Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.6 LAccepted-AOC CHATHANATTU HOUSE XXIII 362B 1 AYYANKALI ROAD EDAKOCHI KOCHI 682 010 | KOCHI | ERNAKULAM | KERALA | 682010 | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹53.6 L+₹6.7 L (14.3%)Rejected-Finance KATTUPADATH H AZHEEKAL PO VYPEEN 682508 | KOCHI | ERNAKULAM | KERALA | 682508 | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW)KOCHI
GARRISON ENGINEER (NW) MILITARY ENGINEER SERVICES NAVAL BASE POST -682 004
AS PER BOQ AND TENDER DOCUMENT
2023_MES_591583_1
8223_GE_NW
Open Tender
Civil Works
Item Rate
365 days
KOCHI
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE(NW)KOCHI
₹98,000
Yes
3 Aug 2023
27 Apr 2023
29 May 2023
27 Apr 2023
27 May 2023
10 May 2023
27 Apr 2023 - 15 May 2023
Amount
Taking down chowkats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Demolition of brick work / PCC block masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Demolition of reinforcement cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removal of all demolished material from site complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
Dismantling wall/floor tiling incl. cement mortar bedding, removing rubbish off the premises outside MD land complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.
M&L for PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L for Pre Cast cement concrete block masonry 1:3:6 type C1 with solid blocks, exe 10cm in width and setting in CM 1:6 complete all as specified and directed.
M&L for 8 mm thick rendering in CM 1:4 with approved water proofing compound over backing coat of 12 mm thick in CM 1:6. mm thick on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed..
M&L for preparation of new plastered external wall surface and applying two coats of weather proof (Apex Ultima) paint over a coat of suitable primer with necessary sealant base coat complete all as specified and directed.
M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls complete all as specified and directed.
M & L for preparation new wall surfaces and applying one coat of chalk whiting on new plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted complete all as specified and directed.
M&L Complete removal of existing treatment of wall using water jet, mechanical grinders including rubbing, washing down with water, etc and applying two coats of oil emulsion distemper over a coat of primer after preparing the surfaces complete all as specified and directed.
M&L for applying one coats of white washing on old ceiling surfaces complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.
M&L for hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 1:2:4 Type B-2 using 40 mm graded stone aggregate 100mm thick as in floor/ paving/ hard standings and similar works complete all as specified and directed.
S&F Machine cut polished,kota stone slab flooring 20-25mm thick with white marble border over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing match laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. Note: The rate quoted shall be inclusive of cost of white marble border. Design shall be as directed.
M&L for Non skid ceramic coloured tiles 300x300 mm not less than 7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 600x300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10 mm thick rendering CM 1:3 complete all as specified and directed. .
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, as per specification & drawing in SSR Part II complete.
S&F extruded aluminium alloy handle 150 mm fabricated type anodised complete all as specified and directed..
M&L for 100 mm size, butt hinges stainless steel complete all as specified and directed..
M&L for 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified and directed.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified
S&F Powder coated anodised aluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium bedding complete all as specified and directed.
S&F door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, fixed complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed.
M&L for 9 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed.
S&F 140mm Floor door stopper of aluminium and tongue alloy brass body and tongue with hard draw steel spring complete all as specified & directed..
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old steel surface and painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with one coats of synthetic enamel paint complete all as specified and directed.
M&L for Rolled sections (Tubular sections) as in main pillars and cross beams, hip and jack rafters, purlins where connected to common rafters and fixed with angle cleats or other connecting plates complete all as specified and directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
S & F of welded galvanised steel wire fabric in n.exc 4 kg per sqm to wood or steel members complete all as specified and directed
S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed.
S&F in repairs 15mm dia fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm dia fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 15mm Concussive pushbutton taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe. complete all as specified and directed.
S & F in repair 15mm bore dia fancy type Pillar cock, complete all as specified and directed
S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F vitreous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F half round PVC eaves gutters 150 mm dia with union sockets and joints set in approved jointing compound incl iron brackets complete all as specified and directed.
S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing etc complete all as specified and directed.
Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed .
M & L for Anodised aluminium snap grid frame work for false ceiling, wall panelling etc, size of grid 605 x 605 mm using wall angle 25x25x2mm, main Tee 38x25x1.5mm and cross Tee 25x25x1.4mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long incl provn of 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework and preparation of surface and applying three coat of white washing complete all as specified and directed..
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed..
M&L point wiring with 1.5 Sqmm PVC insulated unsheathed HRFR multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic on wall except beam, column and RCC roof and chases cutting incl 1.6 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch complete all as specified and directed...
All as per item No 62.above but for one 5 pin 5 amps socket outlet an independent board complete all as specified and directed
All as per item No 62 above but with 4.0Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board complete all as specified and directed.
All as per item No 62 above but with 4 Sqmm copper conductor including 4 Sqmm copper cable on earth wire for industrial plug and socket complete all as specified and directed.
S & F modular switch 1 way 6 Amps,1 module complete all as specified and directed.
S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
S & F socket modular 6 Amps and 2/3 pin 2 module complete all as specified and directed..
S & F Modular socket 6 A/16 A - 2/3 pin 2 module complete all as specified and directed.
S & F switch 15 A One way SP modular type complete all as specified and directed.
S & F in repair fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.
Taking down existing Light fittings of any type and size and removing to store yard. Complete all as specified and directed.
S&F LED Tube light fitting 25w ,4 ft with extruded aluminium batten for continues operation connected accessories complete all as specified and directed. Make:- Philips Cat Part No BN 021 LED25S 6500 PSU GR S1 or Equivalent approved make
S & F LED Mirror light fitting 10 watt with extruded aluminium batten for continues operation connected accessories complete all as specified and directed. Make:- Philips Cat Part No. BN 021 LED10S 6500 PSU GR S1 or Equivalent approved make
S&F building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 30 Watt including suitable GI bracket of 40 mm dia and fixing arrangement on walls complete all as specified and directed. Make:- Crompton Cat Part No. LSTS-30-CDL/NL-M or Equivalent approved make
S&F LED flood light made up of pressure die cast housing with toughened glass and high power 50 with option of secondary optic with IP 66 protection, 3000 K, with 10 KV SPD of 50 watt complete all as specified and directed. Make:- Crompton Cat Part No. LFL-50-CDL/60-Mor Equivalent approved make
S&F Flame proof/ Weather proof LED tube light fitting (4 feet) suitable for 2 x 20 watt with glass & connector suitable for LED tube light with all accessories prewired, product in Al. die cast alloy LM6 construction of Gas Gr. IIA, IIB certified by CIMFR dhanbad &CCOE(PESO) Nagpur along with ISI marking including testing complete all as specified and directed. Make:- Crompton part No EXTN2LT8-16/20 /Shyam switch gear/Sudhir or Equivalent
Taking down old DBs with MCBs from existing position including MCB,s complete all as specified and directed.
S&F Sheet metal enclosure SPN DB when MCB's to be used 4 way with 200 amps bus bar double door complete all as specified and directed.
S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door complete all as specified and directed
S&F Sheet metal enclosure TPN DB when MCB's to be used 12 way with 200 amps bus bar double door complete all as specified and directed
S&F SS enclosure suitable for MCCB 160 amp complete all as specified and as directed
S&F MCCB TPN 100 amp ,415 volts ,16 KA with suitable size of enclosure complete all as specified and directed.
S&F MCB TPN 63 amp ,415 volts ,10 KA complete all as specified and directed.
S&F MCB SPN 40 Amp ,240 Volts,10 KA complete all as specified and directed
S&F MCB SP 6 to 32 Amp ,240 Volts,10 KA complete all as specified and directed.
S & F in repair SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable earth plug complete all as specified and directed
S&F Triple Pole and earth enclosure with a three Pin and earth Plug with socket complete with one Triple Pole MCB of size 32 amps complete all as specified and directed
S&F Triple Pole and earth enclosure with a three Pin and earth Plug with socket complete with one Triple Pole MCB of size 63 amps complete all as specified and directed
Taking down old sub main wiring of any size complete all as specified and directed
M&L sub main wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connecting with suitable size thimble complete all as specified and as directed. Note: two run of 4 sqmm size PVE cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length complete all as specified and directed
M&L for sub main wiring with 2 runs of 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor HRFR cable 1100 volts grade drawn through PVC concealed conduit with all accessories on surface, one run of 6Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor HRFR cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 6 Sqmm size PVC copper cable, One run of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.
M&L for sub main wiring with 4 runs of 10 Sqmm HRFR PVC insulated unsheathed multistranded copper conductor cable and 1 run of 16 Sqmm HRFR cable as earth continuity wire and including PVC conduit concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed. Note:- 4 runs of 16 Sqmm sub main wire and one run of 16 sq mm for earthing and casing capping with accessories shall be measured as one unit.
M & L Taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rose to connector to fan complete all as specified and directed.
M&L Taking down 450/350/300mm sweep exhaust fan, preparing the surfaces of exhaust fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No. fixing the fan in its original location, connecting up including provision of cable from ceiling rose to connector to fan complete all as specified and directed.
S&F in repairs Energy efficient ceiling fan of 1200mm sweep (5 star rated) 230 Volt 50 Hz including all electrical complete all as specified and directed. Make:- Havells Cat Part No. ES-40 or Crompton Cat Part No. Maximus (5 star rated) or Equivalent Note:- Old fans shall be deposited to MES store yard.
S&F heavy duty exhaust fans AC single phase 230/ 240 V of size 450 mm sweep, 1400 rpm complete all as specified and directed. Make :- Havells Cat Part No. ES-40 or Crompton Cat Part No. Maximus (5 star rated) Note : Old fans shall be deposited to MES store yard.
Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified and directed.
M&L Earth continuity or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 2mm dia galvanised iron Strip of size 25x4 mm complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.
Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point.
M & L for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specified and directed.
Supply & laying un-reinforced precast concrete cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified and directed.
S&F, jointing, connecting & testing in trenches sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches / ducts/Wall of size 3.5 core 50 Sqmm complete all as specified and directed.
S&F , jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches / ducts/Wall of size 3.5 core 35 Sqmm complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick buried directly in ground(earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iron strip 25 x 4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No.3 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessary excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI light grade protection pipe , common salt, charcoal dust, returning, filling in of soil, removal of soil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounded from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electrode connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as protection pipe for GI wire connected main control board / test point and provided with GI pipe of medium grade 20 mm bore for watering and including funnel, wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion complete all as specified and directed.
Taking down old stop valve, stop cock,bib cock ,swivel shower, from existing position including all fittings complete all as specified and directed
S&F CPVC globe or gate valve 25 mm dia iron wheel head screwed both ends for PVC pipes complete all as specified and directed
S&F of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm complete all as specified and directed
S&F of bib cock short body chromium plated with flange and aerator CP fancy type of size 15mm complete all as specified and directed
S&F of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT complete all as specified and directed
S&F of PVC connections 15mm dia size with PTMT nuts of length 450mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed
Taking down old unserviceable GI tubing of size 25mm dia complete all as specified and directed
Taking down old unserviceable GI tubing of size 20mm dia complete all as specified and directed
S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings complete all as specified and directed
S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings complete all as specified and directed
S&F Ball brass valves (PTMT) of size 25 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
Taking down old float valve synthetic(PVC) of size 25 mm complete all as specified and directed.
S/F float valve synthetic (PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.
Taking down old rotational moulded polythene water storage tanks of capacity1000 litres complete all as specified and as directed.
Supply and fixing of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of capacity 1000 litres complete all as specified and as directed.
M&L for taking down old water storage Heater (Geyser) of any size from existing position including all connection complete all as specified and as directed. Note:- Old geyser shall be deposited to MES store yard.
S&F vertical type Geyser (Water Storage Heater) 25 litres, 230 volt., 50 Hz, working pressure 0.8 mpa with storage tank of mild steel material 5 star rating including necessary grouting complete all as specified and directed. Make : V-Guard Cat Part No. SPRINHOT PLUS or Equivalent approved make
MS BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .