SPECIAL REPAIR TO ROAD AND ROAD FURNITURE FROM CP-01 TO MES PUMP HOUSE CIRCLE AND WIDENING OF ROAD FROM CP-01 TO MES POWER HOUSE NO. 2 IN JODHPUR MIL STN UNDER GE (A) CENTRAL

Amount

Surface excavation not exceeding 15 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L for WBM 75 mm thick (compacted thickness) in 2 Layers, with coarse aggregates of grading 2 (63 to 40mm size), rolled 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M&L for 200 mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

Preparing surfaces of WBM by brooming with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface gunny bag to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 10 kg per 10 Sqm, complete all as specified and as directed.

M&L for laying Premix bituminous, macadam (Bitumen content 4% by wt of total mix) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on blacktop surfaces complete all as specified and as directed.

M & L for bituminous premix semi-dense asphaltic concrete 30 mm consolidated thickness using paving bitumen VG-30 with 5.5% binder content by weight of total mix. Rolled and compacted to required camber and gradient complete, and rolled with 8 to 10 tonne power roller complete all as specified and directed. Note : Bitumen used in the work shall be paving bitumen grade VG-30 irrespective whatever specified.

M & L for Stone kerb of roughly squared stones of size 10cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar (1:6) and struck flush complete all as specified and directed.

M&L for preparing bituminious surfaces of road and marking 2.5 mm thick centre line, stop line, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint with 8% glass beads of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

S&F of retro reflective road cat eyes of size 100 x 100-90 x 18-20 mm with fine grained micro glass particles of regular size with bottom portion embedded on road surface using cut back bitumen emulsion complete all as specified and directed.

M&L Moorum/red bajri spread, rolled and consolidated to gradient alongside paved roads as in berms incld necessary watering & rolling complete all as specified and directed.

Repair to potholes any depth , not exc 1 sqm each including sweeping free from dust and mud or water , scouring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth , making good by filling in sceened & graded road metal, watering and well ramming (including supply of road metal)

Preparing surfaces of existing black top surfaces by brooming with wire brushes for removing caked mud etc sweeping with gunny bag to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on blacktop surfaces complete all as specified and as directed.

S&F in repair Solar delinator height 1000 x 47 mm made of polycarbonate and toughened Aluminium alloy body. Height 145 mm, diameter 80 mm, comprises of 4 super bright LEDs which give 360 degree viewing. Solarpanel-2.5V, 120 mm (approx) 1.25 V rechargable battery 01 No, back-up-12 hours of continues lighting at night complete all as specified and directed.

S&F of solar reflective studs ABS body 100 x 100 x 18.50mm blinker high quality and fixed with epoxy adhesive as approved by GE & as directed by Engineer-in-Charge.

S & F in repair factory made reflective safety traffic Mirror, 900 mm dia for road and side walk of stainless steelface, 0.90 mm thick large radius of curvature for minium distance distrotation orange powder coated steel back and hood orange vinyl extrusion with 75 mm clamp brackets for pole mouting complete all as specified and directed.

M&L for chipping damaged surface of road thickness not more than 50 mm all as directed including removing screened materials to out side MOD land, complete all as specified and directed.

New Vishvakarma Udhyog

RISING ELECTRICALS