Construction of 02Nos 2x5MVA Substation (PakhiDistrict Chamoli and Sara District-Dehradun) along with its associated 33KV Lines

Total BoQ2 Supply price ( SARA)

Total BoQ3 Erection price ( SARA)

Total BoQ4 Supply price (PAKHI)

Total BoQ5 Erection price (PAKHI)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. Quoted rate for similar items must be same in each schedule. If any variation, then lowest rate of that item shall be considered for evaluation and award of Work. 2. All materials shall be as per technical specification uploaded with other tender documents. PRICE SCHEDULE: Plant and Equipment to be supplied. (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

New Substation 2x5 MVA

33 KV SUB STATION MATERIAL

T/F 33/11kV 5MVA

8 m. LONG STP 410 SP-10 (BPHD GAL.)

8.5 MRT. LONG STP 410 SP-23(BPHD GAL.)

11 MTR. LONGSTP 410 SP-55(BPHD GAL.)

STP 13.0 M-IS 410 SP-72 (BPHD GAL.)

MS ROUND 32 mm

11 kV POLYMER DISC INSULATOR (B&S) TYPE

DISC FIT. B&S TYPE WEASEL/RABBIT 45 KN

9 KV 10 KA Polymeric Lightning Arrestor

EARTHING ROD MS 20X2500mm

GI WIRE 5mm/6 SWG

STAY SET GI 16X1800mm

STAY SET GI 20X1800mm

STAY WIRE GI 7/3.15mm 7/10SWG

STAY WIRE GI 7/4.0 mm 7/8 SWG

ACSR WEASEL

ACSR PANTHER

CABLE AL 3X185 SQ. mm XLPE 11 kV

CABLE AL 3X240 SQ. mm XLPE 11 kV

CABLE AL 3X50 SQ. mm XLPE 33kV

CABLE AL 3X400 SQ. mm XLPE 33 kV

J/KIT FOR 3X240mm² 11kV XLPE CABLE (I/D)

J/KIT FOR 3X185mm² 11kV XLPE CABLE (O/D)

J/KIT FOR 3X240mm² 11kV XLPE CABLE (O/D)

J/KIT FOR 3X400mm² 33kV XLPE CABLE (I/D)

J/KIT FOR 3X400mm²33kV XLPE CABLE (O/D)

J/KIT FOR 3X18511kV XLPE CABLE (I/D)

CONTROL CABLE 10X2.5 SQ. mm.

CONTROL CABLE 2X2.5 SQ. mm.

CONTROL CABLE 4X2.5 SQ. mm.

LT PVC CABLE 2X6 SQ.mm (UN- ARMORED)

LT PVC CABLE 4X10 SQ.mm

11kV VCB I/C 350 MVA, 600/300/5A,110V AC

11kV VCB FD 350/500MVA,400/200/5A,110VAC

11 kV VCB B/C 350 /500MVA

33kV, 1250A- 3P INDOOR VCB.(SCADA) I/C

33kV, 1250A- 3P INDOOR VCB .(SCADA) O/G

33kV, 1250A-3P I/D VCB(SCADA)BUS COUPLER

33kV,1250A-3P I/D VCB(SCADA) PT PANEL

33 kV LIGHTNING ARRESTER

33 kV FUSE SET

11 kV GANG OPERATING SWITCH

33 kV LINE ISOLATOR 400/800A

33 kV BUS ISOLATOR 400/800A

33/0.433 KV 25 KVA T/F

MS PLATE 225X225X8MM

MS STRUCTURE (ANGLE ,CHANNEL ETC.)

Cable Holding clamp with N&B

Bracing Clamp SP-72

PP & CLAMP WITH N&B ST POLE SP-55

STAY CLAMP FOR SP-23 WITH NUT & BOLT

33KV ISOLATOR CONN.CLAMP FOR PANTHER,N&B

PP & CLAMP WITH N&B ST POLE SP-72

STAY CLAMP FOR SP-72 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-23

PERFORATED TRAY 400MM FOR CABLE TRENCH

PERFORATED TRAY 200MM FOR CABLE TRENCH

PERFORATED TRAY 100MM FOR CABLE TRENCH

GI PIPE 6 METER LONG

BRACING CLAMP TOP FOR SP-23 WITH N/B

DANGER BOARD With Clamp N&B

GI Pipe 4'" Dia

Insulated Electrical Pliers Taparia

11 KV Fuse Set

Cable Holding Clamp with N&B of Size

KM-21 G.I. Pipe 6'' dia 3 meter long

Conne.Suitable for Panther for LA

LED Street Light 50 Watt

Connector of Power T/F LV Side

CHEMICAL EARTHING

GI STRIP 65MMX6MM

“HT” WARNING TAPE

Connectors For FUSE SUITABLE FOR PANTHER

Connector for Flex Cu. Conn lug 500x50mm

CONNECTOR FOR T/F SUITABLE FOR PANTHER

CONNECTOR FOR T/F SUITABLE FOR DOG/WEASE

Insulators for holding earthing strip

Connector for Isolator for Dog/Weasel

33kV XLPE HS CABLE J/K 3X50 mm SQ O/D

CABLE AL 4X25 SQ. mm PVC

Iron Clad 30 Amp Switch

DCDB 24V

33 KV 630 Amp 3 Way RMU

24 V BATTERY SET

24V BATTERY CHARGER

Wire Mesh Fencing

Name Plate of Equip. TG,LI,BI,CT,CB ect.

SUNDRISE ITEM LUG GLANDE ETC

GI Strip 40x6 mm

Stone Pad 300x300x75mm

Dustbin 20 Litre Capacity (Colour Green)

Torch 3 Cell

33 KV Hand Gloves

Earth Chain

Rubber Mat (12mm) 2M X1M X12mm

First aid box

SHOCK TREATMENT CHART

SHUT DOWN/ BREAK DOWN BOARD

WALL CLOCK

D-SPANNER SET

PIPE WRENCH 12''

2.5 KV MEGGAR DIGITAL

EARTH MEGGAR DIGITAL

INSTRUCTION BOARD

MAXIMUM & MINIMUM DISPLAY BOARD

SUB STATION NAMED BOARD

Portable Foam Type Fire Extinguisher 5LT

90 WATT LED LIGHT WITH ACC.

STAND OF CHUGGI TYPE INCLUDING PAINT

Single Line Diagram Board

Door Mat

Name plate of feeder

Name plate of station t/f

11KV Danger Board with Clamp

33 KV Danger Board with Clamp

Fire Extinguisher ABC Type 5kg

Steel Almirah

Office Table size (4x2.5)

Fire Bucket Stand with Buckets

Steel Cabinet

Steel office Table

Steel office chair Godrej

Meggar 5 KV Digital

33 KV LINE MATERIAL

11 MTR. LONGSTP 410 SP-55(BPHD GAL.)

STP 13.0 M-IS 410 SP-72 (BPHD GAL.)

MS ANGLE 65X65X6 mm

MS CHANNEL 100X50 mm

MS CHANNEL 125X65 mm

33kV 10KN POLYMER PIN INSULATOR WITH PIN

DISC FIT. B&S TYPE DOG/RACOON 70 KN

X ARM ANGLE 65X65X6 mm V TYPE 11 kV

X ARM CHANNEL 100X50 mm V TYPE 33 kV

EARTH WIRE GI 7/1.6mm 16 SWG

EARTHING ROD MS 20X2500mm

GI WIRE 5mm/6 SWG

STAY SET GI 20X1800mm

STAY WIRE GI 7/4.0 mm 7/8 SWG

ACSR DOG

CABLE AL 3X400 SQ. mm XLPE 33 kV

J/KIT FOR 3X400mm² 33kV XLPE CABLE (I/D)

J/KIT FOR 3X400mm²33kV XLPE CABLE (O/D)

33 KV Straight Through J/K 3x400

MS NUT & BOLT OFF SIZE

Bolt & Nuts 50x16 mm

Bracing Clamp SP-72

E- CLAMP

Earth wire clamp 33 KV for SP-72-N&B

EARTH WIRE CLAMP FOR SP-55 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-55

PP & CLAMP WITH N&B ST POLE SP-72

STAY CLAMP FOR SP-72 WITH N/B

NUMBER PLATE WITH CLAMP

Danger Board With Clamp N&B

Cable Holding Clamp with N&B of Size

KM-21 G.I. Pipe 6'' dia 3 meter long

Concrete route marker for HT cable

BOLT & NUT OF SIZE 200X12 MM

PP & CLAMP WITH NUT & BOLT FOR GUARDING

33 KV Disc insulator polymer, 70KN B&S

ALUMINIUM BINDING WIRE

BARBED WIRE

Stone Pad 300x300x75mm

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. All materials shall be as per technical specification . PRICE SCHEDULE : Installation/Erection charges including Testing and commissioning (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

New Substation 2x5 MVA

33 KV SUB STATION ERRECTION WORK

7.2.1 (DSR CODE 2014)

NSI_EARTH FILLING

CEMENT CONCRETING WORK IN RATIO 1:4:8

BRICK WORK IN 1:4 RATIO

CEMENT PLASTER WORK

FENCING OF YARD

Making cable trench.including fabrication, fixing of MS angle 50/40X6 mm size (excluding cost of MS angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.75 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal etc.

SUPPLY&ERRECT GRAVEL PITCHING 1/2"- 3/4"

ELECTRICAL INSPECTION FEE

CHEMICAL EARTHING

ERECTION OF EARTHING ROD

ERECTION OF 11 KV STAY SET

ERECTION OF SINGLE SP-10 POLE

ERECTION OF SP-23 DOUBLE POLE

ERECTION OF SP-55 DOUBLE POLE

ERECTION OF SP-72 DOUBLE POLE

PAINTING OF SP-10 POLE

LAYING OF U/G 11 KV CABLE IN TRENCH

LAYING OF U/G 33 KV CABLE IN TRENCH

FIXING OF TPMO

LAYING OF WEASEL CONDUCTOR IN HT LINE

LAYING OF PANTHER CONDUCTOR IN HT LINE

FIXING OF 11 KV XLPE JOINTING KIT

FIXING OF 33 KV XLPE JOINTING KIT

ERECTION OF POWER T/F(5 MVA)

ESCAVATION OF EARTH FOR STRUCT. ERECTION

GROUTING OF STRUCTURE IN CC 1:3:6

ERECTION 11 KV VCB(O/G-B/C-I/C)PANEL

ERECTION OF 33 KV VCB

EXCAV. ERECT. OF STAY SET COMP. WORK

LAYING OF (2.5*4) CONTROL CABLE

FIXING OF GI PIPE (WITH SOCKET)

ERECTION OF LINE ISOLATOR STRUCTURE

COMPLETE TESTING WIRING

MAKING LOOP OF 33 KV XLPE CABLE

FABRICATION OF STRUCTURE

ERECTION OF BUS ISOLATOR STRUCTURE

ERECTION & LAYING OF LT XLPE CABLE 2X6

PAINTING OF DOUBLE POLE (SP-23)

PAINTING OF DOUBLE POLE (SP-55)

PAINTING OF DOUBLE POLE (SP-72)

INSTALLATION OF DCDB INCLUDING TESTING

INSTALLATION OF ACDB INCLUDING TESTING

ERECTION OF 33/0.433KV S/S TRANSFORMER

ERECTION OF FLEXIBLE CU. CONN. 500X50 MM

ERECTION OF 24 VOLT BATTERY SET

ERECTION OF CONTROL CABLE 10CX2.5 SQMM

ERECTION OF 32 MM ROUND

INSTALLATION IRON CLAD 30 AMP SWITCH

ERECTION & LAYING OF 33KV CABLE 3X50SQMM

FIXING OF 33 KV O/D CABLE J/KIT 3X50SQMM

ERECTION OF 65X6 MM GI STRIP

FIXING OF G.I PIPE 3 MTR LONG

ERECTION OF NAME PLATE OF FEEDER

ERECTION OF NAME PLATE OF SATION T/F

ERECTION OF 11KV DANGER BOARD WITH CLAMP

ERECTION OF 33KV DANGER BOARD WITH CLAMP

ERECTION OF 40X6MM GI STRIP

ERECTION OF MS PLATE 225 X225X8 MM

ERECTION OF LT CABLE 4X25 SQ MM

ERECTION OF CONTROL CABLE 2X2.5 SQ MM

FIXING OF CONNECTOR FOR LA SUITABLE FOR

FIXING OF CONNECTOR ISOLATOR FOR PANTHER

FIXING OF CONNECTOR FOR FUSE FOR PANTHER

FIXING OF CONNECTOR FOR T/F FOR PANTHER

FIXING OF CONNECTOR FOR T/F FOR LT SIDE

FIXING OF CONNECTOR STATION T/F FOR DOG

ERECTION OF G.I. WIRE 6 SWG

FIXING OF CABLE HOLDING CLAMP

FIXING OF INS FOR HOLDING EARTHING STRIP

FIXING OF 11 KV FUSE SET

FIXING OF 33 KV FUSE SET

FIXING OF GI PIPE 6 MTR FOR VERTICAL BUS

FIXING OF 11 KV LIGHTNING ARRESTOR

FIXING OF 33 KV LIGHTNING ARRESTOR

LAYING OF 4X10SQ MM LT PVC CABLE

FIXING OF CONNECTOR FOR ISOLATOR FOR D/W

FIXING OF CABLE HOLDING CLAMP N&B OFF SZ

FIXING OF 33 KV 630 AMP 3 WAY RMU

PAINTING OF WIREMESH FENCING

ERECTION OF HT CABLE WARNING TAPE

ERECTION OF 24 VOLT BATTERY CHARGER

FIXING OF 90W LED LAMP

FIXING OF 50 W LED LAMP

ERECTION OF T&P ITEMS

ERECTION OF MISC. ITEMS

PAINTING OF ISOLATOR/LA/CT/ STRUCTURE

33 KV LINE ERRECTION WORK

7.2.1 (DSR CODE 2014)

CEMENT CONCRETING WORK IN RATIO 1:4:8

ERECTION OF EARTHING ROD

FIXING OF RCC CABLE ROUTE MARKER

ERECTION OF SINGLE SP-72 POLE

ERECTION OF SP-55 DOUBLE POLE

ERECTION OF SP-72 DOUBLE POLE

ERECTION OF SP-72(11KV/33 KV) FOUR POLE

LAYING OF U/G 33 KV CABLE IN TRENCH

LAYING OF U/G 33 KV CABLE(TRECNCHLESS)

LAYING OF DOG CONDUCTOR IN HT LINE

GUARDING OF 33 KV LINE

LOPPING & CHOPPINGOF TREE BRANCHES

FIXING OF 33 KV XLPE JOINTING KIT

HEADLOAD CARTAGE OF MATERIAL(0-1 KM)

ESCAVATION OF EARTH FOR STRUCT. ERECTION

ROAD CUTTING AND REPAIRING

SUPPLY AND LAYING OF HDPE PIPE

SPREADING,STRINGING,SAGGING EARTH WIRE

EXCAV. ERECT. OF STAY SET COMP. WORK

COMPLETE TESTING WIRING

MAKING LOOP OF 33 KV XLPE CABLE

MANUAL DIGGING OF CABLE TRENCH UPTO 1 MT

SUPPLY & LAYING OF HDPE PIPE IN OPEN CUT

FABRICATION OF STRUCTURE

PAINTING OF SINGLE POLE (SP-72)

PAINTING OF DOUBLE POLE (SP-55)

PAINTING OF DOUBLE POLE (SP-72)

PAINTING OF FOUR POLE (SP-72)

FIXING OF G.I PIPE 3 MTR LONG

SHIFTING REALIGNMENT 11KV SP,DP/ LT LINE

DELTA EARTHING WITH MS ROUND ELECTROD/GI

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. Quoted rate for similar items must be same in each schedule. If any variation, then lowest rate of that item shall be considered for evaluation and award of Work. 2. All materials shall be as per technical specification uploaded with other tender documents. PRICE SCHEDULE: Plant and Equipment to be supplied. (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

New Substation 2x5 MVA

33 KV SUB STATION MATERIAL

T/F 33/11kV 5MVA

8 m. LONG STP 410 SP-10 (BPHD GAL.)

8.5 MRT. LONG STP 410 SP-23(BPHD GAL.)

11 MTR. LONGSTP 410 SP-55(BPHD GAL.)

MS ANGLE 50X50X6 mm

MS ANGLE 65X65X6 mm

MS ANGLE 75X75X6 mm

MS ANGLE 75X75X8 mm

MS CHANNEL 100X50 mm

MS CHANNEL 125X65 mm

MS ROUND 32 mm

DISC INSULATOR B&S 120 KN

11 kV POLYMER DISC INSULATOR (B&S) TYPE

33 kV POLYMER DISC INSULATOR (B&S) TYPE

DISC FIT. B&S TYPE DOG/RACOON 70 KN

DISC FIT. B&S TYPE WEASEL/RABBIT 45 KN

EARTHING ROD MS 20X2500mm

GI WIRE 5mm/6 SWG

STAY SET GI 16X1800mm

STAY WIRE GI 7/3.15mm 7/10SWG

ACSR PANTHER

CABLE AL 3X185 SQ. mm XLPE 11 kV

CABLE AL 3X240 SQ. mm XLPE 11 kV

CABLE AL 3X50 SQ. mm XLPE 33kV

CABLE AL 3X300 SQ. mm XLPE 33 kV

CABLE AL 3X400 SQ. mm XLPE 33 kV

J/KIT FOR 3X240mm² 11kV XLPE CABLE (I/D)

J/KIT FOR 3X185mm² 11kV XLPE CABLE (O/D)

J/KIT FOR 3X240mm² 11kV XLPE CABLE (O/D)

J/KIT FOR 3X300mm² 33kV XLPE CABLE (I/D)

J/KIT FOR 3X400mm² 33kV XLPE CABLE (I/D)

J/KIT FOR 3X300mm² 33kV XLPE CABLE(O/D)

J/KIT FOR 3X400mm²33kV XLPE CABLE (O/D)

J/KIT FOR 3X18511kV XLPE CABLE (I/D)

CONTROL CABLE 10X2.5 SQ. mm.

CONTROL CABLE 2X2.5 SQ. mm.

CONTROL CABLE 4X2.5 SQ. mm.

LT PVC CABLE 2X6 SQ.mm (UN- ARMORED)

LT XLPE CABLE 4X 25 SQ. mm.

LT PVC CABLE 4X10 SQ.mm

11kV VCB FD 350/500MVA,400/200/5A,110VAC

11 kV VCB B/C 350 /500MVA

11kV VCB I/C 500 MVA, 800/400/5A,110V AC

33 kV VCB, 1250A, 24V

CONTROL PANEL INC 33kV DOUBLE T/F

CONTROL PANEL FDR 33 kV SINGLE CKT

33 KV CT 200/100/1-1-1A

33 kV CT 400/200/1A-3C

JUNCTION BOX FOR 33kV CT

JUNCTION BOX FOR 33kV PT

33kV PT of RATIO 33 kV/110V OUTDOOR

POST INSULATOR 33 kV

9 kV 10KA LIGHTNING ARRESTER

33 kV LIGHTNING ARRESTER

33 kV FUSE SET

11 kV GANG OPERATING SWITCH

33 kV LINE ISOLATOR 400/800A

33 kV BUS ISOLATOR 400/800A

33/0.433 KV 25 KVA T/F

RAIL 90 LBS

MS ANGLE 40X40X5 mm

MS NUT & BOLT OFF SIZE

MS PLATE 225X225X8MM

R.S. JOIST 175X85mm

Cable Holding clamp with N&B

PG CLAMP ALU ALLOY PANTHER TO DOG

PP & CLAMP WITH N&B ST POLE SP-55

STAY CLAMP FOR SP-23 WITH NUT & BOLT

33KV ISOLATOR CONN.CLAMP FOR PANTHER,N&B

PG CLAMP ALU ALLOY PANTHER TO PANTHER

PP & CLAMP WITH N&B ST POLE SP-23

GAURD INSULATOR

PERFORATED TRAY 400MM FOR CABLE TRENCH

PERFORATED TRAY 100MM FOR CABLE TRENCH

GI PIPE 6 METER LONG

Danger Board SP-23 With Clamp N&B

DANGER BOARD

GI Pipe 4'" Dia

MS Flat50x6mm 0.3x10x2x2x2 for CT Struc.

Insulated Electrical Piller Taparia

11 KV Fuse Set

Bolt & Nuts off Size

GI Pipe Dia 150 mm

Perforated Tray 300mm for Cable trench

Conne.Suitable for Panther for LA

LED Street Light 50 Watt

BRACING CLAMP FOR ST POLE WITH N&B

Connector of Power T/F LV Side

Danger board with Clamp (SP-55)

“HT” WARNING TAPE

Connector for Flex Cu. Conn lug 500x50mm

CONNECTOR FOR T/F SUITABLE FOR PANTHER

CONNECTOR FOR T/F SUITABLE FOR DOG/WEASE

Disc fitting for Panther 120 KN

33kV XLPE HS CABLE J/K 3X50 mm SQ O/D

LT PVC Cable 2x6 sq mm-D

LT PVC Cable 4x10 sq mm-D

Iron Clad 30 Amp Switch

DCDB 24V

Connector Suit for CT/PT for Panther/Dog

24 V BATTERY SET

24V BATTERY CHARGER

Wire Mesh Fencing

M.S.PLATE 400X400X8 mm

Name Plate of Equip. TG,LI,BI,CT,CB ect.

MS Bar 12mm Dia for Steel Reinforcement

G.I EARTH STRIP 65X6MM

SUNDRISE ITEM LUG GLADE ETC

Fab. 2 mtr long1.8mtr highwire mesh gate

GI Strip 40x6 mm

Stone Pad 300x300x75mm

Connector Suitable. Panther for VCB

Dustbin 20 Litre Capacity (Colour Green)

RUBBER MAT(INSULATED )1MX1MX3MM

Torch 3 Cell

33 KV Hand Gloves

Earth Chain

First aid box

SHOCK TREATMENT CHART

SHUT DOWN/ BREAK DOWN BOARD

WALL CLOCK

D-SPANNER SET

PIPE WRENCH 12''

2.5 KV MEGGAR DIGITAL

EARTH MEGGAR DIGITAL

INSTRUCTION BOARD

MAXIMUM & MINIMUM DISPLAY BOARD

SUB STATION NAMED BOARD

90 WATT LED LIGHT WITH ACC.

STAND OF CHUGGI TYPE INCLUDING PAINT

Door Mat

Single line diagram of S/S

Isolation Transformer 3 phase 15 A 415 V

Fire Extinguisher ABC Type 5kg

Steel Almirah

Office Table size (4x2.5)

Fire Bucket Stand with Buckets

Steel Cabinet

Steel office Table

Steel office chair Godrej

Meggar 5 KV Digital

Foam Fire Extinguiser 9 Ltr.

33 KV LINE MATERIAL

8.5 MRT. LONG STP 410 SP-23(BPHD GAL.)

9 MRT. LONG STP 410 SP-33(BPHD GAL.)

11 MTR. LONGSTP 410 SP-55(BPHD GAL.)

MS ANGLE 65X65X6 mm

MS CHANNEL 100X50 mm

MS CHANNEL 125X65 mm

11 kV POLYMER DISC INSULATOR (B&S) TYPE

33 kV POLYMER DISC INSULATOR (B&S) TYPE

11 kV POLYMER PIN INSULATOR WITH PIN

33kV 10KN POLYMER PIN INSULATOR WITH PIN

DISC FIT. B&S TYPE DOG/RACOON 70 KN

DISC FIT. B&S TYPE WEASEL/RABBIT 45 KN

X ARM ANGLE 65X65X6 mm V TYPE 11 kV

X ARM CHANNEL 100X50 mm V TYPE 33 kV

EARTHING ROD MS 20X2500mm

GI WIRE 4mm/8mm SWG

GI WIRE 5mm/6 SWG

STAY SET GI 20X1800mm

STAY WIRE GI 7/4.0 mm 7/8 SWG

ACSR WEASEL

ACSR DOG

Bolt & Nut 150x12 mm

Bolt & Nuts 50x16 mm

Eye Bolt 190x16 mm With Nut & Bolt

E-Clamp for SP-55

Bracing Clamp for SP-55 with N/B

LT Shackle Insulator Clamp

E- CLAMP

E- Clamp for SP-33

F Clamp

PG CLAMP FOR WEASEL

EARTH WIRE CLAMP FOR SP-55 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-55

Stay Clamp for SP-55 With Nut & Bolt

STAY CLAMP FOR SP-33 WITH NUT & BOLT

EARTH WIRE CLAMP FOR SP-23 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-33

PG Clamp For Dog Conductor

EARTH WIRE CLAMP FOR SP-33 WITH N/B

PP & CLAMP WITH N&B ST POLE SP-23

Stay Clamp D/E for SP33 With N&B

Shackle Insulator

G.S Earth wire 7/16 SWG

BRACING CLAMP BOTTOM FOR SP-23 WITH N/B

TOP BRACING CLAMP BOTTOM WITH N&B SP-33

33KV Biometric crimping Lug

33 KV IPC with Al. Ball for Earthing

33 KV Tension clamp with Bail & IPC

33 KV IPC for covered to covered conduct

33 KV IPC for covered to Bare conductor

33 KV Mid span jointing kit

33 KV Cable Ties for Insulator

CABLE HOLDING GI CLAMP

Number Plate with Clamp (SP-33)

Number Plate with Clamp (SP-55)

Danger board with Clamp (SP-33)

Danger board with Clamp (SP-55)

PP & CLAMP WITH NUT & BOLT FOR GUARDING

PP CLAMP FOR SPECIAL TYPE BRACKET

33KV AAAC COVERED COND. AL-59, 160 SQMM.

ALUMINIUM BINDING WIRE

BARBED WIRE

Stone Pad 300x300x75mm

Item rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Instructions to Bidders:- 1. All materials shall be as per technical specification. PRICE SCHEDULE : Installation/Erection charges including Testing and commissioning (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

New Substation 2X5 MVA

33 KV SUB STATION MATERIAL ERRECTION WORK

NSI_EARTH FILLING

NSI_SPECIAL EARTHING

NSI_SUPPLY OF GRAVEL

CEMENT CONCRETING WORK IN RATIO 1:4:8

Cement concreting work in ratio 1:1.5:3

BRICK WORK IN 1:4 RATIO

CEMENT PLASTER WORK

DISMANTLING OF YARD STRUCTURE

ERECTION OF TERMINAL GANTRY

Making cable trench.including fabrication, fixing of MS angle 50/40X6 mm size (excluding cost of MS angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.75 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal etc.

BRICK WORK 1:6 SUB STRUCTURE

FABRICATION OF STEEL

ERECTION OF SINGLE SP-10 POLE

ERECTION OF SP-23 DOUBLE POLE

ERECTION OF SP-55 DOUBLE POLE

PAINTING OF SP-10 POLE

PAINTING OF TG

LAYING OF U/G LT CABLE IN TRENCH

LAYING OF U/G 33 KV CABLE IN TRENCH

LAYING OF U/G 33 KV CABLE(TRECNCHLESS)

FIXING OF FUSE SET

FIXING OF LIGHTNING ARRESTOR

FIXING OF 11 KV XLPE JOINTING KIT

FIXING OF 33 KV XLPE JOINTING KIT

MANUAL SHIFTING OF 11 KV VCB I/C

SHIFTING OF 5 MVA T/F

ERECTION OF POWER T/F(5 MVA)

ESCAVATION OF EARTH FOR STRUCT. ERECTION

GROUTING OF STRUCTURE IN CC 1:3:6

ERECTION CHARGES OF STRUCTURE

INSTALLATION OF 33 KV CT WITH ALL CONN.

ERECT.11 KV VCB(O/G-B/C-I/C)PANEL

FIXING OF 33 KV ISOLATOR VERTICAL TYPE

ERECTION OF 33 KV VCB

ERECTION & LAYING LT ARM CABLE 4X10

INSTALLATION / FIXING OF 33 KV ISOLATOR

LAYING OF CONTROL CABLE

SUPPLY & FIXING COPPER CONN. NEUTRAL BUS

STRAIGHTHNING & LAYING OF GI STRIP

EARTHING OF STRUCTURE USING GI STRIP

ERECTION OF 33KV CONTROL PANEL

LAYING,SPREAD & STRING BUS BAR CONDUCTOR

LAYING OF 11 KV CABLE

COMM.OF 33/11KV VCB PANEL

ERECTION OF LINE ISOLATOR STRUCTURE

COMPLETE TESTING WIRING

PAINTING OF 33KV VCB PANELS.

ERACTION PROVIDING & FIXING OF WIRE MESH

INST.OF 33KV POST INSULATOR WITH ALL CON

ERECTION OF BUS ISOLATOR STRUCTURE

FIXING ACCESSORIES ON DOUBLE POLE SP-55

PAINTING OF DOUBLE POLE (SP-23)

INSTALLATION OF LINE/ BUS ISOLATOR

INSTALLATION OF DCDB INCLUDING TESTING

INSTALLATION OF ACDB INCLUDING TESTING

FIXING AND ERECTION OF 33 KV O/D PT

ERECTION OF BUS GANTRY

ERECTION OF LIGHTNING EQUIPMENTS

ERECTION OF 24 VOLT BATTERY SET

ERECTION OF STAY POST

FABRICATION OF R.S. JOIST 175X85 SQ.MM.

PAINTING OF ISOLATOR

PAINTING OF 33 KV CT STRUCTURE

PAINTING OF 33 KV PT STRUCTURE

PAINTING OF BUS GANTRY

INSTALLATION OF FIRE EXTINGUISHERS

ERECTION OF NAME PLATES

PAINTING OF WIREMESH FENCING

PAINTING OF STAY POST

PAINTING OF POST INSULATOR STRUCTURE

ERECTION OF 24 VOLT BATTERY CHARGER

PAINTING OF ISOLATOR/LA/CT/ STRUCTURE

33 KV LINE ERRECTION WORK

CEMENT CONCRETING WORK IN RATIO 1:4:8

ERECTION OF EARTHING ROD

FABRICATION OF STEEL

ERECTION OF 33 KV STAY SET

ERECTION OF SINGLE SP-33 POLE

ERECTION OF SINGLE SP-55 POLE

ERECTION OF SP-33 DOUBLE POLE

ERECTION OF SP-55 DOUBLE POLE

ERECTION OF SP-33(11KV/33 KV) FOUR POLE

ERECTION OF SP-55(11KV/33 KV) FOUR POLE

PAINTING OF SP-33 POLE

ERECTION OF BRACKET IN 11 KV LINE

LAYING OF DOG CONDUCTOR IN HT LINE

GUARDING OF 33 KV LINE

LOPPING & CHOPPINGOF TREE BRANCHES

ESCAVATION OF EARTH FOR STRUCT. ERECTION

FIXING OF 33 KV TENSION CLAMP WITH IPC

FIXING OF 33 KV SUSPENSION TIES

FIXING OF 33 KV IPC FOR CC TO CC COND.

FIXING OF 33 KV IPC FOR CC TO BARE COND.

FIXING OF 33 KV MID SPAN JOINTING KIT

FIXING OF 33 KV BIMETALIC LUG

FIXING OF IPC WITH AL. BAIL FOR EARTHING

ERECTION OF TRI POLE FOR ST POLE SP-33

LAYING SPREADING,STRINGING AAAC CONDUCT.

PAINTING OF SINGLE POLE (SP-55)

PAINTING OF DOUBLE POLE (SP-33)

PAINTING OF DOUBLE POLE (SP-55)

PAINTING OF TRI POLE (SP-33)

PAINTING OF FOUR POLE (SP-33)

PAINTING OF FOUR POLE (SP-55)

ERECTION OF STUD STAY

SHIFTING REALIGNMENT 11KV SP,DP/ LT LINE

PQR sheet for Construction of 02Nos 2x5MVA Substation (Pakhi District Chamoli and Sara District-Dehradun) along with its associated 33KV Lines on turnkey basis against e-tender specification no. CCP-I/27/2025-2026.

PART-I TO BE OPENED ON 22.02.2026

Estimated Cost of the work : 1253.76 Lac

NAME OF BIDDER with Complete Address

Contact No. & Name

Email id

The bidder must have valid class A Electrical Contractor license for carrying out specified work of Uttarakhand State authority. Bidder who has such license of other state may also apply, but in such case, bidder shall obtain license of Uttarakhand State authority and shall submit copy of the same to executing authority of UPCL prior to start of work. (Hard copy of the same must be submitted)

The bidder must have successfully executed at least one No. 33/11kV or higher voltage class Sub-station on turnkey basis for any Govt. Department / SEBs /Power Sector Utilities / Govt. Undertaking during the last five (5) years as on the date of bid opening and which must be in satisfactory operation for at least one (1) year as on the date of bid opening. Bidder shall provide performance certificate for the same issued from Govt. Department / SEBs / Power Sector Utilities / Govt. Undertaking. (Hard copy of the same must be submitted). Further, if the bidder has been awarded any work by UPCL during last five (5) years as on the date of opening of Part-I of the tender, overall performance of the bidder should have been satisfactory and the bidder should have successfully completed the work as per respective agreement.

In order to fulfill the above qualifying conditions the bidder can form a consortium/joint venture of maximum two companies. In such cases the technical experience and the financial figures of each partner of the consortium/joint venture shall be added to determine the bidder’s compliance of the above minimum qualifying criteria. Either partner or both partners (jointly) shall comply qualification requirement set forth at point No. 1&2. Such collaboration should continue to be in operation till completion of the work/jobs and guarantee period thereafter, otherwise performance bank guarantee shall be forfeited by UPCL.(Hard copy of the same must be submitted)

For the purpose of this particular bid, bidder shall meet the following minimum criteria

MINIMUM AVERAGE ANNUAL TURNOVER (MAAT) (IN CRORES) Minimum Annual Average Turnover (MAAT): MAAT of the bidder, for best three years out of last five financial years should not be less than Rs. 1880.64 Lac. Bidder shall submit Audited Balance sheet along with the bid.

Liquid Assets (LA): LA and /or evidence of access to availability of credit facility of a bidder, in any case should not be less than 40% (forty percent) of the estimated cost.

Net Worth: Net worth of the bidder should be atleast 20% (twenty percent) of estimated cost.

For bidders to qualify for more than one package, the MAAT, LA & Net worth requirement shall be the sum of MAAT, LA & Net worth requirement of each quoted package.

In case of joint venture, the figures for each of the partner of the joint venture shall be added together to determine the bidder’s compliance with the minimum qualifying criteria set out at point No. 4.0; however in order for a joint venture to qualify, the partner(s) of joint venture must meet the following minimum criteria for above work:-

(i) The lead partner of joint venture shall meet, not less than 40% of the minimum criteria given at point No. 4.1, 4.2 & 4.3 above.

(ii) Each of the other partner(s) of joint venture shall meet not less than 25% of the criteria given at point No. 4.1, 4.2 & 4.3 above.

Failure to comply with this requirement will result in rejection of the joint venture’s bid.

No member of the joint venture is eligible for bidding in individual capacity nor would be eligible in associating in more than one joint ventures.

Relevant documents in supports of above must be furnished along with undertaking of collaborator/Joint venture partner.

An undertaking on Rs 100/ non judicial stamp paper duly notarized by notary that the bidder (Both joint venture partners in case bid is submitted by joint venture) has not been blacklisted/ debarred by any Govt.undertaking/Govt.departments/SEB’s/ Power Sector Utilities. In case same is found then their tender/Order shall be treated as cancelled at any stage and EMD/Performance security shall be forfeited. (Hard copy of the same must be submitted)

Bidder must submit the Power of attorney in respect of tender signature (As per proforma enclosed) (Appendix-1.1) (Hard copy of the same must be submitted)

Bidder must submit the JOINT VENTURE AGREEMENT (On non-judicial stamp paper of appropriate value to be Purchased in the name of joint venture) (As per proforma enclosed) (Appendix-1.6) (Hard copy of the same must be submitted)

Bidder must submit the POWER OF ATTORNEY FOR JOINT VENTURE (On Non-judicial Stamp Paper of Appropriate value to be Purchased in the Name of Joint Venture) (As per proforma enclosed) (Appendix-1.2)(Hard copy of the same must be submitted)

Bidder must submit the "Evidence of access to or availability of credit/facilities" (As per proforma enclosed) (Appendix-1.7)

Bidder must submit Validity of offer for 180 days from the date of opening of tender on 100/- Stamp paper alongwith Rs.1/- revenue stamp (As per proforma enclosed) (Section -2 Appendix-1.9) (Hard copy of the same must be submitted)

Earnest money in shape of BG /DD /FDR/CDR should be valid for 180 days from the date of opening of tender + 45 days claim period.(Appendix 1.3). (Give Details)

Following documents is also to be submitted alongwith tender document:-

1. Complete Name of Bidder.

2. Complete Address of Bidder with address proof.

3. Registered office address of the bidder with address proof.

4. Copy of GSTIN of Bidder,

5. Details of Principal Place of Business Declared alongwith additional place of business declared by the Bidder.

6. Copy of PAN of Bidder.

7. Documentary evidence towards constitution of bidder.

8. Authorisation of the person for signing the documents and his ID & Address Proof.

9. Commodities / Services to be supplied by the bidder along with their HSN/SAC.

10. CIN in case of corporate bidder/ Copy of Registration under Indian Partnership Act in case of partnership firm.

11. List of Directors/ Partners with their PAN & DIN (if any) or ID & Address proof of Proprietor.

Any other information regarding financial and organizational capabilities etc. to ascertain your capacity to complete the project in time.

An undertaking on Rs 100/ non judicial stamp paper duly notarized by notary that all the information provided by us in the bid document are true and Correct.

Any deviation

Name of bidder

Designation

Address