Renovation and Modernization of Bhanja Kala Mandap, Bhubaneswar

ABSTRACT OF COST

RS.) NON SCHEDULED

S.No. DESCRIPTION OF ITEMS (DSR Civil 2023,DSR

AMOUNT (IN RS.)

H&L 2025, DSR E&M

a. Art Gallery and Cafe 1,35,10,773.90 19,71,108.90

b Indoor & Outdoor Renovation 1,71,02,714.65 3,59,04,613.55

Total Cost of Civil Works (1) 3,06,13,488.55 3,78,75,722.45

2 ELECTRICAL & HVAC WORKS

a. Electrical-Auditorium 16,14,270.00 53,37,900.00

b. Facade Lighting 77,66,601.00 36,49,410.00

c. AV System & Networking, CCTV System 12,02,217.00 1,16,47,031.00

d. Lightning Protection System 3,03,502.00

Total Cost of Electrical & HVAC Works (2) 1,35,00,969.00 2,41,64,648.00

3 FIRE PROTECTION SYSTEM WORKS

a. Fire Safety (Sprinkler & Hydrant System) 10,94,309.00 95,822.00

c. Fire Alarm System 11,84,088.00 1,65,200.00

Total Cost of Fire Protection System Works (3) 38,77,136.00 2,97,897.00

Total(DSR+NON DSR) B 11,03,29,861.00

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

ART GALLERY AND CAFE

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

Earthwork Excavation.

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan), including dressing

of sides and ramming of bottoms, for all lift, including getting out

the excavated soil and disposal of surplus excavated soil as

directed, within a lead of 50 m.

a. DSR 2023 2.8.1 All kinds of Soil Cum 151.96 260.30 39,554.15

2 Back Filling.

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

depth, consolidating each deposited layer by ramming and

watering, lead up to 50 and for all lift.

3 Sand Filling.

Supplying and filling in plinth with sand under floors, including

watering, ramming, consolidating and dressing complete.

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

DSR 2023 4.1.6 natural sources : 6 graded stone aggregate 40 mm nominal size Cum 21.99 7,178.75 1,57,864.30

derived from natural sources)

5 Burnt Clay bricks Masonry (1:6) (in F & P).

Brick work with common burnt clay machine moulded perforated

modular bricks of class designation 12.5 conforming to IS : 2222

in exposed brick work including making horizontal and vertical

grooves 10 mm wide 12 mm deep complete in cement mortar

1:6 (1 cement : 6 coarse sand).

From ground level upto plinth level

6 Fly Ash bricks Masonry (1:6) (Superstructure).

Brick work with clay flyash F.P.S. (non modular) brick of class

designation 7.5 in superstructure above plinth level up to floor

five level in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

7 Fly Ash Half bricks Masonry (1:4) (Superstructure).

Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth

level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

8 Antitermite Treatment.

Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm

diameter holes and plugging with cement mortar 1 :2 (1 cement Sqm 120.00 310.05 37,206.00

: 2 Coarse sand) to match the existing floor: With

Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended proportions as per IS:

9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including

pumping of concrete to site of laying, curing, carriage for all

leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge, for

the following grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra cement.

a) Footing & Pedestal Cum 14.90 9,504.75 1,41,658.79

b) Column Up to Plinth Lvl :- Cum 2.43 9,504.75 23,096.54

10 Reinforcement.

Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete

upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

11 Reinforcement.

Steel reinforcement for R.C.C. work including straightening,

DSR 2023 cutting, bending, placing in position and binding all complete

5.22A.6 above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D ormore.

12 12 mm Plastering.

DSR 2023 13.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Sqm 426.53 333.35 1,42,183.78

Digitally signed by JAYA

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

13 15 mm Plastering.

15 mm cement plaster on the rough side of single or half brick

wall of mix : 1:6 (1 cement: 6 fine sand)

14 Marble Flooring

Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20 mm

DSR 2023 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

11.23.1 sand) laid and jointed with grey cement slurry, including rubbing

and polishing complete with :

Makrana white second quality

15 Anti Skid Flooring

DSR 2023 Glazed Vitrified tiles Matt/Antiskid finish of size

11.41A.3.2 Size of Tile 600 x 1200 mm

16 Tile Skirting

Providing and laying Vitrified tiles in different sizes, with water

absorption less than 0.08% and conforming to IS: 15622, of

approved brand & manufacturer, in all colours and shade, in

DSR 2023 11.47 skirting, riser of steps, laid with cement based high polymer Sqm 15.38 1,893.90 29,124.39

modified quick set tile adhesive (water based) conforming to

IS:15477, in average 6 mm thickness, including grouting of

joints (Payment for grouting of joints to be made separately).

Providing and fixing factory made uPVC glazed/wire mesh

doors comprising of lead free uPVC multi-chambered frame, sash

mullion/coupler (where ever required) extruded profiles having

minimum wall thickness of 1.70 mm for Series R1 and R2 profiles

and 2.10 mm for Series R3 and R4 profiles conforming to EN:

12608 in any shape, colour and design duly reinforced with

galvanized mild steel section made of required shape & size as

per CPWD Specification, uPVC extruded glazing beads, interlocks

and Inline sash adaptor (where ever required) of appropriate

dimension, EPDM gasket, hardware, SS 304 grade fasteners of

minimum 8 mm dia with countersunk head, comprising of

matching polyamide PA6 grade sleeve for fixing frame to finished

wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps

and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including

drilling of holes for fixing hardware and drainage of water etc.

After fixing frame the gap between frame and adjacent finished

wall shall be filled with weather proof silicon sealant over backer

rod of approved size and quality, all complete as per approved

drawing conforming to CPWD specification & direction of Engineer-

in-Charge. Section of steel reinforcement and cross sections of

uPVC profiles to be as per design approved by Engineer-in-

9.147.C2 Fixed window / ventilator with mullion / transom.

9.147.C2.1 Using R1 series with frame (33 mm & above )

x (35 mm & above) & mullion (33 mm & above)

x (50 mm & above). (Height upto 0.90 metre)

Casement window double panels with fixed mullion with S.S.304

friction hinges as per size and weight of sash, multi-point locking

system, zinc alloy (zamak) powder coated handles.

17B 9.147.E2 9.147.E2.1 Using R2 series with frame (39 mm & above) x (39 Sqm 35.28 13,078.70 4,61,416.54 -

mm & above) & sash (39 mm & above) x (60 mm & above) &

mullion (39 mm & above) x (60 mm & above). (Height upto 1.2

17C NDSR Providing & fixing 8mm toughened glass Sqm 37.44 2,475.00 - 92,664.000

18 Solid Flush Door

Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) decorative type, core of block board

construction with frame of 1st class hard wood and well matched

DSR 2023 9.20.1 teak 3 ply veneering with vertical grains or cross bands and face Sqm 15.75 3,473.85 54,713.14 -

veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws

19 Sal Wood Frame.

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

DSR 2023 9.1.2 with hold fast lugs or with dash fasteners of required dia & length Cum 0.24 1,16,520.30 27,790.09 -

(hold fast lugs or dash fastener shall be paid for separately). Sal

Providing and fixing bright finished brass tower bolts (barrel

9.74 type) with

necessary screws etc. complete

Providing and fixing bright finished brass handles with screws etc.

9.81 complete:

Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular

type universal hydraulic door closer with IS : 3564, embossed on

9.84 the body, door weight upto 36 kg to 80 kg and door width from each 8.00 ₹ 983.15 7,865.20 -

701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete

Providing and fixing chromium plated brass 100 mm mortice

9.88 latch and lock with 6 levers and a pair of lever handles of each 8.00 ₹ 998.35 7,986.80 -

approved quality with necessary screws etc. complete.

Digitally signed by JAYA

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor

21.180 spring type fixing arrangement and making necessary holes etc. Sqm 10.08 5,325.90 53,685.07 -

for fixing required door fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc.to be paid

NDSR Providing and Fixing H-Handle 600mm SS304 Nos 4.00 2,000.00 8,000.000

NDSR Providing and Fixing Patch Lock Nos 4.00 1,500.00 6,000.000

Providing and applying white cement based putty of average

thickness 1mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

22 Weather Coat.

Finishing walls with Acrylic Smooth exterior paint of required

DSR 2023 13.46 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm Sqm 426.53 160.60 68,500.72

over and including priming coat of exterior primer applied @ 0.90

23 Premium Emulsion Paint

Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less

than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve

even shade and colour.

13.83.2 Two coats

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound )

13.85.3 With water thinnable cement primer on wall surface

VOC content less than 50 grams/litre

24 DSR 2023 12.45 PLAIN GYPSUM FALSE CEILING

Providing and fixing false ceiling at all heights including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm dia x 50 mm long with

6 mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, Sqm 202.77 1,355.80 2,74,915.57 -

shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230

mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and

30 mm long, the perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with 25 mm long dry

wall screws @ 230 mm interval, including fixing of gypsum board

to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150

25 S.S Railing.

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

DSR 2023 10.28 stainless steel dash fasteners , stainless steel bolts etc., of Kg. 2300.00 772.40 17,76,520.00

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Digitally signed by JAYA

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

26 Plinth Protection.

Making plinth protection 50 mm thick of cement concrete 1:3:6

(1 cement : 3 coarse sand (zone-III) derived from natural

sources : 6 graded stone aggregate 20 mm nominal size derived

DSR 2023 4.17 from natural sources) over 75 mm thick bed of dry brick ballast Sqm 31.20 749.30 23,378.16

40 mm nominal size, well rammed and consolidated and grouted

with fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Provding and laying of M20 grade screed concrete over

NS waterproffing layer with maintaing slope as per tech Cum 50.00 8,042.30 -

speecification as per direction of EIC

Structural steel work in single section, fixed with or without connecting plate,

28.1 10.1 including cutting, hoisting, fixing in position and applying a priming coat of Kg 3650.00 117.35 4,28,327.50

approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and

28.2 10.2 framed work, including cutting, hoisting, fixing in position and applying a priming Kg 7650.00 133.70 10,22,805.00

coat of approved steel primer all complete:

Steel work welded in built up sections/ framed work, including cutting, hoisting,

28.3 10.25 fixing in position and applying a priming coat of approved steel primer using -

structural steel etc. as required.

In stringers, treads, landing etc of staircase including use of chequered plate

wherever required all complete

28.3.2 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 6250.00 172.60 10,78,750.00

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)

trusses etc., including cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer, including welding and bolted with special shaped

washers etc., complete.

28.4 10.16.1 Hot finished welded type tubes Kg 12534.88 194.40 24,36,781.45

Providing, supplying and fixing galvanized profiled metal deck

sheet of approved thickness and profile, fixed with self-

29 NDSR drilling/self-tapping screws, washers, laps, accessories and Sqft 3438.10 290.00 - 9,97,048.500

necessary supports, complete as per approved specifications and

direction of Engineer-in-Charge.

Providing and laying water proofing treatment to vertical and

surfaces of depressed portions of W.C., kitchen and the like

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with

proofing compound conforming to IS : 2645 in recommended

proportions including rounding off junction of vertical and

horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3

mixed with water proofing compound in recommended proportion

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied

kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at

PVC sheet should be 100 mm wide and pasted to each other with

Providing and applying two-component Polyurea Hybrid

waterproofing system over prepared surface, including

application of approved primer, silica sand broadcasting as

required, application of Polyurea waterproofing membrane of

specified thickness, treatment of junctions and coving wherever

30A NS required, including necessary preparation and sealing at all Sqm 175.00 2850.00 4,98,750.00

penetrations/grouting locations, and providing and laying

protective geotextile over the waterproofing membrane,

complete in all respects as per the Technical Specifications,

manufacturer’s recommendations and as directed by the

Engineer-in-Charge.

Providing and Fixing of Granite Wash basin counter made of

19mm thick Granite counter-top of approved shade over 12mm

Thick bison board fixed over MS Angle. Rate to include for

200mm granite fascia along the outer perimeter of the counter-

top on 2 sides.The fascia & counter-top shall have R-10 corner

31 NDSR edges along the top and bottom edges as per the drawing. Rate Nos 8.00 10250.00 82,000.00

to include all hardware, MS brackets for support from the

masonry wall, etc complete. Rate to include cutting of counter-

top for accomodating the Washbasin bowl and CP fittings, and

fixing the granite end beading with bull nosing to the cut-

perimeter to neat finish.

Providing and fixing in position mirror of approved make 5.5 mm

thick float glass, of approved quality, including edge polishing,

32 NDSR fixed within black powder-coated metal profile frame, including Nos. 8.00 6250.00 50,000.00

all necessary accessories and fixing hardware, complete in all

respects as per approved design, drawings and direction of

Providing and fixing Roller blinds of approved make, shade,

texture as directed made from high-quality as specified. The

33 NDSR system shall include all mounting brackets, fasteners, Sqm 35.28 3380.00 1,19,246.40

accessories, and fittings, installed complete as per site

requirements and approved drawings.

34 DSR Electrical Works

Digitally signed by JAYA

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

1 DSR 2025 1.10.3 modular switch, modular plate, suitable GI box and earthing the Nos. 50.00 1704.00 85,200.00

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC

insulated copper conductor single core cable in surface/ recessed

2 DSR 2025 1.12 medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR Rmt. 600.00 373.00 223800.00

PVC insulated copper conductor single core cable for loop

earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the

following sizes of FRLS/HFFR PVC insulated copper conductor,

3 DSR 2025 1.14.2 single core cable in surface/ recessed medium class PVC conduit Rmt. 700.00 311.00 217700.00

as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supply & Fixing of following sizes of medium class PVC conduit

4 DSR 2025 1.21 along with accessories in surface/recess including cutting the wall

and making good the same in case of recessed conduit as

Supplying & Fixing suitable size GI Box with moduler plate &

5 DSR 2025 1.31 cover infront on surface or in recess including providing & fixing Each 40.00 545.00 21,800.00

3pin 5/6A moduler socket outlet and 5/6 A moduler switch,

connections etc as required

Supplying & Fixing suitable size GI Box with moduler plate &

cover infront on surface or in recess including providing & fixing

6 DSR 2025 1.32 6pin 5/6A & 15/16A moduler socket outlet and 15/16 A moduler Each 40.00 659.00 26,360.00

switch, connections etc as required

Supplying, drawing, Testing and commissioning of

Cat6A UTP 4 pair, 23 AWG solid copper cable in

existing conduit/ on surface, U/FTP, LSZH, Non-

Plenum, Horizontal (solid) Cable suitable for high

speed data networking application supporting upto

10Gbps over a 100 meter channel. The 4 Unshielded

Twisted Pairs (UTP) cable with color coded insulation

7 for easy indentification should have FLAME Rmt. 400.00 74.00 29,600.00

PROPERTIES i.e. Flammability Test - IEC 60332-1,

Smoke Density - IEC 61034, LSZH standards

compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE

802.3an, RoHS. Delay Skew should be < 45NS. The

outer Cable Diameter should be 7.5 + 2 mm. Cable

should have been tested and verified by UL/ ETL etc.

complete as required.

Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point ( without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper conductor single core

8 DSR 2025 1.54.3 cable in surface/ recessed PVC conduit, and earthing the point Nos. 100.00 1246.00 1,24,600.00

with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable etc. as required. Group C

Providing and fixing GI cable tray of required width and

thickness, including straight lengths, bends, tees, reducers and

accessories, fabricated from pre-galvanized/GI sheet with

perforated as approved. The tray shall be supported on channel

supports suspended ceiling mounted, fixed with approved

clamps, anchor fasteners, nuts and bolts. Item includes cutting,

9 DSR 2025 4.6.4 drilling, joining with couplers, proper alignment and leveling, and Rmt. 50.00 1062.00 53,100.00

routing of electrical cables as required. All metal parts to be

properly treated with anti-rust coating where applicable. Work to

be carried out complete with all materials, labour, tools and

accessories, complete in all respects as per drawings,

specifications and engineer-in-charge’s instructions. size

300mmx50mmx1.6mm

18watt LED Down lighter (COB Type) (System lumen

efficacy ≥120 lm/Watt )

Supplying, Installation, Testing & Commissioning of LED

Recessed/ surface Down lighter (Round / square/ Rectangular)

COB Type of following body material and construction as per IS :

10322 with driver as per the requirement with Driver efficiency

>85%, Operating voltage AC 140-270 Volt,frequency 50/60 hz,

Operating temp range -5 0C to 40 0C, internal surge protection

of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80 , UGR (Unified Glare

Rating) < 19, Flicker free (flicker should be below 5 %), life time

(LED, Driver & electrical circuitry), life time of minimum 50000

10 DSR 2025 8.5.4 Burning Hours with, 70% of initial Lumen maintained till life ends Nos 50.00 1470.00 73500.00

, CCT 3000°K / 4000 K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour

Matching) <3, Maximum power consumption should not more

than the specified rating and Fixture shall be of relevant BIS

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen

printing on housing. OEM must have its own in house NABL lab

all testing facilities for LED fixtures. "complete in all respect i/c

external connections with 1.5 sq mm FRLS/HFFR, PVC insulated

copper conductor single core cable and earthing etc. as required

with Minimum 5 year OEM warranty. System lumen efficacy

≥120 <135 lm/Watt output . LM79 & LM80 Test report and all

Digitally signed by JAYA

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

18 watt LED Down lighter (SMD Type) (System lumen

efficacy >135lm/Watt)

Supplying, Installation, Testing & Commissioning of LED

Recessed/surface Down lighter (Round /square/Rectangular)

SMD type of following body material with PMMA and prismatic

construction as per IS : 10322 with driver as per the requirement

with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge

protection of 2.5 KV with Short & Open circuit protection ,THD <

10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <

11 DSR 2025 8.3.4 19, Flicker free, (flicker should be below 5 %), life time (LED, Nos 50.00 1004.00 50200.00

Driver & electrical circuitry), life time of minimum 50000 Burning

Hours with 70% of initial

Lumen maintained till life ends as per LM80 extrapolation IES TM-

21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per

SDCM(Standard Deviation Color Matching) <3, Maximum power

consumption should not more than the specified rating and

Fixture shall be of relevant BIS standard. Manufactures Word

Mark/ Name Engraved/ Embossing/ Screen printing on housing.

complete in all respect i/c external connections with 1.5 sq mm

FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required with Minimum 5 year OEM warranty.

System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test

Supplying, installation, testing & commissioning of TV point With

Socket complete as required.

Supplying, installation, testing & commissioning of Telephone

point Socket complete as required.

35 Plumbing Works

Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

1 DSR 2023 12.41 with seal ring conforming to IS : 5382, leaving 10 mm gap for Rmt 60.00 248.80 14,928.00

thermal expansion, (i) Single socketed pipes.

12.41.1 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

2 DSR 2023 12.42 conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal

2c Single tee with door 12.42.3.1 75x75x75 mm Each 4.00 164.20 656.80

2d Single tee with door 12.42.3.2 110x110x110 mm Each 4.00 234.15 936.60

Digitally signed by JAYA

Sl.no. DSR/NDSR Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount NDSR Amount

2e Single tee without door 12.42.4.1 75x75x75 mm Each 4.00 144.30 577.20

2f Single tee without door 12.42.4.2 110x110x110 mm Each 4.00 221.35 885.40

Providing and fixing C.P. brass stop cock (concealed) of standard

and of approved make conforming to IS:8931.

18.52.1 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

thermal stability for hot & cold water supply and all CPVC plain &

4 DSR 2023 18.7 brass

threaded fittings, including fixing the pipe with clamps at 1.00 m

This includes jointing of pipes & fittings with one step CPVC

4a DSR 2023 18.7.2 20 mm nominal dia Pipes Rmt 100.00 335.00 33,500.00

4b DSR 2023 18.7.3 25 mm nominal dia Pipes Rmt 100.00 401.55 40,155.00

Providing and fixing white vitreous china extended wall mounting

closet of size 780x370x690 mm of approved shape including

5 17.78 providing & fixing white vitreous china cistern with dual flush Nos. 4.00 14999.15 59,996.60

fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8

litres), including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete.

Providing and fixing counter top Wash Basin of rectangular shape

6 NDSR all required to complete the work and make it functional. All Nos. 8.00 7750.00 62,000.00

complete as per design and specifications.

Providing and fixing white vitreous china flat back half stall urinal

of size 580x380x350 mm with white PVC automatic flushing

cistern, with fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P. brass) with waste

7 17.5 fitting as per IS : 2556, C.I. trap with outlet grating and other Nos. 4.00 12071.55 48,286.20

couplings in C.P. brass, including painting of fittings and cutting

and making good the walls and floors wherever required : 17.5.1

Single half stall urinal with 5 litre P.V.C. automatic flushing

8 NDSR Supply & fixing of Nahani trap with Stainless Steel jali. Nos. 8.00 450.00 3,600.00

Providing, Installation, testing and commissioning ABS health

9 NDSR faucet unit comprising of CP flxible hose, spary, wall flange etc. Nos. 4.00 1950.00 7,800.00

Providing and fixing CP Brass single lever wall mounted basin

10 NDSR mixer with 150mm extension of premium quality Nos. 4.00 8650.00 34,600.00

Providing and fixing PTMT Waste Coupling for wash basin and

11 17.69 sink, of approved quality and colour. Nos. 8.00 115.30 922.40

Waste coupling 31 mm dia of 79 mm length and 62 mm

breadthweighing not less than 45 gms

Providing and fixing PTMT towel rail complete with brackets fixed

to wooden cleats with CP brass screws with concealed fittings

12 17.73 arrangement of approved quality and colour. 17.73.2 600 mm Nos. 4.00 708.95 2,835.80

long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms.

13 NDSR Providing and fixing in position Robe hook complete Nos. 8.00 650.00 5,200.00

Providing and fixing PTMT towel ring trapezoidal shape 215 mm

long, 200mm wide with minimum distances of 37 mm from wall

14 17.72 face with concealed fittings arrangement of approved quality and Nos. 4.00 231.95 927.80

colour, weighing not less than 88 gms.

Providing and fixing PTMT liquid soap container 109 mm wide,

15 17.71 high and 112 mm distance from wall of standard shape with Nos. 4.00 168.35 673.40

bracket of the same materials with snap fittings of approved

quality and colour, weighing not less than 105 gms.

Providing and fixing in position Toilet paper holder complete of

approved of make CP Brass

Providing and fixing PTMT soap Dish Holder having length of 138

17 18.65 breadth 102 mm, height of 75 mm with concealed fitting Nos. 4.00 111.45 445.80

weighing not less than 106 gms.

Providing and fixing CP Brass 32mm size Bottle Trap of approved

18 17.22A quality & make and as per the direction of Engineerin-charge. Nos. 8.00 1034.80 8,278.40

Providing and fixing C.P. brass angle valve for basin mixer and

19 18.53.1 geyser points of approved quality conforming to IS:8931 : 15mm Nos. 8.00 574.30 4,594.40

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

Indoor & Outdoor Renovation

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Indoor Renovation

1 Fly Ash bricks Masonary (1:6) (Superstructure).

Brick work with clay flyash F.P.S. (non modular) brick of class

DSR 2023 designation 7.5 in superstructure above plinth level up to floor

6.32.2 five level in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended proportions as per IS:

9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including

DSR 2023 pumping of concrete to site of laying, curing, carriage for all

5.33 leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge, for

the following grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra cement.

d) Column in Super - Structure :- Cum 1.944 9,860.40 19,168.62

3 Reinforcement.

Steel reinforcement for R.C.C. work ready to use “cut and bend”

rebars of approved make from factory/workshop to construction

DSR 2023 site including placing in position and binding all complete upto

5.22B.1 plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or

4 12 mm Plastering.

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Sqm 251.050 333.35 83,687.52

5 15 mm Plastering.

DSR 2023 15 mm cement plaster on the rough side of single or half brick

13.2.2 wall of mix : 1:6 (1 cement: 6 fine sand)

6 Cement Concrete Flooring.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate) finished with a floating coat of neat

cement, including cement slurry, but excluding the cost of nosing Sqm 140.000 614.20 85,988.00

of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

7 Anti Skid Flooring

Glazed Vitrified tiles Matt/Antiskid finish of size

Size of Tile 600 x 1200 mm

8 Italian Flooring

Providing and laying machine cut, mirror polished Marble stone

in required design (Simple geometrical, abstract etc.) and in

combination with Italian marble stones of different colours,

finished surface texture etc., in linear portions of the building, all

complete as per the architectural drawings, with 18 mm thick

11.52 stone slab laid over 20 mm (average) thick base of cement Sqm 220.000 6,927.35 15,24,017.00 -

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

white cement slurry @ 4.4 kg/sqm, including pointing with white

cement slurry admixed with pigment to match the marble shade,

including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge.

11.52.1 18 mm thick Italian Marble stone slab, Perlato, Rosso

Fire Red or Dark Emperadore etc.

9 Tile Skirting

Providing and laying Vitrified tiles in different sizes, with water

absorption less than 0.08% and conforming to IS: 15622, of

approved brand & manufacturer, in all colours and shade, in

skirting, riser of steps, laid with cement based high polymer Sqm 50.000 1,893.90 94,695.00

modified quick set tile adhesive (water based) conforming to

IS:15477, in average 6 mm thickness, including grouting of

joints (Payment for grouting of joints to be made separately).

Providing and laying 18 mm thk machine cut & machine polished

Granite door frame on toilet area a prefinished surface with 1:3

10 NDSR cement sand mortar. Rate shall be inclusive of machine polishing Rmt. 60.000 2,500.00 - 1,50,000.00

edges and four side edge chamfering in case of protruding edges

& groove if ordered. complete as per drawings and site

11 NDSR Italian Washbasin Counter

Providing & fixing washbasin counter made of ms angle frame

with bison board finish with italian 18-20mm thick.

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Providing and laying water proofing treatment to vertical and

surfaces of depressed portions of W.C., kitchen and the like

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with

proofing compound conforming to IS : 2645 in recommended

proportions including rounding off junction of vertical and

horizontal surface.

DSR 2023, (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3

mixed with water proofing compound in recommended proportion

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied

kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at

PVC sheet should be 100 mm wide and pasted to each other with

bitumen @ 1.7 kg/sqm).

13 Solid Flush Door

Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) decorative type, core of block board

construction with frame of 1st class hard wood and well matched

teak 3 ply veneering with vertical grains or cross bands and face Sqm 50.000 3473.85 1,73,692.50 -

veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws

14 Sal Wood Frame.

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length Cum 1.000 1,16,520.30 1,16,520.30 -

(hold fast lugs or dash fastener shall be paid for separately). Sal

Providing and fixing bright finished brass tower bolts (barrel

9.74 type) with

necessary screws etc. complete

Providing and fixing bright finished brass handles with screws etc.

9.81 complete:

Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular

type universal hydraulic door closer with IS : 3564, embossed on

9.84 the body, door weight upto 36 kg to 80 kg and door width from each 25 ₹ 983.15 24,578.75 -

701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete

Providing and fixing chromium plated brass 100 mm mortice

9.88 latch and lock with 6 levers and a pair of lever handles of each 25 ₹ 998.35 24,958.75 -

approved quality with necessary screws etc. complete.

15 Cubicle Partition

Providing & Fixing of Modular Toilet Cubicals of approved size

made up of 12 mm thk HPL(High Pressure Laminate)Board

NDSR assembled with all modular/modern Hardware with adjustable Nos 4.000 29,500.00 1,18,000.00

s.s/Nylon legs finished with door of same material of size 600

mm(W)x1715 mm(H) & as per manufacturer specifications.

16 M.S. Grill.

Providing and fixing M.S. grills of required pattern in frames of

windows etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete. Kg 150.000 238.35 35,752.50

Fixed to openings /wooden frames with rawl plugs screws

17 Cement Primer.

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound)

With water thinnable cement primer on wall surface having OC

content less than 50 grams/litre

18 Weather Coat.

Finishing walls with Acrylic Smooth exterior paint of required

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm Sqm 151.050 160.60 24,258.63

over and including priming coat of exterior primer applied @ 0.90

19 Plastic Emulsion

Wall painting with premium acrylic emulsion paint of interior

grade, having VOC (Volatile Organic Compound ) content less

DSR 2023 than 50 grams/ litre of approved brand and manufacture,

13.83 including applying additional coats wherever required to achieve

even shade and colour.

13.83.2 Two coats

Providing and applying white cement based putty of average

DSR 2023 thickness 1mm, of approved brand and manufacturer, over the

13.80 plastered wall surface to prepare the surface even and smooth

Providing and applying plaster of paris punning in average 8 to

12 mm thickness on walls and columns to bring the surface in

21 NDSR plumb line and level. Item to be completed in all respects Sqm 100.000 450.00 45,000.00

including scrapping of existing neeru surface, cleaning etc. as per

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

38 mm thick wood block flooring of first class teak wood laid over

25 mm thick leveling layer of cement concrete 1:2:4 (1 cement :

2 coarse sand: 4 graded stone aggregate 10 mm nominal size)

DSR 2023 to be paid separately, coated with a thin layer of hot bitumen

11.34 penetration 80/25 (blown type) @ 2.45 kg per sqm, including

fixing blocks in position after dipping in

hot bitumen (blown type) up to half depth, planed, levelled

smooth and finished complete.(Stage)

Prividing & fixing Vinyl anti static 2-3mm thick of approved

23 NDSR colour, shade inluding adhesive with surface preparation etc Sqm 25.000 1,850.00 46,250.00

complete all respect.(Electrical Panel Room)

Prividing & fixing Vinyl flooring 5mm thick of approved colour,

24 NDSR shade inluding adhesive with surface preparation etc complete all Sqm 102.266 3,200.00 3,27,250.00

respect.(Back Stage with corridor)

Supply, Installation, Testing and Commissioning of High-

Resolution Large Format LED Video Wall/LED Display System of

25 NDSR min. 20 ft x 10 ft for Stage Background Including Supporting each 1.000 28,50,000.00 28,50,000.00

Structural Framework, Control System, Power Supply

Arrangement, and Allied Works Complete.

Auditorium Writing pad Chair Theatre Pushback Chair

Product Type-Push Back

Material-Fire rated velvet upholstery

26 NDSR Back Angle-Adjustable Nos 276.000 19,500.00 53,82,000.00

Seating Capacity-1 Person

Design Type-Standard

Size-23inch, Premium Quality

Chesterfield Sofa

Frame material-Natural Wooden framing

Seat Material-Fire rated Velvet seat

Primary Color-Red Wine, Deep Purple

27 NDSR Usage/Application-Auditorium Nos 14.000 30,500.00 4,27,000.00

Size/ Dimensions (LxW)-34"D x 76"W x 35"H

Cushion Included-No

Appearance-Modern and Premium Quality

VVIP Portable Sofa

Frame material-Natural Wooden framing

Seat Material-Fire rated Velvet seat

Primary Color-Red Wine, Deep Purple

28 NDSR Usage/Application-Auditorium Nos 10.000 30,500.00 3,05,000.00

Size/ Dimensions (LxW)-34"D x 76"W x 35"H

Cushion Included-No

Appearance-Modern , Premium Quality

Providing & Supplying Chairs with fabric upholstery.(Changing

Providing & Fixing Table made of 19mm ply finished with

approved 1mm thick laminate etc complete.(Changing Room)

Providing and fixing locker storage unit of size 4’-0”(1200mm)

width × 450mm depth × 2100mm height (or as per drawing).

Carcass: Made of 18mm BWR grade plywood / pre-laminated

MDF / particle board, finished with laminate inside and outside;

internal finish with white laminate and exposed edges sealed with

1mm thick PVC edge banding. Shutters: 18mm thick board

shutters, externally finished with 1.0mm decorative laminate

(approved shade) and internally with white laminate. Each

shutter fitted with soft-closing concealed hinges (Hettich / Hafele

/ Ebco equivalent).

Compartments: Designed as locker-type divisions, each with

individual locking system (cam lock / pad lock arrangement).

Handles: SS finish / aluminum profile handles or cutout pull-type,

as approved.(Changing Room)

Providing and placing bench of size as per drawing 1200mm

length × 450mm depth × 450mm height). Structure: Frame

made of seasoned hardwood Top made of 25mm thick solid wood

plank / laminated board with edge moulding, finished with

Laminate. Legs / base: Hardwood members frame with level

adjusters.(Changing Room)

Providing & making Vanity Counter made of 19mm bwp plywood

finished in laminate as per approved drawings & specifications

Providing & Supplying Wooden Chairs with fabric upholstery.(VIP

Providing & Fixing 3 seater sofa with fabric upholstery.(VIP

Providing & Fixing 2 seater sofa with fabric upholstery.(VIP

Providing & Fixing Centre Table made of MS Frame with

approved Italian Stone etc complete.(VIP Lounge)

Providing & Fixing Side Table made of MS Frame with approved

Italian Stone etc complete.(VIP Lounge)

Providing and Fixing Vinyl Mural Graphics/Artwork on Identified

39 NDSR Wall Surfaces for Urban Beautification and Public Space Sqm 800.000 4,250.00 - 34,00,000.00

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Providing and fixing aluminium framework in 600 x 600 mm grid

system using approved aluminium sections fixed from wall with

suitable hangers and fasteners, including perimeter L-angle

1 NDSR support, providing and placing 50 mm thick 24 kg/m³ density Sqm 350.000 3,450.00 - 12,07,500.00

glass wool insulation wrapped with tissue paper and secured with

GI chicken mesh of approved gauge, including all accessories,

scaffolding, cutting, wastage, labour, T&P and making complete

as per approved drawings and direction of Engineer-in-Charge.

Providing and fixing approved make channelled/perforated

wooden acoustic wall panelling having NRC 0.60 comprising 15

mm thick, 192 mm wide and 2400 mm long moisture resistant

MDF/Fibre board substrate with decorative laminated finish on

exposed face in approved shade and melamine balancing layer

on the reverse side. The panel shall have specially designed

acoustic perforation/channel pattern comprising 3 mm wide

grooves with 13 mm visible panel surface or equivalent approved

configuration to achieve required acoustic performance. The

reverse face of panel shall be provided with factory bonded

acoustical non-woven fleece/Soundtex backing to achieve Noise

Reduction Coefficient (NRC) of 0.60 tested as per ASTM C423.

2 NDSR The panelling shall have tongue and groove edge profile for Sqm 380.000 4,550.00 - 17,29,000.00

seamless appearance and fixing through concealed clips over

approved make extruded aluminium keel/grid system of size

3000 mm (L) × 24 mm (H) × 15.5 mm (W) or equivalent, fixed

to wall with necessary aluminium splines, cleats, anchor

fasteners, screws and accessories complete. The system shall be

suitable for relative humidity resistance up to 70% RH with

permissible camber less than 1 mm/1000 mm and bow less than

The work shall include all materials, labour, scaffolding, cutting,

wastage, fittings, fixtures and making complete in all respects as

per approved drawings, manufacturer’s specifications and

direction of Engineer-in-Charge.

Providing and fixing 9 mm thick Acoustic PET panel of approved

make, texture and shade on wall surface, backed with 12 mm

thick BWR/BWP grade plywood fixed to wall framework/substrate

with necessary screws, fasteners and approved adhesive

complete. The acoustic PET panel shall be fixed over plywood

backing using approved high-strength adhesive including

necessary cutting, edge finishing, groove alignment, levelling and

making openings for electrical points/services wherever required.

The work shall include all materials, labour, adhesive, fixing

accessories, edge trims (if required), scaffolding, T&P, wastage

and finishing complete in all respects as per approved design,

drawings and direction of Engineer-in-Charge.

FABRICATION WORK

1 NDSR MS SPEAKER PLATFORM SUPPORTING FROM WALL Sqm 16.000 6,500.00 - 1,04,000.00

Providing & fixing M.S speaker platform in M.S angle 75x 75 mm

as per drawing with 2 layers of 19mm thk ply & fixing 19mm thk

rigid rubber on ply complete with fabrication, levelling etc.

complete including one coat of Red oxide paint and two coat of

Black paint as approved M.S. angle will be supported at 1200mm

c/c, the depth of the platform will be as per site condition

FIRST CEILING IN GLASSWOOL & CHICKEN MESH.

Providing and fixing of G.I frame work of Gypsum India with

Intermediate channel of 45 x 15 x 0.8 mm thk @ 900 c/c in one

Direction & ceiling section of 80 x 26 x 0.5 mm @ 450 c/c in

other direction as per specification of company include perimeter

channel with 50 mm thk 32kg/m3 density glasswool + Black RP

tissue paper. Entire frame/glasswool shall be covered with

chicken mesh of G.I 19 x19 mm square of 14 guage (as per

approved sample) including Micron tissue paper,machine screw &

levelling etc by instruction of site engineer.

2 PLAIN GYPSUM FALSE CEILING Sqm 460.000 1,355.80 6,23,668.00

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Providing and fixing false ceiling at all heights including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm dia x 50 mm long with

6 mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230

mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and

30 mm long, the perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with 25 mm long dry

wall screws @ 230 mm interval, including fixing of gypsum board

to ceiling section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150

3 NDSR ROCKFON TILE CEILING OR ECOPHON TILE CEILING Sqm 245.000 2,850.00 6,98,250.00

Providing & Installing of the Rockfon 600 x 1200mm x 15mm thk

0.95NRC value tiles with connected grid system of Rockfon

weighing 3kg/m3.The tiles shall be Black matt with the Black

glass tissue paper,including cutting of spot light,AC diffuser,

return air grill, Sprinkler & other related services & providing

necessary 6 mm thk ply support & redoing the same in good

finish etc complete.

Providing and fixing tiled false ceiling of specified materials of

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main “T”

runner with suitably spaced joints to get required length and of

size 24x38 mm made from 0.30 mm thick (minimum) sheet,

spaced at 1200 mm center to center and cross “T” of size 24x25

mm made of 0.30 mm thick (minimum) sheet, 1200mm long

spaced between main “T” at 600 mm center to center to form a

grid of 1200x600 mm and secondary cross “T” of length 600 mm

and size 24x25 mm made of 0.30 mm thick (minimum) sheet to

be interlocked at middle of the 1200x600 mm panel to form

grids of 600x600 mm and wall angle of size 24x24x0.3 mm and

laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc. Main “T” runners to

be suspended from ceiling using GI slotted cleats of size 27 x 37

x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm GI adjustable rods with galvanised

butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm

center to center along main T, bottom exposed width of 24 mm

of all T-sections shall be pre-painted with polyester paint, all

complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

12.52.2 GI Metal Ceiling Lay in perforated Tegular edge global

CARPET FLOORING, EDGE NOSING, SKIRTING

Providing and fixing approved quality carpet flooring with foam

1 NDSR backing/PU foam underlay including adhesive fixing, edge sqm 330.000 3,500.00 - 11,55,000.00

trimming, finishing complete as directed by Engineer-in-Charge.

P/F 75x50mm ply nosing in 12mm thick MR ply on intermediate

2 NDSR steps anchored firmly to provide base for fixing step lights on Rmt 220.000 550.00 - 1,21,000.00

existing racks complete as required

Providing, supplying & fixing powder coated aluminium edge

3 NDSR nosing profile with/ without inbuilt LED lighting system for Rmt 220.000 1,450.00 3,19,000.00

auditorium/step illumination complete with all respects.

Providing and fixing aluminium transition profile between carpet

and inside door frame complete as required as per specification.

Providing and fixing skirting of 100mm height made out of 12

mm thick BWR plywood backing, finished with 1.0 mm thick

approved laminate on exposed surface, including necessary

5 NDSR adhesive, screws, nails, edge finishing, polishing of exposed Rmt 300.000 725.00 - 2,17,500.00

edges, cutting, fitting, making grooves wherever required and

fixing in position complete as per approved design complete in all

Providing & Fixing 10mm toughened glass 600mmx900mm urinal

1 NDSR partition with froasted film and fixed to wall including necessary Nos 7.00 5,500.00 38,500.00

fitting etc complete

Providing and fixing in position mirror of approved make 5.5 mm

thick float glass, of approved quality, including edge polishing,

fixed within black powder-coated metal profile frame, complete

2 NDSR with integrated backlit LED lighting system, including all Nos. 14.00 7750.00 1,08,500.00

necessary accessories and fixing hardware, complete in all

respects as per approved design, drawings, and Architect’s

specifications.

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Providing & Fixing Full height mirror 5.5mm for changing room

with ply backing support etc complete with all respect

Providing and fixing Single glazed partitions of 10mm thick

toughened glass as per Drawings using Full Height glass partition

systems of approved equivalent and shall be able to provide a

sound reduction of 36 dB. The glass panels shall be supported by

3 NDSR Aluminium WCP Profiles of 25x45mm on all 4 sides of the Glass Smt. 93.50 6000.00 5,61,000.00

partition perimeter. Glass-to-glass butt joints shall be done using

Aluminium ' I ' profile of 5x11mm, and corner glass junctions to

have 90° corner Aluminium profile. At Glassperpendicular 'T'

junctions, Aluminium T-junction profile to be used.Finishes of all

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor

21.180 spring type fixing arrangement and making necessary holes etc. Sqm 15.000 5,325.90 79,888.50 -

for fixing required door fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc.to be paid

NDSR Providing and Fixing heavy duty Hydraulic floor spring Nos 6.00 8,500.00 51,000.000

NDSR Providing and Fixing H-Handle 800mm SS304 Nos 6.00 2,250.00 13,500.000

NDSR Providing and Fixing Patch Lock Nos 6.00 1,500.00 9,000.000

Providing and fixing port hole framework with 19mm thick ply

frame. The edges to be finished with the wooden beading and ply

5 NDSR to clad with 1mm thick black laminate. Work to be done as per Nos 2.00 4,500.00 9,000.00

instructions from site in-charge. Size of port hole- 600mm x

P/F trap doors of overall size 600x600 in ceiling, made out of

wooden frame work screwed to existing ceiling G.I. framework,

6 NDSR shutters made out of 12mm thick MDF and finished with 1.0mm Nos 10.00 3,500.00 35,000.00

thick laminate including necessary hardware, adhesive etc.

complete as per detailed drawings.

Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

DSR 2023 with seal ring conforming to IS : 5382, leaving 10 mm gap for

12.41 thermal expansion, (i) Single socketed pipes.

12.41.1 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded

DSR 2023 fittings/ accessories for unplasticised Rigid PVC rain water pipes

2 conforming to IS : 13592 Type A, including jointing with seal ring 0.00

conforming to IS : 5382, leaving 10 mm gap for thermal

2c Single tee with door 12.42.3.1 75x75x75 mm Each 7.00 164.20 1,149.40

2d Single tee with door 12.42.3.2 110x110x110 mm Each 7.00 234.15 1,639.05

2e Single tee without door 12.42.4.1 75x75x75 mm Each 7.00 144.30 1,010.10

2f Single tee without door 12.42.4.2 110x110x110 mm Each 7.00 221.35 1,549.45

Providing and fixing C.P. brass stop cock (concealed) of standard

DSR 2023 design

18.52 and of approved make conforming to IS:8931.

18.52.1 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

thermal stability for hot & cold water supply and all CPVC plain &

threaded fittings, including fixing the pipe with clamps at 1.00 m

This includes jointing of pipes & fittings with one step CPVC

4a 20 mm nominal dia Pipes Rmt 140.00 335.00 46,900.00

4b 25 mm nominal dia Pipes Rmt 140.00 401.55 56,217.00

Providing and fixing white vitreous china extended wall mounting

closet of size 780x370x690 mm of approved shape including

5 17.78 providing & fixing white vitreous china cistern with dual flush Nos. 10.00 14999.15 1,49,991.50

fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8

litres), including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete.

Providing and fixing counter top Wash Basin of rectangular shape

6 NDSR all required to complete the work and make it functional. All Nos. 26.00 7750.00 2,01,500.00

complete as per design and specifications.

Supply and installation of Thermostatic Control Face Plate as per

7 NDSR approved make, all connectors and accessories asrequired etc. Nos. 4.00 13425.00 53,700.00

Providing and fixing white vitreous china flat back half stall urinal

of size 580x380x350 mm with white PVC automatic flushing

cistern, with fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P. brass) with waste

7 17.5 fitting as per IS : 2556, C.I. trap with outlet grating and other Nos. 9.00 12071.55 1,08,643.95

couplings in C.P. brass, including painting of fittings and cutting

and making good the walls and floors wherever required : 17.5.1

Single half stall urinal with 5 litre P.V.C. automatic flushing

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

8 NDSR Supply & fixing of Nahani trap with Stainless Steel jali. Nos. 34.00 650.00 22,100.00

Providing, Installation, testing and commissioning ABS health

9 NDSR faucet unit comprising of CP flxible hose, spary, wall flange etc. Nos. 10.00 2550.00 25,500.00

complete of make (Jaquar model No. ALD-CHR-573)

Providing and fixing CP Brass single lever wall mounted basin

mixer with 150mm extension of quality & make

Providing and fixing PTMT Waste Coupling for wash basin and

11 17.69 approved quality and colour. Nos. 22.00 115.30 2,536.60

17.69.1 Waste coupling 31 mm dia of 79 mm length and 62 mm

weighing not less than 45 gms

Providing and fixing PTMT towel rail complete with brackets fixed

to wooden cleats with CP brass screws with concealed fittings

12 17.73 arrangement of approved quality and colour. 17.73.2 600 mm Nos. 9.00 708.95 6,380.55

long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing in position Robe hook complete of approved

Providing and fixing PTMT towel ring trapezoidal shape 215 mm

long, 200mm wide with minimum distances of 37 mm from wall

14 17.72 face with concealed fittings arrangement of approved quality and Nos. 9.00 231.95 2,087.55

colour, weighing not less than 88 gms.

Providing and fixing PTMT liquid soap container 109 mm wide,

15 17.71 high and 112 mm distance from wall of standard shape with Nos. 9.00 168.35 1,515.15

bracket of the same materials with snap fittings of approved

quality and colour, weighing not less than 105 gms.

Providing and fixing in position Toilet paper holder complete of

approved of make CP Brass

Providing and fixing PTMT soap Dish Holder having length of 138

17 18.65 breadth 102 mm, height of 75 mm with concealed fitting Nos. 9.00 111.45 1003.05

weighing not less than 106 gms.

Providing and fixing CP Brass 32mm size Bottle Trap of approved

18 17.22A quality & make and as per the direction of Engineerin-charge. Nos. 22.00 1034.80 22,765.60

Providing and fixing C.P. brass angle valve for basin mixer and

19 18.53.1 geyser points of approved quality conforming to IS:8931 : 15mm Nos. 22.00 574.30 12,634.60

Antitermite Treatment.

Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm

20 diameter holes and plugging with cement mortar 1 :2 (1 cement Sqm 950.000 310.05 2,94,547.50

: 2 Coarse sand) to match the existing floor: With

Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Supplying, Installation, Testing and Commissioning (SITC) of

Hydraulic Passenger Lift of approved make for G+1 floors (02

stops / 02 landings) having capacity of 13 passengers with

automatic centre opening/telescopic doors, operating speed of

0.3 m/s, complete with hydraulic power pack unit, guide rails, lift

machine, controller, cabin, landing doors, car operating panel,

landing operating panel, safety devices and all accessories

required for smooth and safe operation.

The lift shall comprise aesthetically finished stainless steel/MS

powder coated cabin with anti-skid flooring, LED lighting,

handrail, automatic rescue device (ARD), overload indicator,

emergency alarm, intercom, door safety sensor, emergency stop

switch, limit switches, buffers, guide shoes, hydraulic

jack/cylinder, controller panel, wiring, earthing and all associated

accessories complete.

The system shall operate on single phase power supply and shall

be complete in all respects including necessary structural

supports, brackets, grouting, commissioning, statutory approvals,

testing, warranty and handing over as per approved

specifications and direction of Engineer-in-Charge.

Type: Hydraulic Lift

Stops: G+1 (02 Stops)

Door Type: Automatic

Power Supply: Single Phase

Dismantling and removing existing wall panelling including

careful dismantling, stacking of serviceable materials (if

required), disposal/removal of unserviceable materials, debris

22 NDSR and malba from site to approved dumping location, complete Sqm 432.00 190.00 82,080.00

with all labour, tools & plants, loading, unloading, lead and lift,

and making good disturbed surfaces as directed by the Engineer-

Demolishing cement concrete manually/ by mechanical means

including disposal of material within 50 metres lead as per

23 15.2 direction of Engineer - in - charge. cum 20 2434.25 48,685.00

15.2.1 Nominal concrete 1:3:6 or richer mix (including

equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means

24 15.3 stacking of steel bars and disposal of unserviceable material cum 10 3551.25 35,512.50

metres lead as per direction of Engineer - in- charge.

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable

within 50 metres lead as per direction of Engineer-in-charge. In

Dismantling doors, windows and clerestory windows (steel or

26 15.12 shutter including chowkhats, architrave, holdfasts etc. complete

stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below Each 25.00 367.20 9,180.00

15.12.2 Of area beyond 3 sq. metres Each 5.00 502.75 2,513.75

Dismantling tile work in floors and roofs laid in cement mortar

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning

28 15.56 surface for plaster including disposal of rubbish to the dumping Sqm 100.00 54.65 5,465.00

within 50 metres lead.

Removing dry or oil bound distemper, water proofing cement

29 13.91 the like by scrapping, sand papering and preparing the surface Sqm 1500.00 25.15 37,725.00

including necessary repairs to scratches etc. complete.

Structural steel work riveted, bolted or welded in built up

sections, trusses

30 DSR 10.2 and framed work, including cutting, hoisting, fixing in position Kgs 3000.000 133.70 4,01,100.00

and applying a priming coat of approved steel primer all

Providing & fixing M12 Chemical fastener with hole making &

drilling complete with all respects

Painting with synthetic enamel paint of approved brand and

DSR 2023 manufacture of required colour to give an even shade : Two or

13.62.1 more coats on new work over an under coat of suitable shade

with ordinary paint of approved brand and manufacture

Outdoor Renovation

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

DSR 2023 exceeding 1.5 m in width or 10 sqm on plan), including dressing

2.8 of sides and ramming of bottoms, for all lift, including getting out

the excavated soil and disposal of surplus excavated soil as

directed, within a lead of 50 m.

a. All kinds of Soil Cum 40.42 260.30 10,521.90

2 Back Filling.

Filling available excavated earth (excluding rock) in trenches,

DSR 2023 plinth, sides of foundations etc. in layers not exceeding 20cm in

2.25 depth, consolidating each deposited layer by ramming and

watering, lead up to 50 and for all lift.

Supplying and stacking of good earth at site including royalty and

2a carriage upto 5 km lead complete (earth measured in stacks will cum 30.00 803.75 24,112.50

be reduced by 20% for payment).

3 Sand Filling.

DSR 2023 Supplying and filling in plinth with sand under floors, including

2.27 watering, ramming, consolidating and dressing complete.

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural

sources : 6 graded stone aggregate 40 mm nominal size derived Cum 25.000 7,178.75 1,79,468.75

from natural sources)

5 Burnt Clay bricks Masonry (1:6) (in F & P).

Brick work with common burnt clay machine moulded perforated

modular bricks of class designation 12.5 conforming to IS : 2222

DSR 2023 in exposed brick work including making horizontal and vertical

6.31.1 grooves 10 mm wide 12 mm deep complete in cement mortar

1:6 (1 cement : 6 coarse sand).

From ground level upto plinth level

6 Fly Ash bricks Masonry (1:6) (Superstructure).

Brick work with clay flyash F.P.S. (non modular) brick of class

DSR 2023 designation 7.5 in superstructure above plinth level up to floor

6.32.2 five level in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

7 Fly Ash Half bricks Masonry (1:4) (Superstructure).

Half brick masonry with common burnt clay F.P.S. (non modular)

DSR 2023 bricks of class designation 7.5 in superstructure above plinth

6.13.2 level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland

Slag cement, admixtures in recommended proportions as per IS:

9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including

DSR 2023 pumping of concrete to site of laying, curing, carriage for all

5.33 leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge, for

the following grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to

either re-design the mix or bear the cost of extra cement.

a) Footing,column & Beam Cum 20.000 9,504.75 1,90,095.00

b) Lintel, Roof slab Cum 20.000 9,860.40 1,97,208.00

9 Reinforcement.

Steel reinforcement for R.C.C. work including straightening,

DSR 2023 cutting, bending, placing in position and binding all complete

5.22.6 upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

10 12 mm Plastering.

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Sqm 150.000 333.35 50,002.50

11 15 mm Plastering.

DSR 2023 15 mm cement plaster on the rough side of single or half brick

13.2.2 wall of mix : 1:6 (1 cement: 6 fine sand)

12 Marble Flooring

Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20 mm

DSR 2023 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

11.23.1 sand) laid and jointed with grey cement slurry, including rubbing

and polishing complete with :

Makrana white second quality

13 Centering and Shuttering

Centering and shuttering including strutting, propping etc. and

of form work for :

4.3.1 Foundations, footings, bases for columns Sqm 30.000 392.15 11,764.50

Retaining walls, return walls, walls (any thickness)

4.3.2 including attached pilasters, buttresses, plinth and string Sqm 10.000 842.50 8,425.00

courses fillets, kerbs and steps etc.

4.3.3 Columns, piers, abutments, pillars, posts and struts Sqm 30.000 961.30 28,839.00

14 Granite Flooring

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge.

Polished Granite stone slab of colour Black, Cherry/Ruby

Red or equivalent

14a Granite Cladding

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement,mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing of edges to give high gloss finish etc. complete at all

DSR 2023 Granite stone slab of colour black, Cherry/Ruby red

8.2.2 8.2.2.1 Area of slab upto 0.50 sqm

15 Decorative Architectural Work

Providing and applying decorative architectural treatment to

external façade, comprising moulded/corniced bands, decorative

pilasters/ columns, architraves etc. in cement mortar as per

NDSR approved architectural design, including necessary scaffolding, Sqm 155.000 3,250.00 - 5,03,750.00

surface preparation, fixing, joints, neat finishing and two coats of

exterior-grade paint, complete as directed by Engineer-in-

Providing and applying white cement based putty of average

DSR 2023 thickness 1mm, of approved brand and manufacturer, over the

13.80 plastered wall surface to prepare the surface even and smooth

17 Weather Coat.

Finishing walls with Acrylic Smooth exterior paint of required

13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm Sqm 200.000 160.60 32,120.00

over and including priming coat of exterior primer applied @ 0.90

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Providing and fixing 20-25 mm thick machine-cut, approved-

quality natural sandstone cladding on the external facade at all

height levels. The scope of work includes preparing the backing

surface, applying backing mortar (typically cement-sand mix),

using stainless steel (SS-304 grade) cramps for dry or semi-dry

18 NDSR mechanical anchoring, precise cutting, dressing, specialized Sqm 50.000 8,500.00 4,25,000.00

carving, mouldings, and architectural grooves as per design. The

rate must also include staging, heavy-duty scaffolding, structural

jointing with approved weather-resistant sealants/grouts, surface

cleaning, and finishing complete in all respects as per the

approved architectural drawings and design based report.

Providing, fabricating, and fixing Glass Fiber Reinforced Concrete

(GRC / GFRC) Architectural Elements including decorative

cornices, brackets, architraves, pediments, column capitals, and

bases of approved design and profile. The elements shall be

manufactured using AR (Alkali Resistant) glass fibers, high-grade

Portland cement (Grade 53), and premium aggregates,

maintaining a uniform thickness of 12mm to 15mm. Installation

must be done strictly in true line and level using structural GI/MS

brackets, anchors, and stainless steel fasteners fixed to the

RCC/brickwork. Structural joints between components are to be

filled with non-shrink grout and finished seamlessly with weather-

grade acrylic sealant. The rate shall include material cost,

fabrication mold setup, safe lifting, scaffolding at all heights,

installation hardware, tools, tackles, and finishing ready for

painting, complete as per architectural drawings and instructions

of the Engineer-in-charge.

a. NDSR GRC Decorative Cornice (6" to 12" projection) Rmt 80.000 2,300.00 1,84,000.00

b. NDSR Ornate Column Capitals (Pillar Top Wraps) Nos 20.000 15,500.00 3,10,000.00

Providing and fixing/executing traditional Odisha decorative

plaster work of approved design and pattern, including

preparation and setting out of the surface, application of cement

mortar of specified grade and proportion, forming of traditional

Odisha architectural motifs, ornamental bands, floral/geometrical

patterns, mouldings, carvings, relief work and other decorative

elements as per approved architectural drawings, with necessary

reinforcement/supports wherever required, proper finishing,

profiling, smoothening and curing, including scaffolding, staging,

surface preparation, all materials, cement, sand, admixtures,

water, pigments/finish coats where specified, skilled

artisan/labour, tools,

tackles, transportation, lifting, wastage and all incidental works,

complete in all respects as per approved design, architectural

drawings, technical

specifications and directions of the Engineer-in-Charge.

Providing, development and executing artistic mural paintings on

public walls/facades for Urban Beautification, Cultural Promotion,

and Tourism Enhancement, including surface preparation, crack

filling, exterior primer, theme curation, painting with lightfast

21 NDSR exterior acrylics, and a protective anti-graffiti UV-resistant Sqm 40.000 7,500.00 3,00,000.00

aliphatic polyurethane topcoat, complete

in all respects at all heights as per approved design, architectural

drawings , Technical Specification, DPR and directions of Engineer-

Providing and Fixing Toughened/Tempered Glass Door with

3 NDSR Stainless Steel Fittings, Floor Spring, Handles, Locking Nos 2.000 2,57,493.00 - 5,14,986.00

Arrangement, and Allied Hardware Complete.

Providing and Fixing Premium Decorative Main Entrance/Exit

Door with High Quality Frame, Shutter, Designer Finishing, SS

Hardware Fittings, Locking Arrangement, Decorative Elements

and Allied Civil & Finishing Works Complete.

Installation of Decorative Lord Ganesh Statue with Architectural

5 NDSR Pedestal, Landscaping, Illumination, and Associated Development Nos 1.000 12,00,000.00 12,00,000.00

Dismantling of Existing Staircase and Construction of New RCC

Staircase including Demolition, Disposal of Debris, RCC Works,

Reinforcement, Formwork, Finishing and Allied Civil Works

Providing, fabricating, and installation of outdoor LED public

display boards made of MS/GI frame with ACP/vinyl graphic

panel, foundation, painting, illumination, and all allied works

Providing, supplying, installing, testing and commissioning of 400

kVA, 415V, 3-phase, 50 Hz CPCB-IV+ compliant silent type

Diesel Generator Set complete with diesel engine, alternator,

AMF control panel, acoustic enclosure, anti-vibration mountings,

residential silencer, fuel tank, battery and charger, foundation

bolts, earthing, cable termination and all accessories as required

for complete operation, including transportation,

loading/unloading and commissioning at site.

Digitally signed by JAYA

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate NDSR Rate DSR Amount. NDSR Amount.

Supplying Installation, Testing and Commissioning of on-grid

Solar Photovoltaic Power Plant conforming to various applicable

standards BIS, IEC, MNRE guidelines, the Central Electricity

Authority Regulations and CPWD Specifications as amended up to

date, consisting of Mono/Poly Crystalline silicon solar cells

module, net metering facility, necessary control, protections,

earthing, cabling, mounting structure, junction boxes, power

conditioning units, Real time online web interfaced Data

Monitoring System, Distribution panels, grid connecting

arrangement, conduits, pipes, cable trays and other accessories

etc. as required.

a) High Energy Efficiency Solar Photovoltaic Module of capacity

DSR 2025 330 Wp or above, manufactured in India, conforming to IS

17.1 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2.

Solar Photovoltaic Module conversion efficiency shall not be less

than 23% at STC with temperature coefficient of Pmax better

than -0.30% per 0C. PV modules used in solar power plants/

systems must be warranted for their output peak watt capacity,

which should not be less than 90% at the end of 10 years and

80% at the end of 25 years. Solar Modules shall be designed to

operate in relative humidity upto 100% with temperature

between -10 0C and +85 0C. Further, each PV module used in

any solar power project must have Radio frequency identification

tag with information such as name of manufacturer, month and

year of manufacturing, country of origin (separately for Solar cell

and module), I-V curve, Unique Serial No and Model No of the

Providing, supplying, installing, testing and commissioning of

hydraulic maintenance ladder / mobile hydraulic access platform

suitable for indoor and outdoor maintenance works, having

hydraulically operated vertical lifting mechanism with adequate

working height, robust structural steel/aluminium platform, anti-

skid platform flooring, safety guardrails and toe guards, access

ladder/gate, heavy-duty wheels/castors with suitable

locking/stabilizing arrangement, hydraulic power pack,

electric/battery-operated drive/lifting system, control panel with

operating controls, emergency stop arrangement, overload

protection, emergency lowering arrangement, limit switches and

all other requisite safety devices. The equipment shall be

complete with battery and charger, hydraulic hoses, cylinders,

valves, electrical wiring, connectors, fasteners and all necessary

accessories. The item shall include transportation to site,

loading/unloading, assembly, installation, testing, trial operation,

commissioning and demonstration, including all labour, tools,

tackles, T&P and incidental works, complete in all respects as per

approved drawings, manufacturer's specifications and direction of

Engineer-in-Charge..

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

BILL OF QUANTITY

Sl. No. 2025 Description Unit Qty DSR Rate DSR Amount. NDSR Amount.

Supplying, Installation, Testing & Commissioning of Modular type

Variable Refrigerant Flow/Variable Refrigerant Volume air cooled

Outdoor units suitable for

cooling/heating having 100% hermetically sealed inverter type twin

Rotary/Scroll Compressor(s),minimum two compressors (with

individual separate PCB) for above 14HP modules, microprocessor

based Controller, top discharge type condensing unit(s), with R-410-A

Refrigerant or equivalent, vibration Isolators with suitable foundation

etc. complete as required. To have better efficiency condenser fan

shall be capable to operate at different speed with respect to load.The

unit shall deliver the rated capacity and in confirmation as per IS

18728:2024 and CPWD Specifications and work even at 50°C ambient

temperature without tripping. The system shall be able to deliver

1 31.3 100% of the rated capacity upto 39 °C. The unit shall be suitable to

work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS

compatible. The unit shall be filled with first charge of the refrigerant

and ready for use as required. The condenser should be coated with a

hydrophilic film to prevent water accumulation on the surface of the

heat exchanger, enhance water dispersion, and reduce the risk of

degradation, thereby improving overall performance and durability.

The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall

be as per Energy Conservation and Sustainable Building Code

(ECSBC) 2024 as below and complete as per CPWD specification,

connections, inter connections etc. as required. (For capacity <40 kWr

ISEER 7.4, Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER

7.6 for Super ECSBC Building)

For Cooling or Heating or Both

i) 31.3.2 12 HP Cooling Only TOP Discharge ODU Nos. 2 273132 546264

ii) 31.3.3 16 HP Cooling Only TOP Discharge ODU Nos. 4 346544 1386176

iii) NDSR ODU Connecting Kit Nos. 6 7118 42708

Supply, installation, testing & commissioning of factory fabricated

Double Skin Floor Mounted VRV DX AHU (AHRI /

Eurovent Certified) fabricated out of extruded aluminium section

with 0.8 mm pre-plasticized / pre-coated Galvanised steel sheet

outside & 0.8 mm plain Galvanised steel sheet inside with backward

curved plug fan, fan section and fan motor TEFC type suitable for

operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4/6/8 Row dx

type cooling coil made of Aluminium finned Copper tube with coil

section, polished stainless steel drain pan made out of 20 G sheet

duly insulated. The AHU panels shall be insulated with 23mm thick &

36 Kg/m³ density PU foam & shall have thermal break. The motor &

2 blower assembly shall be mounted on Aluminium extruded

section only. These AHUs shall have air inlet / outlet connection

made of 20 G GI sheet. The complete AHU shall conform to

specication & face velocity across cooling coil shall be decided

as per site. Static pressure given below is for guideline & actual

to be calculated. AHU DX coils shall be in tune with the requirement

of VRV Outdoor Unit capacity and no divisions shall be made in cross

sectional area of the coil. If multiple ins and outs of refrigerant pipe

are required then coils shall be grouped into required rows keeping

the cross sectional area of the coil constant. The capacity of Air-

handlers shall be as follows:

i) NDSR 26 TR 7000 CFM 6RD/8RD,FM AHU Nos. 2 972840 1945680

ii) NDSR AHU Kit for AHU Nos. 2 43982 87964

iii) NDSR Corded Remote Controller for AHU Nos. 2 4065 8130

Supply, installation, testing & commissioning of following Wall

Mounted Type Indoor unit equipped with cordless remote, synthetic

washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, insulation, necessary

supports etc, suitable for operation on 230 V ± 10%, 50 Hz single

phase AC supply, complete as required. The unit shall have automatic

force shut down provision Incase of fire. All indoor Units should

have force shut option to connect with fire alarm adaptor, so

that the unit automatically stops in case or fire. The cooling capacity

of indoor unit will be at air inlet conditions of 27 degree C DBT and 19

i) NDSR Nominal Capacity 2.56 TR Nos. 1 67435 67435

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

BILL OF QUANTITY

Sl. No. 2025 Description Unit Qty DSR Rate DSR Amount. NDSR Amount.

Supplying, Installation, Testing and Commissioning of following

minimum capacity 4 way Cassette Type Indoor ceiling mounted unit

equipped with synthetic washable media pre-filter, fan section with

low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet,

drain pump, grill, necessary supports, vibration Isolation,

Corded remote control etc., suitable for operation on single phase 230

V ± 10%, 50Hz AC supply, complete, as required. The Indoor units

must shut down upon receiving a singal from the BMS System/Fire

Singnals. The system shall be capable to adjust air flow as per room

requirement in auto mode. The cooling capacity of indoor unit will be

at air inlet conditions of 27 0C DB and 19 0C WB temperature.

(Make will be same as of Outdoor)

i) 31.4.4 Nominal Capacity 1.6 TR Nos. 1 39464 39464

ii) 31.4.5 Nominal Capacity 2.0 TR Nos. 3 39734 119202

Supply, installation, testing & commissioning of following minimum

capacity Celing Mounted VRV Duct Type Indoor ceiling mounted

unit equipped with cordless remote , synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced

blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, drain pan, insulation,

necessary supports, vibration isolation etc, suitable for operation on

± 10%, 50 Hz single phase AC supply, complete as required. The unit

shall have automatic force shut down provision in case of fire. All

indoor Units should have force shut option to connect with fire alarm

adaptor, so that the unit automatically stops in case or fire. The

cooling capacity of indoor unit will be at air inlet conditions of 27

degree C DBT and 19 degree C WBT.

i) NDSR Nominal Capacity 2.56 TR Nos. 4 90042 360168

Supplying, Installation, Testing and Commissioning of Y/T/Multi

31.13 Joints. Joints shall be of same Original Equipment Manufacturer (OEM)

make as of ODUs and IDUs

31.13.1 Indoor Units Nos. 9 4535 40815

31.13.2 Outdoor Multi Joint Nos. 6 8098 48588

Supplying, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger

6 31.14 supports, jointing/brazing including accessories, insulated with XPLE

Class-O tubular insulation/with Class-O closed cell elastometric nitrile

rubber tubular sleeves sections of 19 mm thick insulation as given

below for Suction and Liquid lines, all accessories as per specifications

etc. as required :

i. 31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62mm Mtr 40 1286 51440

ii. 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2mm Mtr 38 1157 43966

iii. 31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2mm Mtr 12 904 10848

iv. 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Mtr 42 739 31038

v. 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2mm Mtr 39 615 23985

vi. 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 45 487 21915

vii. 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 68 346 23528

viii. 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Mtr 6 256 1536

Supplying and laying of Signal cable 2 core 1.5sq mm shielded with

following specifications:

7 NDSR 18 AWG, Conductor Material- Tinned Copper,Jacket (Insulation) Mtr 185 210 38850

,Material- Poly-Vinyl Chloride (PVC),UL Voltage Rating- 300 V RMS,

etc as required.

8 NDSR Gas Charging for the entire circuit(R410A) Kg 80 1320 105600

Providing & fixing of PVC Drain Pipe complete with fittings,

supports as per specifications and duly insulated with 9 mm

9 thickness Class O of closed cell nitrile rubber/XLPE as per direction of

Engineer-in-charge & specifications enclosed as reqd.

i) NDSR 50 mm dia Mtr 12 365 4380

ii) NDSR 32 mm dia Mtr 62 265 16430

iii) NDSR 25 mm dia Mtr 8 165 1320

Supplying, installation, balancing and commissioning of fabricated at

site GSS sheet metal rectangular/round ducting complete with

neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

10 30.12.2 supports, bends, transitions, reducers, end caps, collars etc as

required complete in all respect in confirmation with IS : 655 and

approved drawings and specifications of following sheet thickness

Thickness 0.63 mm sheet

Thickness 0.80 mm sheet

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

BILL OF QUANTITY

Sl. No. 2025 Description Unit Qty DSR Rate DSR Amount. NDSR Amount.

Supply and application of acoustic insulation for the initial portion of

supply air ducting. Material of construction shall be cross linked

polyolefin foam. Elastomeric nitrile rubber material with open cell

11 structure without any fibre material. density of same shall be within

140-180 Kg/m3. Thickness of material shall be minimum 13mm. The

insulation material shall be stuck to the cleaned duct surface by

i) NDSR Sqmtr 146 825 120450

Supply of thermal insulation with Class 'O' with Aluminium foil.

Should properly cover with all supply air ducts collars except the area

of accoustic insulation. Material of construction shall be cross linked

polyolefin, polyethelene form material with closed cell structure

andwith factory applied reinforced aluminium foil.

12 Densiy shall be 45-50 Kg/m3. Thickness of the material shall be

10mm. The insulation material shall be stick to the cleaned duct

surface by cold adhesive. The material and installation methedology

should be in accordance with the specifications and

i) NDSR Sqmtr 62 1080 66960

Supplying, Fixing, installation, testing and commissioning of powder

coated extruded aluminium Supply Air Grills with aluminium volume

13 30.15 control dampers in confirmation to SMACNA/IS and as per Sqmtr 14 9623 134722

specifications complete etc. as required.

Supplying & fixing of powder coated extruded aluminium Return Air

13A Grills with louvers but without volume control dampers complete in 14 6285 87990

confirmation to SMACNA/IS and as per specifications complete etc. as

14 NDSR Installation of Mouth piece canvas connection Nos. 8 8800 70400

Installation, testing and commissioning of expansion kit for DX type

15 NDSR AHU. (Actual quantity to be work out by HVAC contrcator as per coil Nos. 2 2750 5500

Installation, testing and commissioning of communication kit for DX

16 NDSR type AHU. (Actual quantity to be work out by HVAC contrcator as per Nos. 2 2750 5500

coil selection)

Supply Installation Testing and Commissioning of Inline Fan for Toilet

Supplying, Installation, testing and commissioning of Propeller Fan

Supplying, Fixing, testing and commissioning of fire dampers of

minimum 90 minutes fire rated in supply air duct/main branch and

return air path as and where

required of required sizes i/c control wiring, the damper shall be

motorized and spring return so as to close the damper in the event of

19 30.20 power failure automatically and open the same in case of power being

restored. The spring return action shall be inbuilt mechanism and not

externally mounted. The damper shall also be closed in the event of

fire signal and, in confirmation to IS and as per specifications

complete etc. as required.

iii) NDSR UL listed Fusible Link Nos. 2 1050 2100

Supply Installation Testing and Commissioning of VRF Central

Providing and fixing Fire retardant non porous double layer flexible

connection between each Indoor unit and duct.

22 NDSR Providing & Fixing MS Stand for VRF Outdoor Units Nos. 4 10500 42000

Total Cost = 2917881 3226805

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

1.00 WIRING SYSTEM (POINT WIRING)

NOTE : ALL WIRES SHALL BE FRLS ONLY

The following light points are done with 2R x 2.5Sqmm ( phase and neutral) +

1 x 1.5Sqmm (earth) stranded Cu PVC insulated FRLS flexible wires of

650/1100V grade. The cost to include - 16 SWG MS conduits, inspection

bends, collars, coupler, saddles, clamps, check nut, junction boxes with cover

plates, FRLS wires, terminations, wire connectors, angle holders, flexible pipe,

GI back boxes, earthing, one way/ two way polycarbonate modular switch,

frames, cover plates plates etc inclusive of all accessories in surface/ concealed

manner as required for final installation of light fixtures.

Same as above considering below.Primary light point controlled by 1Nos one

1 NDSR way 6A switch (from switch board to first light point - cost of switch & board NOS 40 1125 45000

included). Avg. length- 6mtr.

Same as above considering below.Secondary light point looped from above and

subsequent loops . Avg. length- 5mtr.

Same as above considering below.Primary light point controlled by 2Nos two

3 NDSR way 6A switch (from switch board to first light point - cost of switch & board NOS 10 3560 35600

included). Avg. length- 20mtr.

Same as above considering below.Secondary light point looped from above and

subsequent loops. Avg. length- 8mtr.

Same as above considering below.Primary light point controlled by MCB

directly from DB. Avg. length-20mtr.

Same as above considering below.Secondary light point looped from above and

subsequent loops. Avg. length- 6mtr.

Same as above considering below. Primary light point controlled by fuse from

7 NDSR Dimmer panel with 2R x 2.5Sqmm stranded Cu PVC insulated FRLS flexible NOS 12 3150 37800

wire. Avg. length- 20mtr.

Same as above considering below. Secondary light point looped from above

8 NDSR and subsequent loops with 2R x 2.5Sqmm stranded Cu PVC insulated FRLS NOS 30 990 29700

flexible wire. Avg. length-6mtr.

The following light points are done with 2R x 2.5 Sqmm for primary and 2R x

1.5 Sqmm for secondary HMS FRLS PVC conduits, inspection bends, collars,

coupler, saddles, clamps, check nut, junction boxes with cover plates, FRLS

wires, terminations, wire connectors, angle holders, flexible pipe, GI back

boxes, earthing etc inclusive of all accessories in surface/ concealed manner as

required for final installation of step light.

Same as above considering below. Primary step light point with 2R x 2.5

Sqmm stranded Cu PVC insulated FRLS flexible wire. Avg. length-20mtr.

Same as above considering below. Secondary step light point looped from

2 NDSR above and subsequent loops with 2R x 1.5 Sqmm stranded Cu PVC insulated NOS 160 510 81600

FRLS flexible wire. Avg. length-2.5mtr.

The following power points are done with 2R x 2.5Sqmm (phase and neutral) +

1x1.5Sqmm (earth) stranded Cu PVC insulated FRLS flexible wires of

650/1100V grade. The cost to include- 16 SWG MS conduits, inspection bends,

collar, coupler, saddles, clamps, check nut, junction boxes with cover plates,

FRLS wires, terminations, flexible pipe, GI back boxes, earthing, polycarbonate

switch, shuttered socket, frame, cover plates (of colours white/grey/black) as

per drawings and instructions of the site incharge inclusive of all accessories in

surface/ concealed manner as required for final installation of power point.

Same as above considering below. Primary power point with 1Nos 230V 6A, 3-

1 NDSR pin socket outlet controlled by 1Nos 6A switch located on switch board. Avg. NOS 20 2900 58000

Same as above considering below. Secondary power point looped from above

2 NDSR and subsequent loops with 1Nos 230V 6A, 3-pin socket outlet controlled by NOS 40 1125 45000

1Nos 6A switch located on switch board. Avg. length- 5mtr.

Same as above considering below. Primary power point with 2Nos 230V 6A, 3-

3 NDSR pin socket outlet controlled by 2Nos 6A switch located on switch board. Avg. NOS 20 2925 58500

Same as above considering below. Secondary power point looped from above

4 NDSR and subsequent loops with 2Nos 230V 6A, 3-pin socket outlet controlled by NOS 40 1175 47000

2Nos 6A switch located on switch board. Avg. length- 5mtr.

Same as above considering below. Primary power point with 3Nos 230V 6A, 3-

5 NDSR pin socket outlet controlled by 1Nos 6A switch located on switch board. Avg. NOS 20 3075 61500

Same as above considering below. Secondary power point looped from above

6 NDSR and subsequent loops with 3Nos 230V 6A, 3-pin socket outlet controlled by NOS 20 1250 25000

1Nos 6A switch located on switch board. Avg. length- 5mtr.

Same as above considering below. Secondary power point looped from above

7 NDSR and subsequent loops with 5Nos 230V 6A, 3-pin socket outlet controlled by NOS 20 1450 29000

1Nos 10A switch located on switch board. Avg. length- 5mtr.

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

The following power points are done with 2R x 4Sqmm (phase and neutral) +

1x2.5Sqmm (earth) stranded Cu PVC insulated FRLS flexible wires of

650/1100V grade. The cost to include- 16 SWG MS conduit, inspection bends,

collar, coupler, saddles, clamps, check nut, junction boxes with cover plates,

FRLS wires, terminations, flexible pipe, GI back boxes, earthing, polycarbonate

switch, shuttered socket, frame, cover plates (of colours white/grey/black) as

per drawings and instructions of the site incharge inclusive of all accessories in

surface/ concealed manner as required for final installation of power point.

Same as above considering below. Primary power point with 1Nos 230V 6/16A,

1 NDSR 3-pin socket outlet controlled by 1Nos 16A switch located on switch board. NOS 20 3725 74500

Avg. length- 15mtr.

Same as above considering below. Secondary power point looped from above

2 NDSR and subsequent loops with 1Nos 230V 6/16A, 3-pin socket outlet controlled by NOS 30 2115 63450

1Nos 16A switch located on switch board. Avg. length- 8mtr.

Same as above considering below. Primary power point with 2Nos 230V 6/16A,

3 NDSR 3-pin socket outlet controlled by 2Nos 16A switch located on switch board. NOS 20 3725 74500

Avg. length- 15mtr.

Same as above considering below. Secondary power point looped from above

4 NDSR and subsequent loops with 2Nos 230V 6/16A, 3-pin socket outlet controlled by NOS 30 2145 64350

2Nos 16A switch located on switch board. Avg. length- 8mtr.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

DSR sq.mm FRLS PVC insulated copper conductor single core cable in surface /

5 2025 recessed medium class PVC conduit, with modular switch, modular plate, Nos. 50.00 1704.00 85,200.00

1.10.3 suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required. Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call

DSR bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC

6 2025 insulated copper conductor single core cable in surface/ recessed PVC conduit, Nos. 100.00 1246.00 1,24,600.00

1.54.3 and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor

single core cable etc. as required. Group C

DSR Supplying & Fixing suitable size GI Box with moduler plate & cover infront on

7 2025 surface or in recess including providing & fixing 3pin 5/6A moduler socket Each 40.00 545.00 21,800.00

1.31 outlet and 5/6 A moduler switch, connections etc as required

DSR Supplying & Fixing suitable size GI Box with moduler plate & cover infront on

8 2025 surface or in recess including providing & fixing 6pin 5/6A & 15/16A moduler Each 40.00 659.00 26,360.00

1.32 socket outlet and 15/16 A moduler switch, connections etc as required

2.00 CIRCUIT WIRING - MAINS & SUB MAINS

Providing and drawing mains and sub-mains of the following sizes of stranded

A Cu PVC insulated FRLS flexible wires of 650/1100V grade in suitable size 16

SWG MS conduit,with all necessary accessories in surface/ concealed manner.

DSR Same as above considering below. 2Rx16Sqmm +1Rx6Sqmm stranded Cu PVC

1.7.6 insulated FRLS flexible wires in suitable size 16 SWG MS conduit.

DSR Same as above considering below. 2Rx10Sqmm +1Rx6Sqmm stranded Cu PVC

1.7.5 insulated FRLS flexible wires in suitable size 16 SWG MS conduit.

Same as above considering below. 2Rx6Sqmm + 1Rx4Sqmm stranded Cu PVC

insulated FRLS flexible wires in suitable size 16 SWG MS conduit.

Same as above considering below. 2Rx4Sqmm + 1Rx2.5Sqmm stranded Cu

PVC insulated FRLS flexible wires in suitable size 16 SWG MS conduit.

Same as above considering below. 2Rx2.5Sq.mm + 1Rx1.5 Sq.mm stranded

Cu PVC insulated FRLS flexible wires in suitable size 16 SWG MS conduit. For

urinal sensor, DB to dimmer panel, DB to switchboard, switchboard to

switchboard, switchboard to light point.

Same as above considering below. 4Rx6Sqmm + 2Rx4Sqmm stranded Cu PVC

insulated FRLS flexible wires in suitable size 16 SWG MS conduit.

DSR Same as above considering below. 4Rx10Sqmm + 2Rx6Sqmm stranded Cu

1.7.10 PVC insulated FRLS flexible wires in suitable size 16 SWG MS conduit.

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single

core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes

of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq.

Supplying and fixing of following sizes of medium class PVC conduit along with

B 1.21 accessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required.

1 PVC CONDUIT - 32MM DIA MTR 100 209 20900

2 PVC CONDUIT - 25MM DIA MTR 1000 168 168000

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

3 PVC CONDUIT - 20MM DIA MTR 150 151 22650

Supplying and fixing of following sizes of steel conduit along with accessories in

C 1.20 surface/recess including painting in case of surface conduit, or cutting the wall

and making good the same in case of recessed conduit as required.

1 MS CONDUIT - 25MM DIA MTR 200 289 57800

2 MS CONDUIT - 20MM DIA MTR 50 254 12700

Supplying and fixing metal box of following sizes (nominal size) on surface or

D in recess with suitable size of phenolic laminated sheet cover in front including

painting etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular

E 1.24 plate & switch box including connections but excluding modular plate etc. as

4 1.24.4 3 pin 5/6 A socket outlet Nos 40 136 5440

5 1.24.5 6 pin 15/16 A socket outlet Nos 40 219 8760

6 1.24.6 Telephone socket outlet Nos 10 168 1680

Supplying and fixing following size/ modules, GI box along with modular base

& cover plate for modular switches in recess etc. as required.

3.00 L.V.CABLES, GI RACEWAY & TRAYS

Providing, laying, testing and commissioning of 1100V grade aluminium/

copper stranded conductor, PVC/ XLPE insulated, PVC sheathed, steel wire/

strip armoured / unarmoured cable for mains and sub mains as per

specifications and drawings. The cables shall be laid in concrete trenches or

A buried directly underground or on wall or on cable trays complete with

dressing, saddling, cable tags, cable tie, clamps etc. as required for proper

installation. The concrete trenches will be measured separate. The cost of the

cable trays or ladders, excavation and back filling of trenches will be measured

1 NDSR 3.5C X 240SQMM A2XFY CABLE MTR 10 2050 20500

2 NDSR 3.5C X185SQMM A2XFY CABLE MTR 50 1650 82500

3 NDSR 3.5C X 95SQMM A2XFY CABLE MTR 50 980 49000

4 NDSR 3.5C X 50SQMM A2XFY CABLE MTR 10 590 5900

5 NDSR 3.5C X 35SQMM A2XFY CABLE MTR 10 510 5100

6 NDSR 3.5C X 25SQMM A2XFY CABLE MTR 10 470 4700

7 NDSR 4C X 16SQMM 2XFY CABLE MTR 150 1480 222000

8 NDSR 4C X 10SQMM 2XFY CABLE MTR 150 970 145500

9 NDSR 4C X 6SQMM 2XWY CABLE MTR 150 510 76500

10 NDSR 4C X 4SQMM 2XWY CABLE MTR 50 410 20500

11 NDSR 3C X 10SQMM 2XFY CABLE MTR 50 780 39000

12 NDSR 3C X 6SQMM 2XWY CABLE MTR 50 505 25250

13 NDSR 3C X 4SQMM 2XWY CABLE MTR 200 385 77000

14 NDSR 3C X 2.5SQMM 2XWY CABLE MTR 50 280 14000

Same as above considering below 2C x 4 Sqmm double insulated Cu. flexible

cable (for LED strip first Point including 16 SWG MS conduit & Accessories

(from driver to first point on strip/cove/profile/signage light as per direction of

Engineer Incharge )

Same as above considering below 2C x 2.5 Sqmm double insulated Cu. flexible

cable including 16 SWG MS conduit & Accessories ( from first point to second

point on strip/cove/profile/signage light and sub-sequent loop as per direction

of Engineer Incharge )

17 NDSR 1C X 16SQMM CU FLEX CABLE MTR 20 442 8840

18 NDSR 1C X 10SQMM CU FLEX CABLE MTR 20 290 5800

19 NDSR 1C X 6SQMM CU FLEX CABLE MTR 20 195 3900

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

20 NDSR 1C X 4SQMM CU FLEX CABLE MTR 20 175 3500

Supplying and making end termination with brass compression gland and

C 11.1 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as required.

1 11.1.29 3.5C X 240SQMM A2XFY CABLE NOS 2 1160 2320

2 11.1.27 3.5C X 185SQMM A2XFY CABLE NOS 2 1001 2002

3 11.1.24 3.5C X 95SQMM A2XFY CABLE NOS 2 684 1368

4 11.1.22 3.5C X 50 SQMM A2XFY CABLE NOS 2 484 968

5 11.1.21 3.5C X 35 SQMM A2XFY CABLE NOS 2 437 874

6 11.1.34 4C X 25 SQMM A2XFY CABLE NOS 2 373 746

7 11.1.33 4C X 16SQMM A2XFY CABLE NOS 32 366 11712

8 NDSR 4C X 6 SQMM 2XWY CABLE NOS 18 350 6300

9 NDSR 4C X 4 SQMM 2XWY CABLE NOS 4 340 1360

10 NDSR 3C X 4 SQMM 2XWY CABLE NOS 4 340 1360

11 NDSR 3C X 2.5 SQMM 2XWY CABLE NOS 4 330 1320

12 NDSR 2C X 4SQMM DOUBLE INSULATED CU FLEX CABLE NOS 40 330 13200

13 NDSR 2C X 2.5SQMM DOUBLE INSULATED CU FLEX CABLE NOS 40 325 13000

14 NDSR 1C X 16SQMM CU FLEX CABLE NOS 18 500 9000

15 NDSR 1C X 10SQMM CU FLEX CABLE NOS 2 450 900

16 NDSR 1C X 6SQMM CU FLEX CABLE NOS 2 380 760

17 NDSR 1C X 4SQMM CU FLEX CABLE NOS 2 290 580

Supplying and installing following size of perforated Hot Dipped Galvanised

Iron cable tray (Galvanisation thickness not less than 50 microns) with

E DSR 4.6 perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with two numbers GI Suspenders i/c

base of suitable size GI angle, GI bolts & nuts, fastner etc as required.

1 4.6.6 450 mm width X 50 mm depth X 2.0 mm thickness MTR 40 1439 57560

2 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness MTR 30 1062 31860

3 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness MTR 70 803 56210

Supply & installation of wall/ceiling mounted GI raceway 1.6mm thick with

openable cover. The rate shall include all accessories required for wall

F mounting, floor run, ceiling hung etc. with all neccessary MS/GI supports, RCC

fastners, threaded rod, MS/GI bolts - nuts - washers etc. Cost of MS supports

1 NDSR GI RACEWAY - 200 X 50MM 1.6MM THK WITH COVER MTR 60 2150 129000

2 NDSR GI RACEWAY - 100 X 50MM 1.6MM THK WITH COVER MTR 25 1300 32500

3 NDSR GI RACEWAY- 150 X 50MM 1.6MM THK WITH COVER MTR 60 1780 106800

4 NDSR GI RACEWAY- 50 X 50MM 1.6MM THK WITH COVER MTR 50 850 42500

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

Supply & installation of wall/ceiling mounted GI junction boxes with top

openable cover's

1 NDSR GI JUNCTION BOX -225 X 225 X 75 mm NOS 4 940 3760

2 NDSR GI JUNCTION BOX - 175 X 175 X 75 mm NOS 4 775 3100

3 NDSR GI JUNCTION BOX- 75 X 75 X 75 mm NOS 4 460 1840

Supply and laying of MS angle (MS sections of all types and sizes with welding

and all types of fastened arrangements etc.) as per site manager's approval.

4.00 LT PANELS AND DISTRIBUTION BOARDS

Supply, installation, testing and commissioning of M.V.Distribution Boards

suitable for 415V, 3 ph, 4 wire, 50Hz distribution system. The panel shall be

free standing, floor mounting, sheet metal enclosed, flush front with aluminium

busbars, separate earth bus shall be provided throughout the length of the

panel. The incoming and the outgoing feeder breakers, switch fuse units,

change over switches, indicating lamps, meters etc. shall be accommodated in

a modular multi tier arrangement. A minimum of 400mm clearance shall be

given from the floor level to the bottom most termination point. The painting

A shall be done in conformity with IS code. Adequate size cable alley shall be

provided all round the panel and at the back for easy bending and

terminations. The outgoing feeders inside the panel shall be connected through

solid busbars. Flexible cable links are not acceptable. Busbars shall be provided

with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels

shall be suitable for cable entry from top. The copper earth strip of minimum

25mm x 3mm shall run throught out the length of the top / bottom of the

panel ( All MCCB'c are Thermal magnetic released MCCB'S), All the MCCB,s

should have rotary handle (RHOM)

The construction of the panel shall comply to latest standards of IEC 60439.

b The Panel shall be fully as per the requirement of Electrical Inspectorate/ CEIG

c Auxilliary contactor to be provided along with auto-manual switch .

d All doors to have double rubber gasket with shutter assembly & door seating

e Any panel if more than 2.5 mts width should be made in parts each part not

exceeding 2.5mts

All UPS outgoing panels shall have neutral busbars double the size of phase.

g Breaker terminal connections from the dropper bus shall be through only

Al/Cu. bus to be used.

h The Bus bars and connectors should have extruded insulation

Base frame shall be with each panel. The size will be equal to each section.

j Bi-metallic tape / washers to be used where ever copper & Aluminium are

k Auto-Manual switch shall be provided for all motorised breakers.

l All the DB's should be installed with suitable cable end boxes or suitable

m Specification proposed only for Tender purpose. The contractor has to submit

final BOM for our approval as per SLD.

Contractor should refer drawings and site conditions before quoting the panels.

o Panel vendor should submit actual BOM as per SLD. All the panels shall be as

p IP-54 for indoor type and IP-65 for outdoor type

q Prior ordering any items contractor has to take approval from PVR Site/Project

Basic description same as above

MAIN LT PANEL ( Refer SLD ) (Indoor type)

Incomer-1 & 2:-

500A FP MCCB, 36kA microprocessor based O/L, S/C and E/F release-2 Set

with mechanical and eletcrical interlock - 2 Set

Metering & Protection:- (each incomer)

Breaker ON / OFF / TRIP indicating lamps with suitable rating control SP MCB -

RYB phase indicating lamps with suitable rating control SP MCB - 1Set

MFM with RS-485 port- 1Set (parameters V, I, Hz, KWH, PF, KW, KVAR, max.

CT 630/5A 15 VA, CL.1- 3 Nos

630A TPN Al busbar (36KA) insulated with colour coded heat shrinkable

sleeves. Current density 0.8A/ Sqmm.

100A FP MCCB, 25kA thermal magnetic based O/L, S/C release- 2Set

63A FP MCB, 10kA-10Nos

40A FP MCB, 10kA-13Nos

32A FP MCB, 10kA-10Nos

32A DP MCB, 10kA-4Nos

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

Basic description same as above

2 NDSR UPS OUTPUT PANEL (30KVA) (Indoor type) SET 1 155900 155900

63A FP Changeover switch- 1Set

63A FP MCCB,25kA thermal magnetic based O/L, S/C release - 1Set

Metering & Protection:-

Breaker ON / OFF / TRIP indicating lamps with suitable rating control SP MCB -

RYB phase indicating lamps with suitable rating control SP MCB - 1Set

Digital voltmeter- 1Set

100A TP+2N Cu busbar (25KA) insulated with colour coded heat shrinkable

sleeves. Current density 1.4A/ Sqmm.

63A FP MCB 10kA- 4Nos

DOL starter for 3.7kW motor:- 6.3-10A TP MPCB, 50kA, 25A TP contactor

with 2NO and 2NC conatcts, 0-25A ammeter with CTs, trip indicating lamp

with control SP MCB, start and stop push button illuminated type with remote

control start, stop arrangement, Auto/ manual/ off selector switch. Starter

shall have fire integration (potential free contacts) provision and power

provision for motorised fire damper.

DOL starter for 2.2kW motor:- 4-6.3A TP MPCB, 50kA, 22A TP contactor

with 2NO and 2NC conatcts, 0-25A ammeter with CTs, trip indicating lamp

with control SP MCB, start and stop push button illuminated type with remote

control start, stop arrangement, Auto/ manual/ off selector switch. Starter

shall have fire integration (potential free contacts) provision and power

provision for motorised fire damper.

DOL starter for 5.5kW motor:-9-13A TP MPCB, 50kA, 32A TP contactor with

2NO and 2NC conatcts, 0-25A ammeter with CTs, trip indicating lamp with

control SP MCB, start and stop push button illuminated type with remote

control start, stop arrangement, Auto/ manual/ off selector switch.

For all starters, follow type-2 co-ordination chart of OEM.

Supply, installation, testing and commissioning of the following

Distribution Boards made of 18 gauge powder coated MS sheet steel,

Cu busbar, wall mounted/fully recessed in wall, indoor industrial type,

with dust proof, hinged and lockable doors, double door design,

B NDSR complete with inter connecting wires from incomer MCB to each RCCB

along with earthing terminal. The top and bottom of the box shall have

adequate number of knockouts suitable to receive the conduits and

cables. All MCB to be 10kA. All MCBs are C curve except UPS DBs. IP-

Basic description same as above

LPDB-A-1, 2 ( Audi lighting and power DB)

12 way TPN DB per phase isolation

40A FP MCB, 10kA- 1Nos

40A DP RCCB, 100mA- 3Nos with 40A DP 2NO contactor-1Nos

10-32A SP MCB, 10kA- 28Nos

Basic description same as above

ELDB-A-1,2 ( Audi emergency lighting DB)

25A DP RCBO, 30mA- 1Nos

10-20A SP MCB, 10kA- 8Nos

Basic description same as above UPSDB-A-1, 2

( Sound and projection equipment DB)

Flexi DB 4Rx14module

63A FP MCB, 10kA- 1Nos

40A DP RCCB, 100mA- 3Nos

10-32A SP MCB, 10kA D curve- 10Nos

40A SP MCB, 10kA D curve- 2Nos

32A FP MCB, 10kA D curve- 2Nos

Basic description same as above

LDB-1,2 ( Lobby lighting DB)

12 way TPN DB per phase isolation

40A FP MCB, 10kA- 1Nos

40A DP RCCB, 30mA- 3Nos

10A SP MCB, 10kA- 24Nos

Basic description same as above

PDB-2 ( Lobby power DB)

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

12 way TPN DB per phase isolation

40A FP MCB, 10kA- 1Nos

40A DP RCCB, 100mA- 3Nos

10-32A SP MCB, 10kA- 30Nos

Basic description same as above

ELDB-1 ( Lobby emergency lighting DB)

25A DP RCBO, 30mA- 1Nos

10A SP MCB, 10kA- 8Nos

Basic description same as above

32A DP RCBO, 100mA- 1Nos

10-32A SP MCB, 10kA D curve- 16Nos

Basic description same as above

COLD DB ( Concession equipment DB)

Flexi DB 4R14 Module

100A FP MCB, 10kA- 1Nos

63A DP RCCB, 100mA- 3Nos

10-32A SP MCB, 10kA- 10 Nos

40A SP MCB , 2 Nos

32 FP , MCB, 3 nos

Supply & installation 3-phase , 32A , 5 pin industrial socket and plug top

controlled by 32A, FP MCB in a metallic enclosure. IP-44

Supply & installation 1-phase , 32A , 3 pin industrial socket and plug top

controlled by 32A, DP MCB in a metallic enclosure. IP-44

Supply & installation 1-phase, 16A 3 pin industrial socket and plug top

controlled by 16A, DP MCB in a metallic enclosure. IP-44

Supply & installation 1-phase, 25A 3 pin industrial socket and plug top

controlled by 25A, DP MCB in a metallic enclosure. IP-44

Supply & installation 1-phase, 40A 3 pin industrial socket and plug top

controlled by 40A, DP MCB in a metallic enclosure. IP-44

Supply & installation 1-phase, 20A 3 pin metal clad socket and plug top

controlled by 20A, DP MCB in a metallic enclosure ( For Hi-wall unit)

Supply & installation 3-phase 100A, FP MCCB, 25kA thermal magnetic O/L, S/C

7 NDSR release as an Isolator switch in a metallic enclosure with cable entry provision NOS 2 14500 29000

from both top and bottom.

Supply & installation 1-phase 40A/ 63A, DP MCB as an Isolator switch in a

8 NDSR metallic enclosure with cable entry provision from both top and bottom. (For NOS 1 8850 8850

10KVA UPS, IT and audi emergency lighting)

Supply & installation 1-phase 63A, FP MCB as an Isolator switch in a metallic

enclosure with cable entry provision from both top and bottom. (For 30KVA )

Supply & installation 1-phase 32A, DP MCB as an Isolator switch in a metallic

enclosure with cable entry provision from both top and bottom.

Supply, installation, testing and comissioning of 32A DP 2NO contactor in metal

Supply & installation 1-phase 25A/ 32A, TP Isolator as an Isolator switch in a

12 NDSR weatherproof enclosure with cable entry provision from both top and bottom. NOS 1 3850 3850

5.00 EARTHING SYSTEM

Supply, installation, testing & commissioning of 14.35 mm dia and 3 meter

length copper bonded earth rod in 150 mm dia. in an augured hole in ground ,

surrounded by ground enhancement material as per specification. Inspection

chamber shall be of 300 x 300 mm with concrete base CI manhole cover with

A NDSR frame painted with bitumastic paint. 2 Nos. of 50 x 6 mm cross section & 300 NOS 6 19500 117000

mm long copper strip to be clamped with copper claded rod electrode have

sufficient nos ( But not less than 4 Nos.) of 10 mm dia. GI nuts & bolts for

connection to the equipment / interconnection to the other pits to form equi-

potential bonding. ( For UPS, projection equipment and server rack)

Supply,installation,testing & comissioning of GI earth bus bar of size 25 mm x

6 mm x 400 mm (W x B x L) mounted on insulators, in suitable size painted

MS box with acrylic cover. Bus bar should have holes with brass nutbolts of

Supply, installation, testing & comissioning of copper earth bus of size 25 mm

x 6 mm x 250 mm (W x B x L) mounted on insulators, in suitable size painted

MS box with acrylic cover. Bus bar should have holes with brass nutbolts of

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

Supply and fixing of following GI/ Cu wires & tapes on existing tray/ trench/

ground / PVC pipe / walls including all necessary fixing accessories and

effecting connections with riveting / welding etc. as approved by engineer in

charge complete as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for

connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for

connections etc. as required.

Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for

connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing as required.

Supply, laying, connection, testing and commissioning of following sizes of

1.1kV grade single core FR PVC insulated unsheathed industrial flexible cable in

existing laid conduit, raceway, tray. It should include both ends terminal joints

providing tinned copper terminal lugs, single compression nylon cable glands,

insulation tape, effecting terminal connections to the equipment complete as

1 NDSR 1C X 35SQMM CU FLEX CABLE MTR 20 1110 22200

2 NDSR 1C X 16SQMM CU FLEX CABLE MTR 150 462 69300

3 NDSR 1C X 10SQMM CU FLEX WIRE MTR 150 290 43500

4 NDSR 1C X 6SQMM CU FLEX WIRE MTR 250 210 52500

5 NDSR 1C X 4SQMM CU FLEX WIRE MTR 50 175 8750

6.00 LIGHT FIXTURES

1 Providing & Installation of 24-26W LED Tube light fixture . NOS 50 797 39850

Providing, Installation, testing and commissioning of 24W cleaner downlight -

Recessed, Non-adjustable

DSR Providing, Installation, testing and commissioning of recessed mounted 18

8.3.4 watt LED down light fixture with Driver.

Providing Installation, testing and commissioning of 16W LED downlight -

Recessed, Non-adjustable (Dimmable)

Providing, Installation, testing and commissioning of 1meter length LED

6 NDSR Providing & fixing of Led strip light Rmt. 200 650 130000

7 NDSR Providing, Installation, testing and commissioning of LED exit signage boxes NOS 8 1300 10400

Receiving, fixing in position effecting proper connections testing and

commissioning of Dimmer Panel complete as required with all accessories.

7.00 COMMUNICATION DATA AND VOICE

Supplying and drawing 20 Pair 0.5 mm dia FRLS PVC insulated annealed

1 copper conductor, unarmored telephone cable in the existing surface/ recessed MTR 50 344 17200

steel/ PVC Conduit etc. complete as required.

2 NDSR TAG Box suitable for 100pair armoured cu tel cable with crown NOS 1 9500 9500

3 NDSR TAG Box suitable for 20pair armoured cu tel cable with crown SET 1 2550 2550

Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated

DSR annealed copper

1.18.2 conductor, unarmored telephone cable in the existing surface/ recessed steel/

PVC conduit as required. 2 Pair

5 2025 Supply and installation of 4 Pair CAT 6A UTP cable in existing conduit MTR 2500 74 185000

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected

with PVC sheath in the existing surface/ recessed steel/ PVC conduit as

Supply, installation, testing and commissioning of clip on telephone type

7 NDSR outlet mounted on a GI outlet box with front plate and all necessary NOS 10 650 6500

accessories complete as required including the termination of wires.(RJ11)

Supply, installation, testing and commissioning of clip on Data outlet

8 NDSR mounted on a GI outlet box with front plate and all necessary accessories NOS 40 750 30000

complete as required including the termination of wires.(RJ45)

Supply and ,installation floor mounted Ega box 250 mm by 250 mm for

housing 2Nos 6A socket with 1Nos 6A switch on UPS and 1Nos 6A socket with

1Nos 6A switch on Raw power and 2Nos data/voice boxes complete as

required. ( For QR code scanner)

Supply and ,installation floor mounted Ega box 100 mm by 100 mm for

housing 6/16A switch and socket complete as required. (For DFMD)

8.00 SAFETY / MISCELLENIOUS ITEMS

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

SR. 2025 DSR NDSR DSR NDSR

Description UNIT QTY

NO. E&M RATE Rate AMOUNT AMOUNT

Providing and fixing in position the best quality 415 kV danger boards of

1 NDSR approved shape and size as specified by the local electrical authorities written NOS 2 1350 2700

in English and local language.

2 NDSR Supply and fixing of 4.5 litres capacity CO2 fire extinguisher as required. NOS 10 5600 56000

3 NDSR Supply and fixing of 4.5 litres capacity ABC fire extinguisher as required. NOS 10 2950 29500

Providing and fixing in position approved shock treatment chart written in

4 NDSR English and Local Language. The chart shall be framed in Teakwood and NOS 2 3800 7600

covered with glass.

Supply and fixing in position fire buckets duly signed and fixed on an angle

iron frame as per the requirements of local Electricity authorities.

6 NDSR First Aid Box 300x300 with all necessory Kit NOS 1 1500 1500

GRAND TOTAL 16,14,270 53,37,900

GRAND TOTAL 16,14,270 53,37,900

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

Non DSR NON DSR

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate DSR Amount.

Supplying Installation, Testing and Commissioning of Circular 50W

RGBW Facade Projector luminaire for facade lighting with Pressure

Die-cast aluminium housing, powder-coated finish, with inbuilt

driver of following wattage as given below. The luminaire bracket

shall be made of cold-rolled steel & shall be so designed that the

luminaire can be tilted to ±90°, the scale shall be provided for

rotation degrees. The luminaire shall be IP66 protection also

having silicon gasket between optical cover & LED chamber to

ensure proper IP66 protection and impact resistance of IK 07.

CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under

voltage, over voltage protection, driver inbuilt surge protection of

4KV and external surge protection (SPD) of 10 KV common

mode/differential mode, Driver Efficiency>85% . There should be

options of beam angles of 30 degree. Luminaire should have

efficacy of minimum 35 lm/W for RGBW for mono colour options.

Luminaire shall be capable of producing dynamic colour changing

light for with 16 million colours by DMX based control. The beam

angle of the fitting shall be narrow as per the requirement.

Luminaire shall be complete with replaceable driver and capable of

operating at line voltage without any separate power supply from

100-270 V AC, 50 Hz with power factor > 0.9. Fixture shall be

suitable to operate at an ambient temperature range of -10°C to

+50°C. Lifetime of complete luminaire(LED ,Driver , Electrical &

control circuitry) shall be at least L70:50000 burning hours at

50°C. Luminaire shall be conforming to BIS: (IS 10322) with dully

R Number marked and shall be complete with all necessary

Supplying Installation, Testing and Commissioning of Circular 40W

RGBW Facade Projector luminaire for facade lighting with Pressure

Die-cast aluminium housing, powder-coated finish, with inbuilt

driver of following wattage as given below. The luminaire bracket

shall be made of cold-rolled steel & shall be so designed that the

luminaire can be tilted to ±90°, the scale shall be provided for

rotation degrees. The luminaire shall be IP66 protection also

having silicon gasket between optical cover & LED chamber to

ensure proper IP66 protection and impact resistance of IK 07.

CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under

voltage, over voltage protection, driver inbuilt surge protection of

4KV and external surge protection (SPD) of 10 KV common

mode/differential mode, Driver Efficiency>85% . There should be

options of beam angles of 30 degree. Luminaire should have

efficacy of minimum 35 lm/W for RGBW for mono colour options.

Luminaire shall be capable of producing dynamic colour changing

light for with 16 million colours by DMX based control. The beam

angle of the fitting shall be narrow as per the requirement.

Luminaire shall be complete with replaceable driver and capable of

operating at line voltage without any separate power supply from

100-270 V AC, 50 Hz with power factor > 0.9. Fixture shall be

suitable to operate at an ambient temperature range of -10°C to

+50°C. Lifetime of complete luminaire(LED ,Driver , Electrical &

control circuitry) shall be at least L70:50000 burning hours at

50°C. Luminaire shall be conforming to BIS: (IS 10322) with dully

R Number marked and shall be complete with all necessary

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

Non DSR NON DSR

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate DSR Amount.

Supplying Installation, Testing and Commissioning of Circular 25W

RGBW Facade Projector luminaire for facade lighting with Pressure

Die-cast aluminium housing, powder-coated finish, with inbuilt

driver of following wattage as given below. The luminaire bracket

shall be made of cold-rolled steel & shall be so designed that the

luminaire can be tilted to ±90°, the scale shall be provided for

rotation degrees. The luminaire shall be IP66 protection also

having silicon gasket between optical cover & LED chamber to

ensure proper IP66 protection and impact resistance of IK 07.

CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under

voltage, over voltage protection, driver inbuilt surge protection of

4KV and external surge protection (SPD) of 10 KV common

mode/differential mode, Driver Efficiency>85% . There should be

options of beam angles of 30 degree. Luminaire should have

efficacy of minimum 35 lm/W for RGBW for mono colour options.

Luminaire shall be capable of producing dynamic colour changing

light for with 16 million colours by DMX based control. The beam

angle of the fitting shall be narrow as per the requirement.

Luminaire shall be complete with replaceable driver and capable of

operating at line voltage without any separate power supply from

100-270 V AC, 50 Hz with power factor > 0.9. Fixture shall be

suitable to operate at an ambient temperature range of -10°C to

+50°C. Lifetime of complete luminaire(LED ,Driver , Electrical &

control circuitry) shall be at least L70:50000 burning hours at

50°C. Luminaire shall be conforming to BIS: (IS 10322) with dully

R Number marked and shall be complete with all necessary

Supplying Installation, Testing and Commissioning of 30W LED

RGBW Wall Washer luminaire for Facade lighting with aluminium

extruded/ Die Cast housing with inbuilt driver of following wattage

as given below. The luminaire bracket shall be made of cold-rolled

steel & shall be so designed that the luminaire can be tilted to

±90°, having the rotation degrees scale shall be provided. The

luminaire shall be IP66 protection also having silicon gasket

between optical cover & LED chamber to ensure proper IP66

protection. CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2,

under voltage, over voltage protection, driver inbuilt surge

protection of 4KV and external surge protection (SPD) of 10 KV

common mode/differential mode, Driver Efficiency>85%. There

should be options of beam angles of 10, asymmetric degree.

Luminaire should have efficacy of minimum 40 lm/W for RGBW

options. Luminaire shall be capable of producing dynamic colour

changing light for with 16 million colours by DMX based control.

The beam angle of the fitting shall be narrow as per the

requirement. Luminaire shall be complete with replaceable driver

and capable of operating at line voltage without any separate

power supply from 24 V DC. Fixture shall be suitable to operate at

an ambient temperature range of --10°C to +50°C and shall have

impact resistance of IK 07. Lifetime of complete luminaire (LED

,Driver , Electrical & control circuitry) shall be at least L70:50000

burning hours at 50°C. Luminaire shall be conforming to BIS (IS

10322) with dully R Number marked and shall be complete with all

necessary accessories required for proper working of fixture

Supplying Installation, Testing and Commissioning of LED RGBW

suitable for exterior use having IP68 rating . Flexible light strip of 5

mtr standard length with 12-15 Watt per meter. Luminaire shall be

capable of producing dynamic colour changing light for with 16

million colours by DMX based control. Minimum System lumens

450 lumens/meter and System Lumen Efficacy > 30lm/w.

Luminaire light beam spread - 100-110°, The Strip should have IP

68 protection and is offered IP 68 rated connectors to join the LED

Strips in continuity. The luminaire must be offered with Aluminium

channel for mounting the strip lights. The product should be

complete with all accessories and Driver. Lifetime of complete

5 19.4 luminaire (LED, Driver, Electrical & control circuitry) shall be at nos 150 9,689.00 14,53,350.00

least L70:50000 burning hours at 50°C. Luminaire shall be

conforming to BIS (IS 10322) with dully R Number marked.

Luminaire shall be complete with replaceable driver and capable of

operating at line voltage without any separate power supply from

24 V DC, Fixture shall be suitable to operate at an ambient

temperature range of -10°C to +50°C. The successful bidder shall

submit the following certifications/reports for approval before

supply of materials: product data sheets, LM79. report from NABL

accredited lab, illuminance diagram, polar curve & LM80 report

issued by LED manufacturer & RoHS Compliance along with CE

Digitally signed by JAYA

INTERNAL RENOVATION WORK AT BHANJA KALA MANADAP, BHUBANESWAR

Non DSR NON DSR

Sl.no. ITEM Description of Items Unit Qnty. DSR Rate DSR Amount.

Supplying Installation, Testing and Commissioning of DMX

Controller for the system including address writer and

programming the DMX controller with the suitable designs as

decided by the Engineer-in-charge/client department ( not less

than 10 nos designs) and all other accessories required for the

running of the system Controller should have Input Power 5-5.5V

DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe

should work in Stand Alone Mode and 2 universe should work in

live mode with laptop/ tablet / computer. The universe should be

expandable from 2 to 4 DMX512 universes. It should be compatible

for Programmability with PC, Mac, Tablet, Smartphone by using

USB & Ethernet. Dmx controller should have network controllability

feature to control the scene remotely through LAN and triggered

via UDP packets on port 2430. It’s must have Connections Type C

USB, XLR3, Ethernet, battery. There should be provision for

Memory microSD card. Device should have Intuitive backlit

keyboard with 10 presents and also have provision of keypad on

device for changing scene manually from device. Device should be

capable to work on Extended triggering possibilities (TCA) & also

have Smart Upgrade Technology (SUT). It is an IP 20 unit and has

an Operating Temperature of 0°C to 50°C.OS Requirements for the

controller is Mac OS X 10.8-10.12, Windows 7/8/10/11. Standards

should be EC, EMC, ROHS. The controller should have a variety of

features including 2048 DMX channels, clock/calendar, iPhone/iPad

/Android remote control, Ethernet facilities, dry contact port

Supplying and multi-zone

Installation, SD card

Testing andmemory. Networkof DMX Splitter

with Input Voltage range : 190-240V AC, Power Consumption 5W

max. Housing is made of CRCA with powder coated finish

Mounting, 19 inch rack mountable, Operation Temperature - 30°C

to +55°C, 8 Output with 3pin XLR terminal sockets, Ingress

Protection Rating IP20. This unit takes the DMX Signal from DMX

7 19.6.1 Controller & split the signal into 8 separate output channels. The nos 40 6,224.00 2,48,960.00

output terminals of Splitters are optically isolated from the input.

Splitters should be capable to amplify the DMX signal & allowing

the data link to be extended by max. 300 m (1044 ft.) using AWG

22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or

maximum 20-25 fixture per output channel. To be provided with IP

enclosure if installed in external environment etc., complete as

Supplying Installation, Testing and Commissioning of DMX Cable

8 NDSR shielded 5 pin XLR aluminium + braided copper shielded FRLS mtr 3000 375.00 11,25,000.00

having 24AWG tinned copper conductor

Supplying ,installing,testing of 7W step light ,ip-66, mono colour

(warm white) for mounting in junction box arranement

Supplying and fixing of encloser ip-65 for dmx controller and

Supplying and Fixing of 5 pin XLR Male/Female connectors having

5 pole cable connector, Male/Female connector with improved

latch, cage type contacts, "solder stop" for easy soldering, and

additional ground contact for best contact integrity between chassis

and cable connector. More durable housing for maximum reliability

etc as required.

supplying , installation, testing, commisioning of Moscow linear

driver converter 150W for linear wall washer ,potted driver

supplying , installation, testing, commisioning of Moscow linear

driver converter 200W for linear wall washer ,potted driver

Supply, Installation, testing and Commissioning of Astronomical

timer panel for above façade lights

15 NDSR Commissioning and Programming of Façade lighting unit 1 7,00,000.00 7,00,000.00

SITC of Lightning Arrester complete with mast, down conductor,

earthing and accessories as required.

Digitally signed by JAYA

RENOVATION OF BHANJA KALA MANDAP, BHUBANESWAR

Sl.No Item Description (SITC Basis) Qty Unit DSR Rate NDSR Rate DSR Amount NDSR Amount

SITC of Main Line Array Speaker System – 2-way active/passive line array speaker,

1 NDSR minimum 12" LF + HF compression driver, 1000W RMS or above, coverage suitable for 32 4 Nos 3,20,000.00 12,80,000.00

m throw, rigging accessories included

SITC of Dual 18" Powered Subwoofer – minimum 2000W RMS for auditorium low

frequency reinforcement

SITC of Wall Mounted Delay/Fill Speakers – 6"–8" two-way cabinet loudspeaker,

120W–250W RMS, 90°×90° coverage or better

4 NDSR SITC of Stage Monitor Speakers – 12" monitor speaker for podium/stage foldback 1 Nos 95,000.00 95,000.00

SITC of Digital Audio Mixer – minimum 24 channel digital mixer with scene memory, Dante

SITC of Digital Signal Processor (DSP) – Dante enabled DSP with AEC, 16 input, 8 output,

feedback suppressor, delay tuning, USB conferencing

7 NDSR SITC of Power Amplifier – 4-channel Class-D amplifier 4 × 1000W or better 2 Nos 3,10,000.00 6,20,000.00

8 NDSR SITC of PTZ Camera – Full HD 60fps, 20× optical zoom, HDMI + USB + IP + PoE 2 Nos 2,80,000.00 5,60,000.00

9 NDSR SITC of Wireless Handheld Microphone – Digital UHF, rechargeable, minimum 90 channels 4 Set 1,40,000.00 5,60,000.00

10 NDSR SITC of Wireless Lapel Microphone – bodypack transmitter with lavalier mic 2 Set 1,55,000.00 3,10,000.00

11 NDSR SITC of Gooseneck Podium Microphone – 450 mm condenser gooseneck microphone 2 Nos 35,000.00 70,000.00

12 NDSR SITC of Conference Table Gooseneck Microphone with Base 8 Nos 42,000.00 3,36,000.00

13 NDSR SITC of 8/16 Port Managed PoE Network Switch 1 Nos 75,000.00 75,000.00

14 NDSR SITC of Equipment Rack – 42U rack with cooling fan, PDU and cable manager 1 Nos 90,000.00 90,000.00

15 NDSR SITC of Audio Visual Control Processor & Touch Panel 1 Set 5,40,000.00 5,40,000.00

16 NDSR SITC of Laser Projector (8000 ANSI Lumens) 1 Nos 9,60,000.00 9,60,000.00

17 NDSR SITC of 220" Motorized Projection Screen 1 Nos 4,35,000.00 4,35,000.00

18 NDSR SITC of HDMI Matrix / Switcher 1 Nos 2,45,000.00 2,45,000.00

19 NDSR SITC of CAT6 + HDMI + XLR + Speaker Cable + Connectors 1 LS 5,50,000.00 5,50,000.00

20 NDSR SITC of Installation, Programming, DSP Tuning, Testing & Commissioning 1 LS 5,50,000.00 5,50,000.00

Networking & CCTV

1 DSR 2025 39.18.1 SITC of CAT6A UTP Cable 23 AWG complete in all respect as required. 2500 Mtr 74.00 1,85,000.00

SITC of CAT6A UTP 24 port jack panel Loaded (Data/Voice)complete in all respect as

3 NDSR SITC of CAT6A UTP Information outlet jack with dust cover for Data/Voice field side. 10 Each 762.00 7,620.00

4 NDSR SITC of CAT6A UTP single port face plate complete in all respect as required. 10 Each 305.00 3,050.00

5 NDSR SITC of CAT6A UTP duplex port face plate complete in all respect as required. 10 Each 320.00 3,200.00

6 NDSR SITC of CAT6A UTP Patch Cords 1 Meter Complete in all respect as required.(Data) 20 Each 499.00 9,980.00

7 NDSR SITC of CAT6A UTP Patch Cords 2 Meter Complete in all respect as required. (Data) 20 Each 560.00 11,200.00

8 NDSR SITC of 6 Core OFC multimode 50 micron OM3 in all respect as required. 20 Mtr 217.00 4,340.00

9 NDSR SITC of pigtail LC/SC 1 Meter OM3 Complete in all respect as required. 10 Each 559.00 5,590.00

10 39.21.3 SITC of 24 port LIU loaded complete in all respect as required. 10 Each 10,049.00 1,00,490.00

Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing

Rack with Main Frame Pillar of 1.6mm CRCA Sheet with removable side panels, L- Shape

adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down

condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable

entry/exit provision at top and bottom with rubber protection, Front door 5mm Each 32,954.00 65,908.00

Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated

door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets

16A power distribution units, 3 numbers closed cable organizer, Hardware mounting

screws packet of 20 x 1 number, etc. complete as required.

Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing

Rack with Main Frame Pillar of 1.25mm Powder Coated CRCA Sheet with removable side

panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely

knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 5nos

two line cable entry/exit provision at top and bottom with rubber protection, Front door Each 21,201.00 1,48,407.00

5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or

perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6

sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware

mounting screws packet of 20 x 1 number, etc. complete as required.

SITC of 2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome Camera with 2.8/ 3.6mm fixed

14 40.11.1 SITC of 32-ch IP camera NVR, complete with License 1 Nos. 64,784.00 64,784.00

15 40.12.3 SITC of 8TB HDD for CCTV CAM 6 Nos. 20,119.00 1,20,714.00

16 42.4.3 SITC of 55" LED Display for CCTV CAM 2 Nos. 82,057.00 1,64,114.00

Digitally signed by JAYA

RENOVATION OF BHANJA KALA MANDAP, BHUBANESWAR

Sl.No Item Description (SITC Basis) Qty Unit DSR Rate NDSR Rate DSR Amount NDSR Amount

SITC of Univerge Business Communication Server Model NEC SV9100 (OR Equivalent as per

17 NDSR approved makes) Equipped with 08 Digital Extensions and 296 Analogue Extensions ( 1 Nos. 8,51,053.00 8,51,053.00

IPABX) complete with License

SITC of IP Telephone Model No. NEC ITK-24CG-1P (OR Equivalent as per approved makes)

18 NDSR with 3 line LCD display and 24 Programmable Keys with BLF ( IP Telephone) complete with 4 Nos. 22,744.00 90,976.00

SITC of Digital Telephone Model No. NEC DTK-12D-1P (OR Equivalent as per approved

19 NDSR makes) with 3 line LCD display and 12 Programmable Keys with BLF ( IP Telephone) 5 Nos. 18,342.00 91,710.00

complete with License

SITC of Digital Telephone Model No. NEC DTK-6D-1P (OR Equivalent as per approved

20 NDSR makes) with 3 line LCD display and 6 Programmable Keys with BLF ( IP Telephone) complete 10 Nos. 14,673.00 1,46,730.00

21 38.4 SITC of Analog Phones 20 Nos 1,544.00 30,880.00

22 NDSR SITC of 10GBASE-LR SFP Module. 20 Nos 14,452.00 2,89,040.00

Digitally signed by JAYA

RENOVATION OF BHANJA KALA MANDAP, BHUBANESWAR

ELECTRICAL - LIGHTNING PROTECTION SYSTEM

Sl.No Item Description (SITC Basis) Qty Unit DSR Rate NDSR Rate DSR Amount NDSR Amount

Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of

engineer in charge

Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female

thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and

temperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter

distance.Tested as per IEC 62561. as per direction of engineer in charge.

Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with

3.00 NDSR bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 16.00 Nos. 280.00 4,480.00

meter distance. Tested as per IEC 62561.

Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal

4.00 NDSR bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece 14.00 Nos. 290.00 4,060.00

Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet

5.00 NDSR the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC 6.00 Nos. 1,300.00 7,800.00

62561. Tested for 100kA lightning current.

Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -

6.00 NDSR 62305 part-3 Nominal size Ø10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E- 2.00 Nos. 5,900.00 11,800.00

AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561.

Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of

frost resistant concrete and clamp testedupto 100KA lightning current .

8.00 NDSR Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. 4.00 Nos. 1,500.00 6,000.00

Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by

9.00 NDSR 30x3 mm GI strip as specified in drawing and directed by Engineer.Tested for 100kA 6.00 Nos. 800.00 4,800.00

lightning current.

Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint

.Internal dimensions: 100x100x48 mm

Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground

as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561.

Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip.

Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current.

Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder

13.00 NDSR bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from 10.00 Nos. 310.00 3,100.00

polyamide, black. Tested as per IEC 62561.

Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width

50mm. Made of petrolatum- coated chemical fibre fabric.

Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre

15.00 NDSR electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as 6.00 Nos. 7,900.00 47,400.00

per IEC 62561-2

16.00 NDSR Supply of universal clamp made of SS to connect rod with flat conductor 6.00 Nos. 1,070.00 6,420.00

Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as

per IEC 62561-7,TCLP tested

Supply of The above arrangements shall be provided with Heavy duty earth champer of

5000kg load bearing capacity to ensure the safety of earthing system

Installation of The above arrangements including all accessories as per Direction of Engg. In

Digitally signed by JAYA

BOQ FOR FIRE SAFETY (HYDRANT & SPRINKLER SYSTEM)

DSR 2025 DSR NDSR

SL.NO DESCRIPTION UOM QTY DSR Rate NDSR Rate

E&M /MR AMOUNT AMOUNT

P-2 Hydrant network- piping -

Providing, laying, testing & commissioning of 'B' class

medium duty G.I. pipe conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall/ceiling -

with suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required shade

1 complete as required

Supplying and fixing single headed internal hydrant valve

with instantaneous Stainless Steel coupling of 63 mm dia

2 27.9.2 with cast iron wheel ISI marked conforming to IS 5290 Nos 6 6,632.00 39,792.00

(Type -A) with blank Gunmetal/Stainless Steel cap and

chain as required

Supplying, fixing, testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

3 DSR marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required

27.11.6 a. 150mm Butterfly Valve Set 2 9,737.00 19,474.00

27.11.5 b. 100mm Butterfly Valve Set 1 7,271.00 7,271.00

27.11.4 c. 80mm Butterfly Valve Set 1 5,406.00 5,406.00

NDSR Supply & Installation of SS Ball Valve -

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe

with 63 mm dia male and female couplings duly bound with

GI wire, rivets etc. conforming to IS 636 (type-A) as

Supplying and fixing first-aid Hose Reel with MS

construction spray painted in post office red, conforming to

IS 884 complete with the following as required. a) 20 mm

nominal internal dia water hose thermoplastic (Textile

27.17.2 reinforced) type -2 as per IS: 12585 (b) 20 mm nominal Set 6 17,034.00 1,02,204.00

6 internal dia gun metal globe valve & nozzle. (c) Drum and

brackets for fixing the equipmets on wall. (d)Connections

from riser with 25 mm dia stop gun metal valve & M.S. Pipe

Supply & Installation of fire Hose cabinet

Supplying & fixing 63 mm dia branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903

suitable for instantaneous connection to interconnect hose

pipe coupling as required

Supplying and fixing of fire brigade connection of cast iron

body with gun metal male instantaneous inlet couplings

8 27.19.2 complete with cap and chain as reqd. for suitable dia MS Set 1 14,820.00 14,820.00

pipe connection conforming to IS 904 as require.4 way

Providing, fixing, testing & commissioning of 15mm dia

9 27.21.1 quartzoid bulb type pendent sprinklers of rating 68 0C with Nos 30 599.00 17,970.00

required accessories

Providing, fixing, testing & commissioning of 15mm dia

10 27.21.2 quartzoid bulb type upright sprinklers of rating 68 0C with Nos 30 599.00 17,970.00

required accessories

Providing, fixing, testing & commissioning of 15mm dia

11 27.21.3 quartzoid bulb type horizontal wall sprinklers of rating 68 Nos 30 699.00 20,970.00

0C with required accessories

Digitally signed by JAYA

BOQ FOR FIRE SAFETY (HYDRANT & SPRINKLER SYSTEM)

DSR 2025 DSR NDSR

SL.NO DESCRIPTION UOM QTY DSR Rate NDSR Rate

E&M /MR AMOUNT AMOUNT

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure

12 27.25 of 875 PSI (Burst) with branch line (Inlet) 25mm

NPT male thread to sprinkler head (Outlet) 15mm

NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing, installation, testing & commissioning of

13 DSR 27.29 adjustable rosette plate for 15mm dia in white finish Nos 30 264.00 7,920.00

UL Listed or FM approved complete as required.

P-3 NDSR Other Fire Accessories ….. - -

Providing ,fixing , testing and commissioning of Portable

ABC powder type fire extinguisher 6 Kg capacity.

Providing ,fixing , testing and commissioning of Portable

Carbon-di-oxide Gas Type Fire Extinguisher 4.5 Kgs.

3 NDSR Fire bucket stand Nos 1 3,658.00 - 3,658.00

4 NDSR Fire Exit Signage Nos 10 550.00 - 5,500.00

5 NDSR Fire bucket Nos 4 750.00 - 3,000.00

Digitally signed by JAYA

RENOVATION OF BHANJA KALA MANDAP, BHUBANESWAR

BOQ FOR FIRE PUMP HOUSE

DSR 2025 DSR NDSR

SL.NO. DESCRIPTION UOM QTY DSR RATE NDSR RATE

E&M/NDSR AMOUNT AMOUNT

Hydrant Pump, piping & accessories

(a) Supplying, installation, testing and commissioning of

Electric driven Main Fire Pump conforming to IS 12469: 2019

suitable for automatic operation and consisting of following,

complete in all respects, as required : (b) Horizontal type,

multistage, centrifugal, split casing pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal as

required. (c) Suitable HP Squirrel cage induction motor, TEFC,

synchronous speed 1500 RPM, suitable for operation on 415

volts, 3 phase 50 Hz, AC supply with IP 55 protection for

enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-12615: 2018. (d) M.S. fabricated

Common base plate, coupling, coupling guard, foundation

bolts etc. as required. (e)Suitable cement concrete foundation

duly plastered with anti vibration pads.2850AT 70M HEAD

a) Supplying, installation, testing and commissioning of diesel engine

driven main fire pump conforming to IS 12469: 2019 suitable for

automatic operation and consisting of following, complete in all

respects, as required : (Diesel Driven Pump) (b) Horizontal type,

multistage, centrifugal pump of cast of iron body and bronze

impeller with stainless steel shaft, mechanical seal as required (c)

Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant IS standard complete with auto starting

mechanism, 12 /24 volts electric starting equipment, diesel tank,

exhaust pipe extended upto 10 m outside pump house duly

2 27.2.8 insulated with 50 mm thick glass wool with 1.0 mm thick aluminium Nos 1 6,10,000.00 6,10,000.00

sheet cladding, residential silencer, instruments and protection as

per standard specification, stop solenoid for auto stop in the event

of fault with audio indications, painted with post office red colour

etc. as required. (d)M.S fabricated, common base plate, coupling,

coupling guard, foundation bolts etc. as required. (e) Suitable

cement concrete foundation duly plastered and with anti vibration

pads.1620LPM AT 70M HEAD

(a) Supplying, installation, testing and commissioning of electric

driven pressurisation pump conforming to IS 12469: 2019 suitable

for automatic operation and consisting of following, complete in all

respects, as required : (Jockey Pump) (b)Horizontal type, multistage,

centrifugal pump of cast iron body and bronze impeller with

stainless steel shaft, mechanical seal as required. (c)Suitable HP

squirell cage induction motor TEFC type suitable for operation on

3 27.3.2 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for Nos 1 98,000.00 98,000.00