top and bottom rails T iron 40 x 40 x

mm with 38 mm dia steel pulleys complete with

bolts, units, locking arrangements, stoppers,

handles, including a priming coat of red

lead paint & approved make.

41 10 Providing and fixing 1 mm thick M.S. sheet 3652.12 Sqm

sliding shutters with frame and diagonal

braces of 40x40x6 mm angle iron, 3.15 mm

M.S.gusset plates at Junctions and corners

mm dia. pulley, 40x40x6 mm angle and

T-iron huide rail at top and bottom

respactively with handles, stoppers and locking

agangement etc, including applying a

priming coat of red lead paint. (upto 10 ton)

42 12 Providing and fixing rolling shutters of approved 3468.72 Sqm

make made of 80 mm wide M.S.laths

inter-locked together through their entire length

and jointed together at theends by end locks

mounted on specially designed pipe shaft

with bracket plates, guide channels and

arragements for inside and out side

locking with push-pull operation including

the cost of hood cover and spring etc.

complete. (A) Shutters having width below

a 3 Providing and fixing rolling shutters of approved 4450.51 Smt

make made of 80 mm wide M.S.laths

inter-locked together through their entire length

and jointed together at theends by end locks

mounted on specially designed pipe shaft

with bracket plates, guide channels and

arragements for inside and out side

locking with push-pull operation including

the cost of hood cover and spring etc.

complete. (A) Shutters having 3.5 M. &

43 20 Providing and fixing extruded aluminum window 2119.14 Smt

having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @

Wt. 1.205 Kg/mt,vertical member of size

Kg/mt with sliding shutters of horizontal member

18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent

bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc complete for window.

44 10 Providing and fixing window having extruded 1696.73 Sq. M.

aluminum Colour anodized section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt

Kg / Rmt, horizontal two track member size

vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm

x 1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings

and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for

45 10 Providing & Fixing in position Alluminium 1288.93 Sq. M.

vents with frame using approved anodised

extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium)

units equivalent Approved Rate)Frame section

of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl.

Providing & Installing 5 mmthick approved color

Acrylic sheet of standard quality etc. comp.

46 5 Providing and fixing standared extruded of 1163.92 Sq. M.

alluminium section of size 63 mmx38.10

mmx1.2 mm (Jindal Section:2434, @ Wt.0.643

Kg/mt) with colour anodized alluminium

frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

47 4 Providing and fixing standared extruded of 1509.90 Sq.M.

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour Powder

Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as

details etc complete for Fix Partition

48 2 Providing and laying 40 mm thick marble 749.70 Sqm

chips flooring rubbed and polished (I.E.terrazo)

to granolithic finish with under layer 30 mm thick

cement concrete1:2:4 (1-Cement: 2-coarse

sand: 4-graded stone aggregate 10 mm

and down gauge) and to player 10 mm thick

with white, black or white and blak marble cihps

of required sizes from 1 mm to 4 mm nominal size

laid in cement marble powder mix 3:1 (3-

Cement:1-Marble powder by weight) in

proportion of 4:7 (4- Cement: 7-marble

chips by volume) (C) Medium Shade

pigment with approx 50% white cement and

50% ordinary cement (In top layer only) (upto

49 4 Providing and laying marble chips skirting 869.40 Sqm

(Terrazo) or dedo rubbed, and polished to

Granolithic finish to player 6 mm white, black or

white and black marble chips of size from

smallest to 4 mm nominal size laid in cement

marble powder mix 3:1 (3-Cement:

marble powder by weight) in proportion of 4:7 (4-

cement marble powder mix: 7-marble chips by

volume) (B) Light shade pigment with white

cement (In top layer only)

50 4 Providing and laying white glazed tiles 6mm thick 908.17 Sq.M.

in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand ) finishing with flush pointing in

51 20 Providing and laying Ceramic tiles 6 mm thick 960.47 Sq.M.

in flooring treads of steps and landing laid on a

bed of 12 mm thick cement mortar 1:3 (1- cement

:3-coarses and) finishing with flush pointing in

white cement. (upto 10 ton)

52 20 Providing & Fixing 2mm Aluminium / 4mmACP 5832.20 Smt

sheeting fixed with Type-11 Class-C High

Intensity Grade Sheeting as per IRC 67 :

reflective sheeting of size including lettering and

53 60 Providing and laying Vitrified tiles 8 to 10 mm 1469.91 Sq.M.

thick, 36''x36'' in flooring treads of steps and

landing laid on a bed of 12 mm thick

cement mortar 1:3 (1-cement:3-coarses and)

finishing with flush pointing inwhite cement. (upto

54 80 Providing and laying Vitrified tiles 8 to 10 mm 1062.50 Sqm

thick, 24''x24'' in skrting risers of steps and dedo

on 10 mm thick cement plaster 1:3 (1-

cement: 3-coarse sand) and jointed with

white cement slurry (upto 10 ton)

55 65 Providing and laying Vitrified tiles 8 to 10 mm 1523.61 Sqm

thick, in skrting risers of steps and dedo on

mm thick cement plaster 1:3 (1-cement:3-

coarse sand) and jointed with white cement

slurry (upto 10 ton)

56 30 Providing and laying 24" x 24" vitrified 1527.00 Sq. M.

Tiles 8 to 10 mm th. Double Charged

gloosy/ Matt of Approved make as approved

by Adl.C.E. / consultants in flooring over

mm thick cement mortar 1:6 (1 cement :

coarse sand)on new surface& jointed with

colour cement slurry incl with flush

pointing & cleaning the surface etc. comp.

57 25 Providing and laying 24" x 24" vitrified 8 to 165.00 Rmt

10 mm th.Double Charged Gloosy / Matt

tiles of Approved make as Approved by

Adl.C.E. / Consultants for upto 10 cm high

skirting as approved by Engineer in charge

over 10 mm thick cement mortar 1:6 (1 cement :

6 coarse sand)on new surface& jointed with

colour cement slurry incl with flush pointing &

cleaning the surface etc. comp.

58 160 Providing and laying polished Kota stone slab 982.83 Sq.M.

flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and)

or L.M.1.1.5 (1-Lime putty:1.5-coarses

and) laid over and jointed with grey cement

slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc.

complete. (A) 25 mm thick (upto 10 ton)

59 4 Providing and laying marble stone slab flooring 2194.63 Sq.M.

over 20mm (average)base of cement mortar 1:6

(1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime

putty : 1.5 - coarse sand) laid and jointed with

gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm

60 4 Providing and laying polished Kota stone slab 1085.48 Sq.M.

flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and)

or L.M.1.1.5 laid over and jointed with grey

cement slurry including rubbing and

polishing etc.complete. (B) 30 mm thick (upto

61 4 Providing and laying polished kota stone slab 25 1176.03 Sq.M.

mm thick in risers of steps, skirting Dedo and

pillars laid on 10 mm thick cement mortar 1:3 (1-

Cement :3 coarses and) and jointed with

gray cement slury mixed with pigment to

match the shade of slab including rubbing

and polishing etc.complete. (upto 10 ton)

62 3 Providing and laying cement concrete 297.68 Sq.M.

flooring 1:2:4 (1-cement: 2-coarses and:4-

graded stone aggregate 20mm nominal size)

laid in one layer and finished with a floating

coat of neat cement. (A) 40mm thick. (upto

63 3 Providing and laying cement concrete 348.08 Sq.M.

flooring 1:2:4 (1-cement: 2-coarse sand:4-

graded stone aggregate 20mm nominal size)

laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick. (upto

64 3 Providing and fixing pre-cast concrete 376.43 Rmt

kerb stone of gray cement based concrete

block 30 cm length, 30 cm height and 15 cm

thick of M200 grade concret as per approved

design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3

(1 cement :3 fine sand) etc complete. (upto

65 2 Providing and fixing pre-cast Rubber Dye / steel 680.10 Smt

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc.

66 35 Providing and laying broken china mosaic 739.89 Sqm

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them up

to15 cm along the wall, clearing with water

and oxalic acid etc.asdirected.

67 5 Providing and laying coloured glazed tiles 1426.95 Sqm

of the size 300 mmx200 mmx8 mm/300

mmx450 mmx8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement

plaster 1:3 (1cement: 3 coarse sand) &

jointed with white cement slurry.

68 25 Providing corrugated G.I. sheet of class-3 719.93 Sqm

roofing fixed with glavanished iron J or

L Hooks, Bolts and nuts 8 mm diameter with

bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1)

mm thick sheet.(up to10 ton)

69 5 Providing ridges or hips 600 mm over allin 635.58 Sqm

plain G.I. sheet class-3 fixed with G.I. J or L

Hooks and nuts 8 mm dia G.I. Limpet and

bitumen washer complete. (1)

70 5 Providing and fixing 150 mm wide 450 mm over 555.71 Sqm

all semi circular plain G.I.sheet class-3 gutter

with Iron brackets 40 mmx3 mm size Bolts, Nuts,

washers etc. including making necessary

connection with rain water pipes. (i) 0.80 mm thick

71 2 Providing and fixing five courses water 466.84 Sqm

profing treatment with bitumen felt

consisting of second and fourth course of

blown/ bitumen or/and residual bitumen

applied hot at 1.2 kg.per Sq.M.of area for

each course and first course with fibre

base bitunen saturated under lay type land third

course with fibre base self finished felt type

grade 1 and fifth and final course of stone grit

mm and down size or pea sizes gravel

Cu.Metre/Sq.metre preparation of surface

excluding grading complete. (upto 10 ton)

72 50 Providing and fixing on wall face C.I. Rain 283.62 Rmt

water pipe including filling the joints with spun

yarn soaked in neat cement slurry and

cement mortar 1:2(1- Cement : 2-fine sand)

73 220 Providing 15 mm thick cement plaster in 174.83 Sqm

single coat on Rough (Similar) side of single or

half brick walls for interior plastering up to floor

two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement :3-sand)

74 450 Providing 20mm thick sand faced cement plaster 215.78 Sqm

on walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

75 100 Colour washing with lime on wall surface 12.29 Sqm

(two coats) over and including a primary

coat of white washing to give an even shade

after through brooming the surface to remove

all dirt, dust, mortar drops and other foreigh

76 813 Removing dry or oil bound distemper 11.19 Sqm

by a washing and scraping and sand

papering the wall surface smooth including

necessary repairs to scratches complete.

77 2000 Distempering with dry distemper of approved 46.94 Sqm

brand and manufacture (two coats) and of

required shade on wall surfaces of given an

even shade, over and including a priming

coat of whiting after thoroughly brooming

the surface free from mortar dropping

and other foreign matter.

77 a 2000 Extra Coat for Above Item over above for 30.09 Sqm

every subsequent coat of approved brand

and manufacture.

78 1000 Distempeing (Two coats) with oil bound 76.08 Sqm

distemper of approved brand and

manufacture and of required shade on wall

surfaces to give an even shade, over and

including a priming coat with distemper

primer of approved brand and

manufacture after thoroughly brushing the

surface free from mortar dropping and other

foreign matter and also including

preparing the surface even and sand papered

79 1000 Extra Coat for Above Item over above for 8.04 Sqm

every subsequent coat of approved brand

and manufacture.

80 3500 Wall painting (two coats) with plastic 78.44 Sqm

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly brushing

the surface free from mortar droppings and

other foreign matter and sand papered smooth.

81 3500 Extra over item for every sub sequent coat of 33.39 Sqm

wall painting with plastic emulsion paint of

81 a 1500 Extra over item for painting with plastic emulsion 5.36 smt

paint of approved brand on ceilings and sloping

82 2000 Applying priming coat over new steel and 34.34 Sqm

other metel surface after and including

preparing the surface by throughly cleaning,

oil, grease, dirt and other foreign matter

and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

priming paint brushing red lead.

83 1000 Painting two coats (excluding priming coat) 86.94 Sqm

on new steel and other metal surface with

enamel paint, brushing, interior to give an even

shade including cleaning the surface an even

shade including cleaning the surface of all dirt,

dust and other foreign matter.

84 1520 Painting one coats (excluding priming coat) 54.35 Sqm

on previously painted steel and other metal

surface with enamel paint, brushing to give an

even shade including cleaning the surface of all

dirt, dust and other foreign matter.

85 1000 Extra over item for 83 & 84 every sub sequent 50.40 Sqm

86 1000 Painting two coats (excluding priming coat) 64.66 Sqm

on new steel and other metal surface with

synthetic enamel paint, brushing to give an

even shade including cleaning the

surfaceofalldirt,dust and other foreign matter.

87 1000 Painting one coats (excluding priming coat) 43.79 Sqm

on previously printed steel and other metal

surface with synthetic enamel paint, brushing to

give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

88 500 Extra over Above item for 86 & 87 for every 43.47 Sqm

sub sequent coat of paint.

89 500 Painting two coats (excluding priming coat) 20.16 Sqm

on external surface of new rain water, soil,

waste and vent pipes and fittings with ready

mixed bituminous brushing, black, anti

corrosive to give an even shade including

cleaning of all dirt, dustand other foreign

matter.(75 mm dia)

90 800 Painting two coats (excluding priming coat) 25.05 Sqm

on external surface of new rain water, soil,

waste and vent pipes and fittings with ready

mixed bituminous brushing, black, anti

corrosive to give an even shade including

cleaning of all dirt, dust and other foreign

matter.(100 mm dia)

91 800 Painting two coats (excluding priming coat) 40.17 Sqm

on new wood and wood based surface with

enamel paint, interior to give an even shade

including cleaning the surface of all dirt,

dust and other foreign matter sand papering

and stopping. (a) Ready mixed paint

brushing wood primier pink.

92 200 Painting one coats (excluding priming coat) 40.17 Sqm

on previously painted wood and wood based

surface with enamel paint, to give an even shade

including cleaning the of all dirt, dust and other

foreign matter.(b) Ready mixed paintbrushing

priming for enamel

93 200 Extra over Above item for 91 & 92 every sub 36.39 Sqm

sequent coat of paint.

94 200 Painting two coats (excluding priming coat) on 104.12 Sqm

new wood and wood based surface with ready

mixed paint, brushing, oil, gloss, semi gloss to

give and even shade including cleaning of all

dust, dirt and other foreign matter sand papering

95 2000 Finishing wall with weather proof exterior 113.40 Sqm

emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

96 2000 Applying two coats of putty & two coats of primer 40.19 Sqm

of approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth.

97 200 Painting two coats (excluding priming coat) 87.11 Sq.M.

on new wood and wood based surface with

enamel paint, interior to give an even shade

including cleaning the surface of all dirt,

dust and other foreign matter sand papering

98 20 Writing letter or figures on any surface 3.47 per letter

with black japan paint (stops, comas, per Cm/Ht

hyphens and the like not to be measured and

paid for separately) (i) Block

(Letters/Figures) (Per 10 Letter pet CM.HT)

99 10 Extra over items for using thick white paint 0.07 per letter

instead of black japan paint. (i)Block per Cm/Ht

(Letters/Figures)

100 10 Polishing with french polish on new wood and 131.67 Smt

wood based surface to give an even surface

including cleaning, the surface of all dirt, dust and

sand papering smooth and including a coat of

101 5 Extra over items for using thick white paint 0.07 per letter

instead of black japan paint. (ii) Indian perCm/Ht

(Letters/Figures)

102 10 Painting lines, deashes, arrows, letters etc on 121.91 Sqm

roads, Air fields and like in two coats with road

marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign

matter. (i)Over 10cmi n width

103 10 Painting lines, deashes, arrows, letters etc on 12.14 Rmt

roads, Air fields and like in two coats with road

marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign

matter.(ii) Upto 10 cm in width

104 10 Painting lines, deashes, arrows, letters etc on 50.40 Sqm

roads, Air fields and like in one coats with road

marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (i)

Over 10cm in width

105 10 Painting lines, deashes, arrows, letters etc on 5.52 Sqm

roads, Air fields and like in one coats with road

marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign

matter. (ii) Upto 10cm in width

105 A 2 Painting the kids picture chart & letter writting of 5803.57 Wall

different size and shapes as per details/design

etc.comp. as dire.by engineer in charge

106 100 Demolition including stacking of serviceable 1047.38 Cu.M.

materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

107 450 Demolition of Brick work and stone masonry 544.95 Cu.M.

including stacking of serviceable materil as

and disposalof unserviceable materials with all

lead and lift.(ii) In Cement Mortar.

107 A 200 Demolition of terrace including stacking of 63.00 Smt

serviceable materilas and disposal of

unserviceable materials with all lead and lift.(i)

Brick tile covering.

108 220 Dismentaling tiled of stone floors laid in mortar 47.25 Sqm

including stacking of serviceable materil as and

disposal of unserviceable materials with all

109 15 Dismentaling of sheet roofing including 47.25 Sqm

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materil as and disposal of

unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

109 A 5 Dismentaling of sheet roofing including 53.55 Sqm

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materil as and disposal of

unserviceable materials with all lead and lift.(i)

A.C. sheet roofing.

110 5 Dismentling steel work including distempering 3.63 Kg.

and stacking the materials with all lead and

111 4 Dismentling doors, windows, ventilators 185.85 Each

etc. (wood or steel) shutters including

chowkhats architraves, hold fasts and other

attachment etc. complete and stacking the

material within all lead and lift.(i) Not exceeding

112 10 Dismentling doors, windows, ventilators 248.85 Each

etc. (wood or steel) shutters including

chowkhats architraves,hold fasts and other

attachment etc. complete and stacking the

material with in all lead and lift.(ii) Exceeding

113 10 Dismentling barbed wire in fencing including 66.15 Rmt

making rolls and also including dismentling

fencing posts including all earth work concrete in

base and making good the disturbed

ground stacking useful materials as

directed and disposing as directed

and disposing of the unserviceable

materials with all lead and lift.

114 10 Dismentling C.I. pipes G.S.W. pipes abd 74.03 Rmt

A.C. rain water pipes with fittings and clamps

including stacking the materials with all lead and

lift (for any dia, of pipe)

115 10 Dismantling santtary fittings like wash basin . 401.63 Each

W.C. pan Indian and Europe an type, flushing

tank etc. including stacking the materials with

all lead and lift

116 10 Scraping oil paint from steel and other metal 48.83 Smt

surface and making the surface even (with

Hand Scraping.)

117 10 Removing and scraping of old deteriorated 19.38 Smt

plaster of any thickness from wall /

R.C.C member including stacking of

serviceable material and disposal of

unserviceable from site of work with all lead and

118 5 Providing and fixing M.S. fan clamps of 168.53 Each

shape and size as specified in existing

R.C.C. slab including cutting chase and making

119 4 Cutting out cracks of roof terrace to V-section, 64.58 Rmt

cleaning out, wetting, grouting with cement

and sand slurry 1:3 (1-cement 3-sand ) (upto

120 4 Cutting out cracks roof terrace to V-Section 75.29 Rmt

cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1

by weight) (up to 10 ton)

121 3 Providing & Fixing in position Alluminium 2900.00 Sq. M.

doors with frame using approved quality

anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b)

Shutter bottom vertical & top section

Shutter bottom section at 114.3x44.45 mm at

(1.37 kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing

mm thick approved color Acrylic sheet of

standard quality fixed with glazing chips on

upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction

of engg.in charge.(N.S.)

122 2 Providing & Fixing in position Fully Panelled / 4583.00 Sq.M.

Partly Panelled Partly Glazed / Fully Glazed

Alluminium doors with frame using approved

quality anodised extruded alluminium

section of 1.5 mm thickness as approved by

Engg. In charge.(Jindal alluminium )(a) Frame

sections 101.6x44.45 mm b) Shutter vertical

& top section 83.5x44.45 (wt.

kg/mt.)( at 1.31 kg/mt) © Shutter bottom

section at 114.3 x44.45mm at ( 1.37 kg/mt )

Shutter middle section at 100x44.3 wt. (1.37

kg/mt ) incl. providing & installing 5 mm thick

Glass of standaed quality fixed / 12 mm

thick Laminated sheet with glazing chips (wt.

0.13 kg/ Rmt) in panels etc. comp. as per

Detail Given & direction of engg.in charge.

123 2 Providing & Fixing in position Alluminium 4518.00 Sq. M.

window 2/3/4 track sliding / fix type with

frame using approved anodised extruded

alluminium section of minium thickness of 1.5 mm

as approved by Engg. In

charge.(Jindal alluminium) units equivalent.

including P/F installing 5 mm thick clear/tinted

Glass of standard quality etc.comp.

124 3 Providing and fixing standared extruded of 1815.14 Sq. M.

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour Powder

Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as

details etc complete for Fix window.

125 2 Providing and fixing of Ridge flashing for 458.85 Sqm

roof panel shall be made out of 0.5 mm

thick pre coated GI sheet. The Pre

coatedsheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and

shall have zinc coating of minimum 120 gsm

as per IS:277:1992, 5-7 microns epoxy

primer on both side of the sheet and polyester

top coat 15-18 micron. The PP GI Sheet

shall have plastic protective guard film of

minimum 25 microns to avoid scratches

during transportation. The ridge shall be fixed to

the steel members by poprivetor self

drilling/self stitching fastners @ maximum

450mm c/c along length of capping/flashing etc

126 2 Supplying and fixing vinyl flooring over the 963.00 Smt

surface having 1-2 mm thickness as per

directed by engineer incharge etc as

completed (N.S.)

127 2 Providing and laying 15mm bamboza 2690.00 Smt

wooden flooring as per architect's drawing

with all necessary details as directed by the

project consultants. Use underlay for

better result as per Detail specifications and

directed by the project consultants. (N.S.)

Approved Rate )

128 52 Providing and fixing 1.20 Metre high fencing 385.40 Rmt

with 2.0 Metre long M.S. Angle posts 40 mm x

40 mm x 6 mm and oil painting 3 coats fixed

at 2.5 Mt, C/c. with five Horizontan lines

and two diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre, strained

and fixed to posts with G.I, staples including

fixing the posts in ground with 0.5 M x 0.5.M x

0.5 M. block in C.C 1:5:10 etc complete.

129 10 Dismentling barbed wire in fencing including 66.15 Rmt.

making rolls and also including dismentling

fencing posts including all earth work concrete in

base and making good the disturbed ground

stacking useful materials as directed and

disposing as directed and disposing of the

unserviceable materials with all lead and lift.

130 4 Constructing a sink (chowkedi) with C.C. 2235.66 Rmt

1:2:4, 12 cm. thick over B.B. masonry in C.M,

(1:6) in front and dwarf wall 1.0 Mt. high and

cm. thick cement plaster to masonry / in

C.M.1:3) and cement concrete flooring in 1:2:4:

mix 5cm.dia.drain pipe etc.complete.

131 2 Constructing a cooking platform 60 cm. width 933.98 Rmt

and 70 cm high resting on B.B. Masonry walls

23 cm. thick in C.M. (1:6) with (i) Fixing or

precast R.C.C. 1:2:4) 8 cm. thick slab with

marble chips set in C.M. (1:6) (6 mm thick

terrazo) with plastering on exposed faces

walls in C.M. (1:4) etc complete.

132 100 Making 15 mm groove in RCC work on road and 30.00 Rmt

filling it with polysulfied selant and finished it good

incl. all all labour charges etc. comp as directed

133 220 P/A Tremix with dewartering machine and 54.00 Sq.M.

floater machine on constructed CC work for

finishing the surface as per requirement. The

rate including all machinaries, labor, loading,

unloading, transportaion etc complete as

per direction given by engineer incharge.

134 150 Carring out timber treatment to all wood work 54.98 Smt

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labour and material etc.

complete. Using Chlordene 20 EC. As

Per 6113_part III Consentration Weight1.00

percent is recommended one litre chemical

emulsion dillute with 9 liter of kerosene

precent concentration. Total dillute

concrentration will be 10 litre inclusive of

the litre chemical emulsion appication

0.75 / Litre chemical per one Sqmt printed two

coat wood surface.

135 55 Applying general insecticide pest control 88.40 Smt

treatment to floors, cup boards etc

including labour material etc. complete.

Using Heptachloride 20 EC. As Per

6113_pests Consentration Weight

percentis recommended one litre chemical

emulsion dillute with 39 liter of water will give.

Total dillute concrentration will be 40 litre

inclusive of one litre chemical emulsion

appication 0.5 Litre chemical / Sqm of

surface is recommended as per I.S

136 20 Carring out plinth treatment to post construction / 104.90 Smt

existing structure by spraying chemical

solution for termite control treatment including

labour and material consist ment with I.S.

specification. Using Chlordene and Chior

purfiles 20 EC. As Per 6131_paret-II

Consentration Weight on percentis recommended

i.e one litre 20 EC chemical emulsion with

19 liter give 1% concrentration inclusive of one

litre chemical emulsion appication

attherate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

137 20 Carrying out wall treatment for termite 37.34 Smt

control including spraying with chemical

solution in oil base (0.5 Lit./Sq.M.) including

labour and material Using Hepachlor

concentration 20 EC. As Per

IS.6316_paret-II Consentration by Weight

0.50 percentis recommended i.e one

litre chemical emulsion dillute with 39 liter

go fIS concrentration total dillite concentration

will be 40 litre inclusive of one litre chemical

emulsion appication at the rate of 7.5 Litre

chemical / Sqm of surface is recommended as

138 3000 Providing erecting and fixing double 3.91 Litre

coated Syntex PVC.(ISI) water tank of

required capacity each with all necessary fittings

and connection etc. complete on terrace.

139 Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade)

of the following nominal bore, tube fitting and

clamps including making good the wall ceiling and

10 (A) 15mm (upto 10 ton) 23001AA 244.13 Rmt

10 (B) 20mm (upto 10 ton) 23001BA 297.25 Rmt

5 (C) 25mm (upto 10 ton) 23001CA 393.93 Rmt

5 (D) 32mm (upto 10 ton) 23001DA 491.51 Rmt

5 (E) 40mm (upto 10 ton) 23001EA 596.73 Rmt

5 (F) 50mm (upto 10 ton) 23001FA 779.60 Rmt

140 Providing and laying in trenches galvanised

mild steel tubes (Midium grade) of the

following nominal bore, and tube fitting

(Earth work in trenches to be measured

and paid for separately)

5 (A) 15mm (upto 10 ton) 23002AA 150.91 Rmt

5 (B) 20mm (upto 10 ton) 23002BA 190.97 Rmt

5 (C) 25mm (upto 10 ton) 23002CA 279.39 Rmt

2 (D) 40mm (upto 10 ton) 23002DA 421.12 Rmt

2 (E) 65mm (upto 10 ton) 23002EA 716.66 Rmt

2 (H) 80mm (upto 10 ton) 23002HA 910.69 Rmt

141 2 Making connection of galvanised Mild steel 600.08 Each

distribution branch with galvanised mild steel

main 50 mm to 80 mm nominal bore by

providing and fixing tee including cutting and

threading the pipes complete.

142 Providing and fixing to wall ceiling and floor 6.0

Kg.F/Cm2 working pressure poluthene pipes of

the following out side Dia. Low densidy,

complete with special falnge compression

type fittings,wall clips etc.including making

good the wall ceiling and floor.

143 Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene

pipes of the following out side Dia. Low

densidy, complete with special falnge

compression type fittings, wall clips etc.

including making good the wall ceiling and floor.

144 10 Providing and fixing cast iron (Spun) 600.08 Each

Nahni trap of the following nominal diameter of

self cleaning design with C.I. screaed down

or higned grating including cost of cutting

and making good the walls and floor 100 mm inlet

and 50 mm outlet.(C)100mm dia.

145 12 Providing and fixing water closet squatting 926.10 Each

Pan (Indian type W.C.Pan) size

mm (Earth work, bed concrete, foot rest and

trap to be measured and paid for separately)

(A) Vitreous China. (I)Long pattern = White

146 8 Provdg. & fixing wall mounted White / 4250.00 No.

Color Vitreous China European water

closet with integral P trap of "Cera" -

Clair Series or equivalent incl. seat cover

Chair Bracket etc. complete as per direction of

engg. In charge.(N.S.)

147 15 Providing and fixing wsh down water closet 1290.80 Each

(Europe an type, W.C.Pan) with integral P or S

trap including jointing the trap with soil pipe in

Cement Mortar1:1 (1- Cement:1-fine sand)

(Seal and cover to be measured and paid

forseparately) (A) vitreous China Pattern :(i)

in white colour

148 9 Providing and fixing Urinal of approved quality 1535.63 No.

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

149 10 Providing & Fixing Angle cock of " Ess Ess" - 403.39 No.

Trend series or equivalent standard make

as approved by engg. in charge all complete.

149 A 10 Providing & Fixing pillar cock of " Ess Ess" - 641.53 No.

Trend series or equivalent standard make

as approved by engg. in charge all complete.

150 10 Providing and fixing 100 mm size P or S 311.85 Each

trap for water closet squatting pan including

jointing the trap with the pan and soil pipe in

cement Mortar1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.Pattern in white colour

151 12 Providing and fixing washbasin with single hole 1400.18 Each

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i)

In white colour.

152 12 Providing and fixing Kitchen sink with C.I. or 2257.69 Each

M.S. brackets, painted white including cutting

holes in walls and making good the same but

excluding fittings. © Vitreous China Sink. (i)

mm x 450 mmx 150 mm size

153 9 Providing and fixing 600 mm x 450 mm bevelled 825.48 Each

edge mirrror of superior glass mounted on

6 mm thick A.C. sheet or ply wood sheet and

fixing to wooden pluge with C.P. brass screws

154 Providing and fixing chromium plated brass

halftrun flush cock of approved quality including

fixing in pipe line etc. complete.(ii) 25mm dia.

155 5 Provdg. & fixing White / Color Vitreous 2950.00 No.

china Counter wash basin with signle hole for

pillar tap of "Cera " - Concord series of

x425 mm size to be fiited in stone counter with

necessary brackets painted white incl.

cutting holes and making good the same

.Cost Includes P/F C.P. brass waste

coupline, 32 mm dia fisher union ,15 mm dia.

Pillar cock & Angle cock of " Ess Ess"- Trend

series ,32 mm dia. Waste pipe etc.

complete as per dir. of engg. in charge.

156 500 Finishing wall with water proofing cement paint of 56.87 Smt

on wall surfaces (Two coats) to give an approved

brand and manufacture and of required shape

even shade after thoroughly brushing the surface

to remove all dirt and remains of loose powered

156 a 500 Extra over Item 156 for every subsequent coat of 31.82 Smt

water proofing cement paint of approved brand

and manufacture.

157 2 Providing & Fixing S.S.304 Grade Sink of 4650.00 No.

Nirali / Krishna or Equivalent Make for

Kitchen Platform of size : 24":x18" as per

Direction of engg. In charge

157A 2 Providing and fixing Kitchen sink with C.I. or M.S. 2257.69 Each

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. (C) Vitreous China Sink.(i) 600mm x

450mm x 150mm size

158 2 Providing and fixing C.P. brass towel rail 597.22 Each

comlete with C.P.brass brackets fixed to

wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

159 2 Providing and fixing 600 mmx120 mm glass 561.03 Each

shelf with C.P. brass bracket and guard rail

complete mixed to wooden plug with C.P.brass

160 2 Providing and fixing toilet paper holder. (A) 414.53 Each

161 2 Providing and fixingof S.S. Railing pipe 50 mm x 1004.24 Rmt

16 G ASIS 304 Grade as per instruction of

engineer in charge.

162 Providing and fixing screw down bib taps of

following size. (B) Brass chromium plated screws

10 (i) 15mm dia. 23028A1 184.98 Each

10 (ii) 20mm dia. 23028A2 212.68 Each

163 Providing and fixing screw down bib taps of

following size. © Gun metal screw down bib tap.

10 (i) 15mm dia. 23028C1 157.29 Each

10 (ii) 20mm dia. 23028C2 176.09 Each

164 Providing and fixing pillar tap, capstan head,

screw down high pressure with screws,

shanks and back nuts.

10 (i) 15mm dia. 23029A 305.67 Each

10 (ii) 20mm dia. 23029B 351.18 Each

165 Providing and fixing Gun metal check or

non-return fullway wheel valve.

5 (i) 15mm dia. 23028A1 184.98 Each

5 (ii) 20mm dia. 23031B 201.80 Each

5 (III) 25 MM DIA 23031C 416.47 Each

5 (E) 40mm dia 23031E 656.86 Each

165 A 5 Providing and fixing brass screw down stop 203.79 Each

tap.(A) 15 mm dia 23030A

B 5 20 MM DIA 23030B 221.59 Each

C 5 25 MM DIA 23030C 218.63 Each

166 Providing and fixing chromium plated brass

half trun flush cock of approved quality including

fixing in pipe line etc. complete.

8 (i) 20mm dia. 23032A 252.26 Each

8 (ii) 25mm dia. 23032B 261.16 Each

8 (iii) 32mm dia. 23032C 273.03 Each

167 8 Providing and fixing Urinal or approved 1026.01 Each

quality including conecting the Urinal with

waste pipe , tap etc.complete. (A) White

earthen ware flat back or corner type size

168 8 Providing and fixing Urinal of approved 1535.63 Each

quality including connection with trap

and with integral longitudinal flush pipe. (A)

Squating plate pattern white earthen ware

169 8 Providing and fixing chromium plated, bottle 292.87 Each

trap with necessary couplings of approved

quality for wash basin.

170 8 Providing and fixing ball cock ofapproved 131.57 Each

quality as directed. (A) Copper Metal (i) 25mm

171 5 Providing and fixing ball cock ofapproved 187.96 Each

quality as directed. (A) Copper Metal (i) 50 mm

172 3 Filling with good Quality thor as and where 3850.00 Cmt

directed by the Architect / Engineer-in-

charge, in sunk in layers of 15 cm. thickness,

including watering, ramming well etc. complete,

as directed by the Architect / Engineer-in-

173 40 Providing laying and jointing in true line and level 71.93 Rmt

15 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concelled as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with solvent, including

cost of all materials.adhesive

174 30 Providing laying and jointing in true line and level 90.93 Rmt

25 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX orequivalent

as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concelled as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

175 20 Providing laying and jointing in true line and level 117.97 Rmt

32 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concelled as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

176 5 Providing laying and jointing in true line and level 146.65 Rmt

40 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concelled as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

a 20 Providing laying and jointing in true line and level 193.73 Rmt

50 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/

SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concelled as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

177 2 Providing and fixing premoulded compressible 788.78 Smt

filler board in black colour confirming to MoRT&H

Specifications (Clause 1015), having minimum

density 95kg/cum. non-staining with less than 1%

water absorption & compression recovery of 93%

minimum as per specification for 20 mm wide

expansion joint including cutting to required size

and shape at all levels etc.complete as directed.

178 2 Fixing sun film for protection sunlight in black or 402.54 Smt

any colour as as directd by engineer In

Charge.(Market rate)

179 60 Providing & Fixing 3 mm thick F.R.P.sheet 1930.00 SqM

of Approved Quality & Color / Pattern as per

Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0

size using hollow pipe of16 gauge & size

2"x1" & 1"x1" ,G.I. & Bitumen Washers,

Silicon paste application for fixing the sheet .

Rate also includesnecessary bending, cutting,

labor charges , Zinc Primer coat & Two coats

of oil painting of color as approved by

consultants & making good the wall. (N.S.)

180 5 Providing 2 mm thick F.R.P. Gutter with 400.00 Rmt

necessary M.S. Supporting Brackets. (N.S.)

181 30 Hiring charges for J.C.B.machine inclduing 600.00 Hrs.

cost of fuel, operator, dirver etc.. (

hours sift day/night) (N.S.)

182 3 To provide tractor with hydraulic trolley, driver, 3000.00 No.

4 Nos. of Labor with all tools like bucket drum,

showels, trikam, pavadas, etc,, to

carryout different works during monsoon for

Hrs. Shift. Work shall be carried out as per

the instrucitons of Engineer In-Charge.No extra

charged shall be paid for night shift.

183 2 Roller Blind Providing and fixing Roller Blind 3285.00 Smt

curtain fixed on window level on wooden

batten and curtain lift with cotton thin rope,

make of aerolax or equivalent design

and colour as per instruction by engineer – in

– Charge with necessary hardware fitting,

material and labour etc complete.

184 3 Providing & Fixing Door closer - complete of 474.58 No.

Approved make to wooden / Aluminium Doors as

per direction of engg. In charge.

185 3 Providing and fixiing M.S. Fan clamps type 1 of 124.74 No.

16 mm dia M.S. bar bent to shape with hooked

ends of R.C.C. slabs during laying incl. painting

the exposed protion of loops, all as per standard

design complete.

186 5 Providing cement vata (10cm. x 10 cm. size) 23.45 Rmt

quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete.

187 2 Making Water connection from exi.Muni. Water 250.00 No.

188 4 Applying and providing Expansion joint sealing 4724.75 Smt

System on 100 mm vide joint including cleaning of

exansion joint by mechanical means provision

ofadhesive and flexible membrane with required

bond length as per menufracturer specification

and 4mm thick alluminium strip covering with one

side sloted and bolted with suitable system,

inclusive of all manpower, machinery and material

as per specification and as directed.

189 3 Providing and Fixing 1 H.P. Electrical monoblock 6800.00 Set

or submarcible water pumps withmotor and

required cable and switch board of approved

brand and make etc.comp.as directed.

190 a 100 .Providing TMT Bar FE 415 reinforcement for 66.59 Kg.

R.C.C. work including bending, binding and

placing in position complete up to floor two level

b 850 ProvidingTMTBarFE500/500Dreinforcement for 75.46 Kg.

R.C.C.workincluding bending,binding and placing

in position complete upto floor two level placing in

position complete upto floor two level placing in

position complete upto floor two level(upto 10 ton)

191 5 Providing and fixing 30mm thick solid both side 2214.00 Smt

prelam PVC door shutter (sintex door-equivalent)

with necessary alluminium fitting with EL-7

192 2 Providing & Fixing in position Alluminium window 2350.00 Sq. M.

sliding / fix type with frame using approved

anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium)

units equivalent (a) Frame sections 65 x 25 mm (

at 0.41 kg/mt) (b)Sliding Frame bottom section of

61.85 x 31.75 mm (at 0.41 Kg/Rmt) © Shutter top

& bottom section 40 x18 mm ( wt. 0.41 Kg/Rmt )

(d) Shutter interlock vertical section 10 x 18 mm.(

0.41 Kg/ Rmt) (e) Shutter vertical of 40 x 18 mm.

(0.41 Kg/Rmt) including P/F installing 5 mm thick

approved color Acrylic sheet of standard quality

193 20 Providing and laying polished granite stone slab 2690.00 Smt

18 mm thick in risers of steps, dedo and pllars

laid on 10 mm thick cement mortar 1:3 (1

cement:3 coarse sand) and jointed with gray

cement slurry including rubbing & polishing

194 4 Wall panelling with 12 mm MDF fixed to 1688.00 Smt

existing alluminium framing and making grove

as per design and finished with royal plastic

paint as per instruction of engineer incharge.

195 10 Providing and laying 15mm bamboza 2690.00 Smt

wooden flooring as per architect's drawing

with all necessary details as directed by the

project consultants. Use underlay for

better result as per Detail specifications and

directed by the project consultants. (N.S.)

(Approved Rate )

196 50 Providing 20 mm thick double coat mala cement 269.78 Sq.M.

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including

scaffolding curing etc. complete.

197 500 Finishing wall with weather proof exterior 113.40 Sq.M.

emulsion paint on wall surface (two coats) to give

an required shape evenshade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

198 1 High Back Chairs for vip Lounge 6750.00 Each

:Supplying and installation of “Revolving

High Back” chairs. The chairs must be

robust, ergonomically designed and

comfortable. Seat & Back Assembly -

1.2 cm thick hot pressed plywood and

upholstered with Fabric and Molded

Polyurethane Foam with PVC lining all

around. Back foam is designed with

contoured lumber support for extra comfort.

Chairs Dimension - Width 55 cm, Depth

cm Height 103 – 115.5 cm, Seat Height(SH)

44 – 56.5 cm. The Polyurethane foam should

be molded with density 45+/-2 kg/m3 &

Hardness = 16+/-2 kg/m3onHampden

machine at 25% compression. Arm Rest -

One-piece Black integral skin polyurethane

with 50-70 shore. `D’ Type Handle and

reinforced with MS insert. Centre

Pivot Mechanism - 360o revolving type 17o

maximum tilt on pivot at centre Tilt tension

adjustment. Upright locking. Telescopic

Bellow Assembly - The bellow should be 3 piece

telescopic type and injection molded in black

199 1 Providing and supplying Medium Back Chair 5500.00 Each

for Control room MODEL LIKE HOF

OCT 172 Revolving synchro tilting

mechanism based chair with gas lift for

adjustable height and medium curved back

with seat and back PU molded cushion with MS

pipe frame structure and white foam layer for

seat and molded PU foam. White foam layer

for back covered with thick cloth and

draped with cloth of approved shade. (min.

of Rs.150/meter). 5 legged revolving molded

nylon chair base with good quality of PU castors

with 2 years replacement guarantee. The chair

to have wide polyurethane arm rest of approved

shape. Complete chair should be in suitable

shape. Rates to be inclusive of all taxes

and free delivery at site. The complete item as

per architect /engineer in charge

200 1 Providing and fixing storage, entire unit to be 12500.00 Smt

made from 19 mm th. and 12mm Ply with

1.0mm &. 8 mm th. Laminate. Shelves to be

made from 19mm Ply with both side laminate.

Rate shall include necessary approved

mortise locking systems, S S Handle pair 2"

to 4" height and necessary hardware. Over

all storage to be completed with necessary

hard ware and accessories completed as per

drawing and design as given by Architect.

201 1 Existing storage repairing and veneer on top 7500.00 Smt

Providing and fixing of Louvers On Existing d.c

panel Providing and fixing 35mmthk. Louvers

shutter made up from Ghanateak frame with

135x75mm and shutter frame as per detail and

fixing aluminum louvers which is

specified readymade powder coated

aluminum grill panel louvers .and applying

melamine spray polish all exposed wood work.

Overall door to be completed with necessary

hardware and accessories completed

as per drawing and design as given by

Engineer In charge/Architect.

202A 2 Providing and fixing flush door shutters, 4686.36 Smt

solid core construction with frame of first

class hardwood with cross board and face

veneer or plywood face panels, with both side

1 mm laminate finishing including

anodized aluminum butt hinges with

necessary screws. Decorative type and

pine wood core anodized minimum 3 no

mm long aluminum butt hinges in flush door

shutters with 2 no of brass holdfast 325 mm

long 1 no brass tower bolt 250 mm long and two

no of 150 mm long brass door handle .

Decorative both side laminated Flush door

mm thick. with frame of 10 cm x 7 cmt

Indian teak wood frame including all

necessary fitting fixtures hardware screw

and adhesive etc fixing up to all lead and lift

height up to 45 mtr from GL etc complete as per

direction of engineer in charge

B 2 Providing and fixing 35mm thick factory made 2131.00 Smt

moulded door shuter consisting of solid core

single leaf flush door of 30mm thickness, lipped

with 15mm (5mm x 3) thick x 30mm width on one

stiles and top rail and 10mm (5mm x 2) thick x

30mm width on the other stilesand bottom rails.

The inner panel laminated with 2mm thick termite

proof, water proof and fire resistant moulded PVC

sheet with 2,4,6 raised panel design in different

plain and /or prelim colours on one side after

routing the moulded design on flush door and

2mm plain and/or prelim PVC sheet on other side

using rubber adhesive on flush door and solvent

cement adhesive on the PVC liping etc. complete

as per direction of Engineer in charge,

manufacture’s specification and drawing.

203 50 P/M/F chainlink jali 8'x4' size as per details sketch 1230.00 Rmt

& instructionof engineer in charge same as lal

darwaja garden pattern consisting of 3'dia. M.S

black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C

1:2:4 block of 9"x9"x9" size chain link jali of size

2"x2"x10 gauge fixed in 35x35x5 mm MS angle

frame 8'x4' size with MS flat of size 25x3 mm

welded jali etc.comp.The jali is to be welded to

MS pipe with MS flat as instruction given.The M.S

pipe and the M.S angle frame are to be painted

one coat of primer and two coats of paint as

directed in line and level. (N.S)

204 Providing & Fixing masonary wall with porbandar

lachiya stone with well dressed grooveas per

directed by engg.in charge for foundation, plinth

or super structure level (above plinth level upto

floor two level) in cement mortar 1:5 (1-cement : 5-

fine sand) incl.pointing the joint with white cement

and yellow oxide powder in proportion to match

stone colour the joints should be thread grooved

as per exi. lake stone pitching apperance

1 (A) stone masonary wall/stone dressed single 8990.00 Cmt

faced (size 15"x8"x9")

1 (B) stone coping (size 15"x8"x4") 510.00 Rmt

1 (C) stone coping (size 15"x8"x9") 790.00 Rmt

0 (D) stone column (size 15"x15") 10710.00 Cmt

0 (E) stone column top (size 20"x20"x9") 685.00 No.

205 50 Supplying and fixing of 300 mm-L x 150 mm-B 393.00 Rmt

x 380 mm-H Kerb block for Footpath in M-20

grade using 20 mm nominal size black trap

aggregate of Sevaliya/Timbaor

equivalent quality for pre-cast blocks,

reasonablyexposed finish/ formwork

mould with well equippedwith vibratory

system for kerb stones of approved design

including curing, etc. complete, including

thecost of formwork etc. complete. The rate

shall also include necessary cutting of

asphalt, fixing the Kerbstones in line and level

on 5 cm thick sand bedding

withnecessary equipments and materials. The

rate shall also include the flush pointing in CM

(1:3) for all joints of thekerbstones. Filling of zari

alone the sides of the kerbstone fixed with

Bituminous concrete Bituminousconcrete /

C.C. mixed in proper position to flush withthe

road surface as directed by Engineer in

change to form a portable mixture.a) Laying

on 5 cm thick Sand Bedding

b 100 Providing and fixing pre-cast concrete kerb stone 376.43 Rmt

of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200

grade concret as per approved design and

including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

206 500 Providing and Laying of Rubber Moulded Paver 501.60 Smt

Block Grey/Coloured 60 mm thick, M-35 Grade of

any size shape (Usually Uni-Paver Blocks) using

black trap good quality aggragate of 20 mm

nominal size for footpath,parking areas, service

lanes and other areas as mentioned in the

drawing / instruction of engineer in charge. Cost

includes formworks using rubber mould, Rate

providing and laying paver blocks as per required

grading and specification. The paver block shall

be mechanically compacted. The work of paving

blocks shall be executed in line and level by skill

mason of flooring work only. It should be laid in

such a way that the no cutting of the paver block

to be necessary. if cutting of paver block

necessary then it should be cut by machine only

and carting. The finished surface of the paver

block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of

materials shall not be allowed for production.

Laying on 5 cms thick sand

207 12 Provoding and fixing flush door shutters, solid 1779.97 Smt

core construction with frame of first class hard

wood with cross board and face veneer or ply

wood face panels, including anodised alluminium

butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2)

35 mm thick. Labour work for fixing any kind of

paving with cement pointing in CM 1:2, including

watering, ramming etc comp. as dir.For pavement

208 5 I) Laying on Sand bedding as per requirement to 68.64 Smt

fix the C.C.Block / Nibhada Stone in Line & Level

209 Box type metal letters forming composite box

made from 1mm thick stainless steel plate of

grade 304 having brush finish of following font

size to be fixed at Main Gate in english and or

Gujrati and including fixing charges approved

before fixing by clent / consultant.

A 2 400mm high 1000.00 Nos.

B 2 300 mm high 750.00 Nos.

C 2 230 mm high 565.00 Nos.

210 50 Providing and fixing false ceiling at all height 850.00 Smt

including providing and fixing of frame work made

of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of

gms/sqm (both side inclusive) as per IS :

and consisting of angle cleats of size 25 mm wide

x 1.6 mm thick with flanges of 27 mm and 37mm,

at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of

required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of

26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x

mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with

211 2 Providing and fixing wall acoustical paneling 4160.00 Sq.mt.

using ecotone Slato/ Anutone slato or equivalent

Acoustic Panel make Slats L-16 of size

128mmx2430mmx16mm thick up to 2400mm high

as per the following specification :-Slats L-16-

2mm @16mm, 32 x 128 x 2430 mm high grade

Pine wood base Medium Density Fiber acoustic

boards with Tongue & Groove Edge,2mm slot

perforation @ 16mm centre, slates perforations,

The acoustic should be furnished with a Black

absorbent felt backing with an airflow resistance

of 330- 460 Ns/m³ (DIN 53887),wood practical

core,NRC : should be Up to 0.75,should meet the

safety requirements of EN 14190. Fixing :- Sound

Strut CC18 screw fixed horizontal/vertical to wall

at every 600mm c/c. Metal cleat can be fixed on

top edges of Sound Strut CS55 fixed directly by

stamping to the CS55 and IC91 which is screw

fixed directly to the wall where ever required with

a backing black color fabric as approved by

Architect and as specified including all

accessories, material & labor complete as

directed by Architect / Engineer.

212 2 Providing & Fixing SPEED BUMP - #2 No (1 2185.00 Rmt.

black, 1 yellow) 350 x 500 x 50 mm, Size per

color End Cape 350 MM x 175 MM x 50 MM TOP

DESIGN - Lining Top flat ANTI SKID PATTERN

FOR GRIP COLOUR :- YELLOW & BLACK

BODY MATERIAL :- MODIFIED

THERMOPLASTICS (Polymer Rubberized ) •

ECO FRIENDLY RECYCLE RUBBER Packing :-

4 pcs/ woven Bag Load Capacity :- 20 MT Fitting

( Fixing on TRAKE) :-4 holes & END CAPE :-

HOLE HEX Bolts with Washer Epoxy for Bolt

Fitting etc. complete as directed by EIC .

213 1 Providing & Fixing in position 24 MM exposed grid 2619.00 Sq.mt.

suspension system with “P “ Grid profile false

ceiling system using 600 MM X 600 MM

ecotone/anutone or equivalent make Glass Fiber

Ceiling Tiles having tegular edges & 0.90 NRC

value and approved surface design (with NRC of

0.90) and edge profile Tegular placed in a

suspended grid of size 600 MM X 600 MM made

from hot dipped GI Steel sections, rotary stitched,

main tee of size 24 X 42 X 3000 MM X 0.40 MM

thickness suspended at every 600 MM c/c along

length of ceiling with 4 MM dia, Pre-straightened

G.I.Wire with necessary level adjusters &

intermediate cross tees of size 24 X 38 X 600 MM

X 0.40 MM thickness shall be inserted in to slots

between the main tees at 600 MM centers in

direction vertical to the main tees, where in the

main tees are resting on the periphery on wall

angles of size 24 MM X 24 MM X 3000 MM X

0.40 MM thickness including providing necessary

openings for light fixtures, diffusers etc.

214 5 Providing and fixing of Roller blind 2610.00 Smt

curtain/blackout. The fabric shall be woven from

formulated platisol extruded over a polyaster

yarn.The fabric shouldl be weaved to provide

subtle view of the side of the blind and should

offer elimination of glare and sunlight radiance

upto a minimum of 80%.The fabric shall be flame

215 2 Providing and applying Texture Paint (Rustic 425.00 Sq.m

Finish) on external plastered surfaces, pattern as

per sample approved by the Architect. including

preparing surface, using roller to get approved

texturised surface. Job to include making required

surface preparation, to receive Texture paint

finish etc. All complete as per detail drawing, as

specified and as directed by Architect /

Consultant / Project - In - Charge. The rates shall

be inclusive of Scaffolding, all material, labour

etc. complete. as directed by EIC.

216 4 Providing and fixing PVC/Gpsysum plain colour 766.00 Smt

false ceiling with grid type with aluminium

frame from gypsteel, fastners ,props, Finishing

as per architectural drawing allowing

openings for A.C. Diffusers,

Light/Electrical Points etc –complete, Prior to

fixing on frame.(Brand : Anutone or

equivalent ) (N.S.) or as directd by engineer In

217 5 Provdg. & laying S.W. Gully trap with brick 1279.40 No.

masonry chamber & water tight G.T.Stone

including fixing of covervSquare mouth trap

mm x100 mm size P-Trap

218 10 Providing cement vata (10cmx10cmsize) quarter 23.45 Rmt.

roundin cement mortar 1:1 including neat cement

finishing, waterin getc. complete.

219 2 Providing and laying (to level or slopes) and 211.05 Rmt.

jointing with stiff mixture of Cement Mortar in

proportion 1:1 Salt glazed stoneware pipes

including testing of pipes and joints complete.(A)

220 2 Providing and laying (to level or slopes) and 288.23 Rmt.

jointing with stiff mixture of Cement Mortar in

proportion 1:1 Salt glazed stoneware pipes

including testing of pipes and joints complete.(B)

221 2 Constructing brick masonry chamber for 2903.89 Each

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

222 3 Constructing brick masonry chamber for 3624.51 Each

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(i)Inside dimensions 500mm x 700 mm

and 450mm deep for pipe line

with one or two inlets.

222A 3 Constructing brick masonry chamber for 7109.35 Each

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more

223 55 Providing, supplying and fixing precast C.C. 219.00 Rmt.

blocks (M-20) edge kerb having size of 75 x

x 300 mm depth and as per design conveying it to

the site, jointing into C:M 1:3 and racking out the

joints incl. necessary excavation of asphalt, soil

etc..completed.

224a 3 Constructing a cooking Sandwich platform 60 cm. 933.98 Rmt.

width and 70 cm high resting on B.B.Masonry

walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black

Granitee 30mm thick laid on precast R.C.C.

(1:2:4) slab with plastering on exposed faces of

wall in C.M. (1:4) etc complete.

224b 3 Constructing a cooking platform 60 cm. width and 1132.43 Rmt

70 cm high resting on B.B.Masonry walls

cm.thick in C.M.(1:6) with (ii) Fixing black

kadappa stone 30mm thick laid on precast R.C.C.

(1:2:4)slab with plastering on exposed faces of

wall in C.M. (1:4) etc complete.

225 10 Providing and fixing hard drawn steel wire fabric 754.65 Smt

75mm x 25mm mesh or weight not less than

kg. per Sq.M. to window frames etc. including60 x

20mm beading of teak wood.

226 24 Providing & fixing 15 cm wide chicken mesh jali 35.00 Rmt.

with nails & then application of 15 mm plaster on

R.C.C.& masonary joints as per dir.of engg.in

227 20 Providing and laying cement concrete flooring 348.08 Smt.

1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement.

(A) 50mm thick.

228 5000 Providing and constructing, Underground (U/G) 6.50 Litre

water tank of specified capacity, on specified

location, for all depths, in controlled CC of M-200

grade with bottom slab, top slab and RCC walls,

including cost of form work and

reinforcement,with inside and outside plaster in

CM 1 :3 and water proofing treatment as per IWP

specification,including injection, grouting, etc.

complete. The rate includes for providing and

fixing two nos. 0.6m. x 0.6 m. size medium duty CI

manhole cover/s at top, including wash out pipe

line and inlet and outlet connections etc. complete.

229 5 Providing & Fixing of Armstrong Mineral Fibre 1307.00 Smt

Acoustical Suspended Ceiling System with Dune

(Bevelled Tegular) Edge Tiles With Armstrong

15mm Exposed GRID. The tiles should have

Humidity Resistance (RH) of 99%, NRC 0.5, Light

Reflectance ≥85%, Thermal Conductivity k =

0.052 - 0.057 w/m K, Colour White, Fire

Performance UK Class 0 / Class 1 (BS 476 pt -

&7) in module size of 600 x 600 x 15mm , suitable

for Green Building application, with Recycled

content of 32%. The tile shall be laid on

Armstrong Silhouette profile grid system with

15mm white flanges incorporating a 6mm central

reveal in white/black colour and with a web height

of 45mm and a load carrying capacity of minimum

15.68 Kgs/M2 & minimum pull out strength of

Kgs.. Silhouette, Main Runners & Cross Tees to

have mitred ends & “birdsmouth” notches to

provide mitred cruciform junctions. The T

Sections have a Galvanizing of 90 grams per M2

and need to be installed with Suspension system

of Armstrong make. Warranty Certificate and Test

Reports for NRC, CAC and Fire rating shall be

provided by Vendor.

Mineral Fibre Acoustic Modular Ceiling Tile

should be GREENPRO certified and qualifies as

GREEN PRODUCT certified by CII Green

Products and Services Council.INSTALLATION:

To comprise main runner spaced at 1200mm

centres securely fixed to the structural soffit using

Armstrong suspension system (specifications

below) at 1200mm maximum centre. The

First/Last Armstrong suspension system at the

end of each main runner should not be greater

than 450mm from the adjacent wall. Flush fitting

1200mm long cross tees to be interlocked

between main runners at 600mm centre to form

1200 x 600 mm module. Cut cross tees longer

than 600mm require independent support. 600 x

600mm module to be formed by fitting 600mm

long flush fitting cross tees centrally between the

1200 mm cross tees.Perimeter trim to be

Armstrong wall angles of size 3000x19x19mm,

secured to walls at 450 mm maximum centres.

Installation should be carried out as per

Armstrong recommended

procedure.ARMSTRONG SUSPENSION

SYSTEM accessories manufactured and supplied

by Armstrong World Industries consisting of M6

Anchor Fasteners with Vertical Hangers made of

Galvanised steel of size 26 x 26 x 25 x 1.2mm

with a Galvanised Thickness of 80gsm, A pre

230 20 Providing and fixing PVC Printed pain colour false 766.00 Smt

ceiling with grid type with alluminium frame

consisting of 600mm x 600mm 3mm thick plain

PVC sheet used as panel insert in a frame work

made using anodized alluminium T section of size

1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in

square pattern of grid sizes of 2 x 2 (600 x

600mm) The alluminium frame work is supported

from the cceiling with the help of G.I. hook and

G.I. wire/6mm M.S. rods of required sizes to

maintain proper level etc. The aluminium frame

work is supported on side wall with the use of

alluminium L section of size 1 x1 (25 x 25mm)

angles etc. complete as per direction of Engineer

in charge. Manufactures specification and

231 30 Providing and supplying of labour for necessary 551.00 No

manual excavation, cleaning, Shifting of Material

Or any other, or for any other work as directed by

Engineer In charge. The Rate includes Handcart

A 10 Carpenter L007 725.00 No

B 5 Fitter/Plumber/Mason L025 697.00 No

C 5 WELDER/ Gas cutter at Day /night L030 689.00 No

D 5 Supplting of welding machine / gas cutter 1500.00 No

including cost of welding rods/gas,

Transportation, including carting from site to work

E 30 Mazdoor at Day Male/Female 493.00 No's

232 500 Conveyance charges of (A) limemurrumbuilding 326.73 Cmt

rubbish earth manure or sludge & execavated

rock andrubbish [Limemurrum building rubbish

233 15 Supplying electric breaker machine for RCC slab 1071.42 Shift

or asphalt demolishing work on site by using

operator, fuel, power supply etc.complete as

directed. (no payment should be allowed for non

working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break

down work) (Based on Previously approved rate

234 10 CatchPit Jali Fixing P/F FRC catch pit jali with 1383.92 No.

frame 600mm x 600mm clear opening etc. comp.

As directed by engineer in charge. (Based on

Central Store Rate)

235 Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the

wall, ceiling and floor etc. complete.

A 5 15 MM DIA 23055 165.21 Rmt

B 5 20 MM DIA 23056 202.97 Rmt

C 5 25 MM DIA 23057 247.25 Rmt

D 2 32 MM DIA 23058 330.36 Rmt

E 2 40 MM DIA 23059 437.66 Rmt

F 1 50 MM DIA 23059 647.30 Rmt

236 1 Providing and fixing cast iron steps of size 162.23 Each

500mm x 150mm x 22.5mm and painting with two

coats of Anti-corrosive paint etc. complete.

237 5 Supplying and fixing C.I. cover 300mm x 300mm 491.80 Each

without frame for Gulley trap (Standard pattern) te

weight of cover to be not less 4.53 Kg.)

238 Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene

pipes of the following out side Dia. Low

densidy, complete with special falnge

compression type fittings, wall clips etc.

including making good the wall ceiling and floor.

239 10 Providing and fixing sheet glass, selected quality 1176.10 Smt

(Type-C) bedded in putty and fixed with wooden

beading including the cost of wooden beadings of

first class teakwood and necessary cutting of

glass. (2) 6 mm thick.

240 10 Providing and fixing rough cast wired glass, 6mm 559.26 Smt

thick bedded in putty and fixed with wooden

beading including the cost of wooden beadings of

Indian teak wood and necessary cutting of glass.

(C) Wired - figured glass

241 40 Providing and fixing five courses water profing 466.84 Smt

treatment with bitumen felt consisting of second

and fourth course of blown / bitumen or/ and

residual bitumen applied hot at 1.2 kg.per Sq.M.of

area for each course and first course with fibre

base bitunen saturated under lay type land third

course with fibre base self finished felt type

grade 1 and fifth and final course of stone grit

6mm and down size or pea sizes gravel spread at

0.008 Cu. Metre / Sq. metre including preparation

of surface excluding grading complete.

242 5 Providing and fixing three courses water profing 753.20 Smt

treatment of Astral Make Company. with an first

layer of first course with fibre base, Second

Course of Water Proofing chemical coat, and

Third Coat of Fibre Coat with fibre base self

finished felt type 2 grade 1 and final course of

Burshing with chemical Treatment with a

thickness of 1 to 2 mm thickness, including

preparation of surface , The Said work should be

provided for a perfomance bond of 5 Years for

warranty purpose.

243 2 Constructing Manhole with R.C.C. top slab in 10920.76 Each

1:2:4 mix (1-cement :2-coarse sand : 4-graded

stone aggregate 20mm nominal size) foundation

concrete1:3:6 mix (1-cement : 3- coarse sand :6-

Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-

coarse sand) finished with a floating coat of neat

cement and making channels in cement concrete

1:2:4 mix (1- Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished smooth

complete including curing and festing (i) Inside

size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick msonry

using brick having crushing strength not less than

35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement:

5-Coarse sand) (1) A type depth 0.90 Metre for

150mm diameter sewer.

244 10 Providing and fixing of wall paper at Wall/Ceiling/ 140.00 Sq.Ft

or at other places, as required. ( Basic Rate of

Wall paper must be (100-120) Rs. Per Sq.Ft. The

Rate includes of necessary material, with fixing

and transporation with necessary solution.

245 2 Providing and fixing of Shower of jaquar make for 3802.00 No's

Serial No. 0797N ALD ( High Flow C/Body-

Jaquar, Primary Batch )

246 2 Providing and fixing of Metro Pole of 40 mm dia of 4062.00 No's

Jaquar Make of series FLV-1093 N ( Serial No.

247 1 Providing and fixing of chair bracket for Support 2225.00 No's

of W.C. of Primary batch Series-7324 of Jaquar

248 1 Providing and fixing of upper part of W/C of 2378.00 No's

jaquar series of

249 2 Providing and fixing of 2 in 1 Bib cock of jaquar 2889.00 No's

Series of KUP-35041 (8481) as per Instructions

of engineer in charge.

250 1 Providing and fixing of Pillar cock of jaquar make 4043.00 No's

series EXTND 190 MM as per instructions of

engineer in charge.

251 1 Providing and fixing of Angle cock of jaquar make 1870.00 No's

series of KUP-35053 PM

252 1 Providing and fixing of shower of size 8x8m 7851.00 No's

including shower arm, flange, floor trape,

including all material with fixing as per Instructions

of engineer in charge.

253 5 Supplying and fixing of Roller blind curtain In 6670.00 Smt

Patterned Fabric of Different Textures corded in

roller blinds with stiching fittings and of stichles

pattern. The Price Rate Includes necessary

Making with fixing of roller blind with roller

mechanism as instruction and selection of design

as per engineer in charge.

254 8 Supplying and fixing of Sheer Curtains of 1955.00 Smt

Different Size, In Patterned Fabric of White

Colour Textures stiching fittings and of stichless

pattern. The Price Rate Includes necessary

Making with fixing of Sheer Curtain with top

channels of fixing as instruction of engineer in

255 8 Supplying and providing of Green Curtain for 1162.00 Smt

prevention of Sunlight. The Price Rate Includes

blackout curtains with dense or fabirc or foam

interlining material. The Price Rate also Includes

necessary fixing with roller tie ropes at site at any

height as per instruction of engineer in charge.

256 0 Demolition of Existing Platform and Construction 260130.00 Jobwork

of New Modular kitchen with necessary drawer

Arrangement, Providing and fixing of chimney,

and Providing of Self for Placing of utensils, with

tandom channels, Laminates in hard board

material. The Rate also includes construction of

Platform in Granite work, including kitchen sink

and with necessary Plumbing work, as per

Instructions of engineer in charge. The Rate

includes with necessary materials of hardware,

manpower, necessary machinery for platform

work and other civil works upto any lead and lift

as directed. The Rate also includes carting of

materials for to and fro at the site.

257 50 Supply & fixing factory finished cold formed Light 113.31 Kg.

guage steel frame sections confirming to SP:6 (5)

1980 at site or work including riveted, bolted or

welded in builtup for all type of sections ,in framed

work, cutting, hoisting, fixing in position and

applying primer coat of approved steel primer etc.

complete as per structural designs & directions of

Engineer-in-charge.

258 100 Providing valleys 900mm overall in plain 1.6mm 1042.78 Smt

thick G.I. sheet fixed with G.I. J or L Hooks, Bolts

and nuts glavanised iron J or L Hooks Bolts and

nuts 8mm dia G.I. Limpet and bitumen washers

259 10 Providing laying (to level or slopes) and jointing 658.89 Rmt

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar

joints including testing of joints complete.(D)

260 1 Constructing Manhole with R.C.C. top slab in 19139.07 Each

1:2:4 mix (1-cement :2-coarse sand : 4-graded

stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-

Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-

coarse sand) finished with a floating coat of neat

cement and making channels in cement concrete

1:2:4 mix (1- Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished smooth

complete including curing and festing (i) Inside

size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than

kgs. (Wt. of cover 64 Kg. and Wt. of frame

Kg.)(A) With 230mm thick walls of brick msonry

using brick having crushing strength not less than

35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement:

5-Coarse sand) (2) B type depth 1.50 Metre for

150mm diameter sewer.

261 5 Providing laying (to level or slopes) and jointing 658.89 Rmt

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar

joints including testing of joints complete.(D)